question by William Muir

Similar Questions

• WILLIAM HILL POKER

  When you play poker h w, it is very slow going so slow that I can't not react in time and eventually be seated outside, the cursor also blinks all the time, it doesn't happen on this site, tried everything I can think, can anyone help please, william Hill said that all is well with the site

  Hello

  What browser do you use?

  Try the following steps:

  Step 1: If you use Internet Explorer, then disable all add-ons except the Flash Player plug-in browser and check if the problem persists.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

  Step 2: Uninstall and reinstall the software of William Hill poker on your computer.

  Step 3: Perform a clean boot in order to check whether a third-party program or service that runs in the background is the source of the problem.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  If nothing helps, so please get in touch with William Hill Poker support for assistance.
  http://www.williamhillpoker.com/support/FAQ.htm#support

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• Questions on the retention period of Audit SACLS log (FS7600-FluidFSv4)

  Hello

  To save the audit log SACL for a year.

  However, I couldn't find the setting of shelf life.

  I have two questions.

  1.) is it possible to change the retention period?

  (2.) what is the default value of the retention period?

  Please me advice.

  Config #SACL # #.

  Node0:supportShell > cliUtil management

  CLI > NAS - volumes change advanced settings - - SACLAuditPolicy< success&failure="" failure="" success ="" none="">

  CLI > display NAS-volumes

  CLI > list audit events

  #####

  Better subject.

  Kensuke Maeda

  Kensuke-san,

  My apologies for the late reply.  The journal of the SACL allows to store up to 100 000 events before flipping and overwrite older events.   There is no way to change this value.

  With respect,

  Don Williams

• Cisco SRP 527W questions

  Hello, I have a few questions on the router from cisco srp 527w

  First of all she has a built-in modem

  second question is, where can I get updates firmware for it.

  Please don't tie me to the manual I read it and could not find the relevant info.

  Thanks for the replies

  William

  Hi William:

  To address your first concern, this router supports the connection ADSL2 + annex a (ADSL over POTS) relay. You can also use some 3G USB modems with this router.

  You can find firmware updates in the Software Download Center. This link , you should get just for downloads of series SRP520, but if not just search in the first link dowloads series SRP500.

  Hope that helps.

  Best,

  David

  Please evaluate the useful messages.

• When I type a question in the search box, I want that my question to stay there until I checked all the results of the research

  I have Windows 7-64 bit

  When I type a Question in the search box, I want my Question to stay there, until I checked all the search results!

  Whenever I have check a result, my question goes, and then I have to type my Question even once! We don't waste any the end of time!

  My Question must stay there until I've done my research and I hit another Question!

  Thank you.

  N.Williams.

  Original title: Windows search problem

  Hello

  If you run a search in Windows 7 from the Start Menu search box, the search string is not saved in the search box. This is normal.

  However, if you are looking for using the search box on the upper right corner of the Windows Explorer window, the search string is saved in the search box and stays there until you delete it or close the Windows Explorer window.

  Reference links:

  Windows Search in Windows 7: http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-search

  Find what you are looking for: http://Windows.Microsoft.com/en-us/Windows7/help/find-what-you-are-looking-for-staying-organized-in-Windows-7

  Hope this information helps.

• Question: Which product?

  What product Adobe do I need to make comments, Annotations and annotations of drawing on PDFs with Adobe Reader?

  Thank you.

  -Bill

  Hi William,.

  Adobe Reader is capable enough to provide you with these features, please refer to this KB doc. helps Acrobat | Commenting in a PDF file.

  You can download the latest Adobe Acrobat Reader-DC using this link Adobe Acrobat Reader DC install for all versions.

  Let me know if you have additional questions, we will be happy to help you.

  Kind regards

  Nicos

• Question about performance statistics

  William-

  I was looking on the 'doc' House to see if there was reference to the period of time represented in the performance data given in the output of the script.

  Can you tell me what we actually with the host / cluster (CPU, memory) performance statistics?

  Also - I was wondering why "ESX/ESXi Hardware Configuration" includes CPU utilization and memory - that's just how the API works?  It just seems odd to include these data with summary material...

