Question of Toshiba AT10-r: charging: mini-usb connector port is broken

Similar Questions

• Sansa Clip + Question of burden (with mini USB cell phone charger)

  I have a few questions about the issue of workload:

  • is it acceptable to fresh clip + use the charger of mobile phone with mini USB socket (5v ~ 700mA), as I know, USB 2.0 specification is 5v ~ 500mA?
  • Sansa is equipped with a circuit to handle the charging process, for example the the blackout when the battery is fully charged?
  • After that several hours connected to the computer, the turn display self... is this normal? (so I have to press a button to see the screen saver and check the State of charge)

  Thanks for the answer of my question... hehhe

  You can use any charger, but be sure that it is 5V and not higher than (above will FRY your Clip).  Around 350 my and especially (even if some 500 my and above is best) is very well - the Clip will use the amperage he needs.

  Yep, you can disable the data pins and everything should be ok.  Just be sure you know what you're doing on the pins.  Many people say to be able to arrive at the same end simply by inserting the USB cable into the computer, not completely or by covering the data pins.  In addition, you can buy USB charge cables only - I have a couple of people.

  Note that when you connect to your computer, you can still read the Clip files, via the computer itself (not the music) and media playing software that is pointed and play the songs on the Clip.

• iPad ceased after updating ios 10 charging by USB keyboard

  Howdy,

  Updated my devices mobile iOS 10 yesterday and the only weird thing I've noticed so far is that my Pro 9.7 "iPad is cooler through the USB port on my Apple keyboard. It will charge if I plug it directly into the back of my computer.

  Restarted both devices, same problem.

  Of course, this isn't just a gene or the death and life, but I thought that I post to see if anyone has faced the same question.

  I use a 27 ", end of 2012 iMac OS X Yosemite 10.10.5 (14F1912) running.

  I've seen other people reporting similar problems. It is possible that 10 changed the minimum power level of acceptable entry for the iPad.

  Frankly, as someone who has had one for years, ipads charge via USB are problamatic at best. Most iPads want at least 10W of power and, unless it is a USB high power, they put out only 5. That may work for a phone or ipod but not an iPad.

  Even though it says do not load it is possible that your ipad is always get a trickle charge, but I think using a different port is the best solution for you - beyond using the supplied adapter and it loads wall. That's how I charge mine. I used USB charge as a "oh fudge, I need power and have nothing to use" sort of thing. (Aka last resort)

• Red question mark on the desktop for inadmissible USB Ext HD icon

  My new WD 1 t ext HD works on other computers.  On mine, after downloading an update of windows XP is no longer is recognized.  Works fine before that for backup, etc. After update of windows, the desktop icon remains, but there is a red question mark on it.  I can't find the drive letter or device in my computer and other suggested methods. The power supply to the hard drive light stays on. But restarting, restoring the system, change the location of the usb connector, plug the cables all tried without success.  Sometimes it is his own. Not lately.

  By trial and error, discovered what is not clearly described elsewhere.

  Windows Update is the culprit. Proven by repeating its use.

  But there is something to "unplug" and "reconnect" the HD position to have your PC "recognize" after the problem occurs.

  All the following must be done AFTER PC IS SHUT DOWN:

  1. Remove and reconnect the power cord HD

  2. Remove and then reconnect the USB cable to the HD connector.

  3. pull out and then plug the other end of the USB cable to a USB port.

  THEN RESTART your PC.

  MS should explain that more clearly - and should recognize this problem of Windows Update.

  From my experience, Windows Update causes many problems still unrecognized in XP SP3 and possibly other versions of Windows.

  Only hope it helps others in the meantime.

• Mini-usb port doesn' work

  I have connected a mobile hard disk on my z3 xperia mini usb port, and I could not get information from the HARD drive. The problem is that now the mobile charger does not work in this port. Could someone help me?

  I do not think that disk hard work with the OTG. Since the hard drive requires more energy than dongles standard usb. try to reboot your device and then reload by using a wall charger.

• Why all the mini-usb Chargers don't work with my pre! Grumble, boo-hiss...

