R3000 no sound after Vista installed

Similar Questions

• Satellite x 200 SLi: I lost sound after Vista SP1 installation

  Hello
  I have a Toshiba Satellite x 200 SLi

  After I installed the SP1 of Vista, I just lost sound and even update the audio drivers... I still have several problems such as: sometimes the sound stops, errors, try to display movies... etc...

  Vista tells me that I have Norman for update my drivers but I already have the last avaiable driver on TOSHIBA page.

  Anyone with the same problem?
  No idea how to solve this problem?

  Thank you

  The problem is that Microsoft's Vista SP1 makes trouble. The problem is that not all drivers are compatible and fully supported by SP1.

  I think you have a Realtek audio chip. Perhaps have you check the site Web of Realtek s the latest HD audio driver

  If this doesn't help, then you will have to wait until the new update is available (or you will remove him SP1)

• No sound after vista pack update help

  Please help me I have no sound after Windows update

  Here's how to solve your problem: http://answers.microsoft.com/en-us/windows/forum/windows_vista-sound/i-have-no-sound-after-installing-a-service-pack/f16247af-313a-418d-915e-6403012c25eb

• I have no sound after you install a service pack for Windows Vista

  I have installed the latest service pack for Windows Vista, and now I have no sound...

  Hi agenteilers,

  How to install/reinstall your audio drivers are in my message above, dated Saturday,
  September 26, 2009 21:25.

  I hope this helps.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• Satellite P100-442 - sound after Vista update problem

  Vista Home Premium operating system.

  Since "Vista Update" installed a pilot of its new "Conexant high definition SmartAudio HD2", the sound does not work.
  It does that after I do a "ch for devices modified" via "Device Manager".
  But I do whenever I have start the laptop.
  Should I first remove this driver (and how?) and to install the driver on the Toshiba site?

  Try to restore to an earlier time using System Restore option.

  If everything works again DO NOT install updates for ALL pilot rating. Just install update marked as important. All others (optional) update SHOULD NOT be installed at all.

• Sound after Vista-> downgrade XP on Satellite M100 problem

  My laptop is Toshiba Satellite M100. After bios upgrade (5.10-> 2.80) and downgrade OS (Vista-> XP) I have a sound problem.
  There is not a sound from the speakers. But the line out (headphone) sound is ptesent.
  I use drivers sound card for XP on the official website. Any ideas?

  Hello

  There is a good solution for your problem.
  Go to this site:
  www.Realtek.com

  and download the sounddrivers from there. In any case, they work perfectly since they are native drivers for this chipset.

  Welcome them

• Qosmio F30-147 - no sound after Vista upgrade

  I recently upgraded my Qosmio F30-147 of Windows XP MCE to Vista Business. I downloaded and installed almost all drivers available on the download page of Toshiba (including the update of the BIOS). Everything works fine but the sound. The SigmaTel High Definition Audio CODEC is the only "peripheral" listed in Device Manager. I have installed and uninstalled the SigmaTel driver available (version: 6.10.5462.0) several times without success. You have any ideas?

  Very strange! You have installed all the stuff with command described in the document instructions facilities facilities?

• Problems with sound after you install the operating system

  I have a compaq presario that originally vista os, the system crashed and I could get the recovery work so I installed windows xp and now I'm having problems with the sound. What should I do? I tried to locate the drivers requarding info. I keep getting error messages indicating that I have no audio device. Is it possible to go back to vista? I don't have an instillation cd or recovery for vista cd. Any help would be great.

  Hello

  Go to the link drivers HP > search your computer number model > XP OS > download and install the audio drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If no audio driver XP is available, HP provides them.

  Through the installation of XP, you have destroyed the provided HP recovery Partition Vista to reinstall Vista:

  Solve a common problem of recovery with the HP Compaq computers.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be started from either the desktop or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
   
  Contact HP and ask them to send you a set of Vista recovery disks.
  Normally, they do this for a small fee.
  http://h20566.www2.HP.com/portal/site/hpsc/public/help/contactHP/home/?AC.admitted=1340446095470.876444892.199480143
   

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How to install windows xp after vista installed windows and have an OS 2

  don't restore broken not register on XP, how to restore XP without pause 2-system configuration (install XP exist).

  Thank you! But this reference don't help me, because I have an installation disc for laptop (Vista) computer, there is not so much control as "repair system". I think that to use the program "HDHacker. This program save the sectors MBR and 2 logical drives on files and may start to restore. Also probably need to save files to directories root of two disks and after installation of XP to restore these files, the MBR and boot. Recently I read on a forum topic (he spoke of installation for portable computer diskettes). Do not know, trust this program or not. Thanks for the reply.

