question card mother a6683w

Similar Questions

• Questions card mother ThinkStation D20

  Hi I was wondering the card mother D20 does support Geforce SLI? Ordinary GPU not of Quadros?

  Also I was wondering what is the shape of the motherboard? Is it E - ATX or ATX?

  Welcome to the forum

  SLI is only supported by Quadro in workstations. It is a limitation by NVidia, not Lenovo. Very few applications workstation (CAD/DCC/oil/gas/etc) supports either benefit from SLI anyway so diminishes the need of this.

  Map of the D20 system is a layout owner but closer to E - ATX. You need to change your D20 chassis if you are planning a Board from the aftermarket. The spacers will be the biggest obstacle with wiring being a close second.

• HP G6 2005AX: question card mother/basis/case hinges, now I need to pay an amount equal to laptop for repair.

  Hello HP,.

  My laptop is completely useless after 3 years of normal use.

  I sent an email to the HP service center after they sent me heavy price quote as follows:

  Fix for fraction very price at a local mobile shop, which set the motherboard by replacing a few shorted out chips with new ones, replaced the hinges and fixed same base compound and finally got.

  This saved buying me a new laptop + Win10 pro which will not come with most of the new laptops.

  Nobody called me using HP's India team.

  in any case thank you Jeffhelp and kevin-T.

• Question card mother T30

  Hello. Sorry for posting this again, but I couldn't find my old thread.  I have a t30 with a dead mobo and a t30 with a good mobo.

  the bad news: we had a trackpad (dead mobo), the other not (good mobo). can I swap the hoses and have a trackpad?

  EDIT:

  http://img258.imageshack.us/my.php?image=t30mbjuly211yg3.jpg

  I found this image of my next motherboard. I circled what I seek in red. This is the connector that the trackpad used on my death. can I just plug this one instead? That's my understanding came from this t30 not all with the option "ultranav", but that means of not able to the motherboard?

  SOLVED! I had today and fixed my t30! My advice didn't come with a trackpad, but I swapped the case and bingo! I got a restored T30! Switch to the X 86 operating system on this one project!

• Question about the HP 2AFB hand/card mother.

  I'm looking to level/add in a graphics card in my PC for games purposes. I was wondering if a GeForce GTX 710 would be able to be added to this motherboard? Any answer would be useful!

  Hello

  Your machine has appeared shortly for a special promotion, it is similar to the following machine located on different countries with the SAME montherboard

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03806462

  Figure 1: The card mother Tenby-U

  

• Satellite A100-192 card mother Question

  Hi, I need your help to indciate what is the motherboard model number for the below:

  Satellite A100-192
  Part number: PSAA9E-01Y01QAR
  Series # 56817119 G

  Appreciate your feeback.

  Kind regards
  HMI

  Hello

  It s a card mother Toshiba ;)

  But unfortunately, I didn't find useful reference numbers, but don t worry PAL advocate you the ASP in your country and could ask the compatible motherboard.

  You can ask only the part number or you can order these parts directly from the ASP.

  I think that this should t be a problem.

  Good bye

• card mother Memphis-b: b of memphis

  I bought a new case for my computer, my computer has card mother mephis - b inside and I do not know what pins match the power switch, power led, ect there at - it a model that explains what the pins are what? Help, please.

  Please try the stitching as shown in the graphic below;

  

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Card mother MS-7613 Iona: Corsair XMS 3 2 X 4 GB DDR3 1333 mhz compatible?

  Hi all.

  I have a simple question: is this compatible with the standard ram card mother MS-7613?

  http://www.Corsair.com/en/CMX8GX3M2A1333C9

  How did you select the Corsair ram?   I can't find a link suggesting its compatibility with your exact computer. I found three different modules 4 GB here who are recdommended.   Found an example of it on Amazon.

• I get a Toshiba satellite 1900-102 with a default card mother work

  Does anyone have a default Toshiba satellite 1900-102 with a card mother work and is willing to sell?

  Or does anyone know where to find that?

  Hi Erdl,

  I think this is the wrong forum to ask questions about buying used and portable defects! I understand toshiba as well as this forum is only for technical user to help!

  In my opinion, you will have more luck at ebay or used equipment selling home pages!

  Sorry
  Campino

• 8200 elite format microtour, need of care technique for card mother/PSU

  Hello.

  I'm upgrading of the power supply in my Hp Compaq 8200 Elite format microtour.

