Question of query result table

Similar Questions

• Need help to build the query/pl-sql block to get the query result and the name of column from DB table in the form of key-value pairs.

  Hi Experts,

  I have a DB table has columns of more than 50.

  I question this table, it should only return one line at any time. as sqldeveloper below image.

  

  here, I need to build block pl/sql-query, Discover the column in the table as a key and query result as values.

  Eg:     Key                         -  Value

  TASK_EVENT_ID - 1765

  EVENT_TYPE - ASR_UPDATE

  ... etc until all of the columns in my table.

  Experts please comment on that point, appreciate your help on this.

  Thank you

  -Vincent.

  Here is an approach using DBMS_SQL to iterate over the columns of key / value to assign... (Little code snipped for brevity)

  create or replace procedure (task_expired)

  v_store_id in full,

  v_task_action_id in full,

  v_job_id in full

  )

  as

  -[SNIP code...]

  v_sql VARCHAR2 (4000): = ' select * from my_table where PK = 123';  -Your SQL here!

  v_v_val VARCHAR2 (4000);

  v_n_val NUMBER;

  v_d_val DATE;

  v_ret NUMBER;

  c NUMBER;

  d NUMBER;

  col_cnt INTEGER.

  f BOOLEAN;

  rec_tab DBMS_SQL. DESC_TAB;

  col_num NUMBER;

  vAsString VARCHAR2 (4000);

  BEGIN

  -[SNIP code...]

  Message_properties. CORRELATION: = "EDF_EVENT";

  MSG: = SYS. AQ$ _JMS_BYTES_MESSAGE. Construct();

  Msg.set_string_property ('queueName', ' shipping/csi_cth');

  Msg.set_string_property ('MODE', 'CR8');

  c: = DBMS_SQL. OPEN_CURSOR;

  DBMS_SQL. PARSE (c, v_sql, DBMS_SQL. NATIVE);

  d: = DBMS_SQL. Execute (c);

  DBMS_SQL. DESCRIBE_COLUMNS (c, col_cnt, rec_tab);

  1.col_cnt J

  LOOP

  CASE rec_tab (j) .col_type

  WHEN 2 THEN

  DBMS_SQL. DEFINE_COLUMN (c, j, v_n_val);      -Number

  WHEN 12 CAN

  DBMS_SQL. DEFINE_COLUMN (c, j, v_d_val);      -Date

  ON THE OTHER

  DBMS_SQL. DEFINE_COLUMN (c, j, v_v_val, 2000);   -Else treat as varchar2

  END CASE;

  END LOOP;

  LOOP

  v_ret: = DBMS_SQL. FETCH_ROWS (c);

  WHEN OUTPUT v_ret = 0;

  1.col_cnt J

  LOOP

  -Fetch each column to the correct data type based on coltype

  CASE rec_tab (j) .col_type

  WHEN 2 THEN

  DBMS_SQL. COLUMN_VALUE (c, j, v_n_val);

  vAsString: = to_char (v_n_val);

  WHEN 12 CAN

  DBMS_SQL. COLUMN_VALUE (c, j, v_d_val);

  vAsString: = to_char (v_d_val, ' DD/MM/YYYY HH24:MI:SS');

  ON THE OTHER

  DBMS_SQL. COLUMN_VALUE (c, j, v_v_val);

  vAsString: = v_v_val;

  END CASE;

  Msg.set_string_property (rec_tab (j) .col_name, vAsString);

  END LOOP;

  END LOOP;

  DBMS_SQL. CLOSE_CURSOR (c);

  DBMS_AQ. ENQUEUE (queue_name-online 'cbus.aqjms_common',

  Enqueue_options => Enqueue_options,

  Message_properties => Message_properties,

  Payload-online msg,

  Msgid => Message_handle);

  dbms_output.put_line ('00 Msgid =' |) Message_handle);

  dbms_output.put_line('===Done=');

  -[SNIP code...]

  END;

  /

• the query results to table 2d

  I have a list created dynamically IDs I want to query a table
  for matching records for one of the IDs. I can run a loop of the list
  the query, but what is the best way to put all of the matching records
  each individual ID into a single statement of output? I question 7
  different columns, so if I use a table it would need to be 2
  dimensional and I do not know how to write the results of the query to a 2d
  table. Or y at - it an easier way for the release of all data without
  put in a picture at all?
  
