Question charger...

Similar Questions

• Satellite Pro A40: question charger

  I hope that someone may know the answer to that. I have an A40 and over the weekend the charger packed in. Its a powerpack 15v 5amp. I have a spare part for my old Satellite, what do I know works, but not being able to the A40.

  The rating on this pack is 15v 3amp. Does make a difference, and therefore the A40 will not power up/load, or did more damage I have originally thought.

  I hope it's just the side ampage causing the problem, so I just buy a replacement for powerpack, rather than a new unit!

  Thank you very much

  Post edited by: Chozbert

  Hi Chozbert

  You are right. You buy a new power adapter. The part number, you can find on the label.

• Question charger Y410p

  I bought my Lenovo Ideapad y410p about four months ago in the United States. I use it often and one day when I plugged my charger after the battery was dying, the charger has started making strange noises of beeps. I thought that it was a problem with the plug point but it happened with other points of the plug as well. I have not dropped the charger or done something that could damage it. When I used it today, the laptop displays a flashing red light, where the light load is supposed to come. Not only the battery icon shows that it is 3% plugged and charge. I left for 2 hours and is not doing anything. Can someone please tell me what to do? Thanks in advance

  If there is a similar machine near to try another charger in your machine and yours in another to determine if it's the phone or charger, the charger I know made a buzz when there is a problem with the machine itself ensure that your key usb and other ports are clean.

• Question charger Dell 1720

  I recently acquired an old laptop Dell 1720 which did not come with a charger. I got one for a HP that has the same characteristics as the Dell (19v @ 20W) and plugs into the Dell ok. It works the laptop very well and it shows "loading" but the battery shows only 2 lights (part load) and is stuck there. Any thoughts?

  

  Your best bet is to buy a genuine Dell AC adapter, but you can check the status of the AC adapter and the battery in the BIOS.

  1. turn the computer off and then make sure the AC adapter is connected to the computer

  2. power on the computer, very fast start typing the F2 key at all times, you should be in the BIOS screen.

  Under the main screen, find the type of AC adapter. If the adapter said None or unknown, then it is a problem with the adapter. Suggest you only replace AC adapter / CC.

  In the advanced screen, look for the battery, I must say "This battery is performing normally. If there is no other message, this could mean that the battery is defective and must be replaced.

• Questions Charger HP Pavilion DV4-2165DX

  Greetings!

  I recently acquired this computer which has been used very little and well maintained for life.  I have problems with the charging system.  I tried to replace the battery (twice) with official HP for this laptop batteries.  If I insert the battery, the machine will start very well.  If I remove the paste and use one of the two power cords I have for this computer (the two HP OEM bricks/cables) it works perfectly.  However, if both are in the machine at the same time, it will use one or the other.  I downloaded executable diagnosis of HP battery, and it is said that the AC adapter is not turn on/off.  However, if I remove the battery, the laptop powers on with the AC adapter just fine.  This machine is running Windows 7 Ultimate, X 64-bit edition.  It has all updates and is not malicious software that I have just rebuilt the machine with copy of my Windows 7 manufacturer.  Can someone please help me, for the sake of my sanity

  Thank you

  Mike

  IT technician

  P.S. .......... I tried searching everywhere for someone who has the same problem, and I have not found anything close.

  Its a motherboard hardware issue unfortunately.

• Spectrum HP X 2 13: duration of initial charge of HP spectrum 13 X 2

  Hello

  you just bought a new spectrum of HP 13 X 2 which should arrive in 4 days and I wanted to know if there is a load time initial or do not see that I'm mixed messages looking for an answer online.

  Hello @Oshry,

  I read your post about how you're wanting to know if there is an initial charge time for your laptop, and I'd be happy to help you in this case!

  According to DavidPK, an Expert from HP on the forums:

  "The first time you charge the battery, I would leave the AC adapter plugged in for at least 3 hours after that it shows to be charged fully (100%).  After that, just to recharge the battery in the normal way.  Lithium-ion batteries are better maintained by charge when their charge level drops to about 40% of their total capacity. »

  Reference: http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/charging-laptop-Battery-for-the-first-time-after-more-the-6/m-p/605227/highlight/true#M22810

  I hope this helps!

