Question of WGA600N

Similar Questions

• WGA600N Wireless N does not connect to the N, G speed only

  I have a WGA600N Wireless-N game adapter and a router WRT160N (v3).   I can't get the adapter for games to connect at speeds of G.    I tried to adjust the adapter for games to use only the N band, but then he used to see even the router at all, it does not detect the network period.    If I have configured the router to N-band only, the same issue happens (though ideally I need in mixed mode for my laptop anyway). I have connected the WGA600N directly through the web interface of the intellectual property and has tried a variety of settings, but no help.  I can clearly see in the State of the adapter of game that it is connected to an 11g-force when the value of mixed mode.    I use WPA encryption if it matters.

  I have the adapter for games within a few feet of the router at this facility, so I don't think it could be a question of signal strength, but unfortunately I do not have another Wireless-N to test against the router.

  Any ideas?

  Just to follow up, I was able to get the speed 11ng use WPA2 AES mode only to work.   This isn't the perfect solution for me because my PSP only supports WPA WPA2 not - however N speed for my consoles wireless is more important, so I'll just have to manually change my router settings any time I want to connect any WPA or less peripheral encryption online.   Not perfect, but better than nothing solution.

• WGA600N and uTorrent... capped at 200 Kbps?

  I recently installed the WGA600N and hooked up through my card pci ethernet (gigabit capable), and everything looks good except for downloading via bittorrent.  It is connected to a DIR-825 in the 5 GHz range to N only.  The DIR-825 related forces signal about 70 to 75% and a rate of 270 to 300 Mbps.  However, in the connection network icon in the right sidebar below shows speed: 100.0 Mbps.  Not sure why this will not jump above 100 Mbps with the ethernet card compatible gigabit and forces signal strong enough?  With all that being said... If I upload a file via the web/firefox I can hit speeds of up to about 600 Kbps... BUT, if I run a bittorrent via uTorrent I out cap to a max of 200 kbps download speed.

  Am I missing a setting on the WGA600N?  Why would I capped at 200 kbps download via a bittorrent client speeds?  In addition, all the drivers are updated, my port is open, and I was able to reach speeds of 600 Kbps in uTorrent via another D-Link N adapter, so I know that's not my internet connection (Fios).

  Thanks in advance for any help!

  I solved this problem.  My connection speed of global download in uTorrent preferences has been somehow set to 200 Kbps max.  So my question has nothing to do with the WGA600N.  Sorry for the waste of space here.

• The WGA600N can switch between 2 channels?

  I hope that I am not on something, but I can't find an answer to my question.

  I have the WRT610N simultaneous dual band router paired with a WGA600N wireless dual-band adapter.

  With the router, I set myself to 2.4 and 5 GHz channels separate SSID and WPA2 encryption keys.  My adapter, although it can 'see' the two networks, connect only to one. On the product for the WGA600N support page, it says clearly, "dynamically travel channels and wireless networks based on the quality of the actual signal and a link for maximum availability and reliability of connection."

  My question is... How can I activate my game card work on the 2.4 and 5 GHz channels to find the best connection?  It seems in the WGA600N Setup, it makes me choose a channel.  Both channels on my router must be on the same SSID and the same encryption key for the adapter to switch back?  Should I switch to WEP mode?

  On your Linksys card, only a single frequency could serve both (2.4 GHz or 5 GHz), although it could pass the frequency... Access your game card and go to the Wireless tab on the Basic tab, select 802.11 2.4 GHz and 5 GHz band... 802.11 mode should be mixed 802.11na, 802. 11A, 802.11ng, 802.11 g, 802. 11 b, let the rate of automatic transmission and channel width should be 20/40 MHz...

  Be sure to set the security WPA (not WEP/WPA2) wireless...

• iOS 10 people record problem/question

  Hello

  I have a couple of "faces" in the issue of people who are coming in white, but acknowledged same 'face' of many times.  Is anyway to update it for photo comes actually?  At a few faces, I don't know that facial recognition found since it is coming from white.