• No sound after re - install the W7Pro

  W7Pro just re-installed.  Had her before but not after the re - install.  Graph shows the evolution of the sound volumes.  plugged in and turned on, codecs, etc.  Poster of hi-def device works correctly.  I'm at my wits end.

  Hello

  According the description of the problem, it seems that you can not hear the sound of the computer after reinstalling Windows 7. I understand the inconvenience.

  Y at - it no point yellow exclamation or symbols of the red cross listed under sound, video and game in Device Managercontrollers?

  I suggest you to uninstall and reinstall the latest version of the audio drivers on the computer manufacturer website and check if it helps.

  Read the following article.

  No sound in Windows: http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Just reply to the State of the issue and let us know if you need more help. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards.

• Can not hear sound after you install Internet Explorer 9

  Original title: loss of sound

  I'm trying to get my sound on my PC-, he disappeared after the installation of IE 9. Its still does not not after having started with IE 8. All my drivers audio etc seem to work when I click on the test button. Someone at - it other advice?

  The two links below come from the Auto Center of FixIt Solution from Microsoft. Click on the URL, and then click the run now button.

  Diagnose and automatically fix problems reading audio http://support.microsoft.com/mats/AudioPlayback/

  Diagnose and automatically repair the problems of sound recording
  http://support.Microsoft.com/mats/AudioRecording/

  I hope this helps.

  Marilyn

• Laptop Toshiba DVD RD/CD RW ROM not recognized after Vista installed

  My Toshiba laptop which has Windows Vista cannot read my ODD.  A month ago I had the same problem which was worst, could recornize not WEIRD at all.  Now, it recornizes ODD, however, after the execution of this program to fixhttp://support.microsoft.com/gp/cd_dvd_drive_problems, still reads at all.  Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  ============================================================

  If necessary check with the help of Toshiba, their drivers online (update or reinstall) and their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• No sound after vista updated itself

  I have two computers acer laptops that connect to the internet by dial-up, everything works very well until last month, and now they both can not get a dial tone.  Modems are software based and the company that provided the driver (Agere) no longer exists.  Any suggestions besides becoming an external modem?

  Hi modemproblems,.

  Thank you for using answers Forum.

  There are a few things you can try.

  I suggest you roll back the device to the modem driver through the Device Manager.
  You can reach the Device Manager by clicking on 'Hardware and Sound' from the Control Panel, then click on 'Device Manager '.

  Alternatively, you can try System Restore to restore your computer to a time when modems worked.
  Here's an article on it:

  http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx

  Please let us know how it works.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No sound after upgrade to Vista on Tecra A8

  Hello.

  I just upgraded my Tecra A8 to Vista. I used the the repostitory of driver Realtek driver, but I do not get the operation.

  I searched by google that and found a help: I need to activate the Stereo Mix in the sound menu. Now, I see the activity in the speaker bar, but again the speakers say nothing.

  When I try to use the actual drivers from realtek, Stereo-Mix is "not available" because the unit was not found...

  Someone at - it the same problem? Or better: someone has a solution for this?

  Thank you

  Welcome,

  Rena? Â ©

  Hi Rene

  Seems that this utility allows the sound again.
  I found the same information here in this Toshiba document we:

  + Audio cut off (no sound) after you install Windows Vista +.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_dtlView.jsp?soID=1886758&BV_EngineID=cccdadd mlmmjhefcgfkceghdgngdgnn.0

  Best regards and I would be really appreciated your comments

• No sound in Vista Ultimate SP2 WMC for DVD movies

  Hi all. Vista Ultimate SP2 x 32,

  I want to watch movies on my HP Pavilion zv6000 DVD. The WMC play the DVD very well, but there is no sound. The sound works well otherwise game and music DVD OK. It is only the film DVD with no sound. I installed the codec and decoder to try to see if they could help, but so far nothing.

  I also installed the VCL and programs Corel DVD Pro and they play very well, good sound, but it is a trial version which I do not want to buy, so I would like to be able to use the WMC that comes with Vista that I already paid for.

  are there utilities or what is known to solve this kind of problem with the WMC Vista? The films are the only types of DVDs that I have the problem of noise, and they are all good DVD, Disney, etc., purchased on amazon.com, so that they are good media.

  Suggestions or recommendations would be appreciated.

  Just one additional bit of information for others. Other people I have rad and conversed with who have had the same question said that they could play the DVD movie with sound after you install the original version of Vista and even the SP1 update. But, after installing the SP2 update the sound played more. So what people could do is to check this area of their sound before installing SP2 to see if these boxes are checked and if not, go there first and uncheck these boxes after installing SP2.  I didn't know before not the hand, I did look to see if they checked if I don't know whether or not they were not checked before.

  But, in any case, after I installed SP2, they may need to uncheck these boxes in order to have sound with DVD movie again.