Question Lightroom/Setup operation

Similar Questions

• How can I download lightroom 5 operating instructions

  How can I download lightroom 5 operating instructions

  Go to https://helpx.adobe.com/lightroom.html, the help online and on the right side under "Help and tutorials", there is a link "Lightroom 5 manual (PDF 4 MB)"

• Question on Setup on Dell M6600

  Hello!

  IM buying the M6600 Dell and som questions about Setup...

  1 STORAGE

  IM thinking of getting a 128 GB SSD for the OS and programs...

  So im thinking of getting 2 x 750 GB sATA drives (7200). .is is better put those in RAID 0?

  2 CPU

  Intel Core I7-2820QM vs Intel Core I7 2920XM... it is better the extra $ 1000 for the 2920?

  3 RAM

  16GB 1333 MHz DDR3 vs 16 GB 1600 MHz DDR3... what to choose?

  I will be editing video clips AVCHD 1080 p 50 p (panasonic SD600)... this machine will be excessive for work? My only request is to edit the images natively without shutter in full HD resolution...

  Thanks in advance!

  Best regards

  Martin

  Sweden

  Overclocking is no way, the system will be slower than an overclocked system, but there is nothing to do about it. But it does not affect the GPU acceleration. The reason of not not two drives raid0 is:

  1. it doubles the risk of losing all the data.

  2. it is not faster than two separate disks, if it is properly implemented.

  See: Adobe Forums: generic guideline for disk configuration

  For information on the impact of overclocking, laptops against destops, MPE material, see etc.: results of benchmarks

• Question about the operating system reinstall on Portege R500

  I bought the version of 64SSD R500, and for some reason any that it struck me to check if there was a DVD player to this topic.

  It was rather annoying.

  I know it's easy to buy an external drve to copy software etc on the Portege, so this isn't so bad.

  However, I'm considering a re - install, possibly to XP, but maybe just to reduce the amount of repulsive of bloatware I had on my computer when I turned on.

  Now to the crux of the matter: if I use an external USB drive, I need USB drivers. If I delete the operating system, which will remove the drivers.

  Finally, my question is: how in the name of hell is someone supposed to put a new installation in a R500?

  Thank you for your patience.

  I understand everything up to the point with the bloatware.

  But what I Don t understand is: what do you want with a USB hard drive? I hope that you don t average a USB - HDD (it s a bit confusing). ;)

  Usually, you can use all the drives without the need of some drivers because the machine offers you the ability to boot from a USB device after switching on of the machine and see the Toshiba logo...
  You need only press F12 and select the option to boot from an external USB CD/DVD drive. That's all.

  Welcome them

• Lightroom Setup error?

  I am installing lightroom, but it keeps failing and gives me the following error:

  ERROR: DF014: unable to create the symbolic link to '\\fs01\folderredirect$\e009278\Documents\... \Desktop\Adobe Lightroom.lnk "(Seq 6641).". "

  I tried several facilities...

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

• Question Lightroom Mobile Sync

  Hi all

  I think that ultimately, I need help from technical support Adobe, but that throw out there for others who have similar questions.  I've had two different subscriptions with Adobe (don't ask why): (1) monthly subscription to the photographer who included Photoshop Lightroom and Photoshop CC, and (2) a single subscription to InDesign.  I obviously should have bought the full suite of CC knowing what I know now.  I noticed the Black Friday sale before Adobe offered and contacted support by chat for 1) cancel subscriptions for both above and 2) replace them by a subscription to subsequently complete CC I thought allowed access to all Adobe applications.

  When I run Lightroom in my identity plate area, I try to use Lightroom Mobile sync (worked until I canceled my photographer package) and am currently get a message that my laptop Lightroom has expired and cannot perform the synchronization between the Office of Lightroom and Lightroom on iOS.  When I connect to my account on the Adobe Web site to watch to see what subscriptions I active, I show two lists: (1) my newly acquired Creative Suite of cloud and the package of 2) my expired photographer listed have expired.

  Yet once again, I expect that the full suite of Cloud Creative should have allowed me to synchronize Mobile with Lightroom.  Instructions for Lightroom syncing seems to indicate that this is the case (screenshot below).  All advice appreciated words.

  Thank you!

  

  Hello

  The problem has been solved since the back-end, could you please sign out of Lightroom and then sigh, LR mobile should work now.

  Concerning

  Rohit

• question Lightroom 5 installation

  I bought Lightroom 5.2 and have the original installation file. I had to have my computer reloaded from scratch to get rid of Windows 10. I also downloaded the updates, the last of them was 'Lightroom_5_LS11_win_5_7' I guess I have to install the Original installation file first, and then run (or check for updates) before you run the update file.  Is there a better way?

  No need to run version 5.2.

  Simply run the installation file "Lightroom_5_LS11_win_5_7".