  Hi JohnP007,

  Congratulations on your iPhone 7 more running iOS 10! I understand that some of your faces in the album of people pull up as a draft and you want to refresh. You can try to use the steps below to fix the faces on the thumbnails in albums.
  

  Difficulty faces and names mixed-up

  If you notice that there is a photo of someone in a collection that is poorly identified, you can remove it.

  1. Tap the person you want to remove in the album of people > select.
  2. Type Show done face to emphasize his face in every photo.
  3. Press on each photo that is not the person.
  4. Type > not this person.

  Hide people

  You can hide the people or groups that you don't want in your album of people.

  1. Open the album people and press Select.
  2. Touch the people you don't want to see.
  3. Click Hide.

  If you want to see the people that you have hidden, press on show hidden people.

  People in the Photos on your iPhone, iPad or iPod touch

  This should be corrected without delay faces. Please use the Apple Support communities to post your question. Good day.

• Questions - and answers forgotten

  How to get my 'secret' answers to the questions that I have noted the way back when?

  If you forgot the answers to your questions of security of Apple ID - Apple Support

• I can't reset the security questions. We received notice as below:

  Hello world

  I can't reset the security questions. We received notice as below:

  "Cannot reset Security Questions."

  We have insufficient information to reset your security questions. "

  Please help me as soon as possible! Thank you very much.

  Hello

  You will need to contact the Apple Support.

  The information is available here:

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

  (I'm afraid that no one here can solve the problem for you - this is a user-based community).

• Question of cloning for SSD upgrade on 12 Macbook Pro

  Previously, I did an upgrade to SSD on my Macbook Air to 2012 according to the instructions of JetDrive transcend. Basically connection via USB 3 and using Mac OS X to clear (and format) disc utilities new SSD, then restore again SSD and then remove the original 128 GB SSD and insert the new 480 GB SSD.  For about a month and so far without problem.

  Now I'm trying to 2012 Macbook upgrade my Pro partner (on 10.11.6).  I got a Crucial SSD MX300 to replace his HARD drive.  Crucial comes with (or recommend) Acronis software.  And a lot of the messages of the forum recommend Carbon Copy Clone.

  My question is if I can use the same method for the cloning of the HD as my Macbook Air (just restore disk of Mac OS X utilities)?  This time, I'm upgrading HARD drive and I don't know if something is different.  At the same time, if I got lucky the first time, I don't not ruin Macbook Pro my spouse this time.

  Thank you.

  Yes, you can use disk utility to clone your MBP wives, but unlike CCC, it will not clone the recovery and Partition.

• Question about resolution movie downloads

  If I buy a movie at a certain resolution (780p for example), but I want more later re - download at a higher or lower resolution (SD or 1080 p), can I do so and how?

  Same question perhaps for music. Some of my songs have been bought before the latest Apple codecs.

  Any help is appreciated!

  THX!

  Once you have made a purchase on the iTunes store, you will see your purchased items in the menu under accounts bar > bought. You can simply select the item purchased and re-upload.

  With regard to the resolution of the film for films that are offered, and you select the resolution, you can download it again and select a different resolution. For movies that are available as separate download to SD, 780, or 1080 points, you would be limited to the original resolution you selected.

• Why I can't ask questions.

  I just have a question.  I said that I can't ask questions.

  Do exactly what you did to make this post, but your question in there instead.

• Cannot reset the Security Questions

  Hello my dear

  -J' forgot my account security questions, but I remember password

  And I'm changing my Security Questions, but show me this sentence

  "Cannot reset Security Questions."