  Forgive the noob questions (and anything that might follow) I (FINALLY) movement in a project that will allow me to work much more consistent with the API, and this script makes so much to make my life easier.  We put the spotlight on performance and the ability of prediction, so I'll try to learn what can offer the API (overlooking DOCS 9840 & 10665 as time lost...)

  Thank you!
  Don

  These are just rough summary level a time interval counters, if you are looking for granular performance information, you will need to look in performanceManager which is the entitity wherein you will get more details.

• question about HostConnect()

  I am new to VMware vCenter and VIX. I've read up, but I still have some confusion on the use of PERL VIX API 1.8.1.

  Let me explain what I'm trying to make sure someone can tell me what I am doing wrong.

  I used vCenter Lab Manager to create and deploy a virtual machine. I have the external IP address of the virtual machine and the host information given by the Director of the laboratory. I guess that this host is the host on which I need to use HostConnect(). Currently I get 3014 insufficient permissions on the host OS.

  I want to know what host address am I supposed to put in Hoteconnectez? vCenter server? Or have the ESX server virtual machines? and where can I get this information?

  If you take a look at the VIX API documentation, Hoteconnectez can accept a variety of supported ESX (i), vCenter, workstation, etc.

  So you can either pass the vCenter server or directly pass the host ESX (i), and then locate the computer virtual in question get the VM handle for further processing. There is also an excerpt from the sample code at the bottom of each of these methods listed in the API documentation, make sure just that your URL is correct, because it requires the 'https://' and ' / sdk ' string

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• What is the best way to cause a VM enter the pending state question?

  I work for a small company that makes a product that allows for the management of Virtual Infrastructure of a SmartPhone (BlackBerry, iPhone, Android etc.) and I want to test our feature that allows you to answer questions VM. But I can't find an easy way to get a virtual machine with a question! Then...

  What is the best way to cause a VM enter a State of "pending issue"? We have vms (200 x, XP) windows and some linux vms.

  Thank you!

  fly to roveit.com

  The easiest way is to copy a virtual machine and it associated the file and when you move it over a data store different and you just update the descriptor entries + VMDK file VMX, one thing people forget to do is also updating uuid.location that refers to the data UUID store. When you try to turn on the virtual machine, you will always have a question asking if you want to

  (1) cancel

  (2) I_moved it

  (3) I_copied it

  Now to replicate this and always get it without copying files is quite simple and takes< 1min.="" create="" a="" dummy="" vm,="" call="" it="" whatever="" and="" you="" don't="" even="" need="" to="" allocate="" much="" space,="" 1gb="" thin="" will="" do.="" you'll="" then="" want="" to="" unregister="" the="" vm,="" right="" click="" and="" remove="" from="" inventory,="" don't="" delete.="" now,="" you'll="" need="" console="" access="" to="" the="" vm's="" .vmx="" file,="" use="" either="" the="" classic="" esx="" service="" console="" or="" unsupported="" busybox="" console.="" if="" you="" have="" access="" to="" neither,="" then="" you="" can="" use="" the="" datastore="" browser="" to="" download="" the="" .vmx="" and="" make="" your="" changes="" and="">

  I'll assume you have console access, go to the data store where the configuration of the virtual machine is stored. Edit the file and look for the entry "uuid.location" and simply change the first two numbers to do anything, say 11 and then save the file. Now return to the store of data browser and re - register your virtual machine, your VM should now appear once again and then try to turn on the virtual computer. If everything was done correctly, you will get a question arises for the virtual machine and it will not until he said.

  You can probably even write a shell script that will copy a backup .vmx file and re-save to automate this process as you write your script/program.

  =========================================================================

  William Lam

  VMware vExpert 2009

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Questions about ESX + UPS Solutions and soft stop

  Hello everyone.  I am very new to VMWare, so please pardon my beginner questions and I hope I have posted this in the correct location.

  I am currently working as a developer for Tripp Lite.  Our companion based on SNMP ups (UPS) software product is the sequel to PowerAlert, and I received a few days worth of time to do more research on the possibility of supporting VMWare ESX/ESXi and stop the server.  I did some research on this last month, where I found the scripts by William Lam and an alternative SSH (http://vmwaretips.com/wp/2009/01/16/mass-vm-shutdown-script/).