  Is the update installation file, not just an update, you can check the size of the file, its similar 957 MB, this is the version key update setup.exe file

  You can check below link, same thing:

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-downloads.html

• ESXi Hypervisor - start of the guest on the question of booting operating system

  Hi all

  I am very new to the game of VMware and I intend to start playing with free products available and to acquire a good understanding of it.

  My question that I have currenty obtained is:

  I have my desktop PC, I intend to install 5.1 ESXi hypervisor on it and then install a version of windows as a guest operating system.

  I hope that I can set up so that when I turn on the computer, windows automatically boots - so if my wife wants to use the computer, it can still, and his experience is no different. However, I can then install several other OS and turn them as and when I need and have a good game.

  Reading through the documentation that it doesn't look like this is possible?

  I know that this is not strictly the destination of the product, but it would be convenient for me.

  Has anyone encountered this before? / You know a way to do this?

  Thank you very much

  Tom Whittle

  Welcome to the community - it is possible to have a virtual machine to run at startup of the ESXi Hypervisor but where your solution falls short is you are not able to access the virtual machines in the ESXi host console - you still need another machine to run the vSphere client so you can manage the ESXi host and access the virtual machine.

• Install versus execution question - Lightroom CC

  Hello world

  I just wanted to mention really there are 2 questions that we see currently.

  Question n ° 1

  You cannot install Lightroom CC because it is not available in the creative cloud app

  Solution: Login and in order to update the list of available applications

  (it was also noted that she only is available as a trial for the subscribers - no solution AFAIK still there)

  2nd edition

  You cannot run Lightroom CC after installing it. It will start just not.

  On Windows if you click right on C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe and chose "Run as Administrator" will open for higher priviliges. Once again, nothing happens.

  Solution: none yet

  Hope that helps to clarify the issues in two

  in fact, record and return is necessary! restart and reinstall help not, but recording and back indeed:

  Here, the official answer for Macs, but it works for Windows as well. CC applications close immediately after the launch

• Question Lightroom 5.4 full screen

  Hello

  When I go to modepleinecran with the F key, I can't switch to the normal display mode. I tried F, alt + cmd + F and escape. Only if I stop Lightroom completely with CMD + Q and start it again I can use Lightroom in normal mode.

  I deleted the plist files in the profile of users without success. I do not use two monitors or similar.

  SystemInfo (German):

  Von Lightroom version: 5.4 [955652]

  Operating system: Mac OS 10

  Version: 10.9 [2]

  Anwendungsarchitektur: x 64

  Anzahl logischer Prozessoren: 8

  Prozessorgeschwindigkeit: 2.6 GHz

  Integrierter Speicher: 8192,0 MB

  Für Lightroom Rechtssicherheit phys. Speicher: 8192,0 MB

  Lightroom von verwendeter phys. Speicher: 906,1 MB (11.0%)

  Lightroom von verwendeter virtueller Speicher: 2118,5 MB

  Cache Speichergrosse: 749,4 MB

  Kind regards

  Stephan

  I had the same problem and I was able to resolve the issue of...

  1. quit LR

  2. restart LR and directly press Shift-F

  3. close LR

  4 restart LR and F key working again normally.

  I do not consider this a final resolution. I expect Adobe to fix this very annoying bug.

• Facing the question with the operation of CreateWithParams

  Hello
  
  I use Jdeveloper 11 g (11.1.2.1.0). My requirement is duplicated a few column values of the above line.
  
  I created ADF Table and used the CreateWithParams of the operation. It works. But the question is, always, is to copy the values from the first row of the table and it is to insert the new record at the beginning of the Table of the ADF.
  
  I want to duplicate the value of the current record position and insert the folder just below.
  
  I spoke * [ADF Code corner 013. How to declaratively create new rows in the table based on the existing line content | http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/13-create-with-params-169140.PDF] * steps. All of the suggestions.
  
  
  Concerning
  Surendra

  Hello

  + 1. As soon as the new record is created, the validation is going to get fired. He started the error message saying DeparmentID value is required. How to stop this. +

  If the attribute is required, then it must be provided. You cannot create a folder without providing the required attributes. He would miss at least when persistent change in the database

  + 2. The new line is be created above the currently selected line. How do I create the line below the currently selected line. +

  To insert the line at a specific position have a peek here, which adds the row to the end

  http://adfbugs.blogspot.de/2010/04/inserting-new-rows-as-last-row-of-table.html

  In your case - you use CreateWithParams, you need get the current line, then create your new line, remove the new line (as it is inserted in the wrong place) and then add back a rank after the current. Indeed, it is easier to achieve if you manually created the line. However, its possible

  Frank

• Question Lightroom 4.1 tips and installation

  Hello

  I better 3.6 LR LR 4.1 on my laptop Windows 7 with 8 gigs ram. I need to free up space on my internal hard drive, so I'm moving my images on an external hard drive 1 t, connected via usb 2.0, unfortunately.

  • question 1: is - it matter in which order I do the above? In other words, should I do the upgrade to 4.1 first and then move my images/catalog to the external hard drive or do I move my pictures and then upgrade?

  I've heard of how LR 4.1 is slower than LR 3.6, so I am, a little worried about performance.

  • question 2: someone at - it specific advice on the LR configuration for best performance in light of my files is stored on the external hard drive via USB 2?

  (I use this computer for web surfing and image programs.) Not to mention LR, I have also run Camera Raw, PS CS 5 and Premiere Elements. I thought I'd do two images of catalogs-again I suggest to hd and film ext clips that I want to keep on the internal hard drive. Who is? )

  Thanks in advance,

  D

  ziggycat4 wrote:

  Hello

  I better 3.6 LR LR 4.1 on my laptop Windows 7 with 8 gigs ram. I need to free up space on my internal hard drive, so I'm moving my images on an external hard drive 1 t, connected via usb 2.0, unfortunately.

  • question 1: is - it matter in which order I do the above? In other words, should I do the upgrade to 4.1 first and then move my images/catalog to the external hard drive or do I move my pictures and then upgrade?

  Doesn't matter, as long as you do it right

  I've heard of how LR 4.1 is slower than LR 3.6, so I am, a little worried about performance.

  • question 2: someone at - it specific advice on the LR configuration for best performance in light of my files is stored on the external hard drive via USB 2?

  It is slower for some people and not slower for others. I don't think that anyone in these forums has understood what the reason is for slow on some computers. The only thing you can do is try it on your computer. Moreover, as I have read, in Lightroom performance problems are unrelated to USB 2.

  (I use this computer for web surfing and image programs.) Not to mention LR, I have also run Camera Raw, PS CS 5 and Premiere Elements. I thought I'd do two images of catalogs-again I suggest to hd and film ext clips that I want to keep on the internal hard drive. Who is? )

  Nope, several catalogues never made sense to me. You simply reduce your effectiveness by having several catalogues here. A catalog is easier, this way you won't have to switch back, you never wind up importing in the wrong catalog, you can search through all your photos and videos, etc. A catalog is the way to go.

  Also, did I mention that a catalog is the right way to go? Because if I didn't mention it, let me say that a catalog is the way to go.

• question about the operation of the ASM

  Hello
  
  I use as storage oracle 11 GR 1 option matter and ASM. the sys user is Administrator of the ASM, but I am not able to access ASM instance with the sys user. If I didn't know oracle, then I have access instance asm, asm dg operation etc, I thought that ASM admin is one who can perform an operation on the instance asm and asm dg etc that I should always user use 'oracle' for the operation of the DSO. cant I use user "sys" to it. Please share your opinion on this.
  
  
  Thanks for your help,

  user11305560 wrote:
  I export ORACLE_SID variable. But if su do oracle then only i can do surgery ASM.

  Yes, and that's because the user of the OS who need all permissions to administer the instance ASM 'oracle '.

  If I didn't know sys, then it does not allow me to do. sys is a Director of the DSO, so I thought that it should also be able to perform the operation ASM.

  Yes, it's because "sys" is (in your case is obviously) user OS that do not need all permissions to administer the ASM instance.
  Then, when you're OS user oracle, unlike when you're OS user sys, you are able to connect to the DSO with the SYS user database

  My question is, can only the user oracle ASM operations do.

  Each user of the operating system with appropriate permissions can do

  Thank you.

  [Privileges ASM instance | http://download-uk.oracle.com/docs/cd/B28359_01/server.111/b31107/asminst.htm#CHDEDIID]

• Qosmio F50-108 - question of front operation panel

  Hello, I have a qosmio F50-108 and the front panel does not work me, I think I uninstall a program. Please link to the driver. Thanks Astier

  Sorry for my bad English

  Hi Astier

  Sorry, but I don't understand what you are meaning exactly façade?
  Do you mean like the Toshiba control buttons (play, pause, stop, etc.)

  If you are which means these buttons and if you deleted a driver that controls these buttons then a solution should be easy.

  First of al, you should try to define the operating system at the beginning of time until you have deleted this driver. To do this you must use the system restore utility.

  Second, if the procedure described above does not work, try reinstalling the VAP (value added package).

• Question about reinstalling operating system via external USB CD/DVD

  Hi all. I need to reinstall the operating system on my portege m200, but I have a lot of problems:

  (1) the recovery DVD seems to not work on my external USB dvd drive
  (2) at the start, it is impossible run any OS on cd USB external dvd drive, so I can't use another XP or Linux OS at startup

  Someone told me that I need a particular type of dvd-pc card reader. Is it true? dvd to pc-card readers are good or I need gadget particular toshiba?

  Thanks for the help and sorry for my English
  idum

  Hello

  As far as I know that you need a compatible USB key to boot from the external drive.
  I found this useful document with a list of compatible readers on the Toshiba support page.
  Please visit this link:

  http://support.toshiba-tro.de/KB/40/TSB4800R70001R01.htm

  Best regards