Satellite A660-O7R 3D - tasks Greens/smear on the screen

I've updated all the drivers and software to enable the 3D vision following the instructions on the support pages. Recently, I noticed when using windows media center, corel winDVD and starcraft 2 that there is a lot of green spots scattered around the screen. It's worse in media center, watching TV or if I'm in the menu there is green/purple smears that are all along the contours of background graphics.

in this move with the video, they are all along the outlines of people or objects while this mode TV, I'm in the menu of windows media center, and then they lie along the edges of those moving graphics. They seem to be frozen if I disable all animations. I tried reinstalling the drivers nvidia on the support pages, but it made it worse that the green spots began to appear on the wallpaper, and in microsoft office programs as well.

So I ended up doing a system to a restore point a full month back... it worked fine for an hour after that, but the same places and tasks began to appear again. the problem that I've seen so far is seen gradual rather than sudden. all 3 software I mentioned earlier are the only programs I have what 3D support and also used very often

Please can someone help? I love this machine, really looking forward to having to go back to the shop

Hello

> So I ended up doing a system to a restore point a full month back... it worked fine for an hour after that, but the same places and tasks began to appear again.

So he looks at it s more linked to the software with respect to the hardware problem, but of course, it could be related to the graphics card as well. So nothing is impossible, you know

Have you noticed that only by using the 3D feature?

If yes then the graphics card driver can cause this and as you say the use of the driver of nvidia page is worse then perhaps it s driver problem

But to be honest I didn t found similar problems in the forum so it's really hard to tell what could cause this.

Tags: Toshiba

Similar Questions

  • Satellite A660 - display seems to come out of the 'calibration '.

    I often hibernate instead of shut down or restart, even if I go to and from an administrator account to update Windows 7, Firefox and antimalware. I find that the screen tends to get all washed out, as if someone bent to the high brightness and reduces the contrast. It is not quite the same thing as the real Visual problem resembles a panel painted which is being altered, as white dither. It disappears after a reboot.

    Y at - it something of graphics can I reset manually rather than through a full reboot?

    It is not easy to say what the problem is here. The same happens when you use the sleep mode?
    Using original pre-installed BONES that you got with your laptop or maybe clean version of the OS?
    The original Toshiba display driver you are using.

    Satellite A660 is not the laptop more recent, so it will be interesting to know since when did you notice this behavior.

  • Satellite A660 - 11 m display is safe for the eyes?

    If any body know of course if the screen of the trunk Satellite A660 - 11 m for the eye because I have heard this eye turn red for a long time remain on the monitor
    If any body know about the safety of the monitor answer me & thank you

    > If any body know of course if the screen of the trunk Satellite A660 - 11 m for the eye because I have heard this eye turn red for a long time remain on the monitor

    :) Look, man

    Each screen (TV, LCD, TFT, portable computers display, external display, etc.) that may affect your eyes if you would not follow the rules recommended by the manufacturers and specialist eye ;)

    You should take a break between sessions of computer work and games.
    You must keep the distance to the screen and remember that your environment is bright enough

    Read the operating instructions and ask your eye specialist how to avoid red-eye ;)

  • Satellite L - small green dot on the screen

    I just started my new computer and on starting the loading screen (black screen), there seems to be a small (possibly green) point that is at the top of my screen and noticeable only when the screen is black.

    It will become more serious and is what I can do to change or is this something I need to worry? I would like to know as soon as possible, as if I need to send my computer back, that I'd rather not do something more about it.

    Thank you

    Zoe

    Hello

    I think you mean a defective pixel. Is this good?

    These bad pixels are pixels on a screen LCD does not work as expected. This can happen on all LCD s and there are different pixel fault classes.

    LCD has millions of pixels and if you have a single defective pixel, everything is ok. On my Satellite L300, I also have a defective pixel but I see that if the screen is black. T, you can return or Exchange the laptop with a defective pixel only.

    Here's an interesting document:
    http://APS2.toshiba-tro.de/KB0/TSB9502LZ0000R01.htm

    Good bye

  • Satellite L50-B-1F6 - default bottom right of the screen

    Hello

    I bought a Satellite L50-B-1F6 (Corei7, 4 GB of RAM, 1 TB, IPS FullHD screen).

    The first scratches on the screen near the time of the taskbar.

