Question of editing table

Similar Questions

• Any way to edit tables in Textedit or Bean?

  Hello

  I used to use LibreOffice as my preferred burning software but I have questions of sensory processing, strobe and migraines, so I need to ripheriques in order to avoid painful flashing cursors. The demo Pages and NeoOffice, OpenOffice have similar flashing cursors. TextEdit and Bean allow users to turn off blinking cursors if we used the terminal hack to change their schedule.

  Unfortunately, I can't change the tables in Textedit and the bean. I can add or delete rows and columns at the end, but not between existing lines, and I can't copy and move a block of existing lines either.

  Can anyone suggest a way to edit tables in Textedit or bean or other compatible software without flashing cursors?

  My latest project docs are odt and my next will probably be in rtf.

  Thank you!

  (display using OS X El Capitan and crossposting to accessibility because the flashing is a Visual accessibility issue, at least for me).

  Right click-> add a line above works now at the bean. Nothing like it in Textedit.

• The editing table came suddenly on some pages in my doc?

  In a doc of 80 pages, the editing table came on the page, but only on about a third of the pages? Thus, when it has, it affects the zoom shortcuts, i.e. zoom at the editing table has no effect, because the entire area is a big box!

  Problems of cardboard are usually cured by a journey through .idml see remove minor corruption by exporting

  If this does not fix it we're going to need some screenshots and version ID and your operating system.

• Restore the value of the selected line in the editable Table.

  Hello, I use Jdeveloper 11.1.2.1.0.
  
  My problem is:
  1. Select a line in the editable table.
  2. change the value inside elements of the af:inputText of columns.
  3. tap on restore.
  4. the values of the selected line remains the same.
  
  If I select another line, before the restore, the restore will work as expected.
  
  I want to when you press the button cancel the values of the selected row to be rollback-ed as well.

  Set the immediate on all the inputTextFields in the table and it worked.

  Thank you.

• Art hung on the editing table

  I have the art, graphics and photos, hung at the editing table. What I've read, this is unacceptable to send to the printer this way. Is the only solution to crop the images so that they do not extend off the coast of the editing table?

  THX.

  Paul

  Antything on the pasteboadd outside the bleed or slug is ignored and irrelvant. When exporting PDF yo should check that Crop Image data management is enabled.

• You can create a datamerge at the editing table?

  Using InDesign CS5 is anyway that you can create a datamerge at the editing table?

  I want to place the file number in the section of purge for the series of newspaper advertisements. When I try to create a merged document, I am informed that there are no placeholders are present even if I added in the mount table.

  Someone at - it solutions?

  When you configure the placeholder, set the text to get to the bottom of the text box and stretch the text box so that it touches the print area of the page.

• My editing table is really big

  Hello world

  I don't know what I did!  The editing table InDesign used to end a few inches from the edges of each broadcast, and later, it became really large (maybe 4 x the size of the spread?).  It takes forever to scroll, and it is difficult to maintain continuity with this big enough instruction book I've created.

  Fortunately, all of the graphic objects and text are still in place.  It is simply annoying.  Hope someone can help me to get things to look as they did.

  Thank you

  ceilr

  - http://indesignsecrets.com/changing-the-size-of-the-pasteboard.php lists a few solutions. It seems different things work for different people.

• Consistent capture of PRE 7.0, & Questions of edition

  I have a new HFS100 Vixia Canon (AVCHD) and you have installed Premiere Elements 7.0.   Previously, I used a mini-Strip definition camcorder Standard and editing the videos with Windows Movie Maker or Cyberlink Power Director.

  Capture issues:  The media AVCHD import option does not require a fire wire / or provides the remote control.  (I LOVE this feature since I bought a camcorder with flash memory cards so that I could import the media thanks to a reader of cards instead of having to plug the camcorder).  I realize now, but can I also want to import a small segment of a longer scene.  The function to capture AVCHD should have control of the aircraft? If not, can I use the capture of HDV camcorder rather function? Requires my project settings settings?    

  Compliance issues:  After I imported the .mts files, PRE 7.0 automatically goes through a process that says: it is "consistent" files.   Which means "compliant"?  This requires settings of my project settings?

  Questions of edition:  .Mts scenes can be read without SEVERE stutter.   Audio is fine, but the scenes video looks individual distillers with 10-15 second delay until the next image.  Although I plan to upgrade my laptop powered laptop 1 GB RAM to a much longer next month, I'm despearate to edit and publish my first series of videos because they are videos sales of horses, that I'm selling.  Can I do to allow me to edit the files .mts with my current RAM 1 GB system?  I would be happy to drop a quality any setting video just to get this batch of videos edited and produced.

  Thanks in advance for your help.

  Is there anything I can do to allow me to edit the files .mts with my current RAM 1 GB system?

  While the additional RAM will improve your experience of likely change, it is the CPU that gets stressed with AVCHD. What CPU type and speed of your system has. Many strongly suggest a Core2 Quad as the minimum CPU for AVCHD.