  Here is the corresponding code so far:
  
  

  Change your code to the attachment to start (no loops!):

• Refresh the result table or rerun the query

  I have a requirement, simple but stuck somewhere.

  Jdev 11.1.1.17 Expert level: Mid-Senior

  I have a form of application and the associated result table. It works great and no problems.

  My requirement is that I have a commandlink on one of the column. Clicking on that will open a popup with an editable filed. OK will commit and Cancel will close the pop-up window.

  After that the popup is dismissed with partial trigger, my table refreshes but data is identical to the front. But if I click the Find (Search) button on the query, it shows the data with the results updated which are changed in the pop-up window above.

  How do I update table which re - runs the query and then refreshes the table after the popup is dismissed, or when the user clicks the OK button in the pop-up window.

  Get on the viewObject of this table and call the executeQuery method that

  Write this method in the method AMImpl and then call it in bean managed using the OperationBinding at the click on the Ok button of the dialog box

  ViewObject vo = this.getViewObjectName ();

  vo.executeQuery ();

  Ashish

• Two criteria in mind: one for af:query, second with bind var, both use same result table

  JDeveloper 12.1.2

  I have two display criteria, VC1 and VC2 are based both on the same VO. For example, let's say that I have used VO

  SELECT Employees.EMPLOYEE, Employees.EMPLOYEE_ID, Employees.FIRST_NAME, Employees.LAST_NAME, Employees.DEPARTMENT_ID

  Employees;

  Let this be VC1:

  SELECT * from (SELECT Employees.EMPLOYEE, Employees.EMPLOYEE_ID, Employees.FIRST_NAME, Employees.LAST_NAME, Employees.DEPARTMENT_ID

  EMPLOYEES employees ) QRSLT WHERE 1 = 2

  
  

  Used for af:query

  
  

  So let's say I have VC2 with bind variable

  
  

  SELECT * from (SELECT Employees.EMPLOYEE, Employees.EMPLOYEE_ID, Employees.FIRST_NAME, Employees.LAST_NAME, Employees.DEPARTMENT_ID

  EMPLOYEES employees ) QRSLT WHERE 1 = 2 AND ((UPPER (QRSLT. Department_id) = UPPER(:DeptIdBind))) )

  The user runs the af:query research and resulting table lists some employees. The last value of the column in the table of results, I did as links:

  < af:column headerText = 'Department' id = "c1" width = "140" >

  < af:link shortDesc = "#{bindings.myVO.hints.DepartmentId.tooltip}" id = "ot4" text = ' #{row. "" DepartmentId}'

  action = "#{backingBeanScope.MyBean.byDept}" partialTriggers =": t1" / >

  < / af:column >

  If the user now clicks on the link, I would expect the following:

  1. the values entered in the af: query to stay

  2. the table refreshes since the underlying VC2 is defined and executed VO. Here is the code VOImpl and backingbean

  The bean of support code

  public String byDept() {}

  Links DCBindingContainer = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  DCIteratorBinding dcItteratorBindings = bindings.findIteratorBinding("EmployeesIterator");

  Line r = dcItteratorBindings.getCurrentRow ();

  Object keyvar = r.getAttribute ("DepartmentId");

  OperationBinding searchExp = ADFUtils.findOperation ("searchByDept");

  searchExp.getParamsMap () .put ("deptId", keyvar);

  searchExp.execute ();

  Returns a null value.

  }

  Impl VO

  {} public void searchByDepartment (String deptId)

  setDeptIdBind (deptId);

  executeQuery();

  }

  Problem:

  Query (VC2) runs but table does not reflect that. That is to say I don't see the list of employees of the selected Department

  Any idea?

  RPP = partial page request

  PPR refresh a component jsf

  AdfFacesContext.getCurrentInstance () .addPartialTarget (UIComponent);

  Where component is the component that you want to refresh.

  Have you checked that the query executed vc ID?

  Timo

• Newb question: SQL query on an imported table

  Hi all. I'm a newb, that this issue will probably tell you!
  But I am very interested to familiarize themselves with the Oracle environment.
  
  I installed 10g Express.
  I was able to set up a new user (schema) profile?
  
