Satellite L305-S5917 cannot create recovery disk

Similar Questions

• Cannot create recovery disk

  I just bought this laptop Friday CQ50-142.  Today I wated to create the recovery disc for it.  I will, however, the steps mentioned in the leaflet supplied with my computer laptop paperwork.  When I try to create the recovery disk, I get this error. "A set of recovery discs was created for this PC. That one game is allowed per PC. "I have never setup one set of recovery disc for the laptop.  I don't know that I get this error message.

  How can I create my recovery disks?

  Thanks for your help

  Do you have someone set up your laptop for you?  Was it new or mixed open-box?
  
  You might try to run this fixand try again... or call HP Technical Support to the 18004746836

• Satellite A300D - creating recovery disk problem

  Hello.

  I have Toshiba Satellite A300D-11 t (extended A300D-11) and I would like to create recovery disk. Problem is that I can't run the Toshiba Recovery disk creation tool. There is no shortcut in the start menu.
  I tried to run Program Files.

  Program itself exists (or at least I think it does), there are files in the Program Files folder, in "Programs and features" program is also so I could remove it.
  Simply click on the file TosRDC.exe (or any other file *.exe in this case) and it does not start.

  For memory - recovery partition exists and has not been changed.

  System - Vista Home Premium 32 bit.
  What should do?

  Hello

  I would say to pick up the machine from the disk and then, immediately after the machine, you should try to create a recovery disk. It could be that something in the meantime destroyed some piece of software in your operating system that could be the reason of this problem.

  Maybe not a very elegant solution but the only one that works every time.

  Welcome them

• Could not create Recovery DISK 2

  Hello

  I just bought a new computer laptop Toshiba Satellite M300/700 and tried to create recovery disks (4 DVD)
  I managed to create DVDs 1,3 & 4 with No Problem, but couldn't have created the DVD 2.
  I tried so many times and all failed after about 10 minutes of running, I've always had the same error messages like below:

  "The question has occurred when saving the data on the disk,
  the current pprocess will be stopped.
  A power calibration area error.
  Please check if the disc is scratched or dirty.
  If so, please try again with a new disc.

  (Error code: 0E01B5-26-00037304) "

  I searched on Google for this problem, then it worked once I used a format r
  any reason that he worked not + R DVD (all brand TDK Gold).

  I used several laptops has never had this type of problem.

  What this means, is repeated defective program or is defective DVD writer?

  Thanks for your help

  Hello

  It is not easy to say what the problem is here. I guess this can happen because of Toshiba Recovery Disk Creator. I don't know where you bought this laptop but there is a difference between recovery systems in Europe, Australia or US, but presumably also Toshiba recovery disc creator is the same for all laptops Toshiba worldwide.

  So, if you created the recovery media using DVD-R blank, it's OK and take care of them. You can use them for the installation of Vista more far. To be honest, I use only on DVD-R media. Somehow, I do not like the format +.

  What you can do is to use a third party as Nero software and test if it works with the DVD + R/RW media.

  > I used several laptops has never had this type of problem.
  Sorry, but we are discussing about Toshiba recovery disc creator and this software is probably not available on all these laptops you ve had in the past. If you have noticed this problem with Toshiba tool it doesn't mean another burning application cannot handle with DVD + r/RW media.

  If please test and let us know how it works.

  Good bye

• I have a hp compaq pressario c797ee, I not create recovery disk and lost data. Help, please.

  I not create recovery disks, in fact could not create because the DVD could not be the installation program appropriate for the burn. When I realized how do it, I had already deleted the recovery partition and had lost data recovery. The name of product HP Compaq pressario C797ee, the operating system is Windows Vista Home Basic Edition. Please tell me the link where I can download the recovery disks from which any alternative appropriate.

  Hello

  Please use this:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

  Kind regards.

• Failed to create recovery disk

  Hello!

  I apologize in advance for my English.

  After a year of perfect operation, I decided to completely restore my system (Windows Vista Home, HDX 18 Premium, 64-bit) using the hidden partition. Everything was fine.

  A week ago, my PC didn't start because he does not recognize the hard drive: no operating system found. No partition has been found, even the hidden (in my system is E).

  I tried to reset the BIOS and I was right: the booted system, performed all necessary diagnostics and load Windows.

  So, I decided to create a recovery disk to restore the system, even if no partition is found.

  But I have been unable to create recovery disks because the Recovery Manager utility froze, did not write any DVD, and after three hours, I had to turn off the PC, because nothing happened.

  My creation of recovery disks is slightly different from the pictures I've seen in many forums: instead of asking what kind of media, I would like to use (DVD, CD) and how many of them is needed, it simply shows a green bar: writing files, from 0% to 100%. When he arrived at 100%, it froze and nothing happened.

  Now I can not create a new set of disk (the program starts, but its window disappears immediately), even if the PC is running and I could (probably) restore the system using the hidden partition.

  Now:

  (1) are useful recovery disks if the hard drive is not recognized at all?

  (2) since it is possible to create a set of disks only, the failure of the attempt account?

  Thank you!

  You are welcome. Be sure to also follow the Macrium prompt to create a bootable cd. Label it as Macrium rescue and set aside to care for the child. Then whenever you need to restore your laptop to your Image backups, just boot with the cd and it guides you through it. Works even if Windows is too damaged to start.

• Satellite L50-A-161 - recovery media fails in the creat recovery disk

  Hello.
  I just buy a new Satellite L50-A-161 with 6 GB of Ram.
  When I try to create the recovery disks (3 4.7 Gb DVD) with support of recovery, during the check, after writing the first disc, I get this error message:

  Cannot read the file:
  D: \EFI-microsoft \boot \bcd
  (error code: 02014F - 20-00000000)

  and the process stops.

  Is there anyone thath can help me?

  Here are the specs of my notobook:
  Satelliete L50-A-161, 6 GB Ram, Intel Core I7 3630QM-2, 40GHz, NVIDIA GEFORCE GT740M 2 GB of RAM, L.O. W8 64bits.
  Ask for more, so needs.

  Thank you

  Hmmmm... There must be a problem with the recovery image.
  When you open retrieve creator of disc and if there is option for creating USB media please test.

  Maybe you'll be able to create the USB stick recovery.

• Satellite C70-A-13D: cannot create recovery media - error 02016e-3 c-0000000

  Hello

  I am creating a recovery flash drive on my new laptop satellite c70-a-13d windows 8 operating system and get the following message

  differences between the files following z\recovery\install20.swm target path e:\\zzimages\zzimages\install20.swm (error code 02016e_3c_0000000

  and the recovery disc creation end not any ideas what is wrong ive tried to do a few times - the flash drive is a toshiba transmemory 16 GB uhybs-o16gh

  Any help would be appreciated,
  I'm reluctant to buy the discs just to have the same problem with them also!

  Try please create recovery DVDs. A few empty drives are cheap. If the same problem happens again I recommend you to contact the nearest Toshiba service provider in your country and explain the situation. It's not your fault, and maybe you will get new free recovery disk.

  All don t delete anything on the HARD drive.

• Cannot find Recovery Disk 2 - Satellite A205-S6808

  Someone can help me. My Satellite (A205-S6808) died and I had to put a new hard drive. Now I can't find my second drive so I can't reinstall Vista. Can someone tell me where to get a disc or a picture of their make it for me. I want serial numbers or anything like that, I just need the second disc of recovery for Vista Home Premium.

  Call Toshiba and ask them to send you a replacement as defined recovery disk.

  You might be able to order online, visit the Web from Toshiba.

• Satellite Pro A300-1 has 8 error received trying to create Recovery Disk 2

  I just got my new laptop A300-1 has 8 today and as recommended in the manual I tried to create the Vista recovery disks using the recovery disk pre-installed program. I created the 1 disc successfully, but when I tried to create the disc 2, it worked a little, and then I got an error:-

  File not found: -.

  F:\06477XSP5. STORMWATER MANAGEMENT

  Error code: -.

  020150 20-00000000

  Any help to solve, such as Iif I can't create the disc, it looks like I might have to return it...

  My apologies if this has been previously answered, quite new to all this.

  Thank you very much.

  Are you trying to use DVD-R virgins?

• Satellite L500 - cannot create recovery discs - 0D00F6-49-00000001 error

  Hello

  My pc start up after that I did a system restore. For example, I can't use the function fn key.

  Last week I tried to format my pc. But when I opened the TOSHIBA Recovery Disc Creator got an untimely error 00000001-49-0D00F6.

  I've managed to create 2 4 DVDs. IM using Dvd - r from memorex.
  If anyone can help.

  Thanks in advance for your help.

  This is the first time that you try to create recovery discs?

  How you created 2 discs if the Toshiba recovery disc creator starts by mistake?

  Anyway, in this forum you will find similar topics. No doubt some recovery file is damaged, and the drive could not be created.
  I put t think that there is something that you can about it. Either it works or not. Maybe you should contact the nearest Toshiba service and explain the situation. I hope they can help you with this and disc Toshiba DVD original to order for you.

• Satellite Pro A120 - cannot install recovery disc

  Hi - I have a Toshiba Satellite Pro A120 PSAC1E-04H00VEN model number

  It was less his hard drive and I posted previously to try a 160 GB drive without success. I thought that the drive may be defective, so I have now acquired a 120 GB drive. It is not new, but assured me that it works. However, it does not work in this laptop! As before (with the disk 160), when I try to install it using the Toshiba restore disc, the operation just sticks on the "Please wait..." message. "for 30 minutes then the machine shuts down. Assuming that the hard drive is ok there at - it something more, that I can do to determine the problem with this laptop?

  FYI, this is what happens after installing the hard drive:
  I turn it on and get this message: NTLDR is missing. Press Ctrl + Alt + Delete to restart.
  I insert the product recovery disc, put off and then again when you press F12.
  I get a soft Purring over the Toshiba logo. I select the CD/DVD symbol and get a short message saying: the installer inspects the hardware configuration of your computer.
  I then get RAMDISK image loading... which takes less than 2 minutes.
  I then get a short message saying: from Windows Preinstallation Environment. Press F6 if you need to install a third-party RAID or SCSI driver...
  I then get it please wait... and after 10 seconds, the fan goes into overdrive! This Carry on during 30 minutes with him please wait... message, then the laptop turns off automatically.

  Any ideas anyone?

  Thank you.

  Hi Lapitup,

  Before you buy another HARD drive, you need to test a different installation disk you have already tried the two hard disks with the same problem so I think that the problem is not HARD drive itself

  If you have a normal installation disc of Windows, you can install Windows on this drive. So you can check if the recovery disk works properly or not. Theoretically, the disc could be wiped off so that the files cannot be read properly.

  In the worst cases, some of the material is affected. Then, you need professional help of an authorized service provider.

• Satellite Pro S300-10j and recovery disk

  Toshiba Satellite Pro S300-10j recovery disk

  OS: Vista Business

  Please can someone give me a link.
  Very much appreciated.

  Thank you

  Drivers for the supported operating systems you can find on the download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  This recovery is not understandable to me.
  What do you want exactly?

  Is that each new Toshiba notebook comes with the image of HARD drive recovery and recovery disk must be created using the preinstalled Toshiba Recovery Disk Creator.

• Satellite L500-20 X - no recovery disk

  Hi all

  Since yesterday my Satellite L500-20 x have only called Bluescreens 'Driver not less than or equal'--> Restart! It starts with win7 until the opening of the session, after that reboot every time. I try a lot of things to fix:
  Systemrepair (3Times) and no change
  Recovery of SystemRecovery (per disk HARD no CD) work but always bluescreens and no change to solve the problem.
  Memory check (from Win7) checked 3 times 100% ok.
  Toshiba HDD Recovery (I try several times but it turned off each time by bluescreen process... so I can't do that - unpossible complete recovery!)

  This is the first laptop I have buyed all and I've never heard of a recovery disk - so I don't create one! Now, I can't get in win7 - so I can't create it now. Anyone have any ideas? I want new windows to install... but I do not have the same Win Disk. Win = Win7 64 bit laptop all I have is WIn7 32 Bit for my HomePC.

  I need help!

  Salvation of the beam,

  If you don t have a Toshiba Recovery disk, you can order one at Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  It's worth a try if HDD recovery option doesn't work properly.

  If you order such a disc and install the original on the HARD drive settings will be restored. A clean install factory with all the drivers and tools (on the settings in the box) will be restored, and if that doesn t work, this seems to be a hardware malfunction

• Satellite L850-161 won't recovery disk boot

  When I got the laptop in 2012 I created 4 recovery disks, but since I had my HARD drive replaced in my SATELLITE L850-161 there the partition recovery with nothing in it, but the laptop won't boot no drive either so I can format it but really need, any suggestions?

  If you have 4 recovery disks be sure that start you the installation with disc number 1. After Exchange HARD drive, you should be able to use created of the recovery disks for recovery image installation.

  Another bootable disk starts correctly?

  To be honest I don t understand how new HDDD holds a recovery partition that will be created if recovery image installation works.

  Problem is that in such a situation you don t have a lot of options. In the worst case you can order the original disc of recovery for your machine.