Question related to the removal of Windows 8 and installing Windows XP

Similar Questions

• Question related to the upgrade to Windows 8.1

  I currently have a HP laptop with 4 GB of Ram and 64-bit Windows 7 SR1 running. I'll give this computer to my wife, that his old bridge is going Tango-uniform (UT). I bought a new Lenovo SmartCheck S535 with 6 GB Ram 1 TB of storage. It came with Windows 7 SR1 already on board and he also included disks for Windows 8.1. First of all, I did a set of boot rescue disks and start them on the side.

  But now, I have a question, do I have to transfer my files from HP to Lenovo so that both use Windows 7 SR1? Or. should I go ahead and upgrade the OS and transfer the files.

  I'm sure that happens with a lot of people, there will be a lot of programs that I keep less re - install on the new computer. They are trash who are picked up along the way for those of us who use or service of computers as often we brush our teeth. Oops... maybe it's not such a great comparison, but you get what I mean!

  So, I would be very interested to hear your advice, your success, Yes and even a failure or two, all for the purpose of education.

  Thank you and I look forward to hearing from some of you.

  SteveG

  Original title: which came first - the chicken or the egg? (So to speak!)

  As a system dual boot, the only place where the 2 operating systems interact is the bootstrapper. Windows 8 will take the priority, is somewhat different, as far as it goes, and if you select then Windows 7 system reboots so it can do a little slower. Of course, there will be a loss of disk space but you are then also 2 installs of Office and everything else.

  If you were to go down the possibility to buy a kit Windows 8.1 you avoid the need to do a complete reinstall, because it will improve instead. You also avoid the need to run the upgrade of the store from 8 to 8.1. You must decide if the cost is justified, but in your situation, I would seriously consider that option as well.

  Even if I'm not a big fan of Windows 8 I made the full switch and are accustomed to him, I'm sure you will as well.

• My question relates to the use of Windows Vista Edition backup Home Premium 32-bit

  I use Windows Vista Home Premium 32-bit backup to create a backup on an external hard drive files. the disk is almost full, I noticed the backup appears to create a new set of files each time that it will consume a considerable amount of space.  Is it safe to delete old files to free up disk space as current backup do not complete due to lack of space. I don't want to lose all the essential files in the erase process.

  Yes, you can delete the old files, because they are not needed when the new backup is created.
  My suggestion is to set up a backup incremental and will ovewrite the old backups so that you don't have to delete old backups.

• Question related to the entrance with pci 6221 and SCC 68 analog

  I use 6221 PCI and SCC 68 analog read of voltage between the terminals of the drain and the source of a transistor. The drain is at 0 Volt and source is connected to 5 volts via a 100 k resistor. The transistor is used as a follower of the source, and therefore the output is measured at the source of the Terminal. When I measure the voltage by using oscilloscope, I see clearly the change of output as a result of change of voltage of the door. But, when I try to acquire the same by using labview, I see nothing. I tried to change the signal to the CSR, NRSE, but nothing works. Seems to be that something related to differences in impedance. Can you please advice me on this issue? Thanks in advance

  Hi rsd111,

  I understand that you measure a circuit similar to this ( http://en.wikipedia.org/wiki/Common_drain)

  I also get that you use an external power supply with GND connected to the Drain and - 5V connected to the Source with a 100 k resistor.

  You should be able to measure the tension between D and S setup a differential measurement and connection Ai0 + D and Ai0 - s, in fact you can youse Ain you prefer.

  You should be able to do the same measure also at configuration NRSE linking Ai0 AiSense at the Source and drain.

  The Board's input impedance is greater than 10GOhm, it must behave as the oscilloscope in pairing mode high-impedance DC.

  6221 specifications: http://digital.ni.com/manuals.nsf/websearch/8117DF4C5A29C95C862573020061023B

  Nice day.