  I created a new table, by importing an Excel file, saved as a CSV file. It has a PK.
  
  When I log in as an administrator, I can see the table 'discovers' the content.
  However, I can't run a SQL command with the new table.
  It is said Table or view does not exist.
  
  The table is called "Customers" and contains a column called "City" and I type City Select From Customers.
  
  Like the Adminisistrator, I have "given" all the rights for the new table to my profile newly created (schema).
  When I connect as long as this new person, I can't see the new table imported into the list of tables, yet alone to run an application or a SQL to it. What did I miss?
  
  Any tips will be appreciated. Glyn gray...
  
  Published by: user12501005 on February 7, 2010 11:26

  Hello

  You wrote:
  The original table is still visible to the diagram of the system, but he reports yet again as saying that the table does not exist when I try SQL.
  So is there a reason why a table imported is visible to the user DBA, but SQL does not exist?
  The other imported tables, those the DBA can run SQL still aren't visible to other users (schemas).
  The DBA has "tuned" EVERYTHING to the default HR schema.
  When I connect like HR, I'm unable to find the given table and SQL reports that the table does not exist.

  If I understand that you have created a Table in the schema of the SYSTEM, and you cannot question him by SQL.

  For example, if you then create a table A in the diagram of SYSTEM, you can view the table A if you connect to the database
  SYSTEM or any intended user he has the privilege to CHOOSE ANY TABLE.

  If you are connected to a user (for example, HR), which does not have this privilege, you can not query the Table.

  If you have a privilege to HR as follows:

  connect system/
  grant select on A to HR;
  

  Then you can query the Table has to HR:

  connect HR/
  select * from system.A;
  

  Hope this helps.
  Best regards
  Jean Valentine

• Need help with a query result

  Oracle Version: 11.2.0.2.0

  I need assistance with the output of the query. Here is the table.

  With Tbl_Nm as

  (

  Select 'ABC1' SYSTEM_ID, REGION 'US', 'CHI' SUB_REGION 4000 BALANCE, to_date('1-JUN-2012 10:45:00 am', 'dd-mon-yyyy hh:mi:ss am') LAST_UPD_TIME, 'A' FLAG of union double all the

  Select 'PQR2', 'UK', 'LN', 2000, To_Date('1-JUL-2012 10:46:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select 'ABC1', 'IND","MAMA", 3500, To_Date('1-AUG-2012 11:47:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "LMN3", "US", "NJ", 2500, To_Date('1-SEP-2012 09:49:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "PQR2", "UK", "MC", 2600, To_Date('1-OCT-2012 04:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select 'ABC1', 'US', 'NY', 3200, To_Date('1-OCT-2012 06:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select "LMN3", "UK", "BT", 2400, To_Date('1-NOV-2012 07:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' From Dual

  )

  Select * from tbl_nm

  I need the output below.

  PQR2 UK MC 2600 1 OCTOBER 2012 04:45

  ABC1 US NY 3500 October 1, 2012 06:45

  LMN3 UK BT 2500 November 1, 2012 07:45

  The need the disc according to this system_id flagged as "A". But if the last disc of 'd' then it must show that the amount, but the file should be displayed in 'A '.

  I've tried a few and got stuck. Help, please. Not able to get a balance '.

  This question is a bit similar to needing help with a query result

  With Tbl_Nm as

  (

  Select 'ABC1' System_Id, region 'US', 'CHI' Sub_Region, 4000 balance, To_Date('1-JUN-2012 10:45:00 am', 'dd-mon-yyyy hh:mi:ss am') Last_Upd_Time, 'A' flag of double Union All

  Select 'PQR2', 'UK', 'LN', 2000, To_Date('1-JUL-2012 10:46:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select 'ABC1', 'IND","MAMA", 3500, To_Date('1-AUG-2012 11:47:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "LMN3", "US", "NJ", 2500, To_Date('1-SEP-2012 09:49:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "PQR2", "UK", "MC", 2600, To_Date('1-OCT-2012 04:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select 'ABC1', 'US', 'NY', 3200, To_Date('1-OCT-2012 06:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select "LMN3", "UK", "BT", 2400, To_Date('1-NOV-2012 07:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' From Dual

  )

  Select System_Id, region, Sub_Region, Balance, Last_Upd_Time of Tbl_Nm T1

  where t1. Last_Upd_Time = (select max (Last_Upd_Time) in the Tbl_Nm T2 where T1.) SYSTEM_ID = T2. SYSTEM_ID)

  So maybe you'd then

  ORDER BY DECODE(flag,'D',9,1) ASC...

  to get the Ds at the end of the list.

  or

  ORDER BY CASE WHAT flag = has ' (your other filters) AND then 9 or 1 end CSA,...

