No sound after vista pack update help
Please help me I have no sound after Windows update
Here's how to solve your problem: http://answers.microsoft.com/en-us/windows/forum/windows_vista-sound/i-have-no-sound-after-installing-a-service-pack/f16247af-313a-418d-915e-6403012c25eb
Tags: Windows
Similar Questions
-
Computer Acer laptop failed after Vista SP1 update
original title: computer Acer laptop failed after Vista SP1 update - help!
I accepted an update from Microsoft for Vista SP1 on my Acer 5920 laptop. After re-boot to complete the update, the Acer is no longer wakes up. What happened and how I can fix itplease?
Follow these steps to try to solve your problems of boot.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
I have no sound after installing Windows update security.
Help, please! I don't have a solid any after that auto update installed some update Windows security. Not even system sounds work. I tried to use headphones too. I checked Device Manager and my Creative Vibra 128 sound card is enabled and working. I updated the driver for the card and the sound seemed to be coming back, but after the reboot, no sound again. My speakers have been tested separately on a different system and they worked very well. But I still have no sound coming out of my PC.
DirectSound test results: failure at step 3 (DirectSoundCreate): HRESULT = 0 x 80004005 (failed generic)
My system info:
Name of the operating system Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
Manufacturer of operating system Microsoft Corporation
Name of the system *.
System manufacturer VIAP4M
AWRDACPI system model
System Type X 86-based PC
Processor x 86 family 15 model 1 Stepping 3 GenuineIntel ~ 1699 Mhz
Version/Date BIOS Phoenix Technologies, LTD 6.00 PG, 18/07/03
SMBIOS Version 2.2
Windows C:\WINDOWS directory
System directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale *.
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
User name *.
Time zone *.
Total physical memory 1 024,00 MB
Available physical memory 395,46 MB
Total virtual memory 2.00 GB
Available virtual memory 1.96 GB
Page file space 2.33 GB
Paging file C:\pagefile.sys
It would be possible that the reason that your registry database seems to zero after the reboot is your antiviral is preventing to be changed when you update your drivers. but this is only an idea unproven, but a possibility.
in all cases, try to do a restore point for today / now. This will take a snapshot of the current state of the system.
Then, see if you can restore your computer state before the update that would have saved the drivers work and functional setup for your speaker system.
my suggestion is to run a system via safe mode restore it if the anti viral theory is true, that it will not impede the process of restoring system in safe mode.
-
No sound after installing Windows Update KB2962407 on Windows 8
After installing Windows Update KB2962407 (RT of Windows, Windows 8 and Windows Server 2012 cumulative hotfix: June 2014), the PC loses all the sounds. Its returns if I uninstall this update.
Hello
Microsoft has confirmed that this problem occurs on some Windows 8 PC. You can solve this problem by opting for Windows 8.1.
Microsoft made in Windows Update KB2962407 to fix this problem. While installing Windows 8.1 is the preferred method, you can also resolve this problem in Windows 8 by checking the updates of Windows and reinstall Windows Update KB2962407 .
-
Invisible comments after the last update - help?
(I moved this to its own thread because it's not exactly the same problem as one that I answered):
2 our group Mac users comments 'invisible' since the upgrade to the latest version of Acrobat Pro DC (2015.016.20039). and Adobe Reader. You can see the comments in the comments bar, but you don't see them anywhere on the page. It will move to the point where the comment should be, but it will not show the inscriptions on the PDF file. Here is an example:
The same problem occurs even after removing all preferences:
Does anyone else have this problem of comments after the last update? It will sometimes show bubbles of comments, sometimes show the insertion points and shows almost never strike thru. It's weird and incoherent.
We use a WebDAV server to store our comments, if relevant. Two of us on OS X 10.11.4.
Hi all
We have released a hotfix that resolves this problem on comments on zoom-in and zoom-out endangered today. If you're not already updated to the latest patch, simply open Acrobat and visit help > check for updates to apply this hotfix.
More details about this release and bug fixes is available here: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-june-02-2016.html
Please give it a try and let us know.
Thank you
-ashu
-
Satellite P100-442 - sound after Vista update problem
Vista Home Premium operating system.
Since "Vista Update" installed a pilot of its new "Conexant high definition SmartAudio HD2", the sound does not work.
It does that after I do a "ch for devices modified" via "Device Manager".
But I do whenever I have start the laptop.
Should I first remove this driver (and how?) and to install the driver on the Toshiba site?Try to restore to an earlier time using System Restore option.
