question on the materialized view unregistered on the main site

Similar Questions

• accidentally deleted logfiles Eve on the main site

  Hello
  
  on the main site the standby redo log groups 4, 5 and 6 were deleted accidentily:
  
  ALTER DATABASE, DROP LOGFILE GROUP 4
  Deleted Oracle managed file /opt/oracle/oradata/DB/archfiles/flashback/DB/onlinelog/o1_mf_4_77jcr8bz_.log
  ALTER DATABASE, DROP LOGFILE GROUP 5
  Deleted Oracle managed file /opt/oracle/oradata/DB/archfiles/flashback/DB/onlinelog/o1_mf_5_77jcrd9w_.log
  ALTER DATABASE, DROP LOGFILE GROUP 6
  Deleted Oracle managed file /opt/oracle/oradata/DB/archfiles/flashback/DB/onlinelog/o1_mf_6_77jcrjgt_.log
  
  It is a standby Redo Logs and no online Redo Logs!
  
  However, the last group of standby Redo Log on the main site is still available:
  
  Select the type, Member of v$ logfile where type = "STANDBY" (main site):
  GROUP # TYPE MEMBER
  ---------------------------------------------------------------------------------------------------------------------------------------------
  7 /opt/oracle/oradata/SELLPROD/archfiles/flashback/DB/onlinelog/o1_mf_7_77jcrmm7_.log EVE
  
  Select Group #, type, Member of v$ logfile where type = "STANDBY" (backup site):
  GROUP # TYPE MEMBER
  ---------------------------------------------------------------------------------------------------------------------------------------------
  4 /opt/oracle/oradata/DB/otherfiles/redo_a/stbyDB_srl0.f EVE
  5 /opt/oracle/oradata/DB/otherfiles/redo_a/stbyDB_srl1.f EVE
  6 /opt/oracle/oradata/DB/otherfiles/redo_a/stbyDB_srl2.f EVE
  7 /opt/oracle/oradata/DB/otherfiles/redo_a/stbyDB_srl3.f EVE
  
  DataGuard environment is set up in the maximum performance - so no errors are occurring.
  Newspapers waiting for Redo on the main site are created with OMF naming conventions.
  
  The question now is:
  -It would be OK just create 3 new groups of newspaper waiting for redo (Group # 4, 5 and 6) on the main site or which would cause
  some problems?
  I would use the statement ALTER DATABASE add STANDBY LOGFILE GROUP 4 m SIZE. Which would create fa OMF file?
  
  Thanks for any help
  Rgds
  JH

  The question now is:
  -It would be OK just create 3 new groups of newspaper waiting for redo (Group # 4, 5 and 6) on the main site or which would cause
  some problems?

  Standby Redo Logs would not be on the main database until you perform a failover operation. So, I would say, you can create 3 groups of newspaper waiting to roll forward the primary database.

  I would use the statement ALTER DATABASE add STANDBY LOGFILE GROUP 4 m SIZE. Which would create fa OMF file?

  The files are on OMF. So your above command would work perfectly.

• Traffic redirect Internet from the remote site on the main site using the tunel of vpn ipsec

  Hi all

  I have a problem to redirect internet traffic from my remote to the main site by the IPSEC VPN tunnel. The remote site is a Cisco 2801 router with ios (c2800nm-advipservicesk9 - mz.124 - 22.T) and the remote site has ios (C870-ADVSECURITYK9-M, Version 12.4 (15) T12, fc3 SOFTWARE VERSION). This redirect does not work and the last jump with extended traceroute form the remote site is the ip wan of the main site.

  Is there someone who can help me with the right settings this redirection via VPN?

  the remote site config file:

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Tableau Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  crypto ISAKMP policy 8

  BA 3des

  md5 hash

  preshared authentication

  ISAKMP crypto key dgsn2010 address 41.223.X.X

  !

  !