    So I sent the product to my retailer for an Exchange to a new.
    The new product has been delivered, open to the seller, and we have no scratches.

    So I return the product at home. The House, once I removed the plastic protective film that is around the screen.
    I then discovered another flaw in the bottom right of the screen, was not because of the plastic wrap.

    The surface of the screen and power off and causes unpleasant reflections.
    My dealer doesn't want, because we controlled the entire product.
    I post pictures of defects.

    Do you have also serious about finishing your Satellite, and then I get a refund or exchange of the Toshiba screen.

    [Photos: http://1drv.ms/11P8Hm5]

    According to me, there is no much to do the material is affected and replacement of equipment only made a real option to fix.

    If the dealer doesn t want to replace the product, contact the Toshiba authorized service provider for repair.

    But I m wondering about the dealer of laptop I put t know where you bought this laptop but in my country, each product is guaranteed by a guarantee, and in case of hardware problems, the dealer is forced to solve the problem.

  • Satellite X 200 - 15 K power on but the screen is black

    Hello

    I have Toshiba Satellite X 200-15 K, two days ago, I have problem with screen, the screen I have noise, I think it's the same error in my display driver and I have stop near windows xp and try to after 1 min, but the screen has more noise when the startup boot image and I stop by button / stop on laptop.

    Then do what I ve tried again to turn on my laptop but on the screen, I see only artifacts (same squadrons of colors) and after that, my laptop can not work, I tried to power on him but I only power led and HDD light works only 5 sec and after off the coast, and the cooler works 5 sec too and after offshore.

    I tried to remove the battery and the RAM and the wireless and all that I can :), but nothing happens, but when I try to power without RAM I see on power light beep two red and two yellow (IE my motherboard work).

    Maybe it can help me. I think I have dead motherboard.
    And for me, it is interesting that someone may have similar problems.

    Thank you.

    P.S Sorry for my English :)

    Hello

    Let's summary.
    You had a few artifacts on the screen, and now, you are not able to start the unit.
    Nothing appears on the screen; Neither the Toshiba start screen appears is good?

    Hmm seems material issue I m thinking about GPU (graphics chip).
    What do you think of this?

    If it's really a problem of graphics card, then you will need to replace the motherboard.
    In most cases the chip belongs to the mobo anyway... something like this can be done by an ASP in your country.

    Then please get in touch with the guys to get more details about this

    I wish you good luck

  • Satellite A100 - 510 PSAA2E cannot start - nothing on the screen

    Hello

    I had Satellite A100-510 (PSAA2E) since May 2006.
    2 weeks before, when I tried to switch the fans started spinning and the LED lit and after about 2 seconds, it restarts without showing anything on the screen.

    There is also no beeps or anything.

    I tried almost everything: remove the hard drive, screen, wireless card, dvd player, change the RAM between the slots...
    It makes no difference if.

    So I think it's a problem of memory or the motherboard is dead, what do you think?

    > So I think it's a problem of memory or the motherboard is dead, what do you think?
    Yes, the mentioned parts could cause this problem

    But it would be the worst case and you must contact the Toshiba ASP for more details

    Before that you would get in contact with ASP, I recommend you try this:

    -Remove the battery, disconnect the adapter.
    -Wait 30-60 minutes
    -Bring the two parties together and try to turn on the laptop

    Maybe if this work around short help

  • Satellite P100-115 - vertical lines to appear on the screen

    Hello.

    My Satellite P100-115 is 2.5 years but yesterday a thin vertical line appeared on the screen.
    I already checked this problem by connecting an external monitor.

    The line does not appear on the external display.
    Could you tell me what might get hurt? I always took care of the laptop so he couldn't be a race of misuse.

    Concerning
    Lukas

    Hello, Lukas

    You did the right thing and tested it with the external monitor. There is evidence that the display is faulty and must be replaced. It has nothing with the help of the ADB. Such a thing just happens.

    Sorry, buddy, but there are two solutions, either Exchange the screen or use it with external monitor. :(

  • Satellite M60-162: vertical and transparent stripe on the screen

    Hello

    Satellite M60-162 appeared a transparent white vertical stripe on the screen of my laptop. The band is present at startup in the BIOS and in normal operation of the computer. How can I fix?

    No doubt with the replacement of the screen.

