Question of GG:port manager.

Similar Questions

• Satellite P850 - question about infrared port

  Hello

  I have Windows 8 Pro installed on my laptop and I downloaded all the drivers and everything works well outside the infrared. I've looked everywhere on the internet and I can't find a remote to use with this laptop (especially on the Toshiba site).

  I installed the latest ENE CIR driver (v4.1) as well as the Manager of Toshiba remote (v3.1.0.1). I looked in Program Files to open the command handler Toshiba remote but when I click on the program to open... Nothing happens (including in the notification area).

  So my question is can I actually get a working remotely with this laptop at all, and if not then, what is this infrared port for because I don't find anything on my computer to actually use with/for?

  Thanks for your help: p

  Hello

  Some Satellite P850 models are equipped with the control distance and its possible to use the remote control with Windows Media Center to play discs or videos, see photos and watch recorded TV shows.

  Models who don t understand the a remote controller are * NOT * equipped with an infrared receiver for laptop cannot operate with a remote control.
  The remote was not part of the package for your portable computer does not support the infrared receiver and the Toshiba Remote Control Manager and ENE CIR driver installation was therefore unnecessary

• Another question on serial port communication

  Hi all!

  I started working with tools of communication series LV (actually, I'm a newbie in LV at all).

  The question is - how I effectively detect y at - he new data arrived in the read buffer VISA?

  I mean, in the examples I found, there is always a fixed delay between writing series and the read operation - it makes the instrument depends on the speed of communication and (worse) on the response time of the required device. I want to implement is a vi that writes a (or different applications) via a serial port and then check periodically (with the relatively small period, say, 1ms) series read buffer for the response data until new data stops arriving. For this I need to know the number of bytes of data into the buffer, or a property (if any) detecting the arrival of new data.

  As I read on this forum (and figured out from my own experience)-using VISA bytes to the Serial Port is ' t a good idea also I have found a solution without delay set by the user between the writing and the read operation in the recent previous topics.

  Can you give me an opinion?

  Thnx in advance.

  Use VISARead with a number of bytes to read and a timeout.

  When your data is received it will play instantly. When no data comes in, you will get a time-out error, which you can manage!

• Required for NAC firewall ports manager manage/add the Cisco switch

  Hello

  I am trying to add switches cisco for the NAM, but I am not able to add the switch I get the error "unable to control switch" I tried opening ports 161-162 on the firwall; If I were to allow all traffic between the NAM and the switch, cisco NAM is able to add/manage the switch.

  Do not know what are the other ports may be required for cisco NAM for managing the switch?

  Thank you.

  Hello

  As far as I KNOW, only UDP 161 and 162 for SNMP communication ports must be open.

  Please make sure that you have configured the correct port on the switch:

  (config)# snmp-server host 172.16.1.61 traps version 2c cam_v2 udp-port 162 mac-notification snmp 

  If still does not, I would check the logs on the firewall for any traffic blocked between the cam and the switch.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Satellite Pro M70: Question on the port on the left hand side

  Another question regarding the Pro M70 PSM75E, next to the hard drive (left side) there is a port which you can take off. I took it of and it looks like a chip grafx or something: s someone with the M70 not what it is.

  Thanks again

  Hello

  Well, there are of many Satellite Pro M70. It s a great series.
  But for example Satellite Pro M70-110 has a PCMCIA Type II slot.
  You can use the different PCMICA card in this slot. But they must be compatible.
  I guess this slot machine, you found a plastic Board. This is only for security.

  However, if you want to learn more about your device, I would recommend reading the user manual which must be preinstalled on your laptop. You will find very, very, very ;) useful information.

• Portege 3440CT: Question about media port replicator

  Hi, sorry for my English...

  I have a question:
  I'm looking for a multimedia for my laptop port replicator.

  Do not include the port replicator (PA3042E-1DST) I found a driver for cd/dvd...

  Can I install a standard cd or dvd slim in the multimedia duplicator?
  Or he needs a car?

  Thank you.

  Hello

  I think that you need this one: PA3042E-1DST Multi Media Replicator Port, but according to certain specifications, this port replicator can be used with different options. This means that you must PA3014E - 1DVD DVD Drive Kit or PA3015U-1CDD 24 x CD-ROM Drive Kit II.

