With the help of v31.4.0, anyway I can designate the server ports as 110 and 25 instead of 110 and 587 for Bitdefender anti-spam?

Similar Questions

• Try to download on our FTP Muse site recognizes the following FTP screen then stands up and says... "Unable to validate the specified domain that is associated with the server FTP. Still? "FYI, until I update to the 2014 version it worked fine. Pl help

  Try to download on our FTP site

  Muse recognizes the FTP

  Then the next screen appears and says...

  "Unable to validate the specified domain that is associated with the server FTP. Still? »

  FYI, before I update to version 2014 there worked well.

  Help please. Thank you. Chuck

  OK, I spent about 2 hours on the phone with the support guys Muse and here's what finally worked...

  When the second screen, enter ftp, your domain.com NOT www.yourdomain.com

  then put the name of next folder as usual.

  Why it works that way...? who knows... but it works.

  I would like to know how you do them.

  Chuck

• Satellite M30: Cannot use COM with the Modem port

  Hello

  I have a satellite m30. I have problems with the com port to use with the modem. I get an error code saying 12 resources etc. There is no i/o or IRQ conflict IRQ 04 and e/s beach is 03F8 - 03FF. I tried to uninstall various things to free resources, but still the same error.

  Any help would be greatly appreciated.

  This problem when you use the Toshiba Recovery CD?
  Try to disconnect all the external devices and install Windows from the Toshiba restore CD.

  Additional please check several comments here in the forum area Modem. I found several threads with similar issues

• I can't send emails with the server that I use to receive. Can you tell me how to find my server from?

  Help send emails

  I can't send emails with the server that I use to receive. Can you tell me how to find my server going.

  Your provider of messaging service for this information.

• Is there a problem with the server of Combat Flight Simulator 3?

  Is there a problem with the server of Combat Flight Simulator 3? I can play online because I can connect to the internet.

  I have READ 651,2 Kbps. someone helpme?

  Hi Roy sanchez,

  Thank you for using Vista answers Forum.

  What happens when you try to play?

  Here is a link to a few known issues with Combat Flight Sim:

  http://support.Microsoft.com/kb/331570

  I'm not sure of CFS, but most of the game servers are hosted by the players.
  You can check with your preferred server host to see if they are experiencing problems.

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• I can't send or receive email from my email account. Not 0x85ad3202 error code "no connection with the server.

  original title: email problem

  It was something I did on 'email settings', I think, with the POP3...? Think I might have my gmail sent to my msn account... I can't understand.  I can open all the files, sent mail, etc... but cannot send or receive e-mail from this account.   It works on Hotmail on other computers and even this same computer.  get the error code: 0x85ad3202 "no connection with the server?   Thank you for any suggestions/help DJ

  If you need help with MSN, experts are loitering in the forums 'on-line'.

  Windows Live Solution Center
  http://windowslivehelp.com/

• Error - 'Auntentication with the server failed. Family Tree Maker software does not connect on the Web dashboard.

  Original title: Family Tree Maker does not connect on the Web dashboard.

  My Family Tree Maker 2009 does not connect to the Internet comes up with the message which is cannot authenticate the server, but it tells me that my version is up-to-date.  He has always worked so far? Comes with the following message if I try to do anything that involves the net.

  "Auntentication with the server failed.

  Hi HelenTL,

  You did changes to the computer before this problem?

  If you have any software security & firewall installed, disable them temporarily and check if the problem persists.

  
  Note: check to allow them back on the computer after you complete these steps.

  Hope the helps of information.
  Please post back and we do know.

• can not connect with the server.

  I can't connect to the internet. WI - FI connected and at full power. This just happened and it's never happened before.

  Hi, it seems that there is a problem with the connection between your router and the dsl modem. Make sure the pin of the Ethernet cable is plugged correctly in any LAN port available on DSL Modem and on the WLAN port in the Wifi router.

  Go to 192.168.0.1, run the installation/quick installation program from this interface and make sure that you preferred DNS address type 192.168.1.1 or default of the DSL Modem ip address if you know it's different.

  It is always a good thing to restart both the DSL/ADSL Modem wireless router periodically to refresh the system and you will face less problems like the one you face now. If both modems are enabled for quiet a long time, it can either be hanged or perhaps become hot to damaged. So reboot them once quiet often when not on duty.