  I understand there are a few methods scripted to make judgment, which one can be found here: http://viops.vmware.com/home/docs/DOC-1341.  A second solution is to install APC PowerChute interface (available only on ESXi?) command line.

  The main issues I have at the moment are:

  1 can all install VIMA?  Is a closure that installs on VIMA and runs from this platform a viable, or is the command-line support interface option a must - have for the general user base?  VIMA and the developer (http://www.vmware.com/support/developer/vima/vima10/doc/vima10guide.pdf) Administrator's Guide leads me to believe that anyone can install VIMA, and that it just comes not preinstalled on servers that are provided with the interface of the console.

  2 can. a person there will now be a licensing problem with the help of scripts to stop lamw? Speculate as to whether or not this issue affects most of the users? Initially, I found the related commentary here: http://www.engineering.ucsb.edu/~duonglt/vmware/ .  The comment was that a new revision of ESXi "may not allow write operations and require that the user purchases or licenses ESXi to take full advantage of the API of VI (read/write).  William Lam also said in another forum thread, "" If you use at least allowed Foundation or ESX classic, then this script will work. ". Please take a look at the documentation for more details. "What documentation is specifically intended and where I could see him again?

  3. the VIMA Administrator's and Developer's Guide also shows you get a 64-bit Enterprise Linux when you install VIMA.  Does anyone know which kernel version is it? (I'm not any kind of expert on Linux kernels.)  The APC Linux software seems to be installable on the interface of the console; What kernel and the kernel version that would be based on?

  It is type of a crazy thought, but in cases where the stop scripts will not work due to license issue, any who would consider even install on all virtual machines stop SNMP agent software and the configuration of the inverter to launch the stop on all virtual machines? (as an alternative to buying the ESX license...)   Or all the virtual machines share the same IP address?

  Thanks in advance for reading and review.  The answers, suggestions, links etc. are much appreciated.

  Xochitl djamal

  Tripp Lite Software Engineer

  (1) Yes, VMware VIMA is a free VAPP (Virtual Appliance), it is currently sinking a stripped down RHEL 5.2 x 86-64, it comes on pre-installation with the VI Perl Toolkit & RCLI (renamed to become vSphere SDK for Perl & vCLI) that uses the API VMware SDK and to communicate with hosts to vCenter/ESX (i)

  (2) the license situation is also explained here http://vmetc.com/2009/03/31/esxi-u4-ends-free-version-read-and-write-access-from-the-rcli/ this is something vs VMware licenses something with my scripts, you also have some alternatives, including VMware VIX http://communities.vmware.com/thread/205815

  3)

  [vi-admin@vima ~]$ cat /etc/vima-release
  VIMA 1.0.0 BUILD-124829
  
  Copyright @ 1998-2008
  VMware, Inc. All rights reserved. Protected by one or more of U.S. Patent Nos.
  6,397,242, 6,496,847, 6,704,925, 6,711,672 , 6,725,289 ,6,735,601 ,6,785,886
  ,6,789,156 ,6,795,966 ,6,880,022 ,6,944,699 ,6,961,806 ,6,961,941 ,7,069,413
  ,7,082,598 ,7,089,377 , 7,111,086, 7,111,145, 7,117,481, 7,149,843, 7,155,558,
  7,222,221, 7,260,815, 7,260,820, 7,269,683, 7,275,136, 7,277,998, 7,277,999,
  7,278,030 , 7,281,102, 7,290,253, 7,356,679 ; patents pending.
  
  VMware, the VMware "boxes" logo and design, Virtual SMP and VMotion are
  registered trademarks or trademarks of VMware, Inc. in the United States and/or
  other jurisdictions. All other marks and names mentioned herein may be
  trademarks of their respective companies.
  

  [vi-admin@vima ~]$ uname -a
  Linux vima.primp-industries.com 2.6.18-92.el5 #1 SMP Tue Apr 29 13:16:15 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
  

  [vi-admin@vima ~]$ cat /etc/redhat-release
  Red Hat Enterprise Linux Server release 5.2 (Tikanga)
  

  with the release of vSphere, a new version of vMA should also be discontinued which has some changes, but the underlying system of RHEL is exactly the same.