  HTH

• Duplicates in hierarchical query results

  Please use the suite of applications:

  CREATE TABLE EMP

  (NUMBER OF EMP_ID,

  EMP_NAME VARCHAR2 (50).

  NUMBER OF MANAGER_ID

  );

  INSERT INTO EMP VALUES(1,'SCOTT',);

  INSERT INTO EMP VALUES(2,'JOHN',1);

  INSERT INTO EMP VALUES(3,'ROB',2);

  INSERT INTO EMP VALUES(4,'MIKE',2);

  INSERT INTO EMP VALUES(5,'BOB',);

  INSERT INTO EMP VALUES(6,'JEFF',5);

  COMMIT;

  SELECT * FROM EMP, (SELECT EMP_ID FROM EMP WHERE EMP_ID IN (1.5)) TEMP

  START BY EMP. EMP_ID = TEMP. EMP_ID

  CONNECT BY PRIOR EMP. EMP_ID = EMP. MANAGER_ID;

  Basically, I first spend a few emp_ids a subquery and then want to see all records in the table emp which are direct or indirect of those emp_ids children.

  But I get a lot of duplicate records. Can someone explain what is the reason behind this? I can use SEPARATE and spend, but there could be a problem with my request in the first place.

  Help, please!

  Thank you

  RN

  Hello

  RN says:

  Please use the suite of applications:

  CREATE TABLE EMP

  (NUMBER OF EMP_ID,

  EMP_NAME VARCHAR2 (50).

  NUMBER OF MANAGER_ID

  );

  INSERT INTO EMP VALUES(1,'SCOTT',);

  INSERT INTO EMP VALUES(2,'JOHN',1);

  INSERT INTO EMP VALUES(3,'ROB',2);

  INSERT INTO EMP VALUES(4,'MIKE',2);

  INSERT INTO EMP VALUES(5,'BOB',);

  INSERT INTO EMP VALUES(6,'JEFF',5);

  COMMIT;

  SELECT * FROM EMP, (SELECT EMP_ID FROM EMP WHERE EMP_ID IN (1.5)) TEMP

  START BY EMP. EMP_ID = TEMP. EMP_ID

  CONNECT BY PRIOR EMP. EMP_ID = EMP. MANAGER_ID;

  Basically, I first spend a few emp_ids a subquery and then want to see all records in the table emp which are direct or indirect of those emp_ids children.

  But I get a lot of duplicate records. Can someone explain what is the reason behind this? I can use SEPARATE and spend, but there could be a problem with my request in the first place.

  Help, please!

  Thank you

  RN

  Thanks for posting the CREATE TABLE and INSERT statements; It is very useful.

  When you do CONNECT BY and joins in the same query (sub-), joins are made first, and then CONNECT BY is performed on all results of the joints.  In this example, you make a cross of PMCs and this join called temp.  Let's see what the result set looks like:

  SELECT *.

  WCP

  ,       (

  SELECT emp_ID

  WCP

  WHERE emp_id IN (1.5)

  ) temp

  ;

  Output:

  EMP_ID, EMP_NAME MANAGER_ID EMP_ID

  ---------- ---------- ---------- ----------

  1 SCOTT 1

  2 1 1 JOHN

  3 ROB                 2          1

  4 1 2 MIKE

  5 BOB                            1

  JEFF 6 5 1

  1 SCOTT 5

  2 1 5 JOHN

  3 ROB                 2          5

  4 2 5 MIKE

  5 BOB                            5

  6 5 5 JEFF

  Now, you do a CONNECT BY query on the result set.  As you can see, there are 2 lines with emp_id = 2 in the set of results above, which explains why there are 2 lines in your query results with emp_id = 2.  Similarly, the output defined above, there are 2 lines with emp_id = 3, and they all have two manager_id = 2, each of them is considered to be a child of each of each of the 2 rows with emp_id = 2, and therefore, you have 2 * 2 = 4 lines with emp_id = 3 in the output CONNECT BY.