If everything works again DO NOT install updates for ALL pilot rating. Just install update marked as important. All others (optional) update SHOULD NOT be installed at all.
-
No sound after vista updated itself
I have two computers acer laptops that connect to the internet by dial-up, everything works very well until last month, and now they both can not get a dial tone. Modems are software based and the company that provided the driver (Agere) no longer exists. Any suggestions besides becoming an external modem?
Hi modemproblems,.
Thank you for using answers Forum.
There are a few things you can try.
I suggest you roll back the device to the modem driver through the Device Manager.
You can reach the Device Manager by clicking on 'Hardware and Sound' from the Control Panel, then click on 'Device Manager '.Alternatively, you can try System Restore to restore your computer to a time when modems worked.
Here's an article on it:http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx
Please let us know how it works.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Sounds dead on my Imac 21.5 "Office 2012 after Adobe flash update: HELP!
Thanks in advance for your help. I am running the operating system OSX Yosemite 10.10.1 and safari 8.0.1
How can I solve this problem?
I'm not aware of a widespread problem as you describe.
I would try the following, if you did not already:
1.) reboot of the machine. See if the problem persists.
(2.) do a clean install of the Flash Player:
http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Mac-OS.html
http://fpdownload.Macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
(3.) if it does not, the sound works in other applications? What about different video sites? If it's just a few sites, a link to a video showing the problem would be helpful.
-
Satellite x 200 SLi: I lost sound after Vista SP1 installation
Hello
I have a Toshiba Satellite x 200 SLiAfter I installed the SP1 of Vista, I just lost sound and even update the audio drivers... I still have several problems such as: sometimes the sound stops, errors, try to display movies... etc...
Vista tells me that I have Norman for update my drivers but I already have the last avaiable driver on TOSHIBA page.
Anyone with the same problem?
No idea how to solve this problem?Thank you
The problem is that Microsoft's Vista SP1 makes trouble. The problem is that not all drivers are compatible and fully supported by SP1.
I think you have a Realtek audio chip. Perhaps have you check the site Web of Realtek s the latest HD audio driver
If this doesn't help, then you will have to wait until the new update is available (or you will remove him SP1)
-
Error recovery Windows after Vista MS updates - Acer
I have an Acer Aspire T180 - two years, has been my daughters. We have provided factory to use ourselves and have been running for about a week. Automatic updates recommended upgrade Vista to Service Pack (I don't remember if 1 or 2 and now impossible to verify). All seemed well, we used the computer after the upgrade with no problems. However, after the stop for the night and put on the next morning (yesterday), we now have a blue screen with an error of Windows recovery. Auto repair does not work and start normally does not work, and those are the only 2 options. I don't have the disk to reinstall what... should I just reset factory again and then make sure I have create a recovery/backup disk once we are up?
Hello
If you just put it to standatrds of the factory before this happened that the easiest would be to do it once again, as you suggest
and make the disks of backup system in the event of a hard drive failure
as soon as he is running again, you will see an Acer toolbar to the top of the screen
one of these icons in must click on it to start to make the records of recovery to reinstall vista again, if necessary
If you wish you can make this start repair disk and try to fix it:
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
and for later use, here's how backup data in vista
These methods depending on your version of vista
make backups on an external hard drive or DVD
see if this information helps you
How to make a backup of your data (all Vista versions)
http://www.vista4beginners.com/how-to-backup-your-data
How to restore your files
http://www.vista4beginners.com/how-to-restore-files
the 1st link below is how do the backup complete pc (Vista, full and professional company)
http://www.bleepingcomputer.com/tutorials/tutorial145.html
and that is how do to recover the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial144.html
and here is the information of microsoft in restoring a system image backup
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup
-
No sound after audio driver update
sounds on my pc
Hello, after installing a driver realtek hd audio (new)
I couldn't hear anything on my pc, I used wht I have seen that a windows audio driver need help thank you
Try to roll back the driver to the one who used to work as follows: http://www.howtogeek.com/howto/windows-vista/roll-back-troublesome-device-drivers-in-windows-vista/.
Then go to the manufactuerer of computer or the manufacturer of your audio device (if it came with the computer) ane search for updated drivers and be ABSOLUTELY sure that they are those of your audio device, AND they are compatible with your verision of Vista. Then you can try to install these updates to see if they work. If the same problem occur, then for some reason, these drivers do not work with your system and rollback again the one who worked and that you shouldn't use them.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
No sound after Service pack 3 on my Windows Xp
After that I installed Service pack 3 and rebooted my computer widows, I lost my audio. I can not get to play any audio at all through my speakers or headphones. It was working fine before the update, can anyone help me fix?