  Crypto ipsec transform-set esp-3des vpn

  !

  vpndgsn 10 ipsec-isakmp crypto map

  Description at HQ

  set of peer 41.223.X.X

  Set transform-set vpn

  match address VPNHQ

  !

  interface FastEthernet0

  IP 41.223.X.X 255.255.255.0

  NAT outside IP

  IP virtual-reassembly

  IP tcp adjust-mss 1300

  automatic duplex

  automatic speed

  vpndgsn card crypto

  !

  interface FastEthernet 4

  192.168.11.1 IP address 255.255.255.0

  IP nat inside

  no ip virtual-reassembly

  !

  IP route 0.0.0.0 0.0.0.0 41.223.X.X

  VPNHQ extended IP access list

  ip licensing 192.168.11.0 0.0.0.255 any

  !

  the main site config file:

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Tableau Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  crypto ISAKMP policy 10

  BA 3des

  md5 hash

  preshared authentication

  ISAKMP crypto key dgsn2010 address 41.223.X.X

  !

  !

  Crypto ipsec transform-set esp-3des vpn

  !

  vpncreo 10 ipsec-isakmp crypto map

  Description FOR bastos

  set of peer 41.205.X.X

  Set transform-set vpn

  match address 110

  !

  interface FastEthernet0/0

  Description OF WAN

  IP 41.223.X.X 255.255.255.240

  NAT outside IP

  IP tcp adjust-mss 1492

  vpncreo card crypto

  !

  interface FastEthernet0/1

  Description OF LAN

  IP 192.168.10.1 255.255.255.0

  IP nat inside

  automatic duplex

  automatic speed

  !

  overload of IP nat inside source list NAT interface FastEthernet0/0

  IP route 0.0.0.0 0.0.0.0 41.223.31.241

  access-list 110 permit ip any 192.168.11.0 0.0.0.255

  NAT extended IP access list

  deny ip 192.168.10.0 0.0.0.255 192.168.11.0 0.0.0.255 any

  permit ip 192.168.10.0 0.0.0.255 any

  ip licensing 192.168.11.0 0.0.0.255 any

  !

  You must configure the routing policy based closure for NAT can be invoked on the main site.

  Here is an example configuration for your reference:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a008073b06b.shtml

  Additionally, make sure that you don't do any NATing at your remote end, IE: you must configure the NAT exemption for all traffic from 192.168.11.0/24 to any (Internet).

  Hope that helps.

• Management Center of subscriptions (preferably) coding of the button "Accept" to redirect to the main site

  I work with my subscription management center and entered the option 'Edit & Preview '.

  What I'm trying to do, is to have the "Accept > >" button on the bottom run a javascript script that redirects to our main site. This would be instead of having just a message at the top says "your subscription status has changed."

  Does anyone know how to enter a script so that when a contact click the "Accept" button in the center of management of subscriptions, it will redirect you to the main site after you say it took your changes into account?

  
  

  

  
  

  I found this, which can help in our quest for this response, however, I don't know where to end the back of the ' Accept > "button code is. In addition, there is a and php possible solution, but I'm not familiar with those as well.

  I would like to know if someone managed to get their "Accept > ' button on the subscription/list to redirect to our main site management page:

  
  
  
  

  
  
  

  Read more: http://www.ehow.com/how_6299663_redirect-javascript.html#ixzz2YYA7hQlb

• Help: Update Manager 5.1 is not visible on the main site!

  Hello

  Our VMware environment, I have two sites - primary and secondary. When I was working to update the profiles of the host, I logged in the Update Manager. At the time when I logged in, update redirected the secondary site manager. I tried to dig into this and found that the Update Manager is installed on the secondary site server - not in the primary. I want to know if I need to install the update on the main site manager to work with host profiles upgrade.

  
  

  Thank you
  

  Each update manager should have your own database, but they can share the same SQL Server.

• With vSphere test/recovery replication all while keeping the main site online.

