Question on the Pluarlist Web site

Similar Questions

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• After format and install Win XP Home and SP3 why can't open the Microsoft web sites?

  Need help, guys

  I had to replace my HARD drive in my computer. I installed my Windows XP Home SP2 disc. After installation, I used my SP3 upgrade drive and my drive to upgrade to IE8. After you install all my drivers, I tried to get Windows dates and discovered that I could not access the Microsoft web sites. I get Internet Explorer cannot display this page. I tried to find out why this is happening and how to correct the situation, but have not found an answer that works yet. Can someone give me an answer to this question.

  I have another (used) computer that I formatted the HDD installed and on Windows 7 and have had no problems to access the Microsoft web sites on. It uses the same modem cable like the other computer so I guess that everything is ok with my Internet connection. This problem seems to be only with Windows XP Home SP 3.

  Think in advance for any help

  Btk (billy the kid)

  Please do not share in the whole "BOLD". Which makes it hard to read!

  Please check that SP3 is installed:
  Start | Run
  Type:
  winver
  Press OK.
  Also, tell us what you mean by "trying to get Windows dates" since there are two ways to do this!

• Microsoft support "Sign In" on the Canadian Web site problems

  Hi, I'm of the Canada.

  I tried to sign in Support of Microsoft, specifically at this address:

  http://support.Microsoft.com/?ln=en-CA

  When I'm in 'http://support.microsoft.com/?ln=en-ca' in the upper right corner of the screen, it is said: 'change of Canada. " Which I guess means that I am on the Canadian Web site, since I live in the Canada.

  I click on Contact a technician of technical support by email, online or by phone

  then I click on Windows Vista Home Premium 64 - bit Edition

  Then I get this message "type the product identification number."

  I found the identification number of the product in the menu 'Start', click 'Control panel' and click on 'system '. I also noticed that it contains some basic information about my computer. As it is Windows "Windows Vista Home Premium" edition. "Service Pack 1". "System type: 64-bit operating system. And my "Product ID: ' 12345-XXX-1234567-12345.

  I enter my code of 23 characters in the field, I make sure that letters are uppercase and click on the continue"" button.

  That the of when I always get this message "there was a problem with the product ID. Please re - enter the ID of the product in the correct format. You can also get support by paying with a credit card. »

  I tried to enter my "product identification number" to the address of the US site as follows: "https://support.microsoft.com/oas/default.aspx?&c1=509&gprid=11920&&st=1&wfxredirect=1" I guess that's the American site because it says in the upper right of the screen: "United States (English). I get the same message: "there was a problem with the product ID. Please re - enter the ID of the product in the correct format. You can also get support by paying with a credit card. »

  I wonder if I need to cookies, or something on my computer to enter the Web of Support Microsoft Canada (English) site? http://support.Microsoft.com/?ln=en-CA

  If your computer is pre-installed with Vista (Dell, HP, etc.), you are not FREE Microsoft Support.

  All support is the manufacturer of your computer.

  But if you have problems, please ask in the Forums.

  http://social.answers.Microsoft.com/forums/en-us/category/windowsvista/

  Link above has a list of the Vista Forums for specific questions.

  See you soon.

  Mick Murphy - Microsoft partner

• Is it possible to download an image (.iso) of the operating system from the Microsoft Web site?

  As I've already bought the computer with the operating system installed on it and apparently I have not received any CD of the OS with it. But I have the ID of the product on the computer... is there a way where I could get a copy .iso of my operating system on the Microsoft Web site?

  Thank you!

  On-site upgrades are not well regarded by some contributors of this forum, including me. However if you want to try, I refer you to this link for an iso download...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/where-do-i-download-a-new-Windows7-Home-Premium/39547f65-5a91-4608-A439-c4ccaed1de56

  But before you go this route, I would say as you explore the possibilities to fix the problems you have in other ways. Try to publish or questions about your problem and see what happens. You can save yourself a lot of grief.

  Tricky

• access to the default in IIS6 and IIS7 Web site, how we configure IIS6 on windows 7 to allow access to the default Web site

  How to configure IIS6 on windows 7 to allow access to the default Web site or there at - there someone out there who can put up my computer at a reasonable rate of legend

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Going live with the new Web site in place of the old

  Hey,.

  I don't know if this is the right place for all of my questions, some refer content Wordpress, but all on the same site.

  I have developed a new site for our company. He will replace our current wordpress site which was tail entirely using wordpress by a web designer. The new Web site I developed using Muse for 90% of the construction, but I created a 'news blog' and 'customers' of the pages within wordpress and have insertedf this content as HTML elements on the site of Muse.

