the query results to table 2d
I have a list created dynamically IDs I want to query a tablefor matching records for one of the IDs. I can run a loop of the list
the query, but what is the best way to put all of the matching records
each individual ID into a single statement of output? I question 7
different columns, so if I use a table it would need to be 2
dimensional and I do not know how to write the results of the query to a 2d
table. Or y at - it an easier way for the release of all data without
put in a picture at all?
Here is the corresponding code so far:
Change your code to the attachment to start (no loops!):
Tags: ColdFusion
Similar Questions
-
How to get SQL Developer 4.1 to display the query result?
SQL DEV 4.0.3.16.84 execution of a SELECT statement is stored in a .sql file causes the window of the query result of pop-up indicating the result of a SELECT statement. SQL DEV 4.1 is not to do so.
Oops on my part; my SQL formatting has been the root cause. I got used to insert split without any character of comment lines in front of them. For example:
==================================================
Select funny business;
The foregoing indicates the behavior described.
--==================================================
Select funny business;
With the dash double comment shows, the SQL works very well.
This is different than previous versions of SQL Developer, but is probably better functionality. I'll try to mark it as answered, but anyone with the admin should certainly do so if I can't.
-
Need help to understand the query result
Hi gurus
I was reading one of the question here in this forum and its link is below:
I had some confusion related to this code and don't understand the logic of the out put, see query below:
Query
with sub_services as
(
Select su_seq 12323, 'HLR1' so_id, 1 seq Union double all the
Select su_seq 12323, "HLR2' so_id, seq 2 Union double all the
Select su_seq 12323, "A09" so_id, seq 3 of all the double union
Select su_seq 12333, "MO1" so_id, seq 4 Union double all the
Select su_seq 12333, "MO2' so_id, seq 5 Union double all the
Select su_seq 12333, "A09" so_id, 6 seq in union double all the
Select su_seq 12333, 'M0CR' so_id, seq 7 Union double all the
Select su_seq 12999, "LOL1' so_id, seq 8 Union double all the
Select su_seq 12999, "LOL2' so_id, seq 9 double
)
Select *.
of sub_services b
where exists (select 1 from sub_services
where su_seq = b.su_seq
and so_id = 'A09.
)
order by 2;
The query result
12323 A09 3
12333 6 A09
12323 HLR1 1
12323 HLR2 2
12333 M0CR 7
12333 4 MO1
12333 5 MO2
According to my understanding, the above query should return records in red only because of her is below command
It exists (select 1 from sub_services
where su_seq = b.su_seq
and so_id = 'A09.
but don't know why he's back 7 files, can someone help me understand the result...
It is query is functionally identical to the PL/SQL block, but much more effective.
declare
number of l_res;
Start
for line (select *)
sub_services) loop
Start
Select 1 from l_res
of sub_services
where su_seq = row.su_seq and
so_id = "A09" and
rownum = 1;
Essentially every row in the outer query are tested against him exists query. Given the correlation between two requests is based only on su_seq each line with a su_seq value returned by him is returned in the output.
Another way to think he uses instead a join condition. This query is equivalent to the query to exist
Select the main
of main sub_services
Join select (separate su_seq
of sub_services
where so_id = "A09") cond
We main.su_seq = cond.su_seq;
John
-
new to 4.02, no grid or column names in the query results
It is a bit strange, I have SQL Developer 4.02 just installed, and I don't see grid or column names in the query results. Don't see anything useful in tools > Preferences, what don't get me?
The worksheet gives you a couple of different ways to run a query...
1. instruction execute sheet icon toolbar (large green arrow, or Ctrl + Enter).
This produces a results tab of the query with the data displayed in a grid.
2. worksheet icon toolbar Execute the Script (the small tip of the green arrow on lined paper, or F5).
This produces a tab out of the Script with the data displayed on the printer.
If execution of the statement to Execute the Script, using some SQL * most orders will remove the column headers:
1. set the position
2. set the pagesize 0 (or 1 or 2).
Pagesize and linesize default is - 1. By default, the spreadsheet is free for formatting output script as he wishes. If you have not changed these settings in the spreadsheet, then see if you point to a startup script in Tools > Preferences > Database > name of the connection startup script file
Kind regards
Gary
SQL DeveloperTeam
-
The query results: extract all lines?