    A few years ago I had old Satellite M70 and it had a horizontal white line on the top of the screen. The line was also visible all the time, in the BIOS, when the home Toshiba screen showed and using OS.
    I replaced the LCD screen and everything was OK again.

  • Satellite L650-14F - lines and streaks appear on the screen

    I have a toshiba Satellite L650-14F PSK1LE, bought from a reseller of Romania last week and I have big problems with the video, I guess.
    The scree Somethime closes and appears a few scratches on the screen and I can't use any command.
    The blocking of the laptop. The only thing I can do is to close the laptop and re-open.
    The display driver is installed. What is the problem?

    PS: Sorry for my language and we hope you understand

    Hello

    There are some common steps that should be made on the one hand;
    -test new graphics driver
    -updated the BIOS to the latest version
    -recover the laptop to factory settings

    If the lines are still visible, you must connect an external display.
    If the lines would be visible also on the external monitor, the graphics card can be affected.

    In this case, the part needs to be replaced.
    But this is a job for a technician in ASP.

  • Satellite P10: clouds white and purple fading across the screen during startup

    I had problems with my laptop PC-10 so I bought a new hard drive (Fujitsu 60 GB instead of 40 GB) standard and have it myself. I was working very well with it for a long time, until suddenly I have had the strangest problem that I've ever seen on a computer...

    Sometimes, when you start the laptop, instead of the screen normal red "TOSHIBA" and the message to start Windows XP, the laptop displays simply little weird white and purple clouds fading across the screen, fading finally on a screen very dark, but not quite black.

    I thought first it was a problem with the DVD player, like when he finally gave and started normally, the DVD drive has been disabled. However, I noticed in the BIOS, under "Advanced" the Infrared Port shows intermittently - it shows with the [Disabled] setting next to him, but will be then disappear from the list, then reappear again and then go again and so on.

    Sometimes my computer will function normally, then completely shut (mouse and all) and will restart with the clouds!

    I looked in the Windows Event Viewer for when the laptop has locked up and have seen anything to do with a problem with IRQS for the Infrared Port. I disabled the infrared port in Device Manager (I managed to activate in the BIOS by loading the standard BIOS settings) and rebooted, but it started upward with the clouds once again, so I have the feeling that the infrared port is the culprit - loose connection may be defective material because it is located close to the DVD player and HD player.

    I was wondering if anyone has seen something like this before on any computer, and if they knew how to solve? It seems completely illogical that a defective IR port could change what is displayed on the screen on startup, unless of course there is something wrong with my HD boot sector?

    Any ideas?

    Thank you.

    Tom

    Hello

    I've never seen like this problem before and I don't think that this issue has something to do with the HARD drive or the IrDA port.
    As much as I know the IrDA port is not available on Satellite P10 - xxx

    For me, this looks like a faulty screen or graphics card.
    Have you tried to connect the external display? If this isn't the case, then try to do and check if it also appears on the external display.

    I recommend also to recover the laptop with Toshiba Recovery CD and then check the functionality.
    But if the malfunction appears so I would recommend contacting the Toshiba ASP for control from laptop

  • Satellite C660D - flash cards are not displayed on the screen

    Hello
    I bought a Toshiba Satellite C660D a month ago. Everything was fine, until the FN button is no longer displayed the OSD menu.
    I looked on the forums and there were various tips on very similar issues. I downloaded the package of value added once again, I looked in the settings of flash card and nothing does the trick. Could someone help me?

    Any advice would be welcome.

    (ps, job functions, but the screen shows no more).

    What you can do is to call the Toshiba s hotline and ask for help.

    In any case, I think they can tell you the same thing: you can try to reinstall VAP or flash cards utility of support or reinstall OS using HARD drive recovery facility. With the settings, it works well again.

  • Re: Satellite L855 and Windows 8 - can't adjust the screen brightness

    Hello world!

    I installed Windows 8 on my L855 Satellite and it is running pretty well except that I can not adjust the screen brightness. I have updated all drivers for win 8, but it does not solve the problem.

    Hope someone can help me! Thank you!!

    Can you do this using the settings in some diet plan?

  • The HP Omni100 5155 PC: HP omni100 5155 red and green lines on the screen

    I used a music cd in my pc one day and the next day I had thin green and red, vertical lines throughout the screen. I did a number of bugs, but the problem persists. I was wondering what I need to do or it sounds like a graphics card? Although I checked it and the message says: "the device is functioning properly."

    I tried the things:

    • updated drivers
    • scanned for viruses
    • cleaned the ram
    • memory diagnostic tool
    • update graphics card

    Sorry, for obvious reasons, I'm not here to sell you a computer.  Most of the all-in-one computer today have the specifications you are looking for, except perhaps the webcam integrated according to the model.  You can see the HP, Amazon or Tiger Direct store as examples.

    If you are looking to buy the same more or less the same model as you have now, they are abandoned or not available unless used or refurbished which I would not recommend it.

    Before doing something drastic, discover the repair costs to the one you have now.

  • Missing the Green volume on the screen bar!

    Hello
    I recently replaced the motherboard and the hard drive on my HP Pavilion m8200n, (he fell down). My computer guy did, and he reinstaled Windovs Wista Home Premium of its CD, the CD mine because were no good (it is what I was told). So I have none of the programs that came with the original model, and I have no Volume bar (white/green heart) that says you if your volume is on or Mute or present at the screen (desktop) when you turn off volume upwards or downwards. I do not know if I explained, but I don't know the name of 'good' for her. I looked online and what I basically read was that it can be restored back the original backup CD, and since I don't have one, use at least one, I can't do it. also, I read that it might be reinstaled even if someone sends you this 'program' and that I was not lucky to find one. could someone help me with this, please. Since I found this feature very useful and necessary. Thanks in advance

    Hi Kim,
    Thank you very much for your reply, but before I could even read, I FOUND (and I'm very proud of him :) the solution for this problem.)

    you are right that program volume bar is set by the manufacturer, in fact, it is, as I spoke with the service the customer of HP and ordered the new CD backup (hope I'll never have to them).
    sometimes in the past, I have lost my Green volume bar and abandons the tought that I'll never see him again. then my computer crashed and I had to reboot and voila! my green bar was back. then, after posting my question here, I went online and noticed that it mentioned several times keyboard update (I noticed that two or three keys on my keyboard do not work after changing the card mother/hard drive). It made me think, somehow it looked connected to me, and I went to the HP Web site, entered my computer model # and listed on 10 or so updates to drivers (provided with this model) and which do not. There was an update for the keyboard, I closed my eyes and hit instal. After 20 seconds or so my beautiful, green (in fact it is blue-same as previously, it was if long actually, I forgot the color :))) volume bar is on my screen.what I can say, I feel smart reeeally ;)))

    conclusion:
    There are a few things that come to mind, search this:
    1. check with your manufacturer of comps, first of all, each brand has its own "stuff", for example, the model of the Dells has another solution for this problem, as well as Toshiba, Acer, desktop or laptop (for the life of me, I could not find anything on HP)
    2. check here on this forum, some posts here gave me an idea which way to go
    3. don't buy HP! they put coins to the office, I paid more than $1,000, and they died 13 months after purchase (did I mention that I paid $422 repair/replacement motherboard and HD
     
    hope it helps someone

Maybe you are looking for

  • How to block a website?

    Hi, there is a forum that I had a bad experience with and I want to block directly to the outside. I can do this on firefox? Somehow the site not open even if it is clicked on? Thanks in advance

  • Satellite P10: Graphic problem - pixel jump upward and down

    What's wrong? If I move my P10, when it is turned on, the graphics sometimes work with failure - pixel jump up and down and the perspective is wrong materialized. What should I do? where is the problem? Thanks for your answers...

  • Is it possible to view the properties of the class defined by the user as a hierarchy

    So I drag a property node and right-click to display the list of all possible properties.  They are well organized into groups and subgroups etc... Is it possible to do the same for the properties I defined for a class?  Let's say I have 20 propertie

  • multi language interface

    Hello guys: I face a problem recently, my boss asks me a program with the interface in several languages, just different and the same background block diagram code, so at - it advice or ideas? I considered a method, package the main code and develop

  • I get a "error (0000008 0000006 0000001) stop 0X000000FE BUGCODE_USB_DRIVER".

    This message appears on the screen, all blue with white lettering. This happens when I try to quit, sleep or Hibernate the laptop. I then have him stopped manually.