R12 patch driver update failed due to invalid CTXSYS objects

Similar Questions

• on iPad Mini iOS 9.2.1 update fails due to low memory, even though 57 GB are available

  iOS 9.2.1 update failed due to low memory, although 57 GB was available.

  What is the cause and the fix?

  EN 57 is the size of your storage. There is no iPad with 57 GB of memory (live RAM). Have you tried to hold the home and power buttons until the iPad reboots? Also try double clicking the home button and close any open applications.

• Pavilion g6-2002au: USB driver update failed

  I did a periodic update of the system on the laptop drivers.  The last time, I remember it was almost 2 years ago.  And this time I encountered problems.

  This topic follows my request on this thread about SafeMode start/restore after a driver update failed:

  http://h30434.www3.HP.com/T5/notebook-boot-and-lockup/booting-safe-mode-on-HP-G6-2002au/m-p/5690028/...

  And as I said it I begam making one an update to pinpoint what caused the original problem with the bulk update.  After 7 by an updated driver, I found the (or, at least) a cause of the problem.  The following image, 2 PCI to USB host drivers caused an error message from windows after the update.

  

  There are 6 USB drivers linked to this very old/aged list and clear terms the number of items of equipment installed on the laptop.  See this screen shot of the Device Manager list:

  

  Drivers USB 6 update, I have taken these 2 items to be updated first because 1) they seemed to be the oldest (replacements were dated in 2010), and 2) if I understand technology, these bits connect the processor to host chip and the actual hub bus.

  I chose just these 2 PCI-drivers for update (unchecked the selection for all other boxes in the recall list) and proceeded.  When the installation has ended a windows message box reported an error of windows to one of the devices (one, not declared or referenced by a number).  Considering that the originals had worked for years without apparent problems, I started a process of restoration.  It worked, and restored 'very old' pilots work again without any error boxes, while the most recent have not.

  This is a screenshot of the restored Details of driver (work), which seem to be the original objects from Microsoft for XP3. Vista and windows 7

  

  Any ideas why this (the driver update failure) happens?

  Davidk10

  @Davidk10

  There is no update from HP, the prograns you are using is not supported by HP.

• Error: 1051293: connection fails due to invalid login credentials

  Hi Experts

  I use Hyperion 11.1.2.3. I want to create an application of Essbase. I'm trying so add Essbase server in Essbase Administration Services on the Essbase server. I used the admin account to create this new essbase application with uncheck two checkboxes "Use Single Sign On" and "use SSL". Finally, the error will appear as below. The same error for Essbase node selections 'EssbaseCluster-1' cluster and server port: "*." ***. ***. : 1423 ". We provide solutions to solve it, thanks.

  Admin 28 may 2014 10:24:57 CEST com.essbase.eas.admin.defs.AdminCommands.AddServerToUserList Succeeded

  Essbase Server: EssbaseCluster-1 com.essbase.eas.essbase.defs.ServerCommands.Connect 28 may 2014 10:24:57 CEST

  Error: 103: unexpected error Essbase 1051293

  Error: 1051293: connection fails due to invalid login credentials

  The reason is that my password is wrong. Here is the description of the Oracle documentation.

  If you log in for the first time after installation, use the default user name (admin) and password (password).

• Logon fails due to invalid login credentials

  Hello
  
  I get the following error only when I export, I'm trying to connect to Essbase. However, when I browse to target the mapping, I'm able to do. Worm 11.1.1.3 adapter ES11X-G4-E
  
  
  ERROR:
  Code............................................. 10403
  Description... Proceedings of Essbase API: Code [EsbLogin] cast: 1051293-1051293 - [Wed Jan 20 13:56:41 2010] Local / / / Error (1051293)
  
  Logon fails due to invalid login credentials
  Online: 128
  
  
  I tried with a few different Admin accounts, and I get the same error. All the thoughts/solutions?
  Thanks in advance.

  Hello

  Unfortunately for mapping navigation is not always a valid test. Some products that integrate the FDM with have what is called a "Dimension Cache" that are not active connections on the target system.

  You need to know what UserName/Password, you send to Essbase and test directly within Essbase for validity.

  First: -------------------------------------------
  Check the profiles of Machine in the FDM Workbench. If a name of user and password is defined in any profiles Machine is a global session opening and this information wrinkles too all and is passed to Essbase.