  I forgot to take my charger with me for what was supposed to be a quick trip.  After many postponements, flights cancelled, calls for the family and a 'help' of the airline office... I noticed that my battery was low so I decided to buy a charger at the airport.

  Here comes my problem with my Pre and Palm...

  1st stop, I have overall love this phone and understand that a new version can not have all the features I want/need.

  What I don't understand, is why any mini-USB charger does not work!

  I visited a few shops and kiosks where NONE of the generic Chargers would work and they did not offer Palm products.

  I've certainly limited technical knowledge these things here, but can someone please explain to me why there are standards (USB, Mini-USB, etc.) but Palm makes their mini-usb special requirements or unique so only some products work?

  I have used several brands and everybody has worked so far for me. I have even a mini - mic adapter that adapts to any standard mini-usb and works fine.

  Just to clarify, you said you have mini-usb, the pre uses micro usb.

  Micro-usb is also going to be the standard.

  http://www.Engadget.com/2009/02/17/GSM-Association-sets-2012-target-date-for-universal-cellphone-ch/

  Message edited by tagz on 09/30/2009 15:48

• iPhone 5 c will not charge via USB on the laptop?

  Hi all.

  I have an iPhone 5 c and as about a week ago, does not charge via the USB port on my laptop. He sees very well in my wall sockets and Sockets USB as well, but not in my laptop. I have an Acer laptop running Windows 7. Windows is up to date, iTunes has the latest version installed. Whenever I plug in my phone, one of the following conditions occurs:

  (1) does not have

  (2) noise "plugged" USB lights, the window on the lower right, tell that a USB device has malfunctioned

  (3) (rarely) of phone calls after I tried several things

  What happened is I would plug my phone, she would charge via USB, iTunes opens automatically, and "trust to this computer" popup would come on my phone if I had unlocked it. None of this is happening now. I did the following to try to remedy:

  (1) power cord iPhone replaced (it was time for a new anyway)

  (2) uninstalled and reinstalled iTunes

  (3) restart computer and phone probably 29856 times

  (4) device Manager... nothing comes up at all, not even the unknown device. RARELY the unknown device comes up, then I get a "Code 10: this device cannot start" error, but it is * in a handbasket just trying to get to THIS point! and IF I do what they say to do to correct a code 10 (uninstall all USB and restart the computer, then USB devices hook to the top one at a time), so I'm now at my problem of a communication that don't meet pluse between my phone and PC

  5) tried to the registry editor, but not "upper filters" option rises

  (6) virtually every other option on this thread of 5 pages iphone not recognized by Windows 7

  Help, please?

  The USB port of your laptop does not provide sufficient power to recharge the phone. It is a hardware problem with your laptop, not the phone.

• Toshiba AT10-A-104 - no support of move to the SD card

  Hello
  I have a TOSHIBA AT10-A-104 Android version 4.1.2
  The undeliverable problem APP / GAMES MOVE TO SD card.

  I want to upgrade to Android version 4.4.2 or another grinding media.

  Please help with the upgrade.
  Thank you
  Sharon.
  [email protected]

  Unfortunately... cannot install another version of Android firmware at your own hand.
  The update can be done only via Toshiba Service Station. Of course, if they are available.

• Toshiba 3.5 "3 TB USB 3 to HDD - unable to create partition using Mac OS

  Hi guys,.

  I just bought a Toshiba Canvio 3 TB (HDWC130EK3J1) to be used as external for my iMac.
  I can see the well 3 TB drive, but I can't make any partition system native Mac OS journaled.

  When I try, I get an error message.

  Any help or ideas?

  Thank you

  Hello

  To my knowledge the Toshiba 3.5 "3 TB USB 3 to HARD drive supports the file format NTFS (for the support of the Windows system).

  I guess you must re - format the HARD drive to the system of files HFS + for Mac compatibility

  Your comments would be appreciated

• Mini USB wireless n300 adapter does not detect

  I am trying to reinstall my Adapter Mini USB wireless N300 and when he tries to detect the adapter that does nothing. (Just says: detection of adapter). I have Windows 10.
  I'm so sick of this.