  What is a cross here join?  Why must you temp?  Why not just a CONNECT BY questioning one emp, like this:

  SELECT *.

  WCP

  START WITH emp_id IN (1, 5)

  CONNECT BY PRIOR Emp_id = manager_id

  ;

  ?

• Help on the game of query results

  Hi gurus,

  Have this survey for my requirement of dataset sql.

  Sample, it's that I have to pick up the nonfunctional currency transactions.

  Lets say for a given month, data that are present are for CurrencyA and CurrencyB for a particular account.

  Account1 has a transaction does not work CurrencyA and CurrenyB then Account2 has only transaction to CurrencyB.

  My current query result is that the 3 first lines, what I need is the 4th should also appear and be included.

  CurrencyA - amount - account1

  CurrencyB - amount - account1

  CurrencyB - amount - Account2

  CurrencyA - < '0' / or null >-Account2

  I think that my request is based on the currency < x > I have, so it should be for each account, he has all the lines for each currency.

  If please notify and let me know your thoughts.

  Kind regards

  Hello

  It looks like you want an outer join partitioned.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the results desired from these data.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• Query result cache

  Today I test the query result cache, but the result is not as I expected. Please give a few advices.thank you in advance.

  SQL > create table (qrc_tab)

  Number 2);

  Table created.

  SQL > insert into qrc_tab values (1);

  1 line of creation.

  SQL > insert into qrc_tab values (2);

  1 line of creation.

  SQL > insert into qrc_tab values (3);

  1 line of creation.

  SQL > insert into qrc_tab 4;

  1 line of creation.

  SQL > insert into qrc_tab values (5);

  1 line of creation.

  SQL > create or replace function slow_function (p_id in qrc_tab.id%TYPE)

  2 back qrc_tab.id%TYPE DETERMINISTIC AS

  3 BEGIN

  4 DBMS_LOCK.sleep (1);

  5 return p_id;

  6 end;

  7.

  The function is created.

  SQL > set timing on

  SQL > select slow_function (id) in the qrc_tab;

  SLOW_FUNCTION (ID)

  -----------------

  1

  2

  3

  4

  5

  Elapsed time: 00:00:05.01

  SQL > select / * + result_cache * / slow_function (id) of qrc_tab;

  SLOW_FUNCTION (ID)

  -----------------

  1

  2

  3

  4

  5

  Elapsed time: 00:00:05.00

  SQL > select / * + result_cache * / slow_function (id) of qrc_tab;

  SLOW_FUNCTION (ID)

  -----------------

  1

  2

  3

  4

  5

  Elapsed time: 00:00:05.00

  SQL > select / * + result_cache * / slow_function (id) of qrc_tab;

  SLOW_FUNCTION (ID)

  -----------------

  1

  2

  3

  4

  5

  Elapsed time: 00:00:05.00

  I wonder why time is not fast? Help, please

  create or replace function slow_function (p_id in qrc_tab.id%TYPE)

  return qrc_tab.id%TYPE result_cache DETERMINISTIC AS

  Start

  DBMS_LOCK. Sleep (1);

  return p_id;

  end;

  /

  --

  John Watson

  Oracle Certified Master s/n

• Need help to understand the query result

  Hi gurus

  I was reading one of the question here in this forum and its link is below:

  Query required for scenario

  I had some confusion related to this code and don't understand the logic of the out put, see query below:

  Query

  with sub_services as

  (

  Select su_seq 12323, 'HLR1' so_id, 1 seq Union double all the

  Select su_seq 12323, "HLR2' so_id, seq 2 Union double all the

  Select su_seq 12323, "A09" so_id, seq 3 of all the double union

  Select su_seq 12333, "MO1" so_id, seq 4 Union double all the

  Select su_seq 12333, "MO2' so_id, seq 5 Union double all the

  Select su_seq 12333, "A09" so_id, 6 seq in union double all the

  Select su_seq 12333, 'M0CR' so_id, seq 7 Union double all the

  Select su_seq 12999, "LOL1' so_id, seq 8 Union double all the

  Select su_seq 12999, "LOL2' so_id, seq 9 double

  )

  Select *.

  of sub_services b

  where exists (select 1 from sub_services

  where su_seq = b.su_seq

  and so_id = 'A09.