  That s all I found.

• Question of COM port

  I don't know if it's a question of LabVIEW, or just a more general question, but in any case I'm stuck!

  A piece of equipment that we have just received the laboratory is a Geokon LC - 2 x 16 data logger , which is used to read in 16 (vibrating wire type) meters of the strain.

  Unfortunately, data acquisition comes with its own proprietary software, I still love to avoid if possible.

  The reason is that I have a lot of different pieces of instrumentation and I wish I had all the coordinates in LabVIEW for various reasons, but basically I just have more control and customization in this way.

  In all cases, Geokon software must be running in order to execute the Datalogger (caused by excitation of the strain gauges, communication, etc.).

  This software communicates with the data acquisition via a COM port.

  My hope was that I could just use LabVIEW to listen for traffic on that port and I was able to analyze the data as it came out of a "backdoor" to this type of solution. Once I have given, I can do what I need to do in LabVIEW and avoid other software entirely.

  Here's the problem though: If the software Geokon is connected to this specific COM port (i.e. COM 3), no other software can connect to this port simultaneously. I tried with LabVIEW and same Hyperterminal, or to not seem to work.

  Someone at - it an idea on how I could go about this?

  Cory,

  The manual for this contains all ASCII commands for configuration/control instrument.  Should you need to create your own LV driver.

• Said device USB to serial port Manager works, but it is not

  Original title: PL2303 USB to Serial No. GB
  My laptop is running Windows 7. I loaded the drivers PL2303. The Manager of said devices usb-serial comm port works. Set at 9600 baud, 8 No 1 order no flow.
  The GPS is a Garmin etrex Euro software version 2.06. GPS version model 156 206.
  I communicate successfully with the GPS unit via an DB9pin port at the back of my office. 9600 8 No 1 Garmin format.
  When I added the USB cable series to communicate via a usb port the "EasyGPS'program cannot read the GPS.

  I down loaded the PL2303 drivers for my desktop (XP) and the same problem occurs.

  I get the message ' device working properly "for both laptop and desktop."
  There is however no communication to the GPS.
  I tried again via the DB9pin port and communication are OK.

  Any Suggestions
  Thanks, Jim

  Hello

  I suggest you to join easygps helpdesk on this issue.
  www.EasyGPS.com/support.asp

• port management and control for nm-cids

  Any body can help me to find the difference between the ip address we use to ID-sensore 1/0 interface and ip address of the sensor and its default gateway

  10.10.10.2/24,10.10.10.1

  JOINT-2 information.

  There are 8 interfaces of interest when it comes to the JOINT-2.

  4 If the interfaces belong to the JOINT-2 itself.

  4 other interfaces are the switch ports connected to these 4 JOINT-2 interfaces.

  The management of the JOINT-2 interface is ' GigabitEthernet0/2 '.

  When you assign an IP to the JOINT-2 is the interface where the IP address is assigned.

  On the backplane of the switch it will connect to a corresponding switch port.

  In the BONE of cat is "/ 2", and in the IOS is the "management-port intrusion detection module.

  These switch ports must be assigned to what ever vlan door network address assigned to the interface JOINT-2 s Gig0/2.

  The ' GigabitEthernet0/7 and GigabitEthernet0/8' JOINT-2 are the JOINT-2 control interfaces and must be assigned to the AnalysisEngine for surveillance.

  On the backplane of the switch they will connect to 2 corresponding switch ports.

  In the BONE of cat, they are "/ 7" and "/ 8", in IOS, they are "detection module of intrusion-modem 1" and "data-port 2". ""

  You will need to set these ports as capture ports if follow on promiscuity, OR vlan unique ports (access-ports) if making pair interface online monitoring or ports of junction If inline vlan pair followed to do.

  "GigabitEthernet0/1" of the JOINT-2 is not configurable on JOINT-2 and is used only for sending TCP resets in promiscuous mode.

  On the backplane of the switch it will connect to a corresponding switch port.

  In the BONE of cat is "/ 1 ' and should be left a trunk port routing all the VLANS. In IOS this port is not considered in the configuration that the user never needs to change the configuration of this port.

  There are also 3 to 6 ports that are visible in the BONE of cat. But none of these 4 ports are connected to anything on the JOINT-2 module itself and can be ignored safely. These ports are not at all in IOS.

