R420 server port idrac

Similar Questions

• With the help of v31.4.0, anyway I can designate the server ports as 110 and 25 instead of 110 and 587 for Bitdefender anti-spam?

  Thunderbird server ports won't allow to 110 and 25, only 110 and 587. Any suggestions?

  Go to the account settings-> settings for outgoing (SMTP) server and highlight the name of the server; then click on change. You should be able to change the port there. 25, 465, 587 and 2525 ports are all possibilities.

• Cannot find the .inf to install HP 5600 print server port

  I try to add a server port to print to my printer HP 5600 on Win 7.

  Go to "Properties of the print server" select port and get message 'new port type' print server ' food printer inf to install the port monitor intilation information. »

  Cannot find the INFs on any CD progrm supplied with the printer.

  How can I add a 'print server port' to the printer if my USB Linksys printserver. This print server works fine on my other computers on my home network.

  Finally found how to manage the Linksys. You must set up a TCP/IP port not a port of the print server.

  Link http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=22034

  complete set upward for win 7

  Bob

• Configuration of a port as 'server port' in UCS FI 6120

  Hi all

  It is a fundamental question. If any user of UCS can kidly help me by providing a checklist for setting up a server in the UCS port, I will be grateful.

  What I've been running a port as the port of the server using the UCS Manager and nothing more. Then I connected the ANC of 10G from the server to this UCS FI. FCoE login never happened. My setup is slightly different from that of a regular system of UCS as I am trying to connect a stand-alone server to the UCS IF instead of use the chassis. Please visit https://supportforums.cisco.com/thread/2117756?tstart=0 to learn more about this topic.

  Looks like these server ports are the ports of junction and can carry any traffic VLAN? So why not FCoE VLAN? Why no "announcement of the discovery? I hung a finisar and don't see something specific protocol FCoE from port of the server.

  Any help is appreciated.

  Thank you

  Niranjan,

  It might help to take the steps that need to occur when you connect a 10G ANC to Nexus one N5K.

  In order to get a CF on a N5K virtual connection, the following steps of the manuals must be made:

  (1) create a vfc and bind it to the physical interface where the ANC is attached

  (2) create a vlan and vsan and associate the vlan for the vsan fcoe

  (3) place the vfc in the vsan created in step 2 above

  Once these steps are completed, and a couple of closing/No.-stops, you will get a vfc on the N5K flogi.

  When you create a Service in UCSM profile and associate with a blade with an ANC, UCSM performs all these tasks for you. If you dig into the system, you will see the vfc and veth that were created for your SPs.

  Without a SP and UCSM to manage the port of the server, any of these steps occur, and you will not get a flogi. There is no method to manipulate UCSM to perform what you're trying to do. It is not in the current design of the product.

  The only supported method to attach a rack CSeries server to a cluster UCSM is using the integration of the C-series features and the necessary equipment (FEX)

  I hope this helps.

• Configuring the additional server ports

  Hi, if I use 2 ports per chassis of the server and want to add another 2, in addition to plug the cables and the settings, on the interconnection ports to "Set up as a Server Port" y at - it something else which is necessary and there is no interruption of traffic?

  Hello David,.

  If the links between IOM and FI server ports are individual links, then you will recognize the chassis to initialize the new links. This will cause disturbances of the network for a few seconds.

  There is no need to re - recognize the chassis if there is a channel of port of fabric between the IOM and FI.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/GUI/config/Guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0101.html#concept_5D3D88341BFB43468B62B5A77876C67B

  HTH

  Padma

• Can I configure some ports on FI-6200UP GEM as server ports?

  Hello

  I need your help!

  I know that FI-6100 can't be configured its some port on GEM as the server ports.

  Is it possible to configure ports on FI-6200UP GEM server ports?

  And I wonder too, some ports(1/9-16) on a (Second) group of port can be configured as a server port(1/9-10) port(1/11-12) ethernet uplink, FCoE port(1/13-14) and FC port(1/15-16).

  Thanks in advance.

  Paul

  Hello Paul,

  Yes, you can configure the server ports on expansion on FI 6200 series modules.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/GUI/config/Guide/2.1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_0110.html#concept_A552AD7757A549FB82D16A07D0EDA1E4

  --------- snip ------------

  All port types shown are configurable on both the module fixed and expansion, including the server ports that are not configurable on the fabric of the 6100 Series expansion module for interconnection, but can be configured on the fabric of the 6200 series expansion module interconnection.

  ----------------------

  HTH

  Padma

• FI 6296: Server Ports module extension?

  Hello

  I have read

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/CLI/config/Guide/2.0/b_UCSM_CLI_Configuration_Guide_2_0_chapter_0101.PDF

  Server ports

  Ports on the server to manage data traffic between the interconnection of fabric and maps on servers.

  You can only configure ports of server on the fixed port module. Plug-ins do not include the server ports.

  means I can use just 48 port fixed module to connect the chassis. If I want to connect 4 link to the IOM 2204, I can connect only 12 chassis?

  I do not understand this limitation...?

  Thank you very much

  Nicolas.

  Hello Nicolas,.

  You can configure ports on expansion as 'server port' type modules in the 62XX FI series.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/GUI/config/Guide/2.1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_0110.html#concept_EBA4291165434774AB50F91C74633538

  ------------ snip ------------------

  All port types shown are configurable on both the module fixed and expansion, including the server ports that are not configurable on the fabric of the 6100 Series expansion module for interconnection, but can be configured on the fabric of the 6200 series expansion module interconnection.

  --------------------------------------

  HTH

  Padma

• Clowd control Admin Server Port used

  Hello

  I set up a Test System of control of running 12.1.0.2 and Orcle Linux 6.6 Clowd.

  If the judgment of the instance (which takes a lot of time) that I will meet him this message:

  Admin Server Port is occupied by anoter process. Please stop the process to free the port.

  However, I don't know what process could cause this. The Port of Eastern system complains about is 7111

  He also makes note that Oracle Management Server is not functional.

  I heard that nodemanager and manage servers could use the same Port

  However, how can I know if this is the case - and if yes: How do I solve this problem?

  Sorry, I really tried to get the manuals ;-)

  Concerning

  Christian

  Hi Christian,

  I think that you run the automatic start/stop of the SGD application using init.d run level in your environment.  To answer your question

  (1) officer doesn't shoot to the top of the starting agent WHO. And if SGD is down, agent will continue to operate, but there not all heart beat at Stargate Command and it will download all the data to WHO.

  (2) is not necessary, but it depends on up to customer's requirement on the way to the startup/Shutdown EM under the server restarts. Some customer wants to start service EM manually after the server restarts, and some would start automatically as part of the reboot of the server. We support both the path and there is no restriction in using both methods.

  Thank you

  Sumesh.

• How to get the server port in the operation of the component.

  Hi all

  How can get port information no server in what component work.

  You can get by using sharedObects

  see this

  http://www.techartifact.com/blogs/2013/10/get-intradoc-server-port-in-custom-component-in-WebCenter-content-UCM.html

• problems with the IPCC monitoring server port

  I have 4.0 (4) IPCC Express Premium with Call Manager 4.1 (2). I have a server with two NIC a 'normal' IPCC and other oversight bodies. I have configured the port monitoring with a few other IP (172.16.255.10/24) and I set up RSPAN on switches. I see a call between officers and the appellants.

  But, after a reboot of the server, I get the error that my server will stop after a minute. I cann't see ane packages from monitor port. When I disable the port monitor and restart the server everything is OK and then I can activate the monitor port and everything is OK.

  I have nothing in the registry settings.

  What should do?

  Thank you

  I had the same problem as you and this has solved my problem.

• increase the UCS blade server port

  Hello world

  I have a client with the following UCS environment:

  2 FI 6120

  2 chassis 5108

  6 B200M2

  Each chassis 5108 have 2 Fex 2104 and each 2104 a 2 10 G (cable Twinaxial) a link to each fabric Inteconnect 6120.

  If we increase the number of Serverport for each chassis 5108 from 4 to 8 (each fex will be 4 uplink), could we destroy the traffic to the blade?

  Is there a better procedure for this activity?

  Concerning

  Dino

  Hi Dino,

  I'm not sure what you mean exactly by destory traffic towards the blades? Are you talking about any loss (eth and fc) connectivity for the blades for this upgrade activity? If so yes there will be. You can connect the cables between the FI and the IOM and the same brand, that ports are srever ports having no impact, but you can use the new links you will need to re - emphasize the chassis which is a disruptive process and trigger a restart of the blades.

  As for the procedure:

  (1) connect the ports between IOM and YEW,

  (2) mark ports on the FI as ports on the server,

  (3) re - ack frame that has these new ports configured (as mentioned, make sure that the blades on the frame are closed before you re - ack)

  I hope this helps!

  . / Afonso

• Cisco UCS Server - Port HDMI

  Cisco dear team,

  One of our customer asked for a HDMI Port on Cisco's UCS servers.

  Can someone help me with this please?

  In the affirmative, please let me know in which Cisco UCS Server is available?

  Kind regards

  Farhan.

  As far as I know, none of the UCS servers have an HDMI port.

• 4 GB with Etherchannel connected to a Dell server ports

  Hello

  I need to connect 4 physical 1 GB of a switch port 4500 for a dell with the team server.

  The thing that is not working, I tried to put the traffic with the iperf and never goes more than 1 GB

  All suggest? Thank you!

  the configuration below:

  interface GigabitEthernet6/38
  switchport access vlan 26
  active in mode channel-group 3
  spanning tree portfast
  end

  (ditto for the 4 ports)

  !

  Interface Port-canal3
  switchport
  switchport access vlan 26
  end

  !

  port-channel - the balance of the CBC - mac support
  Interface Port-canal3
  Interface Port-Channel 4
  active in mode channel-group 3
  active in mode channel-group 3
  active in mode channel-group 3
  active in mode channel-group 3

  !

  RO. CPD. CR # see the etherchannel 3 Summary
  Flags: - Low P - D bundled in port-channel
  I have - autonomous s - suspended
  R - Layer 3 S - Layer2
  U - running f - cannot allocate an aggregator

  M - don't use, minimum contacts not satisfied
  u - unfit to tied selling
  w waiting to be aggregated
  d default port

  Number of channels in use: 2
  Number of aggregators: 2

  Protocol for the Port-Channel port group
  ------+-------------+-----------+-----------------------------------------------
  3 Po3 (SU) LACP Gi6/38 (P) Gi7/12 (P) Gi7/45 (P)
  Gi7/46 (P)

  ro etherchannel load-balance. CPD. CR #Show
  Load balancing EtherChannel Configuration:
  CBC - mac

  EtherChannel load balancing address by protocol used:
  No - IP: Source MAC address
  IPv4: Source MAC address
  IPv6: Source MAC address

  How do you send the traffic? From a PC connected to Cat4500 or have iperf running on Dell Server?

  What happens if traffic beyond 1 G, it starts that drop packets? What kind of traffic drive you to iperf?

  See you soon,.

  -amit singh

• How do I know the admin for weblogic server port

  I have Oracle Weblogic server installed on my Windows 7 machine. I want to know if the server is running and which is the port of admin for him. Can someone guide me?

  the default is 7001. If the weblogic administration console is accessible by http://localhost:7001 / console

  If weblogic is installed you will have weblogic home i.e. middleware... you can check that... These are all default values and can change according to the approx... but usually these things by default.

• Forms/connectivity server ports

  Hello

  I am looking for more information on Forms Server:

  Our environment consists of two servers - a base of data/simultaneous Manager and another with web.

  When the forms runtime treats work?

  What are the ports it uses?

  And what are the ports that it uses to communicate with forms Servlet listener?

  Thank you!

  When the forms runtime treats work?

  Depending on your configuration, very probably, it is running on the other node (node of the web) - how to find the number of forms process in R11i & R12? (Doc ID 748314.1)

  What are the ports it uses?

  And what are the ports that it uses to communicate with forms Servlet listener?

  Use ps (ps - ef | grep forms and ps - ef | grep frmweb) and netstat commands.

  Concepts of Oracle E-Business Suite

  Thank you

  Hussein