• Help with the removal of trial CS6 and install CS5.5

  I had the Trial Version now complete CS6 and bought a CS5.5 Design Premium.  I have to completely remove the trial before installation?  If so, how?

  No need, but feel free to do so. Run the Creative Suite cleanup tool after uninstalling just to be sure...

  Mylenium

• Qosmio G35-AV650: how remove Vista Boot Manager and install XP

  OK, I got the g35-av650 - US. I don't see any good American forum Toshiba, so I post here.
  First of all, I must say I'm getting very frustrated.

  1: I upgraded my BIOS to try to install windows vista. Vista installed, however, it works well. It must be driver problems. I deleted the partition that I allocated for Vista. Now, how the hell do I remove the screen/start menu in vista.
  I want to get back my XP operating system selection screen.
  I think it has to do with the boot record.

  2: my bluetooth isn't all work more (don't ask me why...) After that I updated the BIOS to version 1.40 to the newest 3.30.

  The recovery CD said I use the CD in the computer wrong? Is it possible to downgrade the BIOS/solve this problem, or bypass it.

  Thanks for the responses, because they will be very appreciated.

  Hello

  (1.) you want to reinstall XP on the HARD drive or you want to cancel only the vista Boot Manager.
  Usually after reinstalling XP, the boot manager should disappear.

  But I found these tips step by step in the internet:

  -Start your computer in Windows XP.
  -Make sure you have the image of Vista DVD emulated or in the DVD drive.
  -Go to start and run. Type in e:\boot\bootsect.exe/nt52 ALL/force (without the quotation marks and replace e: with the letter of your Vista DVD).
  -Restart the computer, and you notice that the selection of start menu disappeared.
  -Format the partition/drive where you installed Vista.
  -Remove the two (Boot.BAK and Bootsect.BAK) files on your file of root of drives XP (c), it was backup of your previous boot loader files, now is more useful.
  -Optional: Restart to make sure it still works.
  -Use your partition software to merge your partitions.

  2.), I hope that you have used the BIOS from the page we Toshiba. However, the BIOS update should not has a bad influence on the functionality of BT. Try to download the latest driver for BT and install again.

• In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed.

  In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed on a second PC. Where's the info of the scale which is held?

  Hello

  Once you have built your VI and compiled into an executable file and deployed on another machine, it essentially becomes a file read-only, which means that you will not be able to change the balance in this deployed application.

  Kind regards

  Marcus

• Why install adobe muse in install me the desktop CC version MUSE and installed on my laptop as mu profit 2015 is not open my laptop sites created on the desktop and vice versa

  Why install adobe muse in install me the desktop CC version MUSE and installed on my laptop as mu profit 2015 is not open my laptop sites created on the desktop and vice versa

  You must use the same version of Muse on the two computers.

  Don't forget that both computers running a 64-bit operating system to ensure you have the latest versions on both computers.

• Hi, I have 4 of Lightroom, but it does not support the new objective of pd 10-30 for my Nikon 1. It is supported in LR5. Can I download the profile of this lens and install in LR4?

  Hi, I have 4 of Lightroom, but it does not support the new objective of pd 10-30 for my Nikon 1. It is supported in LR5. Can I download the profile of this lens and install in LR4?

  Wow! It worked! Thank you very much! You just saved me buying a new verion of Lightroom (which is of course why Adobe does not update these profiles automatically).

  Thank you very much!

• After the removal of Windows 10, why do I see Mac HD and Bootcam

  I deleted Windows 10 of my MacBook Pro (version 2009). Now, why do I see two disk: 60 GB Bootcamp and Macintosh HD 99 GB? I expected to see only o

  Hello waxwingDr,

  I understand that you deleted Windows 10, but are still trying to see the drive Bootcamp on your Mac. Let's see if we can understand what is happening.

  The question I have is how did you remove the Windows of your Mac partition. Let me know if you did the following steps, described below.