  Hi OceanEyeZzz,

  Use this driver for Windows 10.

  http://KB.NETGEAR.com/app/answers/detail/A_ID/30154?CID=wmt_netgear_organic

  JamesGL

  The community team

• Xoom no charge through USB port

  Hi, starting at the group. A few days ago, I discovered that my Xoom suddenly stopped charging via USB or with the dock to the computer. The cord still works at this stage.

  Computer USB is fine, can interact with the multimedia device, add/remove without problem

  Details to follow, I did a static discharge the Tablet one or twice during the last two weeks and I wonder if there is some kind of a security protocol so that the unit load?

  Model - MZ604

  Android version - version 4.0.3

  Config of the firmware

  GAS_NA_HUBBLEWIFICANADA_P009

  GAS_NA_HUBBLEWIFICANADA_A020

  GAS_NA_HUBBLEWIFICANADA_M002

  Kernel - 2.6.39.4 - 0008-gca76b51

  a22916@il93nxdroid47 #1

  Build - 1.7.1 - 34

  Do you have a solution for this?

  Best

  A

• 12 switch can charge via USB 3.1?

  12 switch can be charged via USB 3.1?  Some descriptions are vague and all the answers I've found are for previous models.  It would be nice to have a not-so-awkward option for charging on the go.

  No, the power adapter is 19V 45W, the USB port is 5V.

• Possible to use 19.5V 1. 2A charger micro usb to load aspire switch 10?

  I have access to a charger micro usb to load another Tablet Windows, it uses 19.5V 1. to load instead of the standard micro usb 5v 2A.

  Anyone know if this could be used to recharge than my aspire switch 10?  Or at least it will damage if I try?

  I'm not really an Acer rep, just a member of the community who has been quite active (and I assume quite OK ) to have obtained the status of Acer Ace. That said, anti-war of the benefits of being an ACE of the Acer is the occasional chance to play with the new machines after they are introduced. I got to play with a Switch 10 for several weeks after their initial introduction...

  The problem with a micro USB charger is that the Switch 10 is not designed to load throough the USB port. take one of the many Chargers 3rd party designed for Switch 10 (and many other models of Acer Tablet).

• HP320 - 1120 m Desktop TS: change USB 2 ports tonUSB 3

  I wait fault to get an external drive which works on USB 3 ports & I don't have USB 2 ports. Can I change from 2 to 3 children? My product number is A5W91AV #ABA.  I have a generic card USB. I don't know what other information you might need.

  HP320 - 1120 m AIO.
  10 Home 64 bit Windows
  Product # A5W91AV #ABA
  CPU: AMD E2 - 3200 APU with graphics Radeon (TM) HD
  Motherboard: Pegatron Corp. 2ACB version 1.03
  BIOS: FRIEND worm: 04.06.04
  Memory: 6 GB
  Wireless network
  465,76 GB Hitachi SATA drive
  NTFS
  BK peripheral backup USB Seagate +.
  HP Officejet Pro 8600 AIO printers
  Series of printers HP Envy 100 D410

  @mkj3757

  I have to admit that I made a mistake somehow.  After reviewing the specifications of your computer again, it seems there are 2: USB 2.0 on the side of the computer and 4 ports: USB 2.0 to the rear ports.

  I shopped an option that might work for you.  I contacted StarTech to see if they had any ideas.  This is the only option they could offer:

  http://www.StarTech.com/cards-adapters/USB-3.0/cards/2-port-mini-PCI-Express-USB-3-adapter-card-with-bracket-Kit~MPEXUSB3S22B

  It's a long shot, but if the cable can be routed off the case someway, it could possibly work.  You can communicate with them with to get help.

• Device USB 4 ports carrefour brand

  Hello

  I buy a cable USB 4 ports of CARREFOUR ref brand: BUH854 and when I install it I can't find the driver

  can you help me

  Thank you

  Hello

  You asked your question in the English version of the Microsoft Community. Please could you click on the globe icon to the world (change region) at the bottom left of the screen and then choose your preferred language. Now ask you question once again.

  

  If you can't find a suitable language, please go here:

  http://support.Microsoft.com/common/international.aspx

  for other international support options.

  Thank you.