  Currently, the ideal situation is to be able to install some type of management on VMware VIMA/vMA agent to monitor your UPS device, whatever that may be, and then use the VMware API to properly host and the VM (s) to stop. To be able to do this, you will need your ESX/ESXi product to be certified at least the license to the Foundation, otherwise the VI API is only read-only which means that you will not be able to perform all the operations that are useful against the VM (s) or guests. If you are looking to develop a management agent that will install on VMware which is probably an interesting feature of the 3rd part, I consider to communicate with VMware and more information as a partner. You can also develop your product on ubuntu or any UNIX/LINUX OS open and distribute a paralytic that can run out of the box after download.

  The real witch hunt, this is how you'll be powering down of the VM (s) / hosts and even once, ideally, we would like to use the VI API, but you'll be govered by the VMware licensing policy and this is how you sell your product in order to ensure that your customers use at least the Foundation license and can not only use the FREE ESXi version and use your UPS utility and expect it to work.

  I hope this puts you in the right direction =)

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• TypeKit questions: arrested fonts rendering in IE 9 and Firefox, etc

  Hello

  A few days ago, we have created an edge animation that uses a Typekit, put police in animation on a web page built with Muse and downloaded that creative cloud site.  Everything worked perfectly on IE, Firefox and Chrome (although the rendering of Chrome all fonts on this site is a little blurry compared to IE and Firefox.)

  Then, yesterday, we noticed that the fonts Typekit has not been made in Firefox; and we noticed that, today, it is renderingin IE.  (Always, displays a little blurry, on Chrome).

  Is this a known issue? Any tips?

  Also: typekit never made the Opera browser fonts (when viewing the hosted site, or when you use overview at the controls of the browser side animate or Muse).

  Also the site has never worked in Safari for Windows

  Thank you

  Richard (William Anderson)

  I would like to ask your question on in aid of Typekit that is here https://typekit.com/help or you can email [email protected].

• SQL MORE QUESTIONS

  According to the tables and the attributes below, I need solve 25 questions. I answered some of them and some of them I couldn't solve. I need your help please.
  
  School (sch_name, sch_phone, sch_code, sch_dean)
  Advisor (adv_code, adv_fname, adv_lname, adv_phone, sch_code)
  Major (maj_code, maj_desc, sch_code)
  maj_adv (maj_code, adv_code)
  student (std_code, std_lname, std_fname, std_gend, maj_code, std_dob)
  rank (std_code, gr_lname, gr_fname, gr_t1, gr_t2, gr_hw, gr_pr)
  
  
  create table school
  (sch_code varchar2 (8) school_sch_code_pk primary key constraint,)
  sch_name varchar2 (50).
  sch_phone varchar2 (12),
  sch_dean varchar2 (20));
  
  insert into the values of the school ('BUS', "School of Business", 281-283-3100', 'Ted Cummings');
  insert into the values of the school ("EDU", «School of Education», 281-283-3600', "Dennis Spuck");
  insert into the values of the school ("MSM", "School letters" and Human Sciences, ' 281-283-3333', "Bruce Palmer");
  insert into the values of the school ('DRY', 'school of Science and engineering', ' 281-283-3700', "Sadegh Davari");
  
  create table Advisor
  (adv_code varchar2 (08) advisor_adv_code_pk primary key constraint,)
  adv_lname varchar2 (15).
  adv_fname varchar2 (15).
  adv_phone varchar2 (12),
  sch_code varchar2 (8) constraint advisor_sch_code_fk references school (sch_code));
  
  insert into portfolioadvisor ('A1', 'Porter', 'Mattie', ' 281-283-3163', 'BUS');
  insert into portfolioadvisor ("A2", "Grady", "Lost", 281-283-3400', 'BUS');
  insert into portfolioadvisor ("A3", "Tran", "Van", 281-283-3203', 'BUS');
  insert into portfolioadvisor ('A4', 'Sale', 'Nili', 281-283-3202', 'BUS');
  insert into portfolioadvisor ("A5", "Kwok-good', 'Yue', 281-283-3864', 'SEC');
  insert into portfolioadvisor ("A6", "Jones", "Lisa", ' 281-283-3551', "EDU");
  insert into portfolioadvisor ("A7", "Palmer", "Bruce", 281-283-3445', "MSM");
  