  If you installed Windows on a drive with multiple partitions

  1. Start your Mac in OS X.
  2. Quit open applications and log out all users.
  3. Open Boot Camp Assistant, and then click on continue.
  4. Select "remove Windows 7 or later", then click on continue.
  5. Do one of the following:
     • If your Mac has a single drive internal, click on restore.
     • If your Mac has several internal drives, the Windows disk, select 'Restore the disk to a single OS X partition' Select to continue.

  Boot Camp: Remove Windows from your Mac
  https://support.Apple.com/kb/PH17861

  There are other ways to correct if you see always the two partitions. Take a look at the following article below that passes on the partitioning of a hard disk. It will be an option to delete a partition and expand your main Partition of Mac.

  Disk utility (El Capitan): partitioning a physical disk
  https://support.Apple.com/kb/PH22240

  Expand a volume

  If you have several volumes on a device, and one of them is running out of space, you will be able to expand without losing the files it contains.

  To enlarge a volume, you must delete the volume that comes after him on the device, and then move the end point of the volume you want to enlarge in the freed space. You cannot expand the last volume on a device.

  WARNING: When you delete a volume, all data thereon is erased. Don't forget to back up your data before you start.

  1. In the sidebar, select the device that contains the volume you want to enlarge, and then click the Partition button .

  2. In the diagram on the left, select the volume you want to delete, and then click the button Delete .

  3. Click on apply.

     The volume is deleted, reformatted, and all the free space is assigned to the previous volume.

  4. Click done.

  Let me know if it helps.

  Take care

• Cannot reinstall Windows XP after the removal of Windows 8. The installation does not complete.

  I installed win 8 January last on a xp pro machine, which was in surplus. I uninstalled the victory 8 and now impossible to reinstall win xp pro

  The computer is a homemade which ran from win xp pro for several years. I installed win 8 trial knowing that it would take a new installation of XP Pro after the expiration of the 8 victory. I have reset my bios on a cd first and started in the installation cd after installing win xp, it went to boot, and the cd has been removed. a restart was launched and he went into the bios to save install and after the robot below the windows splash logo made 3 passes, he stopped at halfway. After this is is spent in attempts to bppting I noticed that whenever the start stopped he left the Num lock, cap lock, and scroll liux lights were all on on the keyboard. I traded my keyboard with one of my current computer and it always occurres. I started to reload several times now and always the same. No bios settings have helped.

  Hello

  Unplug the machine to see if this allows the machine to reinstall the operating system of any material not needed (such as printers, fax, speakers, USB devices (except keyboard and mouse), Internet connections, etc.).

• Memory problems and questions related to the process

  Does this look just for you, because the modified memory does little until after I had computer problems and had to do a factory reset

  The operating system is Windows 7 64-bit edition SP1

  I disabled SuperFetch is told by the way, if this help anyone on this issue.

  Resource monitor

  

  Windows process

  

  Services

  

  

  

  Performance

  

  Hello

  When your computer doesn't have enough memory for all the actions it is trying to perform, Windows and your programs can stop working. To help prevent information loss, Windows will inform you when your computer is low on memory. You can also learn to recognize the signs of low memory and take measures to prevent the problem. Insufficient memory problems occur when your computer is running out of RAM and becomes virtual memory. This can happen when you run more programs that the RAM memory installed on the computer is designed to support. Low-memory problems can also occur when a program free up memory that it needs more. This problem is called memory overuse or a memory leak.

  You can consult the following Microsoft articles and check if it helps.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-AU/Windows7/diagnosing-memory-problems-on-your-computer

  Prevention of problems of memory

  http://Windows.Microsoft.com/en-AU/Windows/preventing-low-memory-problems#1TC=Windows-7

  You may receive an "Out of Memory" error message because of the limitation of in Windows Vista or Windows 7 desktop heap

  http://support.Microsoft.com/kb/947246

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• Two questions relating to the archive redo logs with RMAN backup

  DB version: 11g
  
  I am new to RMAN.
  