How do I know if the computer is fully corrected: Open Internet Explorer (only) tohttp://windowsupdate.microsoft.com . Select CUSTOM and scan | Install all security critical updates available (e.g., KB2416400;) KB2419632; KB981852). If an update of root certificates is listed (possibly in the category of the optional software updates on the left side of the scan results window), install it to enjoy enhanced Internet Explorer security.
Assuming all goes well, please start a new thread in this forum for appropriate assistance: http://social.answers.microsoft.com/Forums/en-US/xpmusic/threads
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
No sound after installing critical updates - Windows 7
Just bought a Toshiba P505D running Windows 7 on Sunday. I then installed the 2007 Microsoft Office Suite. Windows auto-intalled a lot of updates, Monday night and then after updates the sound has stopped working. Toshiba has helped me solve the problem and it is not a hardware problem. They had me then restore the system settings before updates of Windows and the sound is working again. Now I'm nervous about the installation of the updates. Anyone aware of this problem and how do I install the updates and keep functioning? Thank you!
Hi BoonieBoy,
This could be a problem if one of the update is causing the problem. I suggest that you install update one by one to see which update is the culprit that is causing the problem.
1. open Windows Update by clicking the Start button, all programsand then click Windows Update.
2. click on the option to change the settings in the left navigation bar. You will now be on a screen where you will be able to set up how to download and install the updates on your Windows 7 computer
3. Select the updates but let me choose whether to download and install them. When you have finished setting options that you want, press the OK button to save these settings. You will now be at the main screen of Windows Update.
4. in the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.
5. you can then download the updates one or both.
6. now install a patch at a time and restart the computer after the installation of each update.
7. Repeat steps 5 and 6 until you get all the updates you want on your PC.
It is about what update is causing the problem. Provide the number of the update.
Thank you, and in what concerns:
Swathi B - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Sound after Vista->; downgrade XP on Satellite M100 problem
My laptop is Toshiba Satellite M100. After bios upgrade (5.10-> 2.80) and downgrade OS (Vista-> XP) I have a sound problem.
There is not a sound from the speakers. But the line out (headphone) sound is ptesent.
I use drivers sound card for XP on the official website. Any ideas?Hello
There is a good solution for your problem.
Go to this site:
www.Realtek.comand download the sounddrivers from there. In any case, they work perfectly since they are native drivers for this chipset.
Welcome them
-
Qosmio F30-147 - no sound after Vista upgrade
I recently upgraded my Qosmio F30-147 of Windows XP MCE to Vista Business. I downloaded and installed almost all drivers available on the download page of Toshiba (including the update of the BIOS). Everything works fine but the sound. The SigmaTel High Definition Audio CODEC is the only "peripheral" listed in Device Manager. I have installed and uninstalled the SigmaTel driver available (version: 6.10.5462.0) several times without success. You have any ideas?
Very strange! You have installed all the stuff with command described in the document instructions facilities facilities?
Maybe you are looking for
-
AutoFill password problem.
iPad mini 3 using a Logitech keyboard. Before the 9.3.1 set to update when you use the external keyboard & wish details of AutoFill on Web sites, there will be a small popup at the bottom of the screen (which appears on screen keyboard) giving the au
-
A couple of months, I forgot that I had left my computer on when I'm gone for browsing the web. When I came back a few hours later it pop ups promote pornographic sites on the screen. Firefox has been locked and I had to "leave power." Since then, I
-
MacBook Air 11 '' lag and overheating
MacBook Air (11 inch, early 2015) Processor: 2.2 GHz Intel Core i7 Memory: 8 GB 1600 MHz DDR3 Storage: 500 GB Flash Mac OS X 10.11.2 I got this macbook air for a few months and quite a lot of 1 day that I had to deal with a boring case of keyboard la
-
Continuous DAQmxCreateCOPulseChanTicks task
Hello When I start the DAQmxCreateCOPulseChanTick task it is not continuous, it works only once. How to continuously without start and stop the task within a certain time, because in this solution, it takes a lot of time. I want to start the task onc
-
Y at - it a program that will help me to document all my bills and receivables for my CFO
I am the owner of a small business (1 person) trying to prepare all my bills - account numbers, web sites and access to invoices, the dates due, how bills are paid - and my debts for a new CFO, so it can take over the management of my company, pay my