I was looking for a feature that will allow me to choose to return "all records" in the query results window. The current behavior is fetching 50 files at a time (for example fetch 50 records when you scroll the results = s-l-o-w). What I would do, that is 'Recover all lines' and then use for the scroll bar to scroll "smoothly" to the last record. For example, the 8.0.6 Query Builder version has this feature and SQL Developer 3.0, if I right click on the results. I choose 'Count lines... ". ", looks like it would be a perfect place to put an option"retrieve all rows.If your application is to be able to quickly reach the last record in a query you can press Ctrl + Page Down (with emphasis in the grid of results) and you will automatically position your view to the last record in the query automatically go get all the results in the process.
You have no need to do anything with the mouse scroll is actually the fastest way to reach the desired line.
-
Hi Experts,
I have a DB table has columns of more than 50.
I question this table, it should only return one line at any time. as sqldeveloper below image.
here, I need to build block pl/sql-query, Discover the column in the table as a key and query result as values.
Eg: Key - Value
TASK_EVENT_ID - 1765
EVENT_TYPE - ASR_UPDATE
... etc until all of the columns in my table.
Experts please comment on that point, appreciate your help on this.
Thank you
-Vincent.
Here is an approach using DBMS_SQL to iterate over the columns of key / value to assign... (Little code snipped for brevity)
create or replace procedure (task_expired)
v_store_id in full,
v_task_action_id in full,
v_job_id in full
)
as
-[SNIP code...]
v_sql VARCHAR2 (4000): = ' select * from my_table where PK = 123'; -Your SQL here!
v_v_val VARCHAR2 (4000);
v_n_val NUMBER;
v_d_val DATE;
v_ret NUMBER;
c NUMBER;
d NUMBER;
col_cnt INTEGER.
f BOOLEAN;
rec_tab DBMS_SQL. DESC_TAB;
col_num NUMBER;
vAsString VARCHAR2 (4000);
BEGIN
-[SNIP code...]
Message_properties. CORRELATION: = "EDF_EVENT";
MSG: = SYS. AQ$ _JMS_BYTES_MESSAGE. Construct();
Msg.set_string_property ('queueName', ' shipping/csi_cth');
Msg.set_string_property ('MODE', 'CR8');
c: = DBMS_SQL. OPEN_CURSOR;
DBMS_SQL. PARSE (c, v_sql, DBMS_SQL. NATIVE);
d: = DBMS_SQL. Execute (c);
DBMS_SQL. DESCRIBE_COLUMNS (c, col_cnt, rec_tab);
1.col_cnt J
LOOP
CASE rec_tab (j) .col_type
WHEN 2 THEN
DBMS_SQL. DEFINE_COLUMN (c, j, v_n_val); -Number
WHEN 12 CAN
DBMS_SQL. DEFINE_COLUMN (c, j, v_d_val); -Date
ON THE OTHER
DBMS_SQL. DEFINE_COLUMN (c, j, v_v_val, 2000); -Else treat as varchar2
END CASE;
END LOOP;
LOOP
v_ret: = DBMS_SQL. FETCH_ROWS (c);
WHEN OUTPUT v_ret = 0;
1.col_cnt J
LOOP
-Fetch each column to the correct data type based on coltype
CASE rec_tab (j) .col_type
WHEN 2 THEN
DBMS_SQL. COLUMN_VALUE (c, j, v_n_val);
vAsString: = to_char (v_n_val);
WHEN 12 CAN
DBMS_SQL. COLUMN_VALUE (c, j, v_d_val);
vAsString: = to_char (v_d_val, ' DD/MM/YYYY HH24:MI:SS');
ON THE OTHER
DBMS_SQL. COLUMN_VALUE (c, j, v_v_val);
vAsString: = v_v_val;
END CASE;
Msg.set_string_property (rec_tab (j) .col_name, vAsString);
END LOOP;
END LOOP;
DBMS_SQL. CLOSE_CURSOR (c);
DBMS_AQ. ENQUEUE (queue_name-online 'cbus.aqjms_common',
Enqueue_options => Enqueue_options,
Message_properties => Message_properties,
Payload-online msg,
Msgid => Message_handle);
dbms_output.put_line ('00 Msgid =' |) Message_handle);
dbms_output.put_line('===Done=');
-[SNIP code...]
END;
/
-
Effect of an additional table in the FROM clause in the query results?
I recently helped a colleague debug one of their SQL statements
The output was showing some very unexpected totals, and I was able to shrink down to an additional table in the FROM clause, but not used anywhere else in the application.
Thus, for example
SELECT A.ID, B.CODE
Of
EMPLOYEE,
B OF THE STATUTE,
PAY THE SAL
WHERE A.ID = B.ID
AND
A.ID = 1;
I was wondering, how can an extra table in a FROM clause influence directly on the rest of the query?
The query above is just an example of what I've seen, the my co worker was working on is a bit larger and a lot more code to read. I noticed that when I added/removed the extra table in my query to co workers and then it worked as expected.
I always thought that an additional table is not attached to what anyone would be just to do the inefficient code, but does not affect outputjust do the inefficient code
Yes, that too, you will get a Cartesian product by calling is not the entries in the where clause for this table 'disappeared' :(
-
Unable to produce the query results
Hi all
Hello. I'm aunable write a query that can produce reuls froe below question. An account can have several part relationship.
Here is the data for the x table
PartyID - AcctNo - indicator - RoleCode
1111 ----- 123 ------ Y ------- 110
1112 ------- 123 ------ N --------- 120
1113 ------ 123 ------ N -------- 130
1114 ------- 124 ----- N -------- 100
1115 -------- 124 ------- N --------- 110
1116 --------- 124 ---- N --------- 100
1115 -------- 125 Y ------- 100
1116 ------- 125 N ------ 110
1117 ------- 126 Y ----- 100
Query should return these AcctNo is not any indicator = 'Y' and RoleCode did not have 100. In this case the results should be
AcctNo
123
124
Thanks in advance
Don
Hello
885137 wrote:
Hi, Frank, here is creation and insertion of table scripts. ...
Thank you.
So what's the problem with the query I posted in response #1? (You must use the correct name of the table, of course). Specify where he makes incorrect results and explain why these results are false.
-
The query results display help
Hello
I'm having a problem with the display of the results of my query result.
When I cfloop on the results... the part number was released on 3 different ranks... when I want it on a single line, querying multiple tables... and you cannot use the option to group with the cfloop
This is the query
<cfquery datasource="wire" name="testss3"> SELECT a.part AS pparts, a.wireid AS wireidA, a.strnds, a.wt, a.sps1, a.sps2, a.sps3, a.tin, b.slookup AS lid, b.wireid AS wireidB, b.reelid AS reelnmbr, d.reelid AS rlid, d.rname, d.rsku, d.rcost, e.plookupid, e.prctid, e.wireid AS wireidE, f.prctid, f.percentage, g.rsize FROM Mpart a, slookupt b, reeltbl d, prctlup e, prct f, spoolsize g WHERE a.wireid = b.wireid AND e.prctid = f.prctid AND a.wireid = e.wireid AND b.reelid = d.reelid AND g.spoolSizeid = b.spoolSizeid </cfquery> <table border="1" border="1"> <tr> <td></td> <td bgcolor="#CCCCCC" class="style23">Part No. </td> <td bgcolor="#CCCCCC" class="style23">Wt./Mft.</td> <td bgcolor="#CCCCCC" class="style23" colspan="3">Spool Sizes (Cost/ft.)</td> <td> </td> </tr> <cfloop query="testss3"><cfoutput> <tr> <td></td> <td align="left" class="style23">#pparts# @</td> <td align="left" class="style23">#wt#</td> <td align="left" class="style23"> #rsize# #rcost# #wireidA#</cfoutput></cfloop></td> <td> </td> </tr> </table>
Reference No.. M/m/Mft. Sizes in stock waiting (cost/pi) ground 10 @. 31.43 1000 2.8000 1 ground 10 @. 31.43 2500 5.9800 1 ground 10 @. 31.43 5000 7.3000 1 400A 31.43 1000 2,8000 2 400A 31.43 2500 5,9800 2 400A 31.43 5000 7,3000 2 8 ground @. 50 500 2,8000 4 8 ground @. 50 1000 5,9800 4 8 ground @. 50 5000 7,3000 4 8 T @. 50 500 2,8000 5 8 T @. 50 1000 5,9800 5 8 T @. 50 5000 7,3000 5 the first line should read 10 ground | 31.43. 1000 | 2500 | 5000
rank 10 t | 31.43. 1000 | 2500 | 5000
Any help would be appreciated!
Thank you!
You must nest CFOUTPUT tags to use the way you want. One
outside the loop to get the 'line after line only' and an inner to get all the
subdetails in this line:
roughly
-
Keep the query results set all paging
I have a query back thouands of records. For do not impact performance display and paging, which would be the best way without use of query caching? Is it possible to keep the first recordset query time she and her use in Exchange?
Load balancing definitely throws a wrinkle by using shared memory. There are ways to address these problems, but they all come with the pros and cons, just basically choose what pros like you and what the disadvantages that you can live with.
I.E. you can use sessions. So when a user first access your application, all future queries are sent to the same server that processes requests for first. But this means that if this server will see, all users currently glued to it are s.o.l.
I saw other people using databases for the persistent memory. But then, you have the LAG involved in obtaining data from the database on every request, although it should be easy fast queries to do this. Side pro, it does not matter which server processes the request.
It would be different then just re - run the original query every time, but rather store the original query results into a temporary table space so that any complexity which may exist should not be repeated.
-
attempts to display the query results in 2 columns
I'm trying to change someone elses existing of code to display the results of a query in 2 columns on a web page.
The result of the existing code can be seen
here
Here is the code I am trying to change
< table width = "95%" border = "0" align = "center" cellpadding = "4" cellspacing = "2" >
< cfoutput query = "News" StartRowOptional = "" #StartRow_News # "LignesMax =" #MaxRows_News #">"
< tr align = "center" class = "TEXTnormal" >
< class nowrap = "style1 TEXTnormal" td >... < table >
< /tr >
< class tr = "TEXTnormal" >
< td > < table width = "100%" border = "0" cellpadding = "0" cellspacing = "0" class = "TEXTnormal" >
< b >
< td > < cfif News.ImageNameThumb gt 0 >
"< a href =" news_view.cfm? recordID = #News.ID #"> < img src =" "uploadedimages / #News.ImageNameThumb #" alt = "#News.ImageCaption #" hspace = "8" hspace = "0" border = "0" align = "left" > < / has >
< cfelse >
< / cfif > < table >
< td > < a href = "" news_view.cfm? recordID = #News.ID # "class ="TEXThighlight"> #News.Title # < /a > - #News.Day #. #News.Month #. #News.Year # < br >"
#News.Summary # < table >
< /tr >
< / table > < table >
< /tr >
< / cfoutput >
< /table >
I changed the above code to
< table width = "95%" border = "0" align = "center" cellpadding = "4" cellspacing = "2" >
< cfset LoopEndRow = CEILING(#EndRow_News#/2) >
< cfloop
index = "row".
from = "#StartRow_News #
to = "#LoopEndRow #
step = "1" >
< class tr = "TEXTnormal" >
< cfset breaker = 0 >
< cfloop
index = "column".
from = '0 '.
to = '2 '.
step = "1" >
< cfoutput query = "News1" StartRowOptional = "" #StartRow_News # "LignesMax =" #MaxRows_News #">"
< td width = "50%" >
< table width = "100%" border = "0" cellpadding = "0" cellspacing = "0" class = "TEXTnormal" >
< b >
< td > < cfif News1.ImageNameThumb gt 0 >
"< a href =" news_view.cfm? recordID = #News1.ID #"> < img src =" "uploadedimages / #News1.ImageNameThumb #" alt = "#News1.ImageCaption #" hspace = "8" hspace = "0" border = "0" align = "left" > < / has >
< cfelse >
< / cfif > < table >
< td > < a href = "" news_view.cfm? recordID = #News1.ID # "class ="TEXThighlight"> #News1.Title # < /a > - #News1.Day #. #News1.Month #. #News1.Year # < br >"
#News1.Summary # < table >
< /tr >
< / table > < table >
< cfset breaker breaker + 1 = >
< cfif breaker EQUAL 2 >
< cfbreak >
< / cfif >
< / cfoutput >
< / cfloop >
< /tr >
< / cfloop >
< /table >
The results of this code change can be see here
as you can see what I did gives the number of columns (2)
and the correct number of lines for the amount of data (3)
However, each line shows the first 2 pieces of data returned by the query
Can I change the output query so that it returns the data SET by the amount of data already out items?
If so, how?
#data #.
closing tags -
I want to the output of the random results of a query and exclude the results to appear twice. What would be a good way to do this?
With the help of lists with ListFind and delete list points once they are used?
Tables?
It sounds like this might work
http://weblog.vb-tech.com/Nick/Archive/2005/03/25/608.aspx -
[Help] Join the query from 3 tables
Hi, I'm new to database. I have a question about joining 3 tables, forgive me for my bad English.
