Question on Control Panel

Similar Questions

• HP Envy 5531: HP Envy 5531 - question of Control Panel

  I just installed the HP Envy 5531.  It prints.  The problem is that the control panel shows just the logo of hp, "Configuration" / "Detail Demo" lower-left with a blue background on the lower right.  As much as I try to push the "Setup" - the control panel is unresponsive.  How can I fix?

  

  Called technical support.  The guy remotedly consulted printer, tried to update the firmware, but it has already been updated.  No other option other than what you gave me.

  BUT taking what I read on another blog (the touchpad being aligned by the control), I started a pressure under the buttom (where black meets money; just under the 'Setup' button - see photo where I placed my finger) and VOILA!  I managed to do the work.  It was difficult to find that spot again and again then the printer put in place, but I had finally finished it and now it works perfectly!  Hope this helps someone else!

  

• Question of Control Panel

  I just bought a printer HP 6520, no problem, unit works great, I love it.

  Issue. On the touch screen when there is more than one page to any topic (ie 1/2), how to scroll the next page?

  In the upper right corner, there is a small icon (key) to get the settings. It works very well, however, some of the parameters have 2 pages. How do the next page?

  Thank you

  fgoodjr

  Hi fgoodjr,

  Thanks a lot to visit the Forums from the HP Support! I see that you are interested in learning how to navigate the control panel of the HP Photosmart 6520.

  The best way to explain this is to drag upward slightly with your finger, when you see other options you can browse just slide up to see all available options, when you see the option you want to press down until you see open option.

  I could find this document which covers the touchscreen notebooks, but it gives you some common gestures touch screen: using the touch screen

  I hope this helps!

• Two screen question: Control Panel appears on the screen 1 but the mouse is on the screen 2 and so I can't access

  I have a Sony Vaio laptop connected to a stand alone monitor. I don't use the laptop screen unless there is a problem and then I had to alternate between the two screens using Fn F7 key.

  A problem has occurred with the rundll32 process (which I'm trying to fix separately) and this led to the PC automatically flicking between screens and then stick with the independent monitor but in low resolution (so I couldn't access the tool bar along the bottom).

  I went to control panel to change the resolution to high, but the question of rundll32 kept close the process.

  This left me with icons on the desktop of the monitor stand alone, a white color on the laptop screen (it is normally black) and the ease of Fn F7 does not (said the service is not available).

  When I click on Control Panel on the screen of stand alone, it opens on the screen of the laptop, but I can't access it because the function of the mouse is on the screen to stand alone.

  Can someone help before I go out drinking?

  Thanks, Temp.

  I seem to have solved the problem. It seems that display order has been reversed and so I just had to move the mouse to the right of the screen to stand alone (I had been pushing against the left hand side) to move on the screen of the laptop. From there on, I played a bit with the display settings in the control panel and, although the issue of the always kept dllrun32 throw me out, seems to be back on the screen of stand-alone only, with the correct resolution and the Fn f7 works again. This means I can put the top back on bottle of vodka, at least until the next issue of dllrun32 arises.

• Question about the control panel user accounts in windows 7.

  This might be a bit of a strange question, but I'll see what I get. Basically when I enter the control panel via my username (not the admin account) and click on "Add or remove user accounts" and enter a password to admin, the photos on my user and admin account both fail (but they are there on the log on screen, etc.). But the guest account (which is disabled) the image of bag of comments showing. But if I enable the guest account, the image disappears. Strange. Any ideas how to get the pictures to show up there?

  Also, I will add that this occurs only in the standard user, not my account Admin accounts I converted my standard account to an administrator account, and the pictures then decided to appear.

  Thanks for your time.

  I have the same problem, and that this does not affect my usage, I don't worry in this regard. Frankly, I was wondering that myself...

• Windows 8.1 update, my documents, and control panel questions

  I have a laptop HP Envy m6 and a few weeks ago, put PC updated to Windows 8.1 Windows 8. It was working fine until yesterday.

  When I open Explorer file it says that the 'My PC' folder is empty. Other times it works fine when the file Explorer is the first open but will not work if it is closed and reopened without restarting the computer. I also discovered that the Panel does not work. It opens but the window is empty. I can not access anything which would be normally accessed through the control panel as change the wallpaper, add or modify the equipment, etc.. Finally, with the exception files, icons indicating the type of file for example the Word Document, Pdf etc. do not appear when displayed in the file Explorer, but view correctly on the desktop computer. The computer works - I can access the internet, save, and create documents, but struggle to access later (if possible).

  Thanks for your help.

  NeedHelp55,

  If the upgrade has been done for weeks, while the problem is probably not the upgrade itself, although something is certainly wrong since then.

  Thoughts on the subject...

  ==========================================================================

  Windows updates

  If you have not done recently (or at all) be sure that you have all of your updates to Windows Installer.  Some people are 'Anti update' and the world can be a scary place with updates that don't always work as planned.  You have not to install updates for Windows 8.1 after the upgrade - this isn't a choice.  You can always disable them again later.