  The /PSU motherboard uses an archaic connector that looks like a connector 6-pin inline with to the (http://i20.photobucket.com/albums/b225/r4ch3t/Aux-connector-148x200.gif). But it is connected with 4 wires (red/white, white, green, purple)

  To upgrade the PSU, I need to find a way to connect it to the new motherboard, but I can't find any information or datasheet for the motherboard or the power supply.

  Motherboard:

  SP #611834-001

  DG #611794-000

  PSEYU0JCY0W197

  AS #611793-003

  0J REV

  POWER SUPPLY:

  Model: PC9057

  PART NUMBER: 611483-001

  ALTERNATIVE NUMBER: 613764-001

  Where can I find more information about the card mother/PSU?

  What is the connector? It is standardized in some way?

  What is the combo of tensions/soil necessary for the pins?

  Thank you

  Your question would be better served in theHP Enterprise business community.  I highly recommend that you join the community and post your question there.

  This time, do not forget and give identifying information more accurate than you did in this post. In the image below, you will see how what gave you as a product identifier can be confusing.

  

• Card mother H-IG41uATX HP works @ 1066 Mhz with single 2GB 1333 Mhz RAM

  Hello

  My card mother H-IG41uATX HP works @ 1066 Mhz with single 2GB 1333 Mhz RAM (Apacer PC-10600) @ 7-7-7-20.

  BIOS is Version 6.08, 07/07/2011.

  BIOS it detected as PC-8500. CPUZ shows like PC-10700 work clocked at 533 Mhz (= 1066 MHz DDR).

  The processor is Intel Pentium Core 2 Duo E 8400 3.06 GHz with FSB 1333 MHz.

  WIndows 7 operating system

  1. Why does is not able 1333 Mhz motherboard @ full speed?

  2 working memory @ 1066 MHz @ 7-7-7-20 VS memory work @ 1333 MHz @ 9-9-9-24, which is better?

  Khelifi

  Sure... While theoretically fastest speed of memory should be faster, there is little or no difference in the overall performance of the memory. The memory CASE latency generally increases the rated speed increases. Latency means basically 'backwardness' and this latency to counterbalance the gain by increasing the speed. Still, you would never notice a difference between the two.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• The card mother MS-7184 (AmethystM) in my old HP PC takes in AHCI mode?

  First of all, thank you for taking the time to read my post!

  I recently bought an OCZ Aligity 4 256 GB SSD drive. I want to use the SSD as drive replacing the original hard drive in my old HP Pavilion Media Center TV m7334n desktop PC. Here is the link to my pc:

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=1821850

  I know that the motherboard identified on the Web site above for this model of PC is A8AE-(AmberineM), but the motherboard I have is MS-7184 (AmethystM), the specifications of the motherboard is here:

  http://support.HP.com/us-en/document/c00378480

  I updated the BIOS with the latest version (3.47, 03/03/2006) I can found on the HP website. In the BIOS, I can't find any info on the AHCI support. My questions are:

  1 - is the card mother MS-7184 (AmethystM) in my old HP Pavilion Media Center TV m7334n Desktop PC support AHCI mode?

  2. how to configure CMOS when I use the SSD as my main drive on the old HP computer?

  Note Please that I have aleady copy drive hard whole orginal on the new SSD and I started my computer on the new SSD. This works. I have another post questions on the recovery of the system on the SSD, the post is here:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g/system-recovery-doesn-t-work-on-cloned-SS...

  Thank you!

  You are the very welcome.

  I leave these settings at their default values.

  You have the SSD connected to sata port, and it must operate to the maximum 150 Mbps transfer speed, 133 or 100 no matter what readings are displayed, as would an IDE drive.

  The problem is that since there is no AHCI setting, the drive cannot enjoy the native command files or TOPPING.

  Aside from that, an SSD should be better that a standard SATA I mechanical drive or IDE hard drive.

  Even subjectively, you should 'see' a difference in sensitivity of disc, not you?

  Improved time, faster startup time for research, for example.

• Problem of card mother-suggestions

  I have a Desktop Pavilion p6310y and I lost my second mother. He has a Paragon M2N78 - motherboard and said that it is the only one that can be used on this computer. Does anyone know if there is another motherboard that can be used on this computer? It has a processor AMD 2.8 ghz and 6 GB of ram. I really want to buy a new computer, I just want to see if it can be resolved.

