R415 with Opteron 4200 series problem

Similar Questions

• Collection with Satellite A200 series problem

  Hello

  I had problems at the start of Windows Vista. It does not run in any mode. When I try to recover (by pressing '0' to the screen, that nothing is happening).
  I used my recovery disks to restore the operating system. They run for awhile, and then a white screen comes up and it stops. Then I get PXE: memory, disk failure check cable.

  Finally, with some trial and error I could finally launch the recovery disks, when I try to recover with the factory settings it will stop with disc 2 does not end copy the files. Then I had to recover without recovery partition. After finishing, I found that it loaded Windows XP not Windows Vista. Where did Windows Vista go and how can get it back.

  Please someone help me with this problem.

  Thank you

  Hmmm... What Satellite A200 do you have exactly?

• S205 Lenovo with RaLink 3090 series wifi adapter problems - update driver 3.2.1 solve?

  Hello.

  I just got the Lenovo S205 with RaLink 3090 series wifi card and had a steady decline until I downloaded the Version 3.2.1 update which was included in the link for the 309 X (X being 0 for me for my wifi card) software/drivers on RaLink site, under the Help menu.

  Go to ralinktech.com and go to Support > downloads > Windows and you will see a list of several RaLink devices which include the adapter X 309. I chose to download/install the full utility with the driver. I remember well, it may be more 28 megabytes.

  I hope it works for you!

  Update:

  I uninstalled the RaLink wireless utility that came with the 3.2.1 pilot, but it uninstalled the driver too. Then I reinstalled and activated the option "install driver only", went into the control panel > hardware and audio > Device Manager > network adapters >

  RALink RT3090 802.11n WiFi adapter > double-click to open the properties > power management tab > uncheck "allow this computer to turn off device to save energy ', 'OK', close and restart programs.

  So when I start or wake the system from sleep, I click the Wireless connections icon in the lower right (next), bar and then click on the link that I want to connect, and then click 'Connect' While it takes 8 seconds to connect, it is worth MUCH more that to have the connection drop constantly, and I probably reboot my system only once when he didn't to reconnect out of a State of sleep.

  I had a MUCH more homogeneous behaviour since this change, and I hope it works well for you too!

• CFMX 8.01 Enterprise with Opteron 64-bit on Windows 64-bit

  We have to buy a new web server, and I was looking at a Dell machine with Opteron 2 x 64-bit processors.
  
  As of today, will be what Enterprise 8.01 CFMX works in 64 bits with these processors? The operating system is already 64-bit Windows Server 2003 or Windows Server 2008 64 - bit edition... which is not going to be a UNIX or Linux machine.
  
  One of our main web sites did a lot of calculation and analysis of data, so I am not sure that runs in native 64-bit should increase our performance to 15% just for that (instead of 32 bits).
  
  I read in (few months) the messages that the JVM on windows series, or is supported in 32 - bit only? Is this always true since CFMX Enterprise 8.01 is supposed to be fully 64-bit? On the product of CFMX they don't talk about chipsets Intel 64-bit... no words on AMD Opteron 64-bit.
  
  Thank you very much!
  
  
  
  Patrick
  

  Patrick,

  This should help:

  http://www.Adobe.com/devnet/coldfusion/articles/64_bit.html

  And the company must run on these operating systems.

  http://www.Adobe.com/products/ColdFusion/systemreqs/

  http://www.Adobe.com/products/ColdFusion/PDFs/cf8_featurecomp.PDF

  --
  Ken Ford
  Adobe Community Expert - Dreamweaver
  Fordwebs, LLC
  http://www.fordwebs.com

  "patrickinmtl" wrote in message
  News:fufnkj$6N1$1@forums. Macromedia.com...
  > You have to buy a new web server, and I was looking at a Dell machine with
  > 2 x
  > 64 bit Opteron processors.
  >
  > As of today, will that company 8.01 CFMX works in 64-bit with these
  > processors?
  > The operating system is Windows Server 2003 64-bit OR Windows Server 2008
  > 64 bit
  > edition... which is not going to be a UNIX or Linux machine.
  >
  > One of our main web sites did a lot of computation and data analysis
  > so I
  > know with certainty that running in native 64-bit should increase our
  > performance by
  > 15% just for that (instead of 32 bits).
  >
  > I read in (few months) the messages that the JVM on windows series, or is
  > support, 32 bit only? That is even true if you consider that CFMX 8.01
  > Enterprise is supposed to be fully 64-bit? On the product of CFMX
  > they
  > talk of chipsets Intel 64-bit... no words on AMD Opteron 64-bit.
  >
  > A big thank you!
  >
  >
  >
  > Patrick
  >
  >

• I have a partitura with 18 instruments. Problem is that only 16 of the sheed. How can I vertically down the music?

  I have a partitura with 18 instruments. Problem is that only 16 of the sheed. How can I vertically down the music?

  Make a score set with 18 all instruments. Then use the scale parameter set score to all fit on a single page.

• I'm having problems to connect to internet with my iMac, no problems using my macbook pro in the same room, also see other peoples wifi appearing

  Having problems connecting to the internet with my iMac, no problems with my macbook pro in the same room, also seem to be picking up another Wi - Fi connection to others

  Go to > use Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support

• Charger Port with HP Slate 7 problems

  I bought the 7 Slate with Beats Audio May 19, 2014. I use the device for work and have video and photos stored on it. Last night the device was low on battery so I plugged in the charger and went on to have a conversation in an e-mail program. And without warning. the unit turned off and only would be cooler. I checked the charger on another device that takes the mini-usb, and it works fine. Use another charger and also directly from my office. Nothing. So, this morning, I get the question and found this forum.  Not very encouraging to see so many comments about it.

  This device is less than a month, and I got him with a lot of tenderness, never fell, only not negligent on the load, or the cord. Yet here I am without my camera and unable to use for my meetings. Cannot get my sync applications, such as e-mail, storage, ect.

  So I called HP Support at 1-800-474-6836 and reached (Ben), me who gave me the standard excuses, transferred to a supervisor (Lexi), who created the wait to be contacted by a case manager within 48 hours. I was told that this person, once they contact me, will offer the best solution to solve the problem and return the unit to me or replace it. I was given a case number and am waiting for the call.  It occurs to me that if there is that a lot of problems with the charger port, that the company should already obtained before this problem and had a dedicated support to maintain the retention. My time is precious, like everyone else! I understand that my product is under warranty, and there is a process to resolve these issues. But when these factories will understand that it is more than an inconvenience when they design and sell defective devices? My Home Office everything is lined with HP hardware. My only loyalty should be of significant value for them.

  So I am writing this message to maintain continuity with this community, and HP doing to address this issue. Make sure what I'm going to share the results, whether good or bad. And as a former journalist, who does not hesitate to produce a video describing this experience, knowing very well how to avoid libel and defamatory statements.

  Technology companies have made the fortune of products driven by the needs of consumers and of course the almighty dollar. But seems that has more NO integrity in the prevention of these problems don't occur in the first place. And once they do, consumers are reduced to a minimum, having to go through the hoops to just to be able to use a product they paid for. Prove me wrong! You want to be a leader in the industry? Show me things beyond to satisfy your base.

  I will update this issue as soon as I have something else to the case.

  Thus, an update!

  After a few messages for me that my information was sent to the front. I got a call from (M Miles) Corporate Tuesday afternoon. (Same day)  And after a long discussion on my frustration, both with regard to the problem happen with any replacement.  I agreed to let them replace the device with the slate update 7 beats Special Edition. I sincerely believe that Miles was friendly to my problem and that he would do everything he could to resolve the issue and keep my business of loyalty.

  I was expressing my concern that anyone would after learning that he is a typical problem for the type of charger Port.  If there is a known issue, why use this type? Find a more stable tool, so save the company, but also consumers headaches of loss and replacement altogether.

  I'm looking forward to having a device back in my hands for the work I do. Not a toy for me! If there are other problems with replacement. I'll revisit this post and report it.

  With respect in Miles and anyone who touched the case... Thank you for your prompt and considerate back how to solve my problem. I can't wait to receive my new camera, with fingers crossed. I never wanted another product in addition to HP.

• I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard

  I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard.
  Vista makes my headphones 'speakers', so when I use a program called ventrilo to talk with other players in my game sounds are heard through ventrilo. My headset is a headset/microphone generic plug-and-play.