  Hi guys. niot sure if I'm missing something really obvious.

  From what I can understand tha base "recovery process" in vSphere Replication5.1 implies the following workflow

  However, our profession demands that we test the ability to recover the VMs selected the site of DR then than DO NOT impact main site.

  Is this possible without SRM / table to database replication / replication of VEEAM?

  Our installation program

  VCenter PROD (dedicated VLAN x)

  VR PROD device (including VLAN, dedicated)

  PROD-HA and DRS Cluster

  Guest PROD networking (VLAN z)

  DR VCenter (dedicated Vlan X)

  VR PROD device (including VLAN, dedicated)

  PROD-HA and DRS Cluster

  PROD comments Networking (VLAN, isolated, cannot drive to the main site)

  No RS and no possibility to use the replication table according to preverred, no Budget for VEEAM replciation.

  MUST BE DONE, while the primary site remains fully alive >

  Basic procedure to test recovery to DR and come back if I understand correctly >

  1 tasks replication setup (fact)

  2 access to the web in VCENTER DR > Pause/Stop replication on the virtual machines, we want to retrieve.

  3 web access in VCENTER DR > retrieve DR virtual machines using 'recover with the latest changes' (Show stop as primary/Source VM needs to go down)

  3 assuming that it is a path last step 3, we intend to move guests picked up at DR VLAN, one port groups and reconfigure the Ips using Powershell process mass

  4 active Directory and DNS will be changed to Dr. TEST Site to make usable salvaged customers.

  test to DR on revovered VMs in DR VLan 5 users, so this should be route back or affect the site of PROD.

  6 not recovered VMs to the main site. This required once more primal VMs being to low or EVEN be removed from the inventory!

  Procedure here

  VMware vSphere 5.1

  Looks like so there is no way to use vSphere replication to TEST the abilty to toggle, unless you can share the secrets with me.

  If you are using vSphere replication without SRM above it, recovery Test is not available. The process, you can follow in case you do not want your main Web site:

  (1) perform a recovery using the second option (retrieve by using the latest available data). In this way you will not have to power off of the VMs source and your main site will be online.

  (2) when the recovery is complete, stop the replications (which will be in a State of recovery)

  (3) power off VMs recovered, unsubscribe them inventory of VC, but keep the files of disk intact.

  (4) manually configure all repetitions using disks that have been left in the form of initial seeds. This will cause the changes to synchronize.

  In step 4 of ease, you can use the multi-vm replication configuration wizard vSphere. Just make sure that the data store target each disk that will be used as initial copy is put in the folder with the name of the virtual computer. Then, you could try to configure all virtual machines at once, performing the search of seeds and confirming to use.

• Storage of source files separate from the main site files

  Hello

  I use Dreamweaver CS6.

  Is it possible to set up a site definition to store files source (EG. Files Photoshop etc.) on a separate FTP, away from the main site files.

  I try to avoid having to configure site definitions 2 if possible to keep things tidy.

  So the end result would be something like this:

  Site files get downloaded on ftp.mysite.com

  and

  The contents of the folder _source gets downloaded on ftp.mysource.com

  Thank you.

  You can use an FTP 3rd party like FileZilla client to transfer files from the source to a different location on your server.

  Nancy O.

• How can I jump off image Loader UI to a marked section of the main site?

  I got my layout of the entire site in Flash CS4 and using AS3. I'm new to Flash and managed to properly segment the site with labels, add UI Chargers to the sections you want to make the smallest site and work faster, I was able to put a close button above the charger of the UI, that closes and brings back a user to a designated section of the site.

  And then I encountered a problem. I have a few images in each AC charger that I would work like buttons and also to bring the user to the desired section on the main site, but it seems to be a problem that the buttons are located inside the IU charger I can't figure out how to jump out of the charger to the main site.

  Is there a specific code for it or the whole layout must be restructured in some way?