  Best regards

• Satellite click Mini L9W - B: loading new problem?

  Hi all

  I have some serious looking problems with my mini load click again (6 weeks) satellite.
  It seems to be a new addition to an already long list, but I had a glance at previous posts and has not found the same problem.

  The battery ran out a week ago and I've only connected last night to load all night (I was on vacation). This morning I tried to start and he won start t at all. The only thing it shows every 10 to 20 seconds (without touching the device) is the loading screen. I believe in the screen both batteries are empty, but the Tablet battery charge (now for 5 hours without a change in status). He still won t start when you press the power button.

  Someone had a similar problem? If my battery is just very deeply and patience will solve the problem? Other recommendations?

  The BIOS is upgraded to 1.7 since I had other questions charge described at the beginning and it seems to have fixed those at least.

  To be honest, I'm a bit fed up with it. I love really all the benefits of the device (size, detachment of the Tablet, connection USB etc.), but the list of problems is really a bit long

  I hope someone can help me. Thanks in advance.

  SAS

  I hope you solved this. I had the same thing. The problem seems to be that the unit is on and there is no enough power via mini usb to run and charge the batteries at the same time.

  The solution was to press the power button for 15 seconds to ensure a forced switch off then let it charge and check after a few hours of a short touch on the power button, is not enough to start. I hope you can see some charge in the battery of the screen.

• IPhone charging 7 question

  Good if for some reason any, my iphone to stop loading, I used different cables and adapters, but the problem persists.

  To load it again I have to move my phone a little and it will start loading again.

  Hello samharl123,

  Please ask questions about your iPhone, recharge here in Apple Support communities. I don't know what I'd do without my iPhone. When I was traveling, I even had to buy a USB multi for my devices charging station, so I understand the importance of the power and portability! The description of your problem, it seems that the lightning cable is not correctly seated.

  Please test this with several cables and let me know the issue seems to occur with different cables as well. If the official Apple cable provided with the iPhone 7 is loose, or does not stay in the right place when you plug it in, and loading stops when (for example), you set it on the bedside table and have to jiggle it or adjust just to make sure, it remains to load or start charging again for you, then the port of loading on the iPhone should be checked by a technician of certified material. You can find a service provider using this link: Apple find locations. There may be other options available, depending on where you are, when you bought your iPhone 7 and the status of your warranty. If you want to ask what options are available to you, please contact an AppleCare Advisor using this link: Contact the Apple Support. I know they will help you professionally and promptly.

  Thanks again for visiting communities Support from Apple. Have a great rest of your day.

• Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  Question, how can I use my pc to see what has been done

  Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  How can question, I use my pc to see what has been downloaded on the cloud?

  Your question has nothing to do with iCloud. You should remove unnecessary data from your phone to free up about 10% of your phone's storage space.

• Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

  Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

  Occasionally, it may restart because something was wrong. It is not a problem unless this happens frequently.

• Question about laptop charger

  Dear customers of toshiba, and Toshiba

  I bought a Toshiba Satellite S2400 in the past. My father is currently using a Toshiba Qosmio laptop F10. My laptop charger is defective and is currently not available to use. My question is: is it possible to use the charger laptop Qosmio F10-101 of my father for my laptop Toshiba S2400 to charge my battery until I get a new laptop computer charger?

  Thank you

  Hello

  Theoretically, it should be possible to use it, but I put t know if the polarity is the same one side if two laptops have the same domain controller into the slot. It will be perhaps better to wait for a new. ;)

• iMac G3 tray charger stuck on the gray screen with question mark flashing folder

  I recently bought an iMac G3 (charger tray, 333 MHz, M4984) and when I try to boot from an OS installation disc 10.3, there will remain only blocked on the gray screen with folder flashing with the question mark. Not only it does not maintain the keys C or Option, but it will not start up any combination of keys, such as resetting the PRAM or the NVRAM. It just starts and stays on the screen with the flashing folder does nothing. It CAN read the keyboard, because I can turn on the computer with the keyboard, it just won't start to the top of any disk or any combination of keys. Any ideas on what could be the problem? I just replaced the hard drive, but it was the same before I replaced the hard drive as well. In addition, the iMac had apparently OS 8.6 installed on it when it came, and I think I need to move to OS 9 and do a firmware update before you install OS X (correct me if I'm wrong), but I can not do because the iMac does start not in general of any combination of keys. Thanks in advance, any help is appreciated.