• Basic questions about the port of Vsphere mirror

  I set up a lightweight VM that would deal with inter-VM traffic. To do this, I want to activate the duplication of port between virtual machines.

  
  

  I have ESXi 5.5 Update 1 installed, use the Vsphere (no webclient) client. I see no duplication of port capacity on my Vsphere Client

  

  I have some very basic questions:

  (1) all documentation I've read involving 'Port mirror' is done via web Vsphere client. Vsphere is provided with Vcenter (please, correct me if I'm wrong)

  (2) only functions with "Distributed Virtual Switch", not "switch vSphere Standard" port mirroring. How can I activate "Distributed Virtual Switch"? What products can I download/install and try (suppose I go to the user a license for 60 days)

  (3) exist what API to enable/disable/setup Port mirroring?

  (1) all documentation I've read involving 'Port mirror' is done via web Vsphere client. Vsphere is provided with Vcenter (please, correct me if I'm wrong)

  Because the mirror of port requires a distributed switch, you will need to vCenter Server and once in vCenter Server, you can the vSphere Web Client of the user or the vSphere Client (c# version).

  (2) only functions with "Distributed Virtual Switch", not "switch vSphere Standard" port mirroring. How can I activate "Distributed Virtual Switch"? What products can I download/install and try (suppose I go to the user a license for 60 days)

  You can download the server vCenter Server (60 day trial) and you'll have an Enterprise Plus version for your ESXi host vSphere.

  (3) exist what API to enable/disable/setup Port mirroring?

  Check the comments of this blog: http://blogs.vmware.com/vsphere/2013/01/vsphere-5-1-vds-feature-enhancements-port-mirroring-part-1.html

• Question of vCO Port connecting to vCenter

  Hi all

  I have a problem that I hope can be easily solved. I'm pretty sure I know what the question is, just not how to correct it. When I created vCO to connect to vCenter I get the error "Exception," org.apache.http.conn.HttpHostConnectException: connection to http://vcenter.domain.com:80 denied ' "» What I know about the environment, vCenter here is actually using port 8080 for http connections. I can't change this behavior in vCO so far. Here are two screenshots for configuration and the error itself:

  

  

  No way to change the port vCO tries to use on the side of http, or just something that I'm missing (seems likely )?

  Thank you!

  ~ Brandishes

  jaytindel,

  Apparently I completely missed this all the time, while I was completely up to date with the generation which implement a 'solution' to this question, there is always a workaround solution that must be followed. A VMware support engineer guided me to a KB and using the solution of creating a workflow to add the vCenter Server works in fact for me. This is the KB:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2042461

  Let me know if you encounter any problems with it.

  ~ Brandishes

• Explanations on lawless VMKernel & port management pour network configuration

  Hello

  When my money of VCenter configurations, I understand a little better connections in the VSwitches ports VMKernels and Managements of Port.

  Is this the same chosen?

  Thanks in advance

  Under ESX on was 3 types of ports/network:

  -Console of Service-> dedicated to the administration of the ESX

  -VMKernel: Used pour storage NAS and iSCSI-> allows you to Allocate an IP to the ESX

  -VM Network: Ream pour create the network of virtual machines

  Under ESXi, there is more service Console, everything is now in the vmkernel. 'Network management' is the name given to the vmkernel port created during installation of the ESXi and on which to active the ESXi management

  Eric

• A question about the observer managed by Grid Control

  Hello everyone
  
  My environment:
  
  Primary database:
  Single instance 11.1.0.7
  S.O.: SLES 10 SP2 x86_64
  
  Database pending:
  Single instance
  S.O.: SLES 10 SP2 x86_64
  
  Observer:
  Director of customer Oracle 11 g 1 material x86_64
  S.O.: SLES 10 SP2 x86_64
  
  Reading Oracle documentation, I found the documentation of Oracle Data Guard I have to install the Oracle Database 10g software package to manage the observer by Enterprise Manager.
  
  My question is that I have to install Oracle Database 10 g software to manage the observer by Oracle Grid Control 11 g?
  
  
  Thank you very much

  My question is that I have to install Oracle Database 10 g software to manage the observer by Oracle Grid Control 11 g?