  )

  order by 2;

  The query result

  12323 A09 3

  12333 6 A09

  12323 HLR1 1

  12323 HLR2 2

  12333 M0CR 7

  12333 4 MO1

  12333 5 MO2

  According to my understanding, the above query should return records in red only because of her is below command

  It exists (select 1 from sub_services

  where su_seq = b.su_seq

  and so_id = 'A09.

  but don't know why he's back 7 files, can someone help me understand the result...

  It is query is functionally identical to the PL/SQL block, but much more effective.

  declare

  number of l_res;

  Start

  for line (select *)

  sub_services) loop

  Start

  Select 1 from l_res

  of sub_services

  where su_seq = row.su_seq and

  so_id = "A09" and

  rownum = 1;

  exception when

  NO_DATA_FOUND then

  null;

  end;

  end loop;

  end;

  Essentially every row in the outer query are tested against him exists query.  Given the correlation between two requests is based only on su_seq each line with a su_seq value returned by him is returned in the output.

  Another way to think he uses instead a join condition.  This query is equivalent to the query to exist

  Select the main

  of main sub_services

  Join select (separate su_seq

  of sub_services

  where so_id = "A09") cond

  We main.su_seq = cond.su_seq;

  John

• Publish everything in running the publishing application ATG - CRS Server. Unable to query the table 'das_id_generator '.

  Hello

  I use ATG version 10.2 and you have configured CRS application by IMC. All data import and deployments have been successful.

  Applications of short (MDEX 6.4.1, CASE 3.2.1 6.4.1.2, tools and Framework 3.1.2 platform services) are running: port 8006, 8500, race 8888.

  Now MY PROBLEM IS in TWO PARTS:

  PART 1)  Ran the store on jboss, has worked well, core application started without any error.  When trying to load the homepage, get following error message:

  16:42:25, 926 full repository INFO [SEORepository] SQL boot

  16:43:32, 653 ERROR [DynamoServlet]

  CAUGHT AT:

  Container: ATG.servlet.jsp.ContainerJspException: Cannot find the named component: / atg/registry/Slots/HomeTheme; Source: javax.servlet.ServletException: Cannot find the named component: / atg/registry/Slots/HomeTheme

  at atg.taglib.dspjsp.ParamTag.doStartTag(ParamTag.java:419)

  at org.apache.jsp.navigation.gadgets.homePagePromotions_jsp._jspx_meth_dsp_005fparam_005f0(homePagePromotions_jsp.java:1021)

  at org.apache.jsp.navigation.gadgets.homePagePromotions_jsp._jspService(homePagePromotions_jsp.java:219)

  at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)

  at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:369)

  at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:322)

  at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

  at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:638)

  at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:543)

  at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:480)

  at atg.servlet.WrappingRequestDispatcher.include(WrappingRequestDispatcher.java:123)

  at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:883)

  at org.apache.jsp.index_jsp._jspx_meth_dsp_005finclude_005f1(index_jsp.java:633)

  to org.apache.jsp.index_jsp.access$ 1 (index_jsp.java:622)

  to org.apache.jsp.index_jsp$ Helper.invoke1 (index_jsp.java:685)

  to org.apache.jsp.index_jsp$ Helper.invoke (index_jsp.java:711)

  at org.apache.jsp.tag.web.store.pageContainer_tag._jspx_meth_c_005fwhen_005f1(pageContainer_tag.java:2757)

  at org.apache.jsp.tag.web.store.pageContainer_tag.doTag(pageContainer_tag.java:812)

  at org.apache.jsp.index_jsp._jspx_meth_crs_005fpageContainer_005f0(index_jsp.java:598)

  at org.apache.jsp.index_jsp._jspx_meth_dsp_005fpage_005f1(index_jsp.java:565)

  at org.apache.jsp.index_jsp._jspService(index_jsp.java:127)

  at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)

  ...........................

  ...........................

  ...........................

  ...........................

  At this point, the CRS page opens but no short content. Don't load no registration, no image on the home page does display, NO SEARCH BOX displayed in the header.