  That error looks like ended you up talking to the UILoader.  Try to add another parent in there.

• ORA-12028: type of materialized view is not supported by the main site

  Hi guys!

  We face a problem these days about the materialized view.

  We have upgraded database version 9.2.0.7 directly to 10.2.0.5 (RHEL4 x 86) on the same host. Database uses the driver dg4odbc to connect with remote SQL Server 2012 through data binding called MIKSERI. Our developer team would like to have replicated SQL server table data side Oracle using the materialized view.

  They created Materialized view, but it is not at all to refresh the data. I tried to study a little bit, and whenever I try to change the view anyway I hit error:

  ORA-12028: view type is not supported by the master site materialized @ 'MIKSERI '.

  ORA-06512: at line 22

  I looked at the solutions proposed and discovered that it is maybe the compatible database parameter, so I changed from previous 9.2.0.0.0 to 10.2.0.1.0 but still no luck. Just to emphasize this database is of course different clone of production to a different database, with db name retained and other parameters, but on another host computer and listening port. I even try to change global name, but still no luck.

  Main problem is that refresh the work does not at all. To be more precise, we have created MV on the side of the Oracle and FULL Refresh should be done every 3 minutes. MV uses HS db link to the sql server database. During the creation of MV, we can see currently given to sql server, but the problem is that we cannot do MV to refresh every 3 minutes. When I try to change MV and put the refresh interval I get above error.

  Any kind of help would be greatly appreciated,

  Thank you

  I found the reason why my MV update jobs failed, job_queue_processes parameter was equal to 0. I change this setting and now works fine.

  Thank you for your time!

• Just send a question to the support site that I can NOT connect on my email account after auto update of 38.3.0, cannot connect to my account to check the issue!

  I just posted a question on the last update automatic 38.3.0 it is possible to log into different e-mail accounts in a profile, only the first e-mail account. My support mozilla account is linked to one of the email accounts that I can NOT connect to. Can't connect to this email account to check the issue. Your last 38.3.0 Thunderbird is useless because it is no longer possible to log in different e-mail accounts in a profile, and your support solution is useless because you need to connect to the e-mail account to check the issue.
  How to proceed?

  You can change your email associated with your media profile.
  I have 38.3.0 and I can access all my email accounts I suggest you try the initial tests:

  Start T-bird with disabled modules.
  If it works on your module is to blame and you need to activate one by one.

  Start your operating system in safe mode with active network.
  If it works probably your antivirus is blocking or delaying. (Or driver).

• Question of the main application class

  Hey people out there!

  A happy Friday to all just a quick question. The class that contains the main Sub public static in the BlackBerry application method, this class should be one that extends UiApplication or can the main method call the class that is responsible for this?

  Thank you!

  Schalk

  You can try something like that.

  class Test
  {
      public static void main(String args[])
      {
          Xyz xyz = new Xyz();
          xyz.enterEventDispatcher();
      }
  }
  ---------------------
  
  class Xyz extends UiApplication
  {
      Xyz()
      {
          pushScreen(new MainScreen());
      }
  }
  

• I want to buy the game Age of Mythology: Titans expansion pack from the main site, but the link to do so is null and that brings me to an error page.

  I don't have a copy delivered to my home and very few stores carry PC games, none of which are nearby. Is it possible to buy this online expansion or fix the link in order to allow the purchase of the page (http://www.microsoft.com/games/titans/default.aspx)?

  Hello

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing.

  I suggest you follow the link to learn more below.

  Support for common issues of PC games:

  http://support.Microsoft.com/GP/games-for-Windows

  I hope that the information above helps you.

• interesting question of the vpn site to site NAT/PAT traffic config

  I have an ASA 8.4.2 running code and am just checking the Site to site configs before migration of tunnel. more precisely if the NAT/PAT and ACL is correct. Phase 1 is already defined and work, as well as cryptographic maps and tunnel groups.