  Always an observer should be third machine, which isn't yet primary/secondary.
  You have no need to install grid ORACLE_HOME, simply install the agent on the third server, so this Agent will download all the information on the GRID.
  That's what you're looking for?

• Question about how Oracle manages the Redo logs

  Hello
  
  Assuming a configuration which consists of 2 redo log groups (groups A and B), each group of 2 disks (disks A1 and A2 for Group A) and B1 and B2 disks for Group B. Additionally, assume that each redo log file resides by itself in a disk storage device and that the device is dedicated to her. So in the situation described above, there are 4 discs, one for each redo log file, and each disc contains nothing other than a redo log file. Also, assume that the database is in ARCHIVELOG mode and the files from archive is stored on another different set of devices.
  
  kind of graphically:
  

      GROUP A             GROUP B
  
        A1                  B1
        A2                  B2

  The question is: when the disks that make up the Group A are filled and Oracle switches to the disks in the Group B, can the group drives to take offline, perhaps even physically removed from the system if necessary without affecting the functioning of the database? Can the archiver process temporarily delayed until the disks (which have been removed) are presented online or is the DBA have to wait until the end of the process to archive a copy of the redo log file creating in archive?
  
  Thank you for your help,
  
  John.

  Hello
  A journal of the groups fall

  To remove a group of online redo logs, you must have the ALTER DATABASE system privilege. Before you delete a line redo log group, consider the following precautions and restrictions:

  * An instance requires at least two groups of files logging online, regardless of the number of members in the groups. (A group is one or more members.)
  * You can delete a group of newspapers online redo only if it is inactive. If you need to drop the current group, first force a log switch occurs.
  * Make sure a group of online redo logs is archived (if archiving is enabled) before dropping. To see if this happens, use the view LOG V$.

  SELECT GROUP #, ARCHIVED, STATUS FROM V$ LOG;

  GROUP # ARC STATUS
  --------- --- ----------------
  1 ACTIVE YES
  2. NO CURRENT
  3 INACTIVE YES
  4 INACTIVE YES

  Delete a group of newspapers online redo with the SQL ALTER DATABASE statement with the DROP LOGFILE clause.

  The following statement drops redo log group number 3:

  ALTER DATABASE, DROP LOGFILE GROUP 3;

  When a group of online redo logs is deleted from the database, and you do not use Oracle managed files, operating system files are not removed from the disk. Instead, control of the associated database files are updated to remove members of the Group of the database structure. After deleting a group of online redo logs, make sure the drop completed successfully and then use the command of operating system appropriate to delete the dropped online redo log files.

  When you work with files managed by Oracle, the cleaning of operating system files is done automatically for you.
  Your database will not be affected as you can work with 2 files, redo log in each group, as the minimum number of redo log in a database file is two because the process LGWR (newspaper writer) writes in the redo log in a circular way. If the process crashes because you have 2 groups only if you want to remove 1 Add a third and make that the current group and remove the one you want to be offline.

  Please refer to:
  http://download.Oracle.com/docs/CD/B10500_01/server.920/a96521/onlineredo.htm#7438
  Kind regards
  Mohamed
  Oracle DBA

• Question about Firewire Port on Satellite Pro P200

  Can someone tell me if I can connect an audio interface (firewire) to the nearest port of the front on the left side of my P200?

  A friend told me that I would need a port like this: [http://www.hardware-one.com/reviews/Yamaha8824FXZ/images/FirewireSocket.jpg] Although the port of P200 is smaller: [http://pix.crutchfield.com/lifestyle/2001/l4PinFirewireJack.jpeg]

  The interface, I am considering buying this: [http://www.dolphinmusic.co.uk/page/shop/flypage/product_id/15527]

  Welcome advice,

  saibhir

  Hello

  I guess that the support of the Satellite Pro P200 4pol firewire (IEEE 1394) port.
  Your external audio device supports firewire 6pol ports.
  That's why you need a cable or an adapter which favour both standards firewire; 4pol and 6pol

  I think a cable like this should help you connect audio devices for satellite Pro P200

  [4 pin (left) and 6-pin (right) connectors FireWire. | http://upload.wikimedia.org/wikipedia/commons/f/f7/FireWire_cables.jpg]

  Concerning