  PART 2)  On top of that when I try to run the server pubishing on JBOSS, start does'nt server and responds to error. If the das_id_generator table exists in DB for all 4 patterns.

  16:09:41, 082 INFO [ScreenLog] with logging of external for debug messages and trace kernel to avoid hidden kernel logging information. Set the property /atg/dynamo/service/logging/ScreenLog.useInfoForDebug to false nucleus to use external instead trace and debug logging.

  16:09:41, 199 INFO [Version] HV000001: Hibernate Validator 4.3.1.Final

  16:09:41, 748 Truncating WARN [ClusterBroadcaster] serviceProperties "commandLineModules" key value

  16:09:42, size INFO [STDOUT] 345 (ERR_QUERY_TABLE, das_id_generator

  16:09:42, 351 ERROR [IdGenerator]

  CAUGHT AT:

  Container: ATG.service.IdGen.IdGeneratorException; Source: Container: ATG.service.IdGen.IdGeneratorException: Cannot query the table 'das_id_generator '. Please make sure that the table exists and is accessible before you start this service. ; Source: Java.Sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist

  at atg.service.idgen.PersistentIdGenerator.initialize(PersistentIdGenerator.java:389)

  at atg.service.idgen.AbstractSequentialIdGenerator.doStartService(AbstractSequentialIdGenerator.java:643)

  at atg.nucleus.GenericService.startService(GenericService.java:561)

  at atg.nucleus.NucleusNameResolver.startService(NucleusNameResolver.java:1726)

  at atg.nucleus.NucleusNameResolver.configureAndStartService(NucleusNameResolver.java:1397)

  at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:928)

  at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:667)

  at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:648)

  at atg.nucleus.NucleusNameResolver.resolveName(NucleusNameResolver.java:493)

  at atg.nucleus.ConfigurationRef.getValue(ConfigurationRef.java:119)

  at atg.nucleus.SimpleComponentState.setBeanProperty(SimpleComponentState.java:403)

  at atg.nucleus.SimpleConfigurationState.saveToBean(SimpleConfigurationState.java:240)

  at atg.nucleus.SimpleConfigurationState.configureBean(SimpleConfigurationState.java:263)

  at atg.nucleus.BeanConfigurator.configureBean(BeanConfigurator.java:297)

  at atg.nucleus.PropertyConfiguration.configureService(PropertyConfiguration.java:984)

  at atg.nucleus.SingleNucleusConfigurator.configureService(SingleNucleusConfigurator.java:84)

  at atg.nucleus.NucleusNameResolver.configureService(NucleusNameResolver.java:1643)

  at atg.nucleus.NucleusNameResolver.configureAndStartService(NucleusNameResolver.java:1368)

  ........................

  ........................

  ........................

  An early response would be really useful because we have demo in 10 days.

  Kind regards

  Ben Milot

  Thank you for this comment.

  I had created a fresh scheme for publication but the jboss was still pointing to the old.

  I've updated this pointers in file @ /server/ atg atg - ds - ds.xml. Worked like a charm!

  If 2nd EDITION solved.

  
  

  The QUESTION 1 depended on question 2. Once I ran publishing and completed the full deployment on ICC, 1st edition got resolved.

  Thanks to shaik and Grando

  Kind regards

  Ben Milot

• How to clear the search query result set

  I dropped a search with the table query. When I search a value it is the display of the result, but when I click on the reset button, only the query Panel is reset to zero and not the table. What can I do to reset the table component associated with the query?

  When I click on the reset button, only the query panel goes to zero and no table.

  It will be reset nt table.

  What can I do to reset the table component

  Use of the component range reset. to do so.

  http://jobinesh.blogspot.in/2009/10/reset-content-of-Web-page.html
  http://myadfnotebook.blogspot.in/2011/05/making-reset-button-in-afquery.html trickles you want
  http://andrejusb.blogspot.in/2009/09/programmatical-reset-for-query-results.html

  -edited lately

  Published by: ADF7 on February 22, 2012 12:58 AM

• The query results display help

  Hello

  I'm having a problem with the display of the results of my query result.