  I recently bought an iMac G3 (charger tray, 333 MHz, M4984) and when I try to boot from an OS installation disc 10.3, there will remain only blocked on the gray screen with folder flashing with the question mark.

  Valid operation system not found.

  Not only it primer not leave now pressed the C or

  Place the cd in the drive.  power off.  Hold c power key on & while in the startup is underway.
  

  Keys options,

  key option is not supported on tray loading imac g3 333

  In addition, the iMac had apparently OS 8.6 installed on it when it came, and I think I need to move to OS 9 and do a firmware update before you install OS X (correct me if I'm wrong), but I can not do because the iMac does start not in general of any combination of keys. Thanks in advance, any help is appreciated.

  It took charger slot, but I think that optional for the bin.  I think that you can upgrade the firmware with 8.6 for trays.

  You may need to reset the PRAM and NVRAM and Mac's Open Firmware. Stop the Mac, then it turns on and before the screen lights up, quickly down the command, Option, P, and R keys, until the Mac rang twice more after the power to chime.

  Then, before that lights up the screen, hold down the command-Option-O-F until the Open Firmware appears. Then enter these lines, and then press return after each of them:

  Reset-nvram

  Configure default

  Reset-all

  "The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings. »

  http://support.Apple.com/kb/TS1812?viewlocale=en_US

  In the case of the...

  Try taking the battery for 10 minutes.  Put back in the battery.  Fingers crossed. Turn the machine back on.

  How do I eject the cd from the internal drive:

  eject the cd

  List of devices:

  devalias

  List of variables:

  printenv

• Satellite L650 - 10 d - Question on battery charge time

  Hello!

  Yesterday, I bought a Toshiba Satellite L650 - 10 d, and so I would like to know for how many hours the battery needs to load the first time.

  Just one more question: do you think the advice I found [here | http://www.lovebattery.net/product_detail.asp?ID=5856]? In your opinion can I follow this advice without problems? Are they right?

  Looking forward to your reply,

  Thank you very much!

  Hey Buddy,

  Everything you need to know about battery you can find in your user manual. You will find some tips on extending the battery life and how to maximize the battery life. Everything is described very clearly in my opinion.

  In General, the battery is fully charged if the battery indicator displays the color to white.

• Question of battery charger

  I just bought a HS SX50 and a camera case. I found that the case of the camera has enough room in his pockets to store the battery charger provided Cannon (CB - 2LC) or an extra battery, but not both at the same time unless I install the battery in the charger. So my question is; leave the battery in the charger, all the evils of the time or unloader battery?

  Hi Reddog99,

  While we don't suggest long-term storage in the battery charger, you shouldn't have problems storing the battery it for a short period of time.

• Sansa Clip + Question of burden (with mini USB cell phone charger)

  I have a few questions about the issue of workload:

  • is it acceptable to fresh clip + use the charger of mobile phone with mini USB socket (5v ~ 700mA), as I know, USB 2.0 specification is 5v ~ 500mA?
  • Sansa is equipped with a circuit to handle the charging process, for example the the blackout when the battery is fully charged?
  • After that several hours connected to the computer, the turn display self... is this normal? (so I have to press a button to see the screen saver and check the State of charge)

  Thanks for the answer of my question... hehhe

  You can use any charger, but be sure that it is 5V and not higher than (above will FRY your Clip).  Around 350 my and especially (even if some 500 my and above is best) is very well - the Clip will use the amperage he needs.

  Yep, you can disable the data pins and everything should be ok.  Just be sure you know what you're doing on the pins.  Many people say to be able to arrive at the same end simply by inserting the USB cable into the computer, not completely or by covering the data pins.  In addition, you can buy USB charge cables only - I have a couple of people.

  Note that when you connect to your computer, you can still read the Clip files, via the computer itself (not the music) and media playing software that is pointed and play the songs on the Clip.