  This ARTICLE can help you set up your computer for editing.

  Good luck

  Hunt

• Question to edit the newprods.txt file before you run AD splicer

  Hello
  
  I installed the patch for product KEY.
  And according to the patch (https://updates.oracle.com/Orion/Services/download?type=readme & aru = 11486871), I should edit newprods.txt to reflect the KEY user and usage pattern tablespaces before running adsplicer.
  
  But I have a question about changing the newprods.txt.
  And when I checked this patch file, here it is the content of the file.
  - - - - -
  # Add product, EMEA consultation locations
  
  product = key
  base_product_top = * APPL_TOP *.
  oracle_schema = key
  facteur_redimensionnement = 100
  # Spaces table it can be edited to fit the configuration of database
  main_tspace = CLED
  index_tspace = CLEX
  temp_tspace = TEMP
  default_tspace = CLED
  
  #
  # End control file
  - - - - -
  
  For example, I can leave this file as it is with the default values?
  Otherwise, I'm looking for a very specific to change orientation.
  Can someone help me with this, please?
  
  Thanks in advance,

  Salvation;

  You can use the default, or you can use as below

  product = key
  base_product_top = CLE_TOP
  oracle_schema = key
  facteur_redimensionnement = 100
  # Spaces table it can be edited to fit the configuration of database
  main_tspace = APPS_TS_TX_DATA
  index_tspace = APPS_TS_TX_IDX
  temp_tspace = TEMP
  default_tspace = APPS_TS_TX_DATA

  Please see:
  Re: Reg: produces apps

  Respect of
  HELIOS

• Question of nested tables

  Hello, I need help with something that should be a matter of routine for most of the PL/SQL developers:
  
  I have a type:
  CREATE OR REPLACE TYPE CHFLSRESWSPC.int_array IS ARRAY OF INT;
  
  If I have a variable of type int_array and use BULK COLLECT in will be the result of the query fills the variable. If a question another COLLECTION in BULK IN the same variable using another query then the variable only will contain the result of the second query. I need the variable to add the result of the second in BULK COLLECT (I know I have to use another command in BULK RECUEILLENT not the second time, but I don't know what) to the first and if possible even to exclude duplicates. What is the most effective way. I know not how to loop through the colllection and use MEMBER but is not effective in my case.

  GeO2 wrote:
  Hello, I need help with something that should be a matter of routine for most of the PL/SQL developers:

  I have a type:
  CREATE OR REPLACE TYPE CHFLSRESWSPC.int_array IS ARRAY OF INT;

  If I have a variable of type int_array and use BULK COLLECT in will be the result of the query fills the variable. If a question another COLLECTION in BULK IN the same variable using another query then the variable only will contain the result of the second query. I need the variable to add the result of the second in BULK COLLECT (I know I have to use another command in BULK RECUEILLENT not the second time, but I don't know what) to the first and if possible even to exclude duplicates. What is the most effective way. I know not how to loop through the colllection and use MEMBER but is not effective in my case.

  A single method.

  I used a big collect to fill the second table, you might as well use something like...

    --load values 9 - 15 into array 2 NOT using bulk collect
    v_array_2 := int_array(8, 9, 10, 11, 12, 13, 14, 15);
  

  TUBBY_TUBBZ?   declare
    2    v_array_1     int_array := int_array();
    3    v_array_2     int_array := int_array();
    4    v_final_array int_array := int_array();
    5  begin
    6
    7    --load values 1 - 10 into array 1
    8    select
    9      level
   10    bulk collect into
   11      v_array_1
   12    from dual
   13    connect by level <= 10;
   14
   15    --load values 9 - 15 into array 2 using bulk collect
   16    select
   17      level + 8
   18    bulk collect into
   19      v_array_2
   20    from dual
   21    connect by level <= 7;
   22
   23    v_final_array := v_array_1 multiset union distinct v_array_2;
   24
   25    for x in 1 .. v_final_array.count
   26    loop
   27      dbms_output.put_line(v_final_array(x));
   28    end loop;
   29  end;
   30  /
  1
  2
  3
  4
  5
  6
  7
  8
  9
  10
  11
  12
  13
  14
  15
  
  PL/SQL procedure successfully completed.
  
  Elapsed: 00:00:00.00
  TUBBY_TUBBZ?select * from v$version;
  
  BANNER
  -------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  CORE    11.2.0.2.0      Production
  TNS for Linux: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production
  
  5 rows selected.
  
  Elapsed: 00:00:00.00
  

• Can you do the editable table width in a model

  I am new to html and try to use a template to create a site that will eventually 10-12 pages. All pages will have the same basic design, but some need 1 main body section and some need 2 (1 primary and 1 smaller stop on the side). After 4 pages, I realized that I could use a template so I wouldn't get again all the links in the navigation bar, etc., but if I make a page with just a main section, I'd like to that article is wider. The model, I cannot adjust the table. Is there a way to make the table width editable and adjustable? Thanks for any help you can give me... I'm sure to have many more questions, once this is resolved!