  ==========================================================================

  System Restore - back in time

  If the system has recently installed updates, and then if the system has created a Restore Point before these updates applied, then you can "back track" to a date / time before the changes have been made.

  Using Microsoft System Restore (Windows 8)

  Don't forget: you can create a Restore Point manually any time you want if you have these "back points."  This occasionally - it of a good thing and could save your back one of these days.  The smile.

  ==========================================================================

  New user account

  You could try to create a new account - create with administrator privileges, just in case you need the account later.

  If you can get the PC settings, then you might be able to create a new account.

  Long way around:

  Windows key > type anywhere pc > click PC config > other accounts > add account

  You can name the account that you want, and you can use with your current Microsoft account, login if you wish.  You may need to obtain a new Microsoft login code - you can use another device (phone, Tablet, another computer) to pick up the email containing the new code that will be sent to Microsoft.

  Log in to the new account and put in place the "settings" for this account.  Check if the new account actually works as expected.

  IF the new account is working and that your old account is messed up, then - use the new account, at least until you have one fix for the other.  You can always copy your documents.  Configure the settings for the account manually, however, to minimize the chances that 'break you' the new account.

  ============================================================================

  Click on the thumbs-up Kudos to say thank you.

  While I strive to reflect best practices of HP, I do not work for HP.

• How is it my copy is not a control panel

  My copy of thunderbird doesn't have a control panel so that I can make adjustments. In other words, my copy doesn't look like yours.

  No idea who 'your' is that you compare to but maybe that you note that more recent versions have hidden MENU bar and button AppMenu.
  You can reveal the menu bars hidden in most applications, including Thunderbird, pressing alt or F10.
  When the menu bar is displayed, select View-Toolbars and make sure the toolbars you want to be visible all the time. You can access the functions by using the AppMenu but they moved the menu choices and they not corresponding to any of the existing documentation.
  If this isn't your question please post more details because there was nothing in Thunderbird called control panel.

• iCloud Control Panel Ver 5.2 is not installed in Outlook 2016

  After you have installed the iCloud Control Panel for Windows 10

  you are prompted to configure Outlook for e-mail, contacts, calendars

  It will not be implemented (only said setting upward) I waited as long as 30 minutes

  tried to turn off the firewall and the two TrendMicro

  still does not work

  have also found that downloaded the program and the re

  I asked the same question on the help page of Windows and it is this that technology Windows, purple, wrote:

  VioletChen_MSFT responded on June 14, 2016

  • Microsoft
  • Support engineer

  In reply to SteveNightingale post on June 14, 2016

  Hi Steve,.

  Thanks for your reply.

  I tested on my side and I can't sync my calendar to iCloud for 2016 Outlook either. We don't know if Apple will release a fix. We recommend that post you a new thread in the Apple Support communities for additional help. Your understanding is appreciated.

  Kind regards
  Violet

• Firefox does support java applets if the "next generation plugin" is disabled via the control panel of the Java plugin.

  I'm still trying to get a definitive answer to this question.
  My applet is not 'Next Generation in line'. When we run our applet in Internet Explorer, it works very well as long as we disable the "next generation Plugin" via the Java plug-in Control Panel. However our applet does not work in Firefox if the cmdlet-the next generation"is disabled.

  It is a requirement that is I want to run an applet in Firefox 3.6.x or higher that the "next generation plugin" be activated via the control panel of the Java plugin.

  The current versions of Firefox (3.6 or later version) can only run Java applets through the next generation plugin.

  • http://Java.com/en/download/help/new_plugin.XML

• "Windows Explorer has stopped working" if I open Control Panel

  Guys, could someone help me please?

  When I open the Control Panel, it says "Windows Explorer has stopped working" and then it restarts Windows Explorer. When I right click on any folder it says "recording of the UI language is not valid" 5 times and for a split second, it says "Corrupted registry" then it works. But I am unable to use the control panel.

  I have Windows Vista home premium and Norton Antivirus.

  Can someone help me please?

  Hello

  The error message says something about corrupt registry.
  So, it seems that this issue would be related to incorrect or damaged registry entries.

  If the registry is damaged, your operating system will not work as it should and can feel such or similar problems.

  I m using the CCLeaner to clean the registry and other system files.
  It s a free tool and you should try it.

  If this does not work and if you notice the same question so I would recommend reinstalling the OS using the Toshiba recovery disc.
  In most cases this will help you fix this registry

• Satellite A665-15U 3D stereoscopic missing definition in the Nvidia Control Panel

  Hello

  I currently have a computer toshiba laptop A665-15U with an nvidia GT 330 M and an acer hd5360 projector.
  After checking on the nvidia site, GT 330 M working with 3D and my projector is also compatible with 3D.
  I also have the vision 3D Kit 2.

