Question on two files generated after installation of the src

Similar Questions

• Slimware download files can be deleted after installation in the programs?

  Slimware download files can be deleted after installation in the programs?

  Hello

  Do not download in the first place.

  Read this:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/Driverupdate-from-Slimware-utilities/d016d4a2-7ac4-467e-B07B-59058e7827e2

  See you soon.

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• OfficeJet 4500 - files disappear after scanning to the desktop Gateway computer using Vista Home 32 bit

  I have an Officejet 4500 g510n. My OS is vista home 32-bit on a Gateway desktop computer. I installed the full installation software. Files disappear after scanning using the HP Solution Center. I am able to print. There is a USB connection.

  I tried to download the "critical update" on this topic on the HP site but the link takes me to a complete installation I installed without success. Where can I find this update 'critical '.

  Try this link for the critical update:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&cc=us&DLC=en&lang=en&LC=en&OS=4063&product=3752459&softwareitem=OJ-81532-2

• I can not import PSD file to After effect in the form of composition.

  I can not import PSD file to After effect in the form of composition.

  When I try to import the PSD file according to the effect CC (2015) as a composition, AE will stop responding and then I have to close and restart the application.

  After effect CS6 works very well, but AE CC does not not and will close while I try to import the PSD file as a composition.

  can anyone help?

  Hi good morning all.

  I finally found what causes this problem.

  That I've added the link of 3ds max compositor (CEAP) to my folder plugin effects Jefferson, sequelae stops responding to PSD (import in the form of layers as a model) files.

  then, after the removal of this file (CEAP) every thing change to normal mode.

  now the question is only how to use 3ds max scene after effects without this headache.

  Thanks for everyone.

• See 4.5 SSL fails after installation of the certificate

  I have a problem after installation following the steps described in the VMWare KB (and a bunch of other places) a certificate is currently working on an assessment of view 4.5

  I set up the environment and everything worked without problems.  Then I installed a certificate using the keytool and the steps described above, ssl connections ceased to work.  The admin page would be just a moment and my client view (currently on trial with the OS X client) would also expire during an attempt of SSL connections.  I had previously enabled connections not secure so that both connections use http still operate.

  The only difference in my SSL import procedure, it's that I signed the certificate using our AD CA.  I imported the complete certificate chain as a .p7b file and keytool complained that he did not trust my CA, (I said yes to import in any case).

  After this issue, I even tried to go back to the original signed cert free by removing the key file and the file locked.config and SSL still does not work.

  Looking through the logs of the events on the server, there is no error SSL and the view admin page itself don't report problems with the server.

  The only other reference to a similar problem, I have seen on this subject is another post on the forums, but it appers that issue was because the server was also the Wyse report server running on this issue, my server is running anything else that the display manager, I do not use a security server just one server.

  Hello

  > I had previously enabled connections not secure so that both connections use http still operate.

  The option ' require SSL for client connections and Administrator display: "is common for the customer and Admin UI connections.

  Because you have disabled this option, only the connections non - ssl will work for both.

  Connect to youyr Admin UI by using http://serverfqdn/admin/ and enable this setting and restart the login server.

  -Noble

• After installation of the latest version of firefox on the homepage still says that I don't have the latest version

  After installation of the latest version of firefox and I use the new icon on my desktop, it always says that I don't have the latest version. Installation will correctly

  It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox, I do not think that it is maintained by Google.

  From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.

• Does not start after installation of the graphics driver

  After installation of the graphics driver from Nvidia NVS 140 m on the new installation of XP Pro SP0, black screen on reboot. All solutions?

  If the minimum driver was SP2, then you must have installed. I recommend that you have installed SP3 so that all the latest patches and security patches are in place.

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Try resetting the PS preferences - Preferences in Photoshop

  ~ Rohit

• LR4 RC2 is necessary after installation of the LR 4.1?

  LR4 RC2 is necessary after installation of the LR 4.1?

  N ° on a Windows system it will have been replaced by installing 4.1, but I'm not sure on Mac systems.

• Bluescreen apears on Satellite A40 after installation of the recovery CD

  Hello

  I have a Toshiba A40, and I tried to restore the system to factory with product CD recovery setting. The booted CD systems and you are prompted for an installation which was then completed and asked to restart the computer.

  However, after a reboot, the PC is not booting. A blue screen appears with a message that "Windows cannot be started due to some problems. Please check viruses or hard drive '.

  Then I started the PC with another disk bootable CD and checked for the latest anti-virus that doesn't show anything. Then I run SCANDISK on the hard disk and it doesn't show the problems.

  Could someone please advice?
  Thanks in advance.

  Hello

  It is perhaps a silly question, but have you used the right Toshiba Recovery CD designed especially for the computer laptop satellite A40?

  I read many threads here in the forum about people who has recovered or tired to get the phone clean with different and wrong Toshiba recovery CD s.

  After this procedure the laptop will not work properly and the BSOD could if poster because drivers preinstalled on the image of Tosh are not compatible with the laptop!

  So be careful!

• All icons are shaded and wavy after installation of the patch and restart (win xp sp3). How can I fix it?

  After you have installed the latest patches, all icons are shaded with vertical lines undulate on them.  Computers desktop and in Windows Explorer.  Application windows appear clear, but icnos in their midst are the same way.  What should I do to fix this anomaly?

  -J' tried the obvious desktop refresh. No change.
  -J' rebooted in safe mode, and then back to standard mode. No change.

  What else can I try?

  Hi JimGoode,

  Unfortunately, the screenshots are not available in the post.

  Given that the question does not appear in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then use SkyDrive download screenshots of icons.

  Use SkyDrive download collected files and after shot/screenshot.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

• Internet connection lost because of the error of the Ethernet controller after installation of the OS

  OK, I installed Windows XP3 Pro on Windows XP2 Pro on my computer of friends because of severe virus problems. However after installation, the controller Ethernet, video card, etc. also took out drivers. The computer manufacturer is no longer available, and some drives are available with these drivers. So is it possible to get the drivers on the system in order to restore the Internet connection? How can I determine what drivers to install?

  Open "Device Mamager" and search for points of question marks (?). Also make a list of all the drivers that are listed.

  Uninstall SP3: How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249/en-us

  If you still have a restore point made just before you install SP3, I'd
  Uninstall SP3 and then use the system restore, I hope that the combination will
  get you where you want to be.

  Now open the Device Manager"again and compare the list of SP3 for what is currently enrolled. Now you have a list of these drivers you need.

  Don't forget the video drivers: visit the download of the manufacture of the graphics card: download and install the latest Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com