  For any help or suggestion would be appreciated.

  Bob

  Bob,

  Here are the specifications of your desktop HP Pavilion p6310y and its card mother M2N78-(Violet6). Please note that this model uses the 'VIOLET6' of the M2N78 - motherboard version and not several different version called M2N78 - LA. This model came from the factory with an AMD AM3 Athlon II X 4 630 and 6 GB memory DDR3.

  While you can replace the motherboard with a new one, Windows will become "not authentic" and you will need to purchase a new copy of Windows. Other problems that may arise,... include your recovery discs HP will no longer works, back plate I/O may not match, mounting motherboard can not align the studs, etc.. When installing a new copy of Windows, you will lose all 'value-added' original HP supplied with your computer software.

  If you're OK with every possible question of a motherboard out of factory usage, consider these cards mothers AMD AM3 + who is responsible for your AM3 Athlon II X 4 630 CPU and DDR3 memory.

  Please send Bravo

• Dell desktop computer just ran scan & system - failure of the card mother how fix this?

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  First of all - the 'motherboard' does not mean 'hard drive '.  This means that the "mother".  :-)  The drive is the storage processors is the brain and everything connects through... the "mother".

    
  Second - why sweep you all the months?  Unless you are having a problem - well - I suggest you not to do so.  Heck - you may see a false positive.  Do you have any indication that you have a hardware failure?
    
  Here's what I suggest:
  (1) stop the execution of this "free scan of Dell.
  (2) ensure that the drivers of motherboard, video card, network device and peripheral chipset audio are later you can get - on the Dell site for your specific Service and operating system combination label (drivers and downloads section, use your service number and put in the operating system you are using.)
  (3) never use Geek Squad.
  (4) what is the "MSN Help Menu?
  (5) choose AN antivirus software - two is misguided and may cause problems.
  (6) run some scans of malware with the details, I will give you right after that...
    

  Regarding AntiVirus - free are very good: Avira, AVG, Avast, UnThreat

  You could spend ~ 60USD during two years of eSET NOD32 AntiVirus (not more - just product AntiVirus) and which would be more worthwhile.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Remove everything it finds.

  Reset.

  The less you have to run all the time, most things you want to run will perform:
  

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  For the printer - you have downloaded and installed the form here?
  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=128284&infoType=downloads&platform=OSF_W_7-64

• Dell Studio XPS 435mt does not - light light orange card mother

  I had my Studio XPS 435mt for recent years and love it! Normally I leave my machine on almost every day all day so I can access it remotely. Well, today my power went out (the product is connected to a good surge protector) and now it won't turn back on.

  When I plug it in there is a green light to the rear of the machine and internally, there is a orange light, which lights up. When I press the power button nothing happens, not even try to power on. I read a few forums that suggest all of a new power supply, a new motherboard and even a job to 'put your motherboard in the oven' random.

  So my question is can I do anything to check what the problem is? Also, if it of a motherboard problem and needs to be replaced, where is the best place to get a motherboard? Reference Dell sells to them directly or I have to go to a 3rd party to track down?

  Thank you in advance for your help!

  A type of power surge Strip does nothing to protect the PC during a power failure.  You need a 'UPS' unit to protect the PC during short power outages (most).

  As he ran, anything could have happened to the power supply to the motherboard to a component on the motherboard.

  As you have the power to 'keep' alive on the card mother, indicated by orange LED, power supply works somewhat.  Unplug the power connector 24 pins on the motherboard.  Then the rider GREEN wire to a BLACK wire and see if the power turns on (fan running).  If it does, it does not say the PSU is good (only replace it with a known good power is the only true test for a power supply), but it does not say the rotation of the problem is not in the power.  If it does not start, food is the likely problem.

  If the power supply lights the other most likely problem is the motherboard.  Reinstall (unplug and plug back in) the prior panel connector on the motherboard and then give it a try. If it still does not respond, the motherboard is suspect.  The power switch, itself, would be a very remote problem.

  Dell is a source for a replacement motherboard.  There are sites that sell Dell used/given to nine motherboards and ends up with a google search.  Only another mother of exact replacement fit and work.

  Finally, regardless of the tests do or anything that seems as it isolates a certain part, unfortunately only to replace the part really tell you if it's bad.  To avoid buying something you don't need you can make to a PC repair center renamed to what is really wrong.