  The issue is that stereoscopic 3D is missing on my Nvidia Panel,
  I have contacted the customer of NVIDIA, mail service, and they said that:

  + To work in 3D display must connected to the NVIDIA graphics card. +
  + I would suggest you check with the manufacturer of the laptop if there was no output or not connected to the NVIDIA graphics card. +

  But I check on my laptot, there is only a single VGA port.

  shrieked, the screenshot of my connection:
  http://www.ZimageZ.com/zImage/screenshoot22.php

  is that what someone was the question?

  More information:
  I installed the latest nvidia driver:
  Version:
  306.97 WHQL

  I ran on 120 Hz on my projector

  I tried to remove and reinstalled the last pilot

  I tried to use only stereoscpic 3D driver on toshiba support website (does not work):
  10/06/10
  Stereoscopic 3D driver
  nVidia Windows 7-64 bit

  Hello

  To use nVidia 3D Vision, you will need to set the projector at 120 Hz
  You can do this in display properties
  Control Panel-> appearance and personalization-> display.

  In addition you must set the GPU nVidia as a default value for specific programs to use 3D on 120 Hz disaply external.

  Start-> Control Panel-> nVidia Control Panel.
  Now, expand 3D category settings and select manage 3D settings.
  In the program settings tab, select a program that needs to use the nVidia GPU (required for 3D) map

  Now select the GPU for this program.

  Here you will also find the universal installation guide of ision 3dv too
  http://www.nvidia.de/content/3DVision/docs/3DVision-universal-install-guide-aug12.PDF

• Control Panel opens at startup

  Control Panel opens at startup!
  How can I stop this.
  I recently installed antivirus software, maybe it has affected the settings?
  Any suggestions?
  See you soon

  Hello

  First of all it will be interesting to know from when it happened. If this started after anti-virus software, there is answer to your question.

  It's very strange. In any case please check in the Autostart folder if there is a shortcut in the Control Panel window. If so you can remove it and he is unbootable at commissioning.

• How to: open the control panel and check if Windows Update settings in Windows 8

  If you're running Windows 8 and you are not sure if you get the latest updates and patches Windows updates then the following video should help. It guides you through opening the control panel and how to check your Windows Update settings.

  Remember, make sure that Windows 8 is up-to-date on your computer, you must have the latest updates of Windows installed.

  You may also need to make sure that your computer is updated the software and drivers for your hardware or to trobleshooting purposes make sure it isn't updated drivers for your hardware. Here is a video that will show you how.

  I hope everyone finds these helpful videos. If you have any questions leave a message below. Remember, it is advisable to have the active Windows updates, however, there are certain circumstances (for example, troubleshooting) disable it temporarily is a good idea.

• HP Envy J049TX: Beats Audio Control Panel is not start/work

  My Beats Audio Control Panel does not work. When I Open Beats Audio, a dialog box appears indicating that

  "IDT Audio from PC has stopped working"

  I have recently upgraded to Windows 8.1 and the only problem I found was that the Beats Audio Control Panel does not work.

  I also tried to uninstall drivers and reinstall it from the hp website, find my model number and appropriate IDT Audio driver software, but this does not work too.
  Already when I got windows 8, beats audio has worked, but as soon as I upgraded to this 8.1, this error.

  Hi @MegaArm ,

  Welcome to the HP Forums!

  This is a fantastic place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your audio Beats worked very well until you upgraded to 8.1 Windows now, you get a dialog box indicating the "'IDT Audio of PC has stopped working". "

  You have tried to uninstall and reinstall the driver now prevail.

  If you go to Device Manager, what is the error on the audio device?

  Have you impossible to uninstall the driver or unable to reinstall the driver on the HP website.

  If you access the Device Manager can you right click on the audio and update the driver from here or do a driver roll back.

  Then, I'll try to do a HP PC - refresh your PC to solve problems (Windows 8) .

  The question must always be, if a recovery to factory.

  HP computers - performing a recovery of HP (Windows 8) system

  During recovery, you will receive an option to backup your personal files to avoid data loss. If you have not already done one, I suggest do you it now.

  HP computers - restore files that have been supported to the top using HP Recovery Manager (Windows 8)

  Once you have completed this process do all your Windows updates.

  Now run the HP Support Assistant to acquire the HP updates.

  Here is a link to the Computers HP - update of Windows 8 to 8.1 as a guide to redo the Windows 8.1 update.

  Good luck!

• Control Panel does not

  Not sure I chose the correct title. When I click on Control Panel, it does not. DC of the I can't question that prevents my external speakers to produce sound. When I bought the system 03/10/14 & hooked up everything was perfect. Yesterday not so much. Help, please

  Completely uninstall AVG, you already have Windows Defender built into Windows which is more than enough.   If you really don't want not a 3rd party program antivirus, I suggest Avast free:

  http://www.avast.com/index

  Now for your problem else:

  Windows key + X and select (Admin) prompt and type sfc/scannow exactly

  Then type Dism/online/Cleanup-Image /RestoreHealth

  And then redo the command sfc/scannow

  Reset

  These 3 process will take a long time to run, they can look like they are at a standstill, but they are not, let them run.