  The next thing is to start, but I'm very nervous about what we have a good number of site visitors e every day the transition should be as transparent as possible. Here are the things I want to achieve:

  1. move the new content of wordpress instead of the old wordpress site on our server. Doing so then write about the old content (saved) replacing the current url of the new generation which has ' / redevelopment ' suffix. The url would be as is currently: www.XXXX.com rather than www.XXXX.com/redevelopment

  "2 download the new content of the website developed in Muse in a download is completed by the new content of Wordpress so that, as stated above, we drop the ' / redevelopment" suffix and download as www.XXXX.com

  3. I work as a team with someone else and we have developed a website "desktop/tablet" version and a "mobile" version of the site on two different machines to spread the workload. The desktop build has been before Muse adding delicate design, both content and simply could not be worked back to work on the mobile, where we worked to delicate on the 'bureau' design so it works on tablets, but chose to develop a second generation for 'mobile '.

  So the question is how do ensure us that users coming to the site should be forwarded to the versions 'desktop' and 'mobile' of the site automatically?

  4. establish the 303 redirects, so that the old URLs with backlinks now push new URLS that have been SEO optimized with more descriptive terms.

  As I say, I realize this might not be the forum for this question, if anyone has any suggestions on this forum I could use which may be more appropriate, I would really appreciate the pointer (I posted this question on the forums of Wordpress too).

  Thanks in advance

  IMO, a sensitive site is the way to go.  I don't know your reasons for moving away from WordPress, however, it makes more sense to keep the whole of the site on a single platform responsive & dynamic instead of cut into separate pieces that you have.

  That said, the JavaScript redirect code is below.   Put this in thesection of all the pages of your site.   Window.location change the URL of your mobile/tablet.  Adjust the value of the breakpoint (950) as requires it.

  On the surface, this may seem like a good solution.  But you should be aware of the defects.

  1. It is not 100% reliable.  Redirect JavaScript will not work if users have JS disabled in their device.  It is not common, less than 5% of users have no script.   But users will see your site Office.
  2. It's a trip one way.  In other words, even if users want to see the site of the office, they can't get there unless they move on to more great devices or disable JavaScript & refresh their browser.
  3. With multiple URLS, there is risk of Google penalty to have contained duplicate on your site.   To avoid this, you must add canonical (preferred) URL of each pagetag.

  Good luck with your project!

  Nancy O.

• My computer crashed and after the purchase of another, I used the Migration Wizard to copy all the files to the new computer.  Everything was going well until I tried to launch LR6.  It was two weeks ago and a search for many pages of the Adobe Web site. 

  My computer crashed and after the purchase of another, I used the Migration Wizard to copy all the files to the new computer.  Everything was going well until I tried to launch LR6.  It was two weeks ago and a search for many pages of the Adobe Web site.  I think I've exhausted all the remedies listed without success codes error A12E5 to questions cloud creative, Manager of Application and error 1: Configuration problems.  I'm ready to reformat my computer and try again with Time Machine.  Help would be greatly appreciated before I waste more time on this task. Any further suggestions?

  Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -non-Cloud programs, to disable the service before uninstalling

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• PHP & ASP on the same Web site?

  Think I asked this before some time ago.

  PHP and asp can be used on the same Web site?

  Currently the site that I'm reviewing to make some updates uses asp to take advantage of the content in the pages.

  I need to introduce another section of the Web site using php to query a database and return the results. Can I do this using php, even if asp is used in another part of the Web site? I don't want to mix and match the language php and asp on the same page, it should be good, Yes?

  If so presumably, I need to create an additional database using mysql instead of some asp uses. Is it okay to have 2 databases for a single site, all the conflicts? As is standard practice for the server to run asp and php together? I can not in the server at the moment to test whether php is running, but I guess that's the first port of call.

  While I'm here maybe a php person can help me with another php question?

  Below, I'm hidding one line of text if the "location" in the database field is empty. What is the code to hide the row if 2 or more specific database fields are empty?

  <? PHP if (! empty ($row_rsDetails ['location'])) {? >}

  < p > please click on the links for more details < /p >

  <? PHP}? >

  I tried several combinations but it always generates an error.

  Thank you

  Operating system

  Murray * CPA * has written:

  I realized while taking my bike lunch that I gave you the logic wrong here.

  <>

  $foo = empty ($row_rsDetails ['EventWebsite']) + empty($row_rsDetails['LocationWebsite']) + empty($row_rsDetails['Charity1Website']) + empty($row_rsDetails['Charity2Website']);

  If ($foo) {? >}

  Please click on the links for more details

  Even this does not always work. Even if ALL the fields in the database above can clear the line

  Please click on the links for more details

  always appears when details are called

  Never mind. I'm going for the night now. I'll revisit this at some point. Its now become more of a personal question to try to solve this problem.