  We have insufficient information to reset your security questions. "

  -I want to solve this problem as soon as possible if permitted

  You should contact the account of Apple security team. To join, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (145081)

• Bootcamp Windows 10 question

  Hi all

  Stumbled upon a problem, try to install Windows 10 an end 2014 27' iMac w/retina education runs Yosemite 10.10.5. Bootcamp is V 5.1.4. 32 GB, 3.5 ghz Intel I5. Disk of 1 TB of Fusion. Before you try this, I read the guide of Bootcamp to install windows, but also a number of other tutorials and forum messages about potential problems. This research, I learned that for EDU edition you must change the name of the file from Win10_1607_Education_English_x64.iso to Win10_1607_English_x64.iso. Apparently to have the former name of the file may cause OS X to not recognize the ISO. That fact I started Bootcamp, waited while the software downloaded and created a bootable USB key and partitioned my drive giving Windows 70 GB of space. After that, I got the message that my computer is restarts. Upon restarting, I got the black screen with the blue Windows logo and a spinning loading animation. After a few minutes, a blue screen with a message "Windows has encountered and error with computer and must restart," or something similar. He was pretty quick, so maybe it's not word for Word, but it was not a helpful post in terms of saying something specific. When the computer reboots, I am sent directly to OS X, though a bit slower than normal. I tried to restart with the flash drive to see if the installer would start up, no dice. Try now the Option key at startup, the flash player is not available. Went into my settings to see if I could change my startup on Win disk install USB, no luck it no more.

  Now for the question: How can I get the Windows installation again? What I have to start the process, and if so, what should I use Bootcamp to delete the partition that was created? I have re-run Bootcamp and the only option that is checked is the partition and start and install/uninstall windows and delete the partition.

  Thanks for the help.

  Perform the following two procedures

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  If you use a USB drive, not a USB flash drive, you will have problems. It is recommended to use a 8-16 GB USB2 flash drive.

  If the installation program is located on a USB Flash drive, stop your Mac, connect the USB key, restart and hold down the alt/option key and select the Windows icon in the USB port. This installs Windows in BIOS mode. If you click the start EFI icon, it will install using the EFI mode (faster). You may need to change the partition from MBR to GPT using GPT Fdisk.

• Yahoo account question

  Yes, I understand these are the Apple support forums, but I don't know where else to ask this question and I thought some of you would have the answer to this question.

  I deleted my Yahoo account last week, but I've heard that the 500 million Yahoo accounts were hacked in 2014. I made my account in 2015. Im sure it is hacked since I made my account a year after the supposed hack, but if my account has been hacked and I deleted which would be safe?

  If your account did not exist in 2014, then it is has not been hacked. Removal of the guarantees it will not be new since there was more pirate. Normally, at least the hackers got access to more information in the narrative, as credit card numbers, change your Yahoo password would have sufficed.

• Text backup question / deleted

  I accidentally deleted one of my iPhone SMS 6 Plus.  They always show on my iMac and iPad but I fear when an AutoSave occurs, it will back up the iPhone and remove them to two other devices. What will happen?  I use iCloud if that makes a difference.

  Hi melissahh625,

  I understand that you have questions about your messages deleted on different devices. I know that it is important to have a handle on your data, so I'm happy to help you.

  When you receive messages, they are stored on different devices. This means that when you delete a device they will not be deleted on the other. This is the case, even if one of your backup devices to iCloud that these backups are specific to devices, as well.

  Thank you for using communities Support from Apple. See you soon!

• Question

  Look I went to a new site called collabmix.com, and in any case I tried one of my samples Logic Pro download for someone else to try to collaborate with and help me through my song production. In any case when I go to download, the site accepts only gif, jpg, jpeg, or png. How to record my song pro logic and make a jpeg or jpg file? Please someone... IM new to this site and maybe someone asked this already so I'm sorry if this is a redundant question. Anyway ill be looking for a response from the community here. Thank you

  GIF, jpg, jpeg, or png are all formats of image, audio files or formats of logic.

  I got a peek on the site but I'm not register. I'm going to guess and say you are in the wrong place to download your song.