  When you set the traffic interesting in the ACL are you using NAT or the real IP? The order of the ACL is correct?

  First of all:

  The vedor network is a 192.168.1.10 and must be coordinated to 10.1.0.2

  name 5.6.7.8 VendorName object-group network VendorName-R network-object host 192.168.1.10 object-group network VendorName-NAT-R network-object host 10.1.0.2 object-group network VendorName-L network-object host 10.1.1.3 access-list VendorName-crypto extended permit ip object-group VendorName-L object-group VendorName-NAT-R nat (inside,outside) 1 source static VendorName-L VendorName-NAT-R destination static VendorName-R VendorName-R

  Second:

  Sellers network is 192.168.1.0 to 192.168.2.0, these must be PATed 10.1.0.2 and 10.1.0.3

  192.168.1.20 and 168.1.21 must be staticly using a NAT 10.1.0.4 and 10.1.0.5

  Name the SupplierName 5.6.7.8

  object-group network VendorName-R-1

  network-object subnet 192.168.1.0 255.255.255.0

  object-group network VendorName-R-2

  network-object subnet 192.168.2.0 255.255.255.0

  object-group network VendorName-R-3

  network-object host 192.168.1.20

  object-group network VendorName-R-4

  network-object host 192.168.1.21

  object-group network VendorName-NAT-R-1

  network-object host 10.1.0.2

  object-group network VendorName-NAT-R-2

  network-object host 10.1.0.3

  object-group network VendorName-NAT-R-3

  network-object host 10.1.0.4

  object-group network VendorName-NAT-R-4

  network-object host 10.1.0.5

  object-group network VendorName-R

  network-object VendorName-NAT-R-1

  network-object VendorName-NAT-R-2

  network-object VendorName-NAT-R-3

  network-object VendorName-NAT-R-4

  object-group network VendorName-L

  network-object host 10.1.1.3

  the object-Network 10.1.1.6 host

  VendorName-crypto allowed extended ip access-list object-VendorName-L Group VendorName-R

  NAT (inside, outside) 1 dynamic source VendorName-l VendorName-NAT-R-1 static destination VendorName-R-1 VendorName-R-1

  NAT (inside, outside) 1 dynamic source VendorName-l VendorName-NAT-R-2 static destination VendorName-R-2 VendorName-R-2

  NAT (inside, outside) 1 static source VendorName-l VendorName-NAT-R-3 of destination VendorName-R-3 static VendorName-R-3

  NAT (inside, outside) 1 static source VendorName-l VendorName-NAT-R-4 static destination VendorName-R-4 VendorName-R-4

  Your valuable traffic acl MUST be the IP NAT address.

• How to restore the main sites visited when opening a new tab

  I was mucking around with themes today and now when I open a new tab, it does not show my most visited sites, it shows just a blank page. I had this problem before and somewhere managed to solve this problem, but now, I went through everything & I just can't understand how it back as it was. Can someone help me? When you click on a new tab, you have pictures of the page of the most visited and most listed sites in the right part. It's NOT top sites...

  This isn't a feature of Firefox, it was probably added by the extension of the Google toolbar. Look at the parameters of the GTB.

• Client VPN cannot access anything at the main Site

  I am sure that this problem has been resolved in a million times more, but I can't get this to work.  Can someone take a look at this quick config and tell me what is the problem?

  The Cisco VPN client connects without problems but I can't access anything whatsoever.

  ASA Version 8.4 (4)

  !

  ciscoasa hostname

  activate 8Ry2YjIyt7RRXU24 encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  switchport access vlan 15

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.43.254 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address a.a.a.a 255.255.255.248

  !

  interface Vlan15

  prior to interface Vlan1

  nameif IPOffice

  security-level 100

  IP 192.168.42.254 255.255.255.0

  !

  boot system Disk0: / asa844 - k8.bin

  passive FTP mode

  network object obj - 192.168.43.0

  192.168.43.0 subnet 255.255.255.0

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  network of the NETWORK_OBJ_10.11.12.0_24 object

  10.11.12.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_192.168.43.160_28 object

  subnet 192.168.43.160 255.255.255.240

  network of the IPOffice object

  subnet 0.0.0.0 0.0.0.0

  outside_access_in list extended access permit icmp any 192.168.42.0 255.255.255.0

  Note access list ACL for VPN Tunnel from Split vpn_SplitTunnel

  standard access list vpn_SplitTunnel allow 192.168.43.0 255.255.255.0

  AnyConnect_Client_Local_Print deny ip extended access list a whole

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd

  Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631

  print the access-list AnyConnect_Client_Local_Print Note Windows port

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100

  access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353

  AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355

  Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137

  AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  MTU 1500 IPOffice

  IP local pool newvpnpool 10.11.12.100 - 10.11.12.150 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 649.bin

  don't allow no asdm history

  ARP timeout 14400

  NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.11.12.0_24 NETWORK_OBJ_10.11.12.0_24 non-proxy-arp-search to itinerary

  NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.43.160_28 NETWORK_OBJ_192.168.43.160_28 non-proxy-arp-search to itinerary

  NAT (IPOffice, outside) static source any any static destination NETWORK_OBJ_192.168.43.160_28 NETWORK_OBJ_192.168.43.160_28 non-proxy-arp-search to itinerary

  !

  network obj_any object

  NAT dynamic interface (indoor, outdoor)

  network of the IPOffice object

  NAT (IPOffice, outside) dynamic interface

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 b.b.b.b 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  AAA authentication http LOCAL console

  AAA authentication LOCAL telnet console

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  http 0.0.0.0 0.0.0.0 outdoors

  http 192.168.43.0 255.255.255.0 inside

  http 192.168.42.0 255.255.255.0 IPOffice

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  IKEv1 crypto ipsec transform-set high - esp-3des esp-md5-hmac

  crypto ipsec transform-set encrypt method 1 IKEv1 esp-3des esp-sha-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  Crypto-map dynamic dynmap pfs set 30 Group1

  Crypto-map dynmap 30 set transform-set ikev1 strong dynamic - a

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  map rpVPN 65535-isakmp ipsec crypto dynamic dynmap

  rpVPN interface card crypto outside

  crypto isakmp identity address

  Crypto ikev1 allow outside

  IKEv1 crypto policy 1

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 2

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  SSH group dh-Group1-sha1 key exchange

  Console timeout 0

  dhcpd outside auto_config

  !

  dhcpd address 192.168.43.5 - 192.168.43.36 inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  AnyConnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1

  AnyConnect enable

  tunnel-group-list activate

  internal RPVPN group policy

  RPVPN group policy attributes

  value of server DNS 8.8.8.8

  Ikev1 VPN-tunnel-Protocol

  username admin privilege 15 encrypted password gP3lHsTOEfvj7Z3g

  username password encrypted blPoPZBKFYhjYewF privilege 0 mark

  type tunnel-group RPVPN remote access

  attributes global-tunnel-group RPVPN

  address newvpnpool pool

  Group Policy - by default-RPVPN

  IPSec-attributes tunnel-group RPVPN

  IKEv1 pre-shared-key *.

  !

  !

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:b3f15dda5472d65341d7c457f2e8b2a2

  : end

  Well Yes, you are quite right on site!

  Asymmetric routing is not supported on the firewall, such as trafficking and out should be via the interfaces of same, in the contrary case, it think it's an attack and drop the package.

  Default gateway on the subnet devices IPOffice should be the interface IPOffice ASA (192.168.42.254), not the switch, if it is a switch shared with your home network. Similarly for devices inside subnet, default gateway must be ASA 192.168.43.254.

  In regards to the switch, you can get a default gateway or the ASA inside or IP interface IPOffice ASA and the needs of return traffic to route through the same path