My paintings look like this
Table 1: person (id, firstname, lastname)
Table 2: AssignPersonAddress (id, personid, addressid, type)
Table 3: address (id, phone, street, etc.)
I need AssignPersonAddress table, because in my data structure, a person may have more than 1 address and address type must be registered (for example: private, work)
I want to do a select query to the State any person with his private phone and work phone, like this.
NOBODY | PRIVATE | WORK
Right now my query looks like this
the problem is that I only get the person who has a private address and the job. But what I want is all anyone no matter if the person has only 1 or 2 address.select p.name , a1.tel AS Private, a2.tel AS Work from person p, addresse a1 , AssignPersonAddress apd1, AssignPersonAddress apd2, addresse a2 where p.id = apd1.person (+) and apd1.adresse = a1.id and apd1.art = 'Private' and p.objectid = apd2.person (+) and apd2.adresse = a2.id and apd2.art = 'Work'
As you can see I put the left outer join in where condition, but I always get the wrong result.
THX in advance
Danny
Published by: raitodn on October 1st, 2009 03:51
Published by: raitodn on October 1st, 2009 04:12
-
How can I set the default value of a selection in the Query Panel with table.
Hi Experts,
JDev 12.1.3.0.0
I have a view Criteria (contains a attribute with LOV). and the named criteria is dragged as a query with Table Panel.
In the user interface, the LOV is now visible in the query Panel. Suppose that the LOV has 3 values: 'Manual', 'Other' and 'portfolio '.
How can I set a default value for the choice of a select. ?
Thank you
Roy
refer to:
Andrejus Baranovskis Blog: Dynamic value by default for the field in query ADF search
but rather to express as in the bellows of the image, choose literal and let 2
-
Hi all
I write the query to the output of the Parent and the child's relationship and would need assistance. Would like to ask someone to help out me.
I have a table like
create the table par_chd
(
parent_id number (10),
child_id number (10)
);
Who has data like
SQL > select * from par_chd;
PARENT_ID, CHILD_ID
----------- -----------
1001 1011
1001-1021
1001 1031
1001-1041
1021 10210
1031 10310
6 selected lines
I would like to have output as
PARENT_ID CHILD_LEVEL_1 CHILD_LEVEL_2
---------- ------------- -------------
1001 1011
1001-1021-10210
1001-1021
1001 1031 10310
1001 1031
1001-1041
1001
7 selected lines
Thanks in advance
Saaz
Hi Saaz,
Minor adjustment to the script of Moazzam (who made 99% of employment):
SELECT
connect_by_root (parent_id),
CASE
WHEN LEVEL = 1 THEN child_id
WHEN LEVEL = 2 THEN PREVIOUSLY child_id
OTHER prerequisite parent_id
END CHILD_LEVEL_1
CASE
WHEN LEVEL = 2 THEN child_id
ANOTHER PREREQUISITE Child_id
END CHILD_LEVEL_2
CASE
WHEN LEVEL = 3 THEN child_id
END CHILD_LEVEL_3
OF par_chd
START WITH parent_id = 1001
CONNECT BY parent_id = child_id PRIOR
UNION ALL
SELECT 1001, NULL, NULL, NULL FROM DUAL;
Maybe you are looking for
-
Photos of the external drive on my Mac hard drive
I transferred my Photos App with all my photos on an external drive to create a space. I upgraded my mac pro internal end 2013 SSD and have plenty of space and want to reinstall my pictures from my external hard drive on my disk hard mac . How can I
-
Cannot start "Printer Assistant" Officejet Pro 8600
The Printer Wizard and my 8600 worked well for over a year. Now, I can't start "printer Assistant". This may have been triggered by an 8.1 Win update. Others on the Discussion Board have said to uninstall all programs, HP, reboot and then download
-
We have a medically certified application that uses the Cisco C90 via its API and Telnet. The question we have is that this specific application is referred to the local address book and not the address book of companies that is replicated through th
-
Deactivation of the charms and green screen on videos
I have a laptop HP running Windows 8. I followed the instructions on how to disable scrolling of the corner and the deactivation of the charms, but I still get the sidebar on the right/charms. Also, I can watch a few videos online, then no reason th
-
Aaaagh! I followed to the letter F/book instructions for adding a button "I like" - copied the js then the HTML generated by them and pasted in the correct position, literally nothing happens.Someone had a similar problem to all?Thank you, Jon