  
  create major table
  (maj_code varchar2 (10) major_maj_code_pk primary key constraint,)
  maj_desc varchar2 (30),
  sch_code varchar2 (8) constraint major_sch_code_fk references school (sch_code));
  
  insert into large values ('ACCT', 'Accounting', 'BUS');
  insert into the great values ('Ministers', 'Finance', 'BUS');
  insert into large values ("ISAM", 'Management Information systems', 'BUS');
  insert into large values ('SMK', 'Computer Science', 'DRY');
  insert into large values ('HIST', 'History', "MSM");
  insert into large values ("INST", "Instructional Technology", "EDU");
  
  create the table maj_adv
  (maj_code varchar2 (10) constraint maj_adv_maj_code_fk main references (maj_code),)
  adv_code varchar2 (08) constraint maj_adv_adv_code_fk references Advisor (adv_code).
  constraint maj_adv_maj_code_adv_code_cpk primary key (maj_code, adv_code));
  
  insert into maj_adv values ('ACCT', 'A1');
  insert into maj_adv values ("ACCT", "A2");
  insert into maj_adv values ("Ministers", "A2");
  insert into maj_adv values ("ISAM", "A3");
  insert into maj_adv values ("ISAM", "A4");
  insert into maj_adv values ("CSCI", "A5");
  insert into maj_adv values ("INST", "A6");
  insert into maj_adv values ("HIST", "A7");
  
  
  create table students
  (std_code, varchar2 (9))
  std_lname varchar2 (15) constraint student_std_lname_nn not null,
  std_fname varchar2 (15) constraint student_std_fname_nn not null,
  std_gend varchar2 (8).
  maj_code varchar2 (10) constraint student_maj_code1_fk main references (maj_code).
  date of std_dob,
  constraint student_std_code_pk primary key (std_code));
  
  insert into student values ('S1', 'Jordan', 'Michael', 'F' 'Ministers', to_date (10 March 1962 ',' Mon-DD-YYYY ""));
  insert into student values ('S2', 'Barkley', 'Charles, m', null, to_date ('12-Sept-1964, ' Mon-DD-YYYY ""));
  insert into student values ('S3 ', 'Johnson', 'Magic', am ', 'ACCT', to_date ('13-Sep-1960, ' Mon-DD-YYYY ""));
  insert into values student ("S4", "Williams', 'Serena', 'F', 'ISAM', to_date (October 23, 1980 ',' Mon-DD-YYYY" "));
  insert into student values ('S5', 'Duncan', 'Tim', am', 'ISAM', to_date (August 7, 1972 ',' Mon-DD-YYYY'));
  insert into values student ("S6", "Graff", 'Steffi', 'F', 'SMK', to_date (30 April 1962 ',' Mon-DD-YYYY ""));
  insert into values student ("S7", "Navratilova", "Martina", 'F', 'ACCT', to_date (18 December 1972 ',' Mon-DD-YYYY ""));
  
  NOTE Insert student (std_lname, std_fname, std_code, std_dob)
  NOTE values ('S2', 'Barkley', 'Charles', to_date('12-Sep-1964','DD-Mon-YYYY'));
  
  create the table class
  (std_code varchar2 (9) grade_std_code_pk primary key constraint)
  constraint grade_std_code_fk references student (std_code).
  gr_lname varchar2 (15) constraint grade_gr_lname_nn not null,
  gr_fname varchar2 (15) constraint grade_gr_fname_nn not null,
  gr_t1 number (5), constraint grade_gr_t1_cc check (gr_t1 between 0 and 100).
  gr_t2 number (5),
  gr_hw number (5),
  gr_pr number (5));
  
  insert into rank values ('S1', 'Jordan', 'Michael', 90, 80, 98, 90);
  insert into rank values ('S2', 'Barkley', 'Charles', 60, 100, 100, 60);
  insert into rank values ('S3', 'Johnson', 'Magic', 88, 98, 96, 98);
  insert into rank values ("S4", "Williams", "Serena", 92, 92, 92, 92);
  insert into rank values ('S5', 'Duncan', 'Tim', 90, 94, 94, 96);
  insert into rank values ("S6", "Graffiti", "Steffi", 80, 83, 84, 72);
  insert into category values ("S7", "Navratilova", "Martina", 91, 88, 94, 95);
  
  the questions are:
  