  Second: ----------------------------------------
  Check the settings and Application integration. They have what we call the "logon method" and "Global connection information" make sure logon method is set to unified if set to global then the connection information overall is passed to Essbase.

  Third: ---------------------------------------------
  If none of the above are true, then the user information is passed to Essbase.

  You want to make sure the configuration that you use in the order above and test appropriately.

  Hope this helps...

• Get Error (1051293) connection fails due to invalid connection with @XREF credentials

  Hello
  
  When business launcing planning regulations (9.3) and the console Admin Services, I have no problem, except my business rules that have @XREFs in them. I get the following error all the business rules that have @XREFs in them:
  
  Error (1051293) connection fails due to invalid login credentials
  
  I've never had this problem before, the rules of trade has successfully worked with about 8 months ago (our last budget cycle). I know that this error is usually something to do with a wrong ID or password, so it is really confusing to me why I get it. I run these rules using an admin ID, and I've never had problems before.
  
  Any ideas? Whatever it is will be useful.
  
  Thank you
  Liz

  Here's something to check:

  Open EAS and do a right click on the database on the database "target". (those where the formula exists with the XREF)

  SELECT , .

  Choose your alias to the location and let the user identifier. Set a password here and press the button 'Test '.

  If it works, save the alias to the location and try again your business rules. It sounds like the password the user ID referenced in your alias to the location may have changed.

  I hope this works.

  -Jake

• The TOSHIBA for Bluetooth ACPI driver update failed

  Hi all

  I have a P870 running on Windows 7 & until recently BT worked fine, now it doesn't.

  When I tried to download the latest version of the driver it says that I have the latest version of the driver.
  He also says that the device is functioning properly.

  It does not recognize my S4 where before he did.
  I now can not get it to pair because he does not see.

  When I did the last update of MS that I noticed the results put BT update failed, as shown below.

  Any ideas on a fix would be appreciated.

  The TOSHIBA for Bluetooth ACPI driver update
  Installation date: 08/08/2015-09:37
  Installation status: failed
  Error details: Code 80246005
  Update type: recommended

  This driver has been provided by TOSHIBA for the support of Bluetooth ACPI

  More information:
  http://sysdev.Microsoft.com/support/default.aspx

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  BT is activated using the function keys?

  What is the status of the Bluetooth technology in Device Manager?
  You see errors, some yellow exclamation?

  What you can do is use provided by the windows system restore and backup option and return to the point of time at the beginning, before the update have been installed...
  No doubt this has problem of BT

• D1G64UA: Windows 10 update fails due to no space in the recovery Partition

  Try to upgrade Windows to Windows 10 8.1 upgrade fails due to insufficient space in the recovery on the D: drive Partition

  The size of the recovery Partition is configured at installation of the HP factory and it leaves only about 3 GB, which is insufficient for the upgrade of Windows 10 start the upgrade begins by creating files in the recovery Partition.

  I don't want to remove the Windows 8.1 recovery files that already exist on the D: Partition of Recovery of the construction of the plant and in fact, I don't think that the o/s will allow me to delete these files from recovery.

  Any help in how to run the upgrade of Windows 10 is appreciated.

  Glad to see that my post has solved your problem.

  Please click "Accept as Solution" to my post so that others will see that this thread has been resolved.

  Thank you

• HP Pavilion x 360 Convertible: the Intel HD graphics driver update fails to install

  Hello

  I got my new laptop for Christmas and a few days ago, HP support assistant told me that there was a Version "Intel high definition (HD) Graphics Driver Update": 10.18.15.4281Ep3. I downloaded the updated, but after that 4 attempts trying to install via HP support assistant I kept getting the same message "installation failed." Then, I went to my downloads through Explorer of files and found the downloaded file. When I click on the file it takes me to the Setup Wizard and I can start the installation, but about 2/3 of the way if the installation I get the same message "the process cannot access the file because it is being used by another process" and then the installation completes without completing. I'm not sure how to find out which process is using the file or how to do the complete installation so I would really appreciate your help.

  Thank you very much, Rich

  Hello

  Follow the steps below to uninstall the driver:

  1. Press the Windows key + R
  2. Type devmgmt.msc
  3. Press Ok
  4. Right-click on the graphics card and select Uninstall
  5. Restart the computer

  After the computer restarts, run the Windows Update and the last update will be installed.

