Quick record 3D in question.

Similar Questions

• Quick Fix for more questions to eFax (Photosmart 7510 & Envy 110/114)

  Problems resolved by the patch:

  
  

  • Cannot send eFaxes
  • Cannot receive eFaxes
  • Cannot connect to the eFax on the front panel of the printer.
  • Cannot save eFax on the front panel of the printer.
  • Trying to access with eFax, it says that the printer is not connected wireless.
  • Trying to access with eFax, it asks that you activate web services before continuing.

  The fix:

  
  

  First, press the ePrint button in the upper left corner of the screen to your printer to access the menu of Web Services.

  Once there, press the button "settings".

  If printing is turned on, turn it off and then back on. Press the return key, then press 'Print the State'.

  If ePrint is off, turn it on. Press the return key, then press 'Print the State'.

  These steps may seem strange given that the problem is with eFax and eFax works on printing via ePrint service.

  If this fix does not work for all of the questions listed above, the problem is probably related to something else. Let me know what problem you are having in this thread and I will do everything I can to get all this work for you.

• IVR recording parameters (newbie question)

  Hi, I'm a beginner and just seeking hearing to optimize audio for an IVR system message. the specs are below. The sample rate / channels are fine. I'm just working on bandwidth / ceiling / brightness adjustment. Could someone talk to me please thanks to this? ... I guess I can then just set it as a preferred medium and use it on a base continues.

  Sampling frequency:	8000 Hz
  Bits/sample:	16 bit
  Channels:	Mono
  File format:	'.wav' standard
  Bandwidth:	Optimized for phone
  Cutting:	Not allowed
  Ceiling	-5 db
  Brightness	Soft

  Well, the bit of ceiling is easy - you just standardize your audio not clipped at-5 dB. Bandwidth will be limited to half of the sampling anyway, he can hardly avoid being "smoothly" since there are very few of HF content in it.

  The usual way to make a record as it is to save it 'normally' first (therefore a mono file 16-bit 44.1 k), and that's what you standardize to-5 dB, although you would like to limit to get rid of the pics before doing this. The idea is to get the tops where the rest of the level sits - it will make little difference to the sound for this purpose. There are several predefined parameters that you can use as a starting point for this - compressor single-band "voice leveller" for example. Then, you have limited dynamic range, which will improve the audibility on all systems. Now, you can normalize it to-5 dB, and then make a "save under" in a file of the correct sample rate. In this way, if it's not good you still have the original coming back for another go.

• Quick keyboard BT Motorola question

  Hello

  Search everything first :-)... .but cannot find an answer.

  On Motorola BT keyboard, row from the top, fourth right key, the button has 3 horizontal lines on it. Did not understand what he does?

  Sorry if obvious... but I missed

  Thank you

  This is for devices that use the WebTop, which means the Atrix. It does nothing (that I know of) on the Xoom.

  It is not clear and I see if we can get our updated FAQ for this information.

• Play a record of a Question NAS200

  IM thinking of moving from a NAS200 to one of the newer models with Gigabit. Can I move drives of NAS200 for newer models without having to reformat?

  Jorge

  Hi Jorge,.

  Pass a NAS200 to NMH disk will reformat the hard drive because they use a different file system. You should back up your data before moving the drive. Read this article from linksys: KB17899 - swapping drives between NAS200 and NMH series Media Hub.

  I hope this helps.

• I propose all the photos on a new external hard drive.  Now, all records have a question mark in them.  How can I find all THE PICTURES at once instead of having to find each photo. I have about 30 000 photos. In Mac Help. LR5

  I've implemented a new external hard drive and Im trying to redirect LR to the new hard drive. I have over 30,000 photos and Im trying to see if there is a way to pictures located without having to go through each folder at a time

  http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  See Figure 4

• Quick slideshow full screen question

  Hello, I'm so so close to finishing my first website with Adobe Muse, but there is only one thing that it has to be perfect. I am creating a website similar to this - http://www.heatherannecampbell.com/ I have all my pictures ready, the navigation bar is designed, but when I use the slideshow widget full screen, I can either make full screen, which hinders my navigation bar or I can uncheck the mode full screen have my display navigation bar , but the left and right columns just white - as if http://imgur.com/oBRNAt7

  Thanks for your help!

  Hello

  Do you mean that you are unable to see the bar when the fullscreen is checked in widget slide show full-screen navigation.

  If Yes, then you just need to check the layers, Navigation bar should be on the top layer. Please refer to the screenshot below.

  

  You can share a screenshot of the Plan view so that we can have a better idea of what all the settings that you use.

  Respect of

  Vivek

• Record the entire Session?

  I know not how to save a window with multiple tabs and windows to reopen command from the previous session, but is it possible - in Safari, or through some 3rd party plugin - to quickly record an entire session of Safari (i.e. multiple windows, some with several tabs) so that you can restore all of the session at a later date, even after you have opened and closed several small sessions in the meantime , and the session in question is no longer what Safari is considered the official "precedent"?

  Thank you

  John b

  That sounds like it could be accomplished with TabSnap ($1.99). Maybe someone knows an alternative method.

  (Note that I am affiliated with this site and can receive compensation if you buy the app).

• Quality of frame rate is low when my Xbox has recorded video on Adobe Premiere elements 13

  Whenever I try to import a record Collection Master Chief, it comes out all the glitch in the search. I record with my HD PVR 2 games Ed Pro at 1920 x 1080 p 60 FPS, but with this capture card, it is able to record to it, but then falls the FPS up to 30 images/s after you save the file.

  The video is seem to have problems with the framerate. When I look at my images recorded on Windows Media Player, it plays very well. No no tear, no problems with the pace. The fades of when you die to the screen goes black and then spawn yours isn't looking for lag. But when I put in the first 13 items, quality decreases enormously.

  I have visited several page layouts. I tried. 1920 x 1080 p MP4 and YouTube HD 1920 x 1080 p 30 fps. None works well. Even after doing a quality test and download to YouTube to see if that fixes it, it still has the problem. I also tried to lower the FPS, and none of them does not seem to work.

  I was told that it had to do with the fact that Adobe can't handle 60 FPS, but when I got the trial he worked for Forza (running 1080 p 60 FPS on Xbox as well). The only other video I tried so far on my purchased version is The Crew, but running at 30 FPS.

  Computer: i7 4710 2.50 GH/z laptop, 16 GB RAM, NVIDIA 850 M

  Video editing: Adobe first Elements 13

  Recorder: HD PVR 2 Gaming Pro Edition @ 1080 p/60 fps on a .mp4 file

  Video with questions: https://www.youtube.com/watch?v=dtpf7R4aq9w[1]

  In addition, another problem is that the audio is disabled. But it's something else that I don't notice after registration. It's as if the software can not handle this record at all. Can I get a refund from Adobe (I bought at a discount of $30 about 2 weeks, return on their website) and get their latest version? Although I don't really want to get a monthly test. Or I have to change the settings in my recording studio?

  CarbonCamaroSS

  You can make a copy of the original project and see if what follows is a quick way to the question...

  Click on the file where you have your video and audio related and select unlink video and Audio on the shortcut menu.

  With audio selected, hold down ALT on the main keyboard to the computer, and press the arrow key right or left. Each tap of the arrow will push the audio 1 frame. If you press the Shift + Alt of the main keyboard to the computer and press the right or left arrow key once, every tap of the arrow will push the audio frames 5.

  RTA

• questions to iCloud

  I just bought a MacBook Pro with the retina, OS X El Capitan (10.11.6)

  My old computer have iCloud. When I checked

  System-> iCloud-> Menu-> devices preferences

  I have 2 question of security, but in Japanese. Only security issues, I said a few years ago where, in English and there where 3 of them.

  Also security-> Menu-> E-mail address of rescue

  The email address, I have not used for 5 years and all the addresses of e-mail for Apple when changed to the new email address, 5 years ago. (The old e-mail address is no longer active).

  Also-> change security issues

  Same problem with two security issues.

  As I have already connected to iCloud I do not understand why security issues are displayed, but also why security issues are in Japanese and two only compared to my record of 3 questions in English.

  Any ideas how to fix this would be appreciated.

  There is a contact link.

  Apple ID support

  Apple ID support (2)

• Firefox hangs (?.) BSOD) (/ questions/971282)

  For this last month that my computer has been lock up intermittently during the night. I traced the
  Firefox worm 26 problem. Sometimes the cursor will slow down and then freeze while using Firefox. The computer is completely enclosed and necessary for a hard reset. I installed the latest beta 27. Now, Firefox crashes for the BSOD. I need to resolve this problem quickly. There are questions killer deal with all other browsers, but they all work and do not freeze.
  Windows 7 64 bit
  8G memory
  256 GB, 1 TB HD SS system disc
  Intel Q9950
  MB GIGABYTE.

  Blue screen crashes are rare and usually require an incompatibility with driver graphics card. Launch Firefox in its Safe Mode and disable hardware acceleration.

  Hold down the SHIFT key when you start Firefox

  In the small dialog box that appears, click on 'Start mode safe' (not Reset)

  The orange open Firefox button (or Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  While you are in the settings view, disable all non-essential or unrecognized modules on these two tabs:

  Firefox orange (or the Tools menu) button > addons > Plugins category
  
  Firefox orange (or the Tools menu) button > addons > Extensions category

  Typically, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

• Tecra M10 - stuck - CTRL key question may be to do with the BIOS?

  Hello and thanks for reading.

  I recently changed my Tecra M10 to Windows 7 (from XP), and it quickly developed the dreaded question-button stuck CTRL This causes the keyboard behaves as if the CTRL key is pressed continuously. Sometimes reaching a key combination, or bring up the on-screen keyboard, temporarily solves the problem, but he returned.

  It seems to be a problem that many people have no simple solution. I watched each thread that I find and tried a lot of things to do with drivers etc without success.

  So first of all, if anyone knows a remedy that works for this particular machine, I would be very grateful to hear!

  Then, there are two things that I did not yet: updating the BIOS and turn off pinch zoom.

  I was watching the following BIOS update:

  http://www.Toshiba-Asia.com/SG/support/drivers/details/25244

  ... which is the version 3.00 and seem to be more recent. My version is 1.90.

  However, version 3.00 is labeled "for PTMB0 * ONLY. I don't know what that means or if it applies to me. Can anyone help? Should I install this BIOS?

  For the pinch zoom, I was informed that disable sometimes cures the problem CTRL - but I can't find any installation zoom pinch on the M10. I think he doesn't have any one. Is this fair?

  Thanks much for any help you can give.

  Hello

  > I was watching the next BIOS update. is the version 3.00, which seems to be most recent. My version is 1.90.

  There are different Tecra M10 models on the market.
  Check the labels at the bottom of the unit. There you should find numbers like for example PTMB0E-01K00LGR

  The first 6 characters are important: for example PTMB0E

  I guess that your laptop belongs to the series of Europeans.
  In this case, you should check the page of the Toshiba UE driver for a possible update of the BIOS.
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

  However, on the page of the Toshiba UE driver you will also find the BIOS for all European units Tecra M10 v3.0.

  Anyway, back to Ctrl + button question: guess what, you need to connect an external USB keyboard and must check how is the CTRL key.
  In case the USB keyboard would work properly, the internal keyboard CTRL key is assigned and you will need to replace the internal keyboard.

  PS: it would be possible that the "sticky keys" option has been activated. To disable this feature, you must press SHIFT 5 times in the line.

• Questions about the discs of recovery and partitioning Satellite A200-QH0

  I bought a model of Satellite A200-QH0 in Australia and due to the lack of forums in our country, I would like to ask a few questions here if that's ok.

  The book contains 3 partitions - partition "EISA Configuration" of 1.6 GB, the great partition of the BONE and the recovery partition. So I did the recovery DVD? s using the Recovery Disc Creator tool, as we are not provided with a real disk. But I would like to know what will make these records? My questions:

  1. they really will return that disc hard back to the _exactly_ how he was including the partition layout and software pre-installed?
  2 will be the recovery DVD works even if the disk has been repartioned? I would like to divide the system partition to give space for the files of data etc. But this extra partition will stop the recovery procedure works correctly?

  Please understand that I'm not interested in reformatting the entire disk. I want to just split the partition from the OS. But in case I need to replace the disk in the future or something, I would like to know how to close to 'original', these disks will make me, no matter what I do on the disc?

  Thank you
  Dave

  Hello

  I m not 100% sure how recovery works on the Australian laptops computers Toshiba, but I presume that the restore CD contains the image of Toshiba with the operating system Windows, drivers, tools and utilities.
  I think that if you want to use the recovery CD then the whole HARD drive will be formatted and all partitions will be erased.

  I think that the recovery partition is not created using the recovery CD because the CD of restoration has already been created for the recovery partition is no longer necessary

  Concerning

• LabVIEW 2009 freezes when recording vi

  Hello

  My LabVIEW 2009 v 9.0f2 (64-bit) crashes 20 seconds every time he saves vi.

  Has anyone seen that?

  Is there a fix for it?

  Thank you

  Pawel

  Pawel says:

  This time LabVIEW does not quickly record charts with some data in it.

  Sorry, could you clarify:

  • You have graphics with huge amounts of data by default?
  • You have graphics with sizes of the big story?

• Audio microphone recording sound recording

  I can't get my internal microphone to work properly.  During playback, my voice sounds like I am taking the floor in a kettle + it is barely audible and resonates as I am 1 million miles, speaking via a satellite connection.  I contacted the technical support of HP, was on the phone for about 3 hours during 2 days; I came home yesterday, the laptop (HP ENVY dv7 - 7333cl Notebook PC) at Costco, where I exchanged for an identical one that has the same problem.  On their recommendation, I downloaded a new audio driver, made updates, and last night I did a full system recovery, but, alas, no better... Help!

  [Moved from comments]

  Hi Tim,.

  What is the operating system installed on your computer?

  Please follow the methods and check if it works very well.

  Method 1:

  Run the troubleshooter from the link

  http://Windows.Microsoft.com/en-in/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  Follow the steps from the links

  http://Windows.Microsoft.com/en-in/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-fixing-common-sound-problems

  For all windows questions do not hesitate to contact us and we will be happy to help you.