• Unable to delete the data from the Safari Web site...

  Hello.

  I need help with my Safari browser on my Mac.

  Im trying to remove all Web site data with the following procedure:

  Safari-> Preferences-> privacy-> Remove All Data Web site...

  His does not work. Before clicking on the button I have 108 Web sites stored cookies or other data, I click the button, and nothing happens... I'm still 108 cookies.

  I also did the following:

  . - activate the Menu developer and Cache empty and tried again... nothing

  . - used CleanMyMac v3 and it says I don't have cookies.

  . - order iCloud Sync of Safari on the computer and try again... same problem

  . - removed manually com.apple. Safari. Secure

  Any help will be great. Please let me know if you need any additional info.

  Thank you.

  Hello DZanvettor,

  Thank you for using communities of Apple Support.

  If I understand your message that nothing happens when you try to remove the Safari Web site data. I know how it is important for you to be able to remove the Safari Web site data. I recommend that you restart your Mac into safe mode and see if you can remove the data from the Web site in secure mode.

  Here are the steps to restart your Mac in safe mode:

  Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening.

  From your Mac in safe mode does the following:

  * Check your startup disk and attempts to fix problems if necessary directory
  * Loads only required kernel extensions
  * Prevents the elements start and the login items open automatically
  * Disables installed user fonts
  * Delete font caches, hiding the kernel and other files of the system cache
  * Together, these changes can help resolve or isolate issues related to your startup disk.

  Follow these steps to start in safe mode.

  1. start or restart your Mac.
  2. as soon as you hear the startup tone, hold down the SHIFT key.
  3. release the SHIFT key when you see the Apple logo appears on the screen.

  After you delete data from the Web site in safe mode restart your Mac and allow it to start up as usual. Then test the issue again.

  Best regards.

• My old broken computer and the hard drive is not recoverable. Is there a way to retrieve my favorites registered via the Firefox Web site?

  My old computer crashed. I took the hard drive to specialist to see if it could be salvaged, but it may not. Now I have a new computer and run Firefox. is there a way to retrieve my Firefox bookmarks and files on my new computer via the Firefox Web site?

  No sorry. If Mozilla saved automatically each users personal data to their website, this would be an extreme violation of the safety of users.

  There is the Firefox Sync - what is Firefox Sync - optional service which must be put in place before personal data is lost.

• When I zoomed in on a website, the other tabs with the same zoom area too; is there a way to disable the page Web site global zoom?

  When I zoomed in on a website, the other tabs with the same zoom area too; is there a way to disable the page Web site global zoom?

  You can change the zoom to be specific tab instead of in-situ.

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste the zoom and make a pause so that the list is filtered

  (3) double-click the preference browser.zoom.siteSpecific from true to false.

• MAC: can connect through the Skype Web site, but not through the Skype APP itself?

  I guess that the SAME password should work for the TWO the Skype Web site and the Skype APP. However, if the website sign - it works very well, the Skype APP has a msg: "Skype cannot connect." I'm using Version 6.3.0.602 on an iMac running the latest software of Yosemite. Solutions? What I am doing wrong? (P.S. I hear, there is a version 7 for Mac, but when I go to the site to download the "most recent" version, I get the above mentioned 6.3xxx.

  OK, I 'solved' myself. I downloaded a "dmg" on the site yesterday (7.2 v), but when I started to drag the 7.2 app in my apps folder, he "warned" in ERROR that I was running a later version on the computer. So, I did not install 7.2 yesterday.

  Today, I checked the version on the computer 6.3xxx vs the downloaded 7.2, and of course the 7.2 has been later. Ignore the message warning and dragged to the app folder and it logs how.

• Is it possible to get audio through the cDAQ Web site?

  Is it possible to get audio through the cDAQ Web site?

  I found a solution. I bought a Sabrent USB external stereo Sound Adapter. No need to download all the drivers, it is Plug-and-Play. Works perfectly!

• This page requires a version more recent Silverlight.Would you want to install the latest version from the Silverlight Web site?

  ---------------------------
  Microsoft Silverlight Update
  ---------------------------
  This page requires a newer version of Silverlight. You want to install the latest version from the Silverlight Web site?
  ---------------------------
  Yes No
  ---------------------------

  using Visual Studio RC 2012 and try to create a Silverlight application and the following error message occurs.

  ---------------------------
  Microsoft Visual Studio
  ---------------------------
  Mixture cannot continue because a compatible version of Silverlight is not found.
  ---------------------------
  Ok
  ---------------------------

  Silverlight forums: http://forums.silverlight.net/

  Visual Studio forums: http://social.msdn.microsoft.com/Forums/en-US/category/visualstudio

  -steve