• the sp35174 graphics driver update fails to install and SP37534.exe fails in response resignations:

  Graphic updates failed, two of the three listed.

  SP35174 fails States: error in NVCPL. Entry DLL missing NvCplRestorePersistence - gives same error separated 4 messages.

  SP37534 hangs and will not end after 2 hours of waiting, only the green progress indicator keeps the movement from left to right.  Manager tasks indicates that it does not.

  Pavilion m7750n

  Vista operating system

  NVIDIA GeForce 6150LE graphics
  Computer seems to work OK

  Someone at - it suggestions on how to correct these errors of installation of driver update?

  SP35174 and SP37534 are your graphics drivers and you just install one of them. SP37534 is the most recent of the two, but I would try to install the driver nVidia GeForce 301.42 directly from nVidia. This driver is the latest driver for your 6150LE. I would like to uninstall any nVidia graphics driver currently installed before 301.42 also consider installing the driver nVidia nForce 15,49 chipset, which will good update number other drivers on your computer.

• The driver update failed

  When I try to update my drivers on hp.com, it says I need to download a file to automatically scan my computer. So I download and nothing happens, it opens, downloads, disappears and it is. I downloaded 5 times and I'm still not able to update my drivers.

  Im sure that I need to update, because my computer crashes randomly. Any suggestions would be helpful, but please make it easy for me to understand. I am not very computer

  Laptop HP G62 - 208CA

  captain_kirk_9,

  The error you received since the start of the test, is that the HARD drive has failed.

  Here is a link to a phone number to call HP and see what repair options, they may have for you.

  Also, here is a link to your service manual that has the part number for your disk and show you how to install a new HARD drive.

  Page 47.

  Your HARD drive is a reference number of 320 (7200 RPM) 599055-001

  Here is a link to the HP parts store

  I would like to know how everything goes.

  Nice day.

• The graphics driver update failed: 'WindowsUpdate_800705B4""WindowsUpdate_dt000"

  A long download and install driver for Nvidia ended with the message of this failure. What should I do?

  You should not be installing drivers from Windows Update anyway. I don't know why it failed but maybe because it is the wrong driver for your video card. Often, this happens with the drivers available on Windows Update and is one of the reasons we main technicians say do not install the drivers from there.

  Here is some general information about the drivers. Please note the first sentence of the information, which is the most important part.

  The first law of Driver Updates is "if it's not broken, don't fix it". Normally if everything works, you want to leave things as they are. The exception is that heavy players usually want to update their video and sound drivers for every last bit of absolute performance of the equipment to get the best frame rate. If you are not one of these people, you need not update your drivers, if there is no problem you're trying to solve.

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• After you download the Office Svc. 3 Pack, 6 important updates & 2 other updates failed due to an error 57F

  I have a PC with Vista Home Basic and remote access service. He sent me a message that the updates were available so I started the process. It downloaded & installed Office Service Pack 3 and all but 6 significant updates and 2 other updates failed. I tried 3 times to download & install the important updates 6 & when all 3 attempts have finished, the report indicates a 57F error code. In another location, trying to get specific information, I found: WindowsUpdate__0000057E and also Update__dt000 from Windows have been listed as the following:

  1) office 2003 Service Pack 3 (SP3) 108.2 MB

  (2) update 4 Microsoft Office 2003 (KB2543854) 12 K

  (3) update 4 Microsoft filter junk e-mail in Outlook 2003 (KB2553111) 3.4 MB

  (4) update 4 Microsoft filter junk e-mail in Outlook 2003 (KB2597035) 3.4 MB

  (5) update 4 Microsoft filter junk e-mail in Outlook 2003 (KB2598343) 3.4 MB

  (6) the update for Office 2003 (KB907417) 225 KB

  I hope someone can help to direct me to download & install the updates failed. Thank you!

  Hi Linda,

  Please, give him another chance & perform the procedure below

  Diagnosis: The permissions were incorrect for some registry keys.

  Considerations: I've used this for Vista Ultimate SP1 and Office 2003 SP3. A similar procedure may work for other versions of office and Windows, I don't know.

  You need to be reasonably computer or ask someone who is. You will need the installation of office files.