  My database is in ARCHIVELOG mode. I intend to make a weekly backup for my db (02:00 every Monday). There will be all the incremental backups between these windows(Monday-to-Monday) of backup that I have would function for retrieving archived redo logs.
  
  
  Question1.
  I want to save the archived logs every day (for example at 23:00). How can I configure that?
  
  These are the configuration setting, that I intend to implement. I don't know how to set up the archive log backup
  

  configure default device type to disk;
  configure retention policy to redundancy;
  configure device type disk parallelism 1;
  configure channel 1 device type disk clear;
  configure channel 2 device type disk clear;
  configure channel 1 device type disk format '/u05/rman1/datafiles/rmnabackup1_%U';
  configure channel 2 device type disk format '/u05/rman2/datafiles/rmnabackup2_%U';
  configure controlfile autobackup on;
  configure controlfile autobackup format for device type disk to '/u05/rman1/control_files/rmnabackup1_%U';

  Question2.
  After that a new full backup is taken at 02:00 on Mondays, the archived redo logs accumulated since the last 7 days become unnecessary. How can I automate the removal of the archive redo logs with RMAN?

  Archive the log delete them all input command will take the destination of the log archiving log backup archive and delete this destination.

  In the log archive destination he has archived log in the sequence 1 to 100 then will he take the backup and delete any of the destination (Monday 23:00).

  In the log archive destination he has archived sequence journal 101 to 150 then will he take the backup and remove those in the destination (Tuesday 23:00).

  In the log archive destination he has archived log in the sequence from 151 to 180 so will he take the backup and delete any of the destination (Wednesday 10:00).

  It will continue like that.

  Concerning
  Asif Kabir

  -If you help brand the response as correct/useful.

• Question related to the Xbox; Impossible to get Xbox live or to connect to the internet

  I've had my Xbox 360 for 4 years now and have recently decided to use it. I put in place when I was first, and for some reason any, I put the setting of family on it, I asked my parents if they did but they said no, so I thought I could have done myself but I don't remember the password or my security question and now I can not their and I can't get Xbox live or connect to the internet. I looked on the internet means that I could reset the Xbox or the parameters of the family, but they include all something on your hard drive but I don't have a hard drive, I also saw that if you put your age as 18 years as the family settings are enabled and you can find your access code in the settings , but I don't know where to find it. I would be grateful to anyone who helps to solve this problem.

  Try Xbox support:
  http://support.Xbox.com/en-us/

• Updating from Home Premium to Ultimate... Questions related to the installation of SP1

  Hello

  I upgraded my system from Home Premium to Ultimate successfully by any time to upgrade. I have run the windows update and the updates installed. Now my Windows update says I have to install SP1...

  My windows update shows I need to install Windows vista service pack 1 kb936330 released 28/04/09

  I can goahead and install it? My hard drive does not support the function of bit locker and I already install the KB937287 , kb935509 kb938371 necessary updates and all other updates in windows update.

  If I install the SP1, I won't get the problem to enter the loop (stage 3 of 3 99% complete configuration) right. Coz, I already had this problem and reset my laptop to factory settings... Now I want to ensure, prior to SP1

  Last time I installed the SP1 from the following link and had the problem of configuration step 3 of 3 99% finished and restart loop

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  I hope that this is an old... Please let me know what are the precautions I need to take prior to the SP1 update... I don't want to see step configuring updates 3 of 3 99% finished and restart No. n times

  Thank you

  I upgraded my system from Home Premium to Ultimate successfully by any time to upgrade. I have run the windows update and the updates installed. Now my Windows update says I have to install SP1...

  My windows update shows Windows vista service pack 1 kb936330 released 28/04/09

  This I can goahead and install it?...

  Yes, you must install SP1... even just because SP1 is a sine qua non for the installation of SP2.

  It's okay which shows SP1 installed on 29 Apr-09: you haven't had not upgraded to Vista Ultimate then. ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft