Question of edge 15 AC adapter

Similar Questions

• Question of ThinkPad T450s Power adapt

  Hi guys, this is my first post

  I want to buy the Thinkpad T450s soon (US version) for my personal use. My only concern about this is that the power adapter can operate with the South American power (220V, 60 Hz), because the United States 110V operation as far as I know.

  Only the product specification is as follows: country Pack 45W AC adapter / CC of the United States (2 pins).

  PS: I sent this question a week ago to Lenovo support and they did not respond, so I take this way.

  Thanks in advance.

  Power adapter 110-240V, then it should work, I use mine in Europe, you just use the adapter and the end to match your outlet in the country.

• Question about the universal power adapter car for Satellite U500

  There are different types of adapter car 12 volt on the market with different powers - that's good, but some "automatically select the output voltage.
  These units have a reputation of reliability or security for the laptop or are they to be avoided?

  Hello

  The problem is that in most cases these s universal adapter takes care of different intensity values
  You can change only the value of the Volt, but not the ampere ampere would change automatically and depends on the selected Volt.

  I would not recommend these universal adapters because the laptop needs some value ampere
  I recommend buying an adapter that is designed for this laptop to avoid some hardware problems

  Get in touch with the local ASP to get such part

• Question about Satellite A30-power adapter

  Hello

  I own a laptop Satellite A30 and my charger just died. I have looked on the internet to buy a new one, but can not find the same model of the same brand (delta ADP-90FB REV electronics. (E) and having trouble finding something on the site Web of Toshiba.
  I found some Chargers compatible with laptops Satellite A30 on another site, but they are quite expensive (about £55). Another less expensive option?

  Thank you

  Thomas

  Hello

  Believe me: it s better to use than stuff unnamed original equipment. On the one hand, you win money and if your machine is broken due to a power adapter that gives your machine
  a wrong voltage or whatever.

  I had a great experience with my tecra 8100 a few years ago:

  My old AC was broken, so I bought one in a store, which has been declared as "corresponds to 100% and blablabla".

  Cost: $ 37

  After a while my machine freezes sometimes and for a day-> no boot.
  Then I gave my machine to fix after they have made their diagnosis, they asked, what sort of AC, I used. Heh? They explained to me, I used the AC adapter was not a constant voltage,
  If some capacitors smd-says 'goodbye '.

  You can save money, but give you him another side, believe me.

  Welcome them

• Question about the Equium series adapter in another country

  I have a series of satellite and in the summer, will move to the United States. I want to take my laptop with me - me will get a new transformer unit or can I use a plug adapter? If I need a new transformer where can I get one and how much it will cost.

  Hi Matt,

  Most (all?) Computers laptop Toshiba are now supplied with a universal power adapter that can detect the supply voltage and adjust accordingly. Check it Panel side on your card and if she says voltage 100-240 v, then you will be quite OK to use it in the USA with a suitable adapter.

  Also, best wishes to you moves to States.

  Kind regards

• Question about the USB wireless adapter for Windows XP

  I'm trying to set up a wireless connection for my desktop pc with Windows XP. I don't see any options for a wireless connection. A USB adapter would do the trick? Looks like the easiest option.

  For a desktop computer with Windows XP, there was probably no built-in wireless card. Some systems Windows XP later had these as optional.

  You must meet your Dell model.

  A USB dongle should work, but make sure there is a Windows XP driver on the suppliers Web site before you buy. Windows XP has reached its end of life and is no longer supported by Dell or, more importantly, Microsoft. Be careful with the continued use of Windows XP, especially if the connection to the internet.

  You can install the unofficial service pack 4 before you connect to the internet which will help a little:

  

• iBooks Widget Audio question (leading edge)

  Hello, my name is Dominic Redding. I worked on a HTML5 widget for an iBook (stable via iBooks author). I had a problem that I can't find a solution for (I checked through these forums, the Apple forums and some other forums, and each "fix" missed me). I implement my audio through the implementation of audio native from the edge (using the latest version), and then assign the room a div visibly out of the scene. My problem is:

  I have audio in my project that triggers whenever a button is tapped. Preview of the browser Ctrl + return, everything is A-OK. When I put the .wdgt in iBooks author and post it on an iPad, the audio won't play entirely. When I test the .ibook on Mac iBook, everything works perfectly. When I test the .ibook on an iPad, it fails again. I use .m4a audio files.

  I'm trying to figure out how to get the audio to play on an iPad (or why it will not play on the iPad) and I need help. Thank you for your time.

  My file .ibook for anyone who wants to prod: https://copy.com/AGuFcv60OxZW

  I thought about it. I tested the audio I was jQuerying against animate audio set to play in the dashboard interface. The audio interface of Edge played it perfectly, so I looked through my rating. SYM.$("element") [0] (edge) .play; Restores the sound at its beginning. I put audio to have currentTime = 0 and then play, which is somehow messed up the order of audio playback and prevented his on the iPad.

• Blitzz Super G PCI wireless network adapter works only in Windows XP SP3

  I looked for answers to this, and it seems that all they are pointing to the same question. Grave wireless network adapter failed after the Service Pack 3 update. My question is the same thing, I can't get the updated drivers (I have the original installation software, but they face STOP Installation) at some point, the OS would hurt identify the device that the atheros wireless network adapter and it worked but now nothing. Right now, I would like some clarification.

  1. how to fix this?
  2. why Microsoft has not fixed the problem? If it worked in SP2, why don't you just restore the defective file. I understand the WLANAPI. DLL is the main culprit and yet once wonder why neglect?

  Thank you in advance,
  Mario DiMare

  http://www.PCIDatabase.com/vendor_details.php?id=174

  The watch supplier Atheros (the VEN_168C bit) link which you already knew and the Netgear WPN311 above (the DEV_0013 bit) device. If the database is to be believed, I guess Blitzz were product badging Netgear or at least using the same chip.

  Netgear drivers can help...

  http://support.NETGEAR.com/product/WPN311

  Set a restore point first.

  Tricky

• The sensible scaling of composition edge animating in Dreamweaver checkerboard to fluid

  I've created an animation on board animate and placed in the header of a checkerboard fluid to Dreamweaver. I put it in a div in itself so it can be disabled in the mobile layout. When I test the layout in a browser, the composition of edge animate changes adapted to the size of the window, but the height of the div that it's actually not. The width of the div changes with the width of the window, but the div height remains the same. Because the height of the div does not change, as the animation responds and resizes it leaves a big empty space between the bottom of the animation and the content that follows it in the page.

  The div itself doesn't have a rule for its height that are associated with. It seems to me that the div gets its height from the original size of the html object that is the animation. I tried to remove the rule of height of the object, but then the div at the bottom of the animation clips, and yet once, it is not resize the window.

  Is it possible that I can get the height of the div resize to the size of the animation as it changes?

  This should help you.

  Using compositions dashboard animate reactive in Dreamweaver «Adobe Edge animate Team Blog»

  Nancy O.

• Animate edge watch white frame to head in Muse

  Hello

  I asked this question in edge animate - then maybe it can be resolved at the end of the Muse.

  After suggestions from Joel

  I put scene (0,0,0,0) and inserted also preloads.

  and the preload comes after the white box.

  http://www.productionangels.com/AOM/

  I guess it's probably a bug.

  Any thoughts on how to get rid of the flash white box at the head of the animation would be most appreciated.

  I wish I could have this work in Muse, rather than go to Dreamweaver.

  (my thoughts, there is probably a code element that muse adds in the head of the animation)

  Any thoughts would be most appreciated.

  Ciao

  Cathy

  Hello

  Question was going on because of the white color of the scene.

  There could be a lot of workarounds to solve this problem, I tried more to come more than.

  I added a color with the following details step transition.

  Start time: 00:00.000

  Closing time: 00:00.075

  Initials backgroung color: Backgrong color of browser of Muse

  Closing backgroung color: white

  Check the file attached, and then publish the CAO.  I've useed #ff2b18 background color of muse and even for the original color of the Stadium on the edge.

  http://Adobe.LY/14XtKon

  You can change it according to your requirement. Please see the file to muse that I have attached to the folder as well.

  Concerning

  Vivek

• Java adapter in the process task

  Hello
  
  I use DBAT connector to configure data of IOM on the target system. I have an obligation to change password in the target system when it is changed to IOM (default is changed, but this change must be done in a specific way). I packed a java code that changes in some way and put password implemented as an adapter in IOM (simple adapter; a single entry (user password) and an output).
  I guess I should create a task in the form of process that calls this card, but after a few tries, I'm still not able to make it work very well.
  
  My question is: how to implement adapter in the process task? There are 2 tasks by default, which corresponds to the user password:
  -Change user password
  -Edit USR_PASSWORD
  Should I change them?
  
  
  Thanks in advance!

  No thing wrong with the process, you explain your statement of the problem correctly,

  Now do something, go to your task change password and in return variable mapping, don't map to code response, map it to process the data ==> password

  Thank you
  Suren

• FMS3.5.2 supports the entire URL redirection?

  Hello

  I have a question.thanks for helping me.

  1. I entered a url in a video player: rtmp://10.0.0.1/vod/mp4:sample1_1500kbps.f4v

  2. this video does not exist in 10.0.0.1 server. It is available in 10.0.0.2.

  3. the server 10.0.0.1 connect, play and resource not found.

  4 Server 10.0.0.1 knows that this video exists in 10.0.0.2, then redirect the url full to 10.0.0.2. as

  RTMP://10.0.0.2/VOD/MP4:sample1_1500kbps. F4V

  I am looking for the three plug-ins(access, authorization, file), but I can't find a way to solve it. If I want to ask, FMS 3.5.2 support this redirection?

  Thanks again!

  This article feels a bit misleading for me - as if you could go all the way to the FMSCore, check if the file is there and if not then redirect.  This is not true.  You can redirect based on the connection line, knowing that the file from this request will not be there - but it's a little more sophisticated.  If you go this route, you will probably want to URI encode this information into your line of connect to make a choice, but then again you may not be able to make that choice in the edge even when adapter.  You could also build this logic in the player/server in several ways, but anyway it's a bit of work if the content is not available on this particular machine.

  Honestly I would recommend going the ways that make our majority of customers.  Either by checking that when connecting they end up in the right place if the content is limited by the FMS.  Either that or make sure that each FMS can get the range of content according to the needs and balance the load.  Those are the usual approaches.

  ASA

• PC HP Pavilion 15 15-p001tx: control wifi wireless connectivity issues

  Hello
  Member of the Community/Forum
  
  Model name - laptop Hp Pavilion 15 (15-p001TX)
  Questions - Brodcomm 802.11n wireless adapter not Worming.
  
  Problems-
  I was faced with the same problem for 4 days and I tried all possible means to resolve out, but nothing works.
  
  Problems are the following:-

  1) Wifi stopped working 15 minutes to restart the computer and the wifi icon is automatically limited, and then it automatically become the LAN (small PC icon) and after this phone get hanged every time.
  
  to re work I need for wtich forcefully from the power button.
  
  2) I followed all the tips and tricks to solve the problem and even take a Hp support helps solve this problem of wifi. but nothing works... no one has helped me on this problem.
  
  Here are the ways I've tried.
  
  1. that tick managent of power, I have UN ticked (from PROPERTIES)
  
  2. using the CMD, I reset
  
  3. I DID cofig automatic Wlan disable (and put it on startup)
  
  4. update the drivers to the latest Version.
  
  5 install the latest drivers from the HP website brodcomm or even other Web sites.
  
  No the above to help me out.
  
  3) all wired network work great, but when I swtich to wifi, it will automatically limited and then diirectly hang the entire notebook.
  
  Please please suggest the Suggestion and the ways out sorting valueable.
  
  He's really frustrated now, I do not understand what are the ways to my wifi on working condition.
  
  Thank you
  
  Kind regards

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Aditya Rai

  Aditya Rai

  Hello @adityarai82,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post about the WiFi problem and wanted to help you!  I understand that you have tried the troubleshooting steps a lot already, without success.

  Try to review these steps, offered by community member @Great-Christine-Tree:

  First of all, we have a step by step guide to guide you through the process of diagnosis here:
  Troubleshooting your wireless network and Internet access

  A second option is to try the following steps:
  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.
  
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.
  
  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

  Source: fixes Common for wireless connectivity problems.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Satellite Pro L300 - what order of connection is fair?

  Some people recommend to plug the adapter into the wall outlet before connecting the laptop. They believe that the removal of the load (ie. the laptop) to the adapter reduces inrush current. They also believe that this protects the laptop from any power surge caused by the starting currents.

  Why? Because like me, many people have noticed sparks when it connects the adapter to the wall outlet or the receptacle, IE. Sparks jump between the pins of the plug and the wall socket. An explanation that I found is this:

  "Most of these supplies is called"switching"supplies. Basically, they apply the voltage to the output and turn it off very quickly when desired pressure is reached. This type of operation tends to distort the waveform of the incoming line. (Harmonics).
  To minimize this effect, a capacitor is placed in the entrance. If initially energized (connected) a capacitor is basically a short dead. This causes a huge inrush current of current for a VERY short period. So the spark. "

  The Toshiba manual says first connect the adapter to the laptop, then plug the adapter into the wall outlet.

  This procedure is recommended for security reasons, IE. fears that a person will get a shock when you plug the adapter into the laptop? Because that first connect the laptop eliminates any risk of this power connector, and then plug in the wall socket is a common experience that people learn very early to be careful with.

  So is it only for purposes of security, or are there technical reasons for laptop to do first and then taken?

  Is it possible to plug in the wall outlet first and then the laptop gives better protection to the electronics of the laptop?

  Concerning

  First I put t understand why you create double threads?
  You have already started this discussion here:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=148523

  Double son not permitted! If you follow old thread.

  With regard to your question;
  I first connect the adapter to the laptop, and then I plug the AC adapter into a wall socket cable as described in the user manual.

  But usually it s no matter where you ordered it will connect
  Sometimes I unplug the computer laptop power adapter and use it only with the battery but the adapter remains connected to the wall outlet

• [ISSUE] Network driver HP Pavilion 15-n023sy wireless

  Hi all!

  My laptop is HP Pavilion n023sy 15. There is no driver official support for Windows 7 for this laptop.

  I managed to install Windows 7 64 x on it, with the necessary drivers from other distributions of the HP series. And the only question is left - wireless network adapter. I installed the driver Qualcomm Atheros WLAN 9485 without problem ("Device Manager" presents, it's working properly "), the card is activated. BUT it is there no 'Wireless network search' icon in the status bar. When diagnosing the adapter, it says... «the adapter problems...» "and barrulet shows yellow exclamation mark inside. It seems he's trying to find any router in the area, but can not (Control Panel-> network) and Internet-> "Add a wireless device to the network".

  I have a hundred times already uninstalled the driver of it, installed a different driver versions; tried to install drivers RaLink and Realtek WLAN, which were all.

  Could you advice me, guys, what should I do and how to solve the problem with the wireless network card?

  I really appreciate your response X)

  Hello:

  See if this driver works...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359422&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118499_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken