FI 6296: Server Ports module extension?

Similar Questions

• Can I configure some ports on FI-6200UP GEM as server ports?

  Hello

  I need your help!

  I know that FI-6100 can't be configured its some port on GEM as the server ports.

  Is it possible to configure ports on FI-6200UP GEM server ports?

  And I wonder too, some ports(1/9-16) on a (Second) group of port can be configured as a server port(1/9-10) port(1/11-12) ethernet uplink, FCoE port(1/13-14) and FC port(1/15-16).

  Thanks in advance.

  Paul

  Hello Paul,

  Yes, you can configure the server ports on expansion on FI 6200 series modules.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/GUI/config/Guide/2.1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_0110.html#concept_A552AD7757A549FB82D16A07D0EDA1E4

  --------- snip ------------

  All port types shown are configurable on both the module fixed and expansion, including the server ports that are not configurable on the fabric of the 6100 Series expansion module for interconnection, but can be configured on the fabric of the 6200 series expansion module interconnection.

  ----------------------

  HTH

  Padma

• With the help of v31.4.0, anyway I can designate the server ports as 110 and 25 instead of 110 and 587 for Bitdefender anti-spam?

  Thunderbird server ports won't allow to 110 and 25, only 110 and 587. Any suggestions?

  Go to the account settings-> settings for outgoing (SMTP) server and highlight the name of the server; then click on change. You should be able to change the port there. 25, 465, 587 and 2525 ports are all possibilities.

• When I go to tools > Add-ons, nothings shows under modules, Extensions, etc.

  The clickable element only it is "check for updates". All my modules work, but none appear. Even for Extensions, appearance, Plugins, Services.

  I don't know how long it was, because I had no need to check until last Friday, when I picked up some malware that slides open a tab on the right side of my screen with 'Hot Deals' on it.

  Option "Automatically add" Firefox tells me listed below are my modules (if I can't see them in my own tab modules). There are several here that I recognize at all, but I don't know how I can delete them without that page loading properly.

  Using Firefox 25.0.1 with Windows 7

  • Google update
  • Shockwave Flash 12.0 r0
  • The QuickTime Plugin allows you to display a wide variety of multimedia content in Web pages. For more information, see the Web of QuickTime site.
  • iTunes plugin detector
  • 5.1.30214.0
  • Plugin Picasa
  • Deploy Script NPRuntime plugin Library for Java (TM)
  • Shockwave Flash 11.9 r900
  • GEPlugin
  • RealPlayer LiveConnect-Enabled plug-in
  • Download the RealPlayer Plugin
  • RealNetworks (tm) Chrome RealDownloader background plugin Extension
  • RealNetworks (tm) RealDownloader PepperFlashVideoShim plugin
  • RealNetworks (tm) RealDownloader HTML5VideoShim plugin
  • RealDownloader Plugin
  • Adobe PDF plugin for Firefox and Netscape "9.5.5.
  • Nitro PDF plugin for Firefox and Chrome
  • NVIDIA 3D Vision plugin for Mozilla browsers
  • NVIDIA 3D Vision streaming plugin for Mozilla browsers
  • Amazon MP3 Downloader Plugin 1.0.17
  • Detector of presence of WildTangent Games App V2
  • Detection of the Logitech devices
  • RealNetworks (tm) Chrome RealPlayer background plugin Extension
  • RealPlayer Plug-in HTML5VideoShim
  • NPWLPG
  • Windows Activation Technologies Plugin for Mozilla

  Thanks for any help you can offer.

  If it works in Mode safe mode and normal mode with all extensions (Firefox/tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit)

  • If you have many extensions then first turn on half of test extensions that half the problem.
  • Continue to divide the bad half that still has the question until you find that one is causing it.

• Cannot find the .inf to install HP 5600 print server port

  I try to add a server port to print to my printer HP 5600 on Win 7.

  Go to "Properties of the print server" select port and get message 'new port type' print server ' food printer inf to install the port monitor intilation information. »

  Cannot find the INFs on any CD progrm supplied with the printer.

  How can I add a 'print server port' to the printer if my USB Linksys printserver. This print server works fine on my other computers on my home network.

  Finally found how to manage the Linksys. You must set up a TCP/IP port not a port of the print server.