  Mark as answer if it answers your Question. Mark as helpful if it helped you continuer.* *.

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• Can't send or receive messages on behalf of Verizon (tdwolfe2). A timeout occurred during communication with the server.

  This message box appears quite a bit. All I have to do to solve it? Thanks for any solid help. MW

  Hi Mary,

  Please contact the Microsoft Community forums.

  It seems that you are unable to send or receive messages on behalf of Verizon.

  He would be grateful if you could answer a few questions to refine the question.

  1. What mail client do you use? What is customer e-mail based on the web or Microsoft Outlook client?

  2. are you aware of changes to the computer before the show?

  3. do you use Internet Explorer to access e-mail? If so, what is the version installed on the computer?

  This question seems a temporary problem with the server and you can consult again later.

  If you use Internet Explorer, you can perform the steps described in the article.

  The problems of access to webmail using Internet Explorer

  http://support.Microsoft.com/kb/2483955

  Note: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  If you use the Microsoft Outlook client, you can post the question here.

  http://answers.Microsoft.com/en-us/Office

  If you use Windows Live, you can post the question here.
  http://answers.Microsoft.com/en-us/windowslive

  Hope this information helps. Get back to us if you have more queries about Windows.

• How to block a DOS attack while allowing clients to communicate with the server

  I need a temporary solution for a dos attack. I am running Windows 7 Professional and need to block a DOS attack while allowing customers to communicate with the server

  Hi Vinniethetouch,

  Thanks for posting in the Microsoft Community.

  The question you posted would be better suited to the

  TechNet forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Impossible to download avast antivirus get message... the connection with the server has been reset

  I have a laptop Samsung RV510 with windows 7, need a free antivirus software

  try to download avvas as wel as AVG

  Get message afte a vew of download twinks... Impossible to download avast antivirus get message... the connection with the server has been reset

  Help, please

  Other downloads, for example widows day running ok?

  You download from the site of decision makers or one of the other indirect sites?

  MSE of MS is free

  http://Windows.Microsoft.com/en-GB/Windows/Security-Essentials-download

• Windows 8 Pro with the media library is enabled, and the watermark is still visible

  Windows 8 Pro with the media library is enabled, and the watermark is still visible

  Hi all

  I have recently opted for the offer to upgrade to Windows Media Center from Microsoft and everything is is well spent, I had my product key, installed library and all was good with all countries, UNTIL I noticed that the watermark from Windows 8 is now visible saying '\n Mode Test Windows 8 Build 9200 of Pro with Media Center \n ".

  Once again that Windows is activated like her, and I quote "Windows is activated".

  Help please

  Aiden

  Open the command prompt (Admin) and then enter:

  bcdedit/set testsigning

  Now restart your computer and the watermark will disappear.

  The test mode is for test drivers. You have probably run Windows Experience Index.

• Windows store error "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  Original title: Windows 8 store does not.

  Whenever I try to open the windows store, I get the message: "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  This happens constantly, and because of that I have not been able to upgrade to Windows 8.1.

  Hello

  This behavior can occur if the antivirus application blocking the app Store or changes due to some recent on the computer.

  I would suggest trying the following steps and check if it helps.

  Method 1:

  Make sure that your PC is up to date

  Make sure that updates are installed on your PC and that your antivirus program does not prevent the application from running. For more information about installing updates for your PC, see Windows Update: frequently asked questions.

  Method 2:

  Run 'Windows Apps Store' convenience store

  You must be logged in as an administrator in order to run the "Windows Store Apps" troubleshooter. This tool can automatically find and fix some issues with applications. It is available in English only, but will work in all languages. You can let automatically try to fix any problems found, or select what you want made repairs.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 3:

  I suggest you delete the Windows Store cache and check how it works.

  1. Press Windows + R logo
  2. Type wsreset.exe in the run window, and then press ENTER.

  Method 4:

  Define the Apps approved in third program Antivirus- If you have a third party AV program installed, check its settings to make sure that the app Store works is not changed to be approved. If the AV program has the app as unreliable, it will block and prevent opening the app.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.