  > OK, so I'm experimenting with a few tutorials and do reading on
  > CSS
  > and I decided to start over and make the site from the ground up with
  > CSS.

  Be prepared to spend the time and effort that this decrease will need.

  > My new question is this: can I use
  > 2 different CSS for the same site?

  Definitely.

  > I would use 1 for pages requiring a
  > column of text and 1 for pages requiring 2 columns. Or is it
  > a
  > allowing to vary the width of the table directly in the CSS?

  Yes and Yes. You can do this with a second linked external CSS file or with
  a single CSS file link and a sheet of style incorporated, or with a single
  linked CSS file and descendant selectors, eg.

  
  

  
  ....
  
  

  or

  
  

  
  ...
  
  

  using CSS like this-

  #oneColumn table {width: 760px ;}}
  #twoColumn table {width: 400px ;}}

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "AH_Nancy" wrote in message
  News:evr56n$7ii$1@forums. Macromedia.com...
  > OK, so I'm experimenting with a few tutorials and do reading on
  > CSS
  > and I decided to start over and make the site from the ground up with
  > CSS. I have
  > think that it will be more work at the beginning (and a better result to the)
  (> end)
  > but less work later... at least I hope. My new question is this: what can I
  > use
  > 2 different CSS for the same site? I would use 1 for pages requiring a
  > column of text and 1 for pages requiring 2 columns. Or is it
  > a
  > allowing to vary the width of the table directly in the CSS?
  >
  > Thanks again for your help.
  >
  > Nancy
  >

• Can change us line selected in ADF without using click to edit table feature.

  JDEV 12.1.3.0

  Hi Experts,

  Is there a way we can select a row in the table and click the button change the Panel collection. While the row becomes editable.

  Whatever row, we select and click on the edit button. This line becomes editable thattime only. Otherwise always disabled.

  Without using click to modify the ADF table feature.

  Thank you

  AR

  I had similar usecase

  Maybe you can tweek this blog to meet your needs

  Born in DeBug: press the Edit button to make editable line Table.

• Editable table automatically updated after the entry line

  Hello

  JDev 11.1.2.4

  In a table of clickToEdit, the editable line has several selectOneChoice and inputText. When the user changes a value in the editable field, the line is automatically updated. The problem is that if a user changes the first field and press tab, because the row is updated, the focus is lost.

  Why the whole line is updated?

  Thnaks

  Go to pageDef and iterator ChangeEventPolicy value = 'none '.

• Enable auditing for editing table

  Hi all

  IM pretty new to Oracle. We had a problem that a of our customer base devastated by some indexes became unusable. These indices are not on a partitioned table. I came to the conclusion that these indices are rendered useless by the action of the user. Is there another explanation? To get a better proof in the future on how an unusable index so I decided to use the audit, I have never done before the audit so would like to get some suggestions from this forum.

  Database: Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0

  OS: Oracle Solaris 10 SPARC 64 bit

  Maybe, but not completely.

  For a Table partitioned, Partition peacekeeping operations can lead to unpartitioned indexes or partitions of a partitioned index becomes UNUSABLE.  It could be captured by the audit.

  SQLLoader direct route which could not leave the unusable index - this could not take advantage of the audit.

  You need to know what operations are performed on the table.

  Hemant K Collette

• Install PT8.53 with Linux question: the PSDBOWNER table doesn't have a line

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture. Server database is the database Oracle 11 GR 1 material. Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  I've been setting up PeopleTools 8,53 Instance database. Because the installation wizard has problem and cannot create instance PT853 database, I have implemented PeopleTools 8,53 PT853 Instance database manually using 2 ways as below:

  First of all, I use Oracle database DBCA to create the instance PT853 successfully, and then run the following scripts:

  (1) utlspace.sql

  (2) dbowner.sql

  (3) psadmin.sql

  (4) psroles.sql

  (5) connect.sql

  After that, the PSDBOWNER table must have a rank DatabaseName (PT853) and OwnerID (myname) Data Mover to connect. But there is no line in PSDBOWNER after running the 5 scripts above. Because of this error, I tried the second way.

  Secondly, I run the script createdb10.sql to create the instance of database PT853 successfully and then run 5 scripts as above but get the same error: PSDBOWNER has no line.

  My $ORACLE_HOME/dbs/initPT853.ora file is correct. All 5 scripts above run correctly. I don't know why PSDBOWNER has no line.

  My question is:

  Can any folk you tell me why PSDBOWNER have a line after you run 5 scripts above? How to solve the problem?

  
  Thank you.

  There is no issue to resolve. PSDBOWNER will be filled when you run step to build and run the Data Mover Import scripts. Even without a line in PSDBOWNER you can still connect to Data Mover mode "bootstrap", which is what you are to do this step.

  Kind regards

  Bob