  Link http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=22034

  complete set upward for win 7

  Bob

• Configuration of a port as 'server port' in UCS FI 6120

  Hi all

  It is a fundamental question. If any user of UCS can kidly help me by providing a checklist for setting up a server in the UCS port, I will be grateful.

  What I've been running a port as the port of the server using the UCS Manager and nothing more. Then I connected the ANC of 10G from the server to this UCS FI. FCoE login never happened. My setup is slightly different from that of a regular system of UCS as I am trying to connect a stand-alone server to the UCS IF instead of use the chassis. Please visit https://supportforums.cisco.com/thread/2117756?tstart=0 to learn more about this topic.

  Looks like these server ports are the ports of junction and can carry any traffic VLAN? So why not FCoE VLAN? Why no "announcement of the discovery? I hung a finisar and don't see something specific protocol FCoE from port of the server.

  Any help is appreciated.

  Thank you

  Niranjan,

  It might help to take the steps that need to occur when you connect a 10G ANC to Nexus one N5K.

  In order to get a CF on a N5K virtual connection, the following steps of the manuals must be made:

  (1) create a vfc and bind it to the physical interface where the ANC is attached

  (2) create a vlan and vsan and associate the vlan for the vsan fcoe

  (3) place the vfc in the vsan created in step 2 above

  Once these steps are completed, and a couple of closing/No.-stops, you will get a vfc on the N5K flogi.

  When you create a Service in UCSM profile and associate with a blade with an ANC, UCSM performs all these tasks for you. If you dig into the system, you will see the vfc and veth that were created for your SPs.

  Without a SP and UCSM to manage the port of the server, any of these steps occur, and you will not get a flogi. There is no method to manipulate UCSM to perform what you're trying to do. It is not in the current design of the product.

  The only supported method to attach a rack CSeries server to a cluster UCSM is using the integration of the C-series features and the necessary equipment (FEX)

  I hope this helps.

• Configuring the additional server ports

  Hi, if I use 2 ports per chassis of the server and want to add another 2, in addition to plug the cables and the settings, on the interconnection ports to "Set up as a Server Port" y at - it something else which is necessary and there is no interruption of traffic?

  Hello David,.

  If the links between IOM and FI server ports are individual links, then you will recognize the chassis to initialize the new links. This will cause disturbances of the network for a few seconds.

  There is no need to re - recognize the chassis if there is a channel of port of fabric between the IOM and FI.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/GUI/config/Guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0101.html#concept_5D3D88341BFB43468B62B5A77876C67B

  HTH

  Padma

• Clowd control Admin Server Port used

  Hello

  I set up a Test System of control of running 12.1.0.2 and Orcle Linux 6.6 Clowd.

  If the judgment of the instance (which takes a lot of time) that I will meet him this message:

  Admin Server Port is occupied by anoter process. Please stop the process to free the port.

  However, I don't know what process could cause this. The Port of Eastern system complains about is 7111

  He also makes note that Oracle Management Server is not functional.

  I heard that nodemanager and manage servers could use the same Port

  However, how can I know if this is the case - and if yes: How do I solve this problem?

  Sorry, I really tried to get the manuals ;-)

  Concerning

  Christian

  Hi Christian,

  I think that you run the automatic start/stop of the SGD application using init.d run level in your environment.  To answer your question

  (1) officer doesn't shoot to the top of the starting agent WHO. And if SGD is down, agent will continue to operate, but there not all heart beat at Stargate Command and it will download all the data to WHO.

  (2) is not necessary, but it depends on up to customer's requirement on the way to the startup/Shutdown EM under the server restarts. Some customer wants to start service EM manually after the server restarts, and some would start automatically as part of the reboot of the server. We support both the path and there is no restriction in using both methods.

  Thank you

  Sumesh.

• How to get the server port in the operation of the component.

  Hi all

  How can get port information no server in what component work.

  You can get by using sharedObects

  see this

  http://www.techartifact.com/blogs/2013/10/get-intradoc-server-port-in-custom-component-in-WebCenter-content-UCM.html

• VRTX internal server ports

  I have the impression that I'm going to a painfully obvious answer here but how do I activate more ports for a server blade in a VRTX chassis?

  My two blades have 2 of the 4 active ports.  If I go into the port configuration in the/o GUI module, the other two ports show 'down', but there is no option to raise.

  This makes me think that each blade server would have a setting for how many NIC ports internally it uses, but I can't find such a setting anywhere in the graphical interface of chassis management.

  What Miss me?

  Hello

  wardog25

  I have the impression that I'm going to a painfully obvious answer here but how do I activate more ports for a server blade in a VRTX chassis?

  You can not activate more ports. You have only two available ports per node due to IOM/switch you use. The IO module will use only the first two ports on each node. You will need to move than the IOM to allow access to more ports. According to me, the IOM is the only available option that has this port restriction, but I haven't checked all the options available to make sure.

  Thank you

• Module Extension Dell EqualLogic Multipathing v1.4 missing setup.pl

  The new v1.4 Dell EqualLogic Multipathing Module of Extension is missing setup.pl script.

  Hello

  Thank you.  A new package is created.  In the meantime, you can try the setup.pl v1.3...   Or use alternative methods to install it.

  Feel free to open a support on this file as well.   They can add you the question open with genius.

  Kind regards

  Don

• R420 server port idrac

  Hi all, I do not see idrac port located at the rear of the server poweredge R420,. what it means. I see in the basic configuration, if I walked into ST, it is mentioned as idrac 7 express. where he is.

  To configure the iDrac that you would need to access the BIOS to iDrac through prompt CTRL-E to start.

  You will configure the ip address and everything from there. Then connect via a browser from another system through https://drac ip and then connect to the Web interface.

• problems with the IPCC monitoring server port

  I have 4.0 (4) IPCC Express Premium with Call Manager 4.1 (2). I have a server with two NIC a 'normal' IPCC and other oversight bodies. I have configured the port monitoring with a few other IP (172.16.255.10/24) and I set up RSPAN on switches. I see a call between officers and the appellants.

  But, after a reboot of the server, I get the error that my server will stop after a minute. I cann't see ane packages from monitor port. When I disable the port monitor and restart the server everything is OK and then I can activate the monitor port and everything is OK.

  I have nothing in the registry settings.

  What should do?

  Thank you

  I had the same problem as you and this has solved my problem.

• Enable the ports module network IPS without Defense Center

  Hello

  I am IPS8350/Defense Center solution deployment, for the moment as I donI am not able to reach the domain controller, so I can't control all IP addresses, but I come up with a question, y at - there a way to set up interfaces, via CLI IP addresses? I did some research but led to nothing... I have two modules of network but if I connect something that they do not come to the top, made of the connectivity tests and so far the traffic is going through the IPS.

  I'll make a few changes on the mode of failure of opening on the ports, which can be controlled via the CLI and run some tests.

  Thank you for reading!

  Hello

  Yes you are right, there is no way to set the configuration of the online of CLI interface. Lasted, too, if you set inline, we would need to push politics, etc., which is only possible in DC. We have to get the domain controller running and enter the sensor on the domain controller.

  Kind regards

  Aastha Bhardwaj

  Rate if this is useful!

• increase the UCS blade server port

  Hello world

  I have a client with the following UCS environment:

  2 FI 6120

  2 chassis 5108

  6 B200M2

  Each chassis 5108 have 2 Fex 2104 and each 2104 a 2 10 G (cable Twinaxial) a link to each fabric Inteconnect 6120.

  If we increase the number of Serverport for each chassis 5108 from 4 to 8 (each fex will be 4 uplink), could we destroy the traffic to the blade?

  Is there a better procedure for this activity?

  Concerning

  Dino

  Hi Dino,

  I'm not sure what you mean exactly by destory traffic towards the blades? Are you talking about any loss (eth and fc) connectivity for the blades for this upgrade activity? If so yes there will be. You can connect the cables between the FI and the IOM and the same brand, that ports are srever ports having no impact, but you can use the new links you will need to re - emphasize the chassis which is a disruptive process and trigger a restart of the blades.

  As for the procedure:

  (1) connect the ports between IOM and YEW,

  (2) mark ports on the FI as ports on the server,

  (3) re - ack frame that has these new ports configured (as mentioned, make sure that the blades on the frame are closed before you re - ack)

  I hope this helps!

  . / Afonso