  Important note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  FIX: You * may * be able to use to Repair Office 2003 to identify the keys to the problem and then use the Registry Editor to change the relevant key permissions:

  1. connect to your computer as an administrator (if you can install programs, it is likely that you are an admin).

  2. run the Registry Editor (Start > run and run regedit).

  3. in the registry from backup of your registry Editor (select the top node of the computer, and then click file > export, save the file somewhere sensitive.). (Do not close the registry editor, yet).

  4. run a repair for Office 2003 (see relevant Microsoft KB).

  5. When you get an error in the repair process using the registry editor, find the EXACT registry key named on the command prompt (using the easy to find, Ctrl + F4 and F3 to repeat).

  6. right click on the key and select permissions on the shortcut menu.

  7 set the user groups to enable total control and reading (click OK to save the changes).

  DO NOT CHANGE A KEY UNLESS IT IS EXACTLY THE SAME AS IN THE REPAIR LINE.

  8. in repair, click the Retry button.

  9. If the error prompt is replaced by another invite for a different key then the fix worked. Repeat step 5 above for the new registry key.

  10. If the error reoccurs prompt then repeat step 6, but assign another likely group of total control, for example the system.

  11 when all the keys have been updated and the repair finishes and then close the registry editor, then try Windows Update again.

  12. If this does not correct the problem, then you must restore your backup registry file.

  PostScript: If you experience system problems after that you can restore the registry by double-clicking the registry file that you saved. If you can not do a repair of Office or run the registry editor, then you may not be an administrator.

  Also try running the difficulty to reset the components of Windows updates from the following link.
  How to reset the Windows Update components?
  
  http://support.Microsoft.com/kb/971058
   
  For more information, click on the link below,

  How to troubleshoot incidents to update your installation of Office on the Office Update Web site

  http://support.Microsoft.com/kb/304498

• Update fails due to the inability to extract downloaded files

  I click on the update and it crashes 50%, then returns a msg, impossible to extract.  ??  My other computer works fine.

  Hello

  Please see the thread below where a similar question was discussed:

  Update failed. Impossible to extract the downloaded files. (U44M11210)

  Kind regards

  Sheena

• Patch 17919161 for R12.2.4 update failed

  Hello:

  I'm being upgraded from R12.2.2 to R12.2.4 and upgrade patch 17919161 failed with the text following error occurs when executing POS_SUPPLIER_SEARCH_INDEX.sql.

  My version of the database is 11.2.0.3

  DECLARE

  *

  ERROR on line 1:

  ORA-20000: possearchindex.sql (500): ORA-20000: Exception to

  POS_SUPPLIER_SEARCH_INDEX_PKG.create_index (1800): ORA-20000: Exception to

  POS_SUPPLIER_SEARCH_INDEX_PKG.create_index (1800): ORA-29855: error occurred in

  execution of routine ODCIINDEXCREATE

  ORA-20000: Oracle text error:

  DRG-10754: memory size must be between 1024 and 1073741824

  ORA-06512: at line 58

  I found a note: 12.1.3: Procurement Family Update - Rollup current patch file: 18911810:R12. PRC_PF. B (Doc ID 1468883.1) according to the guidelines of this note for the DBMS data base 11.2.0.3 16706896 Patch is recommended to apply.

  My answer to these questions:

  -Can I apply this patch to the 11.2.3.0 for 12.2.4 database version of applications

  -The patch of the database requires to shutdown the database, if I stop the database processes of applications running on the fs2 file system becomes an orphan.

  -How can I manage the applications process

  Thanks & appreciate your answers.

  Syed.

  -Can I apply this patch to the 11.2.3.0 for 12.2.4 database version of applications

  Yes.

  -The patch of the database requires to shutdown the database, if I stop the database processes of applications running on the fs2 file system becomes an orphan.

  -How can I manage the applications process

  You must apply this hotfix to help ' adoption phase = apply apply_mode = patches ofdowntime = 17919161 "-Oracle E-Business Suite Release 12.2.4 Readme (Doc ID 1617458.1)

  When you apply patches in this mode, adoption will confirm first application layer services are declining and will then proceed to apply the patch in the editing of the system performance database and Oracle E-Business Suite file. Downtime mode patch does not use a cycle of correction online. The application process for a fix in downtime mode finished faster mode online, but at the expense of increased system downtime.

  Oracle E-Business Suite Guide interview

  Thank you

  Hussein