  When I cfloop on the results... the part number was released on 3 different ranks... when I want it on a single line, querying multiple tables... and you cannot use the option to group with the cfloop

  This is the query

  <cfquery datasource="wire" name="testss3">
     SELECT a.part AS pparts, a.wireid AS wireidA, a.strnds, a.wt, a.sps1, a.sps2, a.sps3, a.tin, b.slookup AS lid, b.wireid AS wireidB, b.reelid AS reelnmbr, d.reelid AS rlid, d.rname, d.rsku, d.rcost, e.plookupid, e.prctid, e.wireid AS wireidE, f.prctid, f.percentage, g.rsize
     FROM Mpart a, slookupt b, reeltbl d, prctlup e, prct f, spoolsize g
     WHERE a.wireid = b.wireid AND e.prctid = f.prctid AND a.wireid = e.wireid AND b.reelid = d.reelid AND g.spoolSizeid = b.spoolSizeid
     </cfquery>
  <table border="1" border="1">
   <tr>
          <td></td>
          <td bgcolor="#CCCCCC" class="style23">Part No.  </td>
          <td bgcolor="#CCCCCC" class="style23">Wt./Mft.</td>
          <td bgcolor="#CCCCCC" class="style23" colspan="3">Spool Sizes (Cost/ft.)</td>
          <td> </td>
        </tr>
                
     <cfloop query="testss3"><cfoutput>
       <tr>
          <td></td>
             <td align="left" class="style23">#pparts# @</td>
              <td align="left" class="style23">#wt#</td>
             <td align="left" class="style23">
              #rsize# #rcost#  #wireidA#</cfoutput></cfloop></td>
          <td> </td>
         </tr>       
  </table>
  

  	Reference No..	M/m/Mft.	Sizes in stock waiting (cost/pi)
  	ground 10 @.	31.43	1000 2.8000 1
  	ground 10 @.	31.43	2500 5.9800 1
  	ground 10 @.	31.43	5000 7.3000 1
  	400A	31.43	1000 2,8000 2
  	400A	31.43	2500 5,9800 2
  	400A	31.43	5000 7,3000 2
  	8 ground @.	50	500 2,8000 4
  	8 ground @.	50	1000 5,9800 4
  	8 ground @.	50	5000 7,3000 4
  	8 T @.	50	500 2,8000 5
  	8 T @.	50	1000 5,9800 5
  	8 T @.	50	5000 7,3000 5

  the first line should read 10 ground | 31.43. 1000 | 2500 | 5000

  rank 10 t | 31.43. 1000 | 2500 | 5000

  Any help would be appreciated!

  Thank you!

  You must nest CFOUTPUT tags to use the way you want.  One

  outside the loop to get the 'line after line only' and an inner to get all the

  subdetails in this line:

  roughly

• Refresh table-form query on table only for pages in .jsff

  I have a group being generated as a presentation of table form. I would like for the page of the table to always refresh, and submit the form to refresh page after.
  I saw a thread about how to do this on a .jspx page: Refresh table-form query on table only
  
  Unfortunately, this does not work for me because I use the .jsff pages and they do not have access to the facesContext. Does anyone know how to do this for a .jsff page?
  
  Thank you
  Michelle

  Michelle,

  The taskflow 11 ADF in the equivalent of the region of this expression would be

  #{jhsPageChanged and controllerContext.currentViewPort.viewId=='/MyGroupTaskFlow/MyGroupTable'}

  Unfortunately, this currently does not work because there is an error in the JhsNavigationHandlerImpl class we're going to fix in the next release.
  You can apply a work around by creating a subclass of JhsNavigationHandler and replace as follows:

  ' public Sub handleNavigation (FacesContext facesContext, string action,
  The string result)
  {
  String oldPageFragmentId = ControllerContext.getInstance () .getCurrentViewPort () .getViewId ();
  super.handleNavigation (facesContext, action, result);
  String newPageFragmentId = ControllerContext.getInstance () .getCurrentViewPort () .getViewId ();
  If (! oldPageFragmentId.equals (newPageFragmentId))
  {
  JsfUtils.storeOnRequest (JHS_PAGE_CHANGED, Boolean.TRUE);
  }
  }

  To use your subclass, create a custom template for the facesConfig.vm and modify the navigation Manager to use your subclass.

  Steven Davelaar,
  JHeadstart team.