  Give the following commands:
  
  1 the names of students who do not have a large.
  2 display the names of the students whose name has two "o" inside.
  3 the names of the students whose first name has an "e" in it.
  4 the names of the students whose name has exactly five characters in there.
  5 the names of students with higher test grade 2 test 1 grade.
  6 the names of pupils with grade of the project between trials 1 and 2 test classes.
  7. give the name of the student whose name begins with the character 'B' or who have never transformed into working from home.
  8. give the command that will appear two columns and one record. The first column will have the title "Major" and "ACCT" as value. The second column will have the title of 'MIS_Count' and will display the number of advisors of accounting.
  9 display the name of the student whose test 1 score is higher than the average on test 1.
  10. give the names and surname of the students who scored above average on test 1, as well as above average on the test # 2.
  11 show the date variable system using the double table.
  12. show the date variable system using the table of quality ensuring that the date is displayed only once.
  13. give the name of the student who is the oldest student and scored highest on the first try.
  14 list different majors and number of advisors for these majors.
  15 show the names of students who do not quality for any element.
  16 show the names of students who do not have at least one element.
  17 the names of students who have the same major as 'Michael Jordan'.
  18. give the names of the students whose average on test 1 and test 2 is higher than the average on the homework and project.
  19 display name and the average of the test 1 and 2 test for each student.
  20 display the number of students in the student table using three different methods.
  21. view student numbers in the table of student accountants.
  22 display the number of students of accounting and finance in the student table.
  23 show the average on the test 1 and 2 test for female students.
  24 show the number of students of accounting and finance including test 1 grades are above average on test 1.
  25 display the name of the major that has more than two students.
  
  I'm stuck with the following questions (1,12,13, 15,16,17,24) and the rest, I finished them but I'm not sure.
  Thank you and looking forward to hear your suggestions.

  Hi and welcome to the forum!

  This looks like a duty for me to be perfectly honest. When it's people are usually not willing to spoon feed answers because is not helping improve learning.

  I'll try to help if you can show me what you have tried for the issues that you are having problems with.

  Thank you!

• iOS 10 people record problem/question

  Hello

  I have a couple of "faces" in the issue of people who are coming in white, but acknowledged same 'face' of many times.  Is anyway to update it for photo comes actually?  At a few faces, I don't know that facial recognition found since it is coming from white.

  Hi JohnP007,

  Congratulations on your iPhone 7 more running iOS 10! I understand that some of your faces in the album of people pull up as a draft and you want to refresh. You can try to use the steps below to fix the faces on the thumbnails in albums.
  

  Difficulty faces and names mixed-up

  If you notice that there is a photo of someone in a collection that is poorly identified, you can remove it.

  1. Tap the person you want to remove in the album of people > select.
  2. Type Show done face to emphasize his face in every photo.
  3. Press on each photo that is not the person.
  4. Type > not this person.

  Hide people

  You can hide the people or groups that you don't want in your album of people.

  1. Open the album people and press Select.
  2. Touch the people you don't want to see.
  3. Click Hide.

  If you want to see the people that you have hidden, press on show hidden people.

  People in the Photos on your iPhone, iPad or iPod touch

  This should be corrected without delay faces. Please use the Apple Support communities to post your question. Good day.

• Questions - and answers forgotten

  How to get my 'secret' answers to the questions that I have noted the way back when?

  If you forgot the answers to your questions of security of Apple ID - Apple Support

• I can't reset the security questions. We received notice as below:

  Hello world

  I can't reset the security questions. We received notice as below:

  "Cannot reset Security Questions."

  We have insufficient information to reset your security questions. "

  Please help me as soon as possible! Thank you very much.

  Hello

  You will need to contact the Apple Support.

  The information is available here:

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

  (I'm afraid that no one here can solve the problem for you - this is a user-based community).