  When I run not WoW, I can hear my own voice through the headset speakers when I talk.

  I want my headphones to work so I can hear my friends talking and the sounds of the game, but I don't want the game sounds to be filtered on the server for voice chat

  Any help would be much appreciated. I asked the same question to Geek Squad and their response has been to try to charge me $49.99 + tax for one of their "agents" can remote in and fix it. Do not use them unless you have: P

  Hey CassiusVa,

  Welcome to the Microsoft Answers Forum!

  Since when are you facing the issue?

  Can I know the version of Ventrilo you use on your computer?

  It may be that World of Warcraft focuses on your audio hardware.  You can try to reduce the audio settings in WoW to see if this makes the use of Ventrilo better.  It may also be a driver problem.  I would check to make sure that you have the latest drivers for your audio device.

  Use the following steps to ensure that the audio drivers are up to date.

  1. connect to the Internet.

  2. click on start and enter the Device Manager in the start search field.

  3. click on the plus sign next to sound, video and game controllers.

  4. right click on the name of the sound material and select software update of the driver...

  5. click on search automatically for a driver updated and wait for Windows to update the driver software.

  6 Windows checks a remote Web site to see if the update of the driver software is available.

  * If an update is available, let Windows install the update.

  * If an update is not available, proceed to the next step.

  7. once the update is successfully installed, test the microphone.

  Please follow the steps below and check if you still have questions echo.

  Go into Ventrilo Setup and select mixer for the sound card, which will be the audio input (as determined by the "Input device" option) device. This will populate the Mux and line options. Normally it would take only a Mux. It is possible that you may have many options of the line. Go ahead and select "Microphone" or anything that is appropriate for the input line and then click OK.

  This should solve the problem.

  Please note that you select mixer, mux and line will allow the "Hardware Volume" slider This gives you the control hardware on the audio input signal and is the best way to control how strong you are. Setting the cursor to halfway better seems to work for most people, but it will be hardware and system load.

  You can also browse the links for more information on ventrilo and try to contact them if the problem persists.

  http://www.Ventrilo.com/FAQ.php

  http://www.Ventrilo.com/about.php

  http://www.Ventrilo.com/dlprod.php?id=1

  Let us know how it works.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Faced with the simple series comms

  Hi all - summer tweak something that should be simple for hours now, so I'll ask for help...

  I have a RS485 device connected to COM5 via a USB adapter, work at 9600 baud, 0,8,1, no - fundamentals of series. I can talk to the device using the terminal software native and even using hyperterminal with the above parameters. It seems obvious, and so I thought that LabVIEW and VISA would connect without too much effort.

  So I use the following simple sequence into LabVIEW:

  -VISA set up the serial port, 9600,0,8,1, none (no error)

  -VISA defined the size of buffer, 4096 with a mask of 48 (no error)

  -Stamps of Ras VISA, the two buffers (no error)

  -VISA write, chain of command is 'PR C2\r\n", which should be echoed and return a numeric value (normally 0)

  -check the bytes to the port property; returns 12

  -VISA read, returns the string of command only, 7 bytes

  why I can't read the full buffer?

  To be honest, I thought that it will work only with a trivial series program: set-read-write. But which still generates an error. I added the size of the buffer since then do a little research and makes without error at least, if not in one of the published examples.

  I don't think it's a matter of time, since I add a lot of late, when I'm debugging, and I tried to put delays read before. The fact that the number of bytes in the buffer is 12 seems to indicate that my answer is here somewhere...

  I also tried a second reading, but it returns nothing.

  Kind regards

  Lamb

  Just disable the tank of the termination.

  This is the reason why you get only one line.

  Or do a second reading at the end.

• I have problems getting into eprint because I had registered with aol. Registration problems.

  

  Not sure why registering with aol would cause problems when you try to create an ePrintCenter account. Have you ever had a Snapfish account? If that could be causing a conflict and you must register to ePrintCenter using the same email/password credentials that you used with Snapfish. If you are not sure, try logging on to Snapfish (Snapfish login) with the e-mail address you have tried with ePrintCenter and choose her you forgot your password. If she confirms that an e-mail has been sent to you with password reset instructions and then reset the password and uses it and the e-mail address to create your new account ePrintCenter.

  If you have never had a Snapfish account and record ePrint is a failure because it claims that the email address is already in use then you just create your EPC account using an alternative email address.

  Hope this allows you to get to market soon.

• Subscribe with photoshop, but the problem is when I type in Arabic, letters are not connected they are supposed to be, please help me solve this problem?

  im a student in Visual design and currently I'm designing with Arabic typography, the problem is when I type the letters in photoshop are not connected. I tried many ways, but it seems that its does not work!

  Help, please

  Hello

  I tried many ways, but it seems that its does not work!

  What have you tried?  In preferences > Engine Options choose text (try Middle Eastern)

  Or select your text box and in > 'Characters' Panel, choose your language.

  Stone

• I lost my photoshop elements 8 with windows after a problem with my computer. I have my serial number and that you cannot use my cd.  How can I download this version?

  I lost my photoshop elements 8 with windows after a problem with my computer. I have my serial number, but cannot use my cd. How can I download this version?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• I use a PC and I used LR3. I'm a newcomer to LR, so patient with me! My problem is related to the import function. I have a photo library on an external hard drive. I slowly imported previews of the photos selected from the library in

  I use a PC and I used LR3. I'm a newcomer to LR, so patient with me! My problem is related to the import function.

  I have a photo library on an external hard drive. I've slowly been import previews of the photos selected from the library in my catalog, adding them during the import process - well. But now, I hit a problem. Another folder in my library contains several subfolders, each containing a number of photos (a mixture of RAW steals (naves) and jpg). I was importing found in my catalog each Subfile in turn, using the Add function, usually of the jpgs only from each Subfile. It works fine, until I reached a particular Subfile. For some reason when I try to import from it and select the secondary file as a Source, only the RAW (NEF) images appear in the preview pane (sorry, forgot the correct term for it!). I know that jpg files are in this auxiliary file on the external hard drive, because when I view its content in Windows, they are all there. But try as I can (choose the file under source, select the folder parent as a source, try to copy or move them, instead of adding them), nothing seems to work. Since they do not appear in the preview pane, I can't import them. It does appear that this a Subfile where the problem exists, but I don't see anything that is different from the others (names of files under all use the same structure - yyyy-mm-dd_custom name, and pictures in all subfolders are adopting the same denomination structure too - yyyy-mm-dd_sequential number_custom name.) NAVE/JPG. So what I am doing wrong? Any ideas please.

  It is possible that the images in this particular subfolder were taken in your camera in RAW + JPEG.  If so, you will need to go to preferences under the general tab and make sure the box "processing JPEG files files next to raw as separate photos" is checked.

  

  However, assuming that this is the case, there is really no reason to import the JPEG file if you already have the RAW file.

• Adobe Reader 5.0 with Windows 7 compatibility problem

  Adobe Reader 5.0 with Windows 7 compatibility problem

  version 5?

  use the most recent Adobe Acrobat Reader DC install for all versions

  Clear mcafee, unless you are sure you want.

• Html with jquery content integration problems

  Hey people muse.

  I am currently struggling with a very annoying problem:

  I have a piece of html code with jquery bits in there (it is a plugin to 360 °). For some reason, it doesn't seem to work when I upload it to my server and try it.

  I tried the steps suggested in this thread: HELP! Add Jquery to Muse! , but whenever I remove the parts of the "JS Include" section, I get warnings and errors in the page. The plugin works, even if...

  Does anyone know a workaround on this one?

  Thanks in advance

  Hi Florian.

  The trick is to wait for the page to load, then call your Jquery dependent scripts. That being said, try to insert this code in 'properties-> metadata-> HTML to head Page'-->

  And insert this code via "object-> Insert HTML code '-->

  

  Class = "spool".

  ID = 'image '.

  image data = "images/bild # .jpg".

  data-cw = 'true '.

  Framework data = '36 '.

  data-length = "6".

  data / speed = '3 '.

  data-speed =-'0.2 '.

  data-brake "0.2" = >

  Please choose a product:

  Type 1

  Type 2

  I would like to know if it works for you.

  - Abhishek Maurya