RAC: disable remastering dynamic
HelloWe have an application that runs on a significant events of remastering rac environment dynamics experiecing. We would like to run the load on the 1 cluster node, but not anywhere near the capacity to do so. Because we're stuck running the workload on both nodes of the cluster at the same time, we see a lot of waiting due to remastering. I would test the deactivation of this feature to see if that helps our performance until we can change the architecture, but I found little documentation on how to do it. Someone has it before tested and know how to disable the dynamic remastering?
To disable the DRM, you must set the following parameters:
_gc_affinity_time=0
_gc_undo_affinity=FALSE
However, I agree Aman who just turn it off is not recommended.
Tags: Database
Similar Questions
-
How do disable you dynamic horizontal scrolling "feature"?
How do disable you dynamic horizontal scrolling "feature"?
its totally _ me off. Im trying to use a new program of photo manipulation, but can't zoom in and because it scrolls the work area, I need trouble! Ugh! I swear to God _... it's just ridiculous!
Please someone tell me how to disable this "feature".musgoodw, the best advice I can do is just play with the settings of '' mouse. '' Just type mouse into the start menu.
By default, a Synaptics touchpad has a vertical scroll box to the right of the touchpad. Some versions of pilot also (default) enable the horizontal scroll down box.
Both can be changed to enabled, amount of space used, where they are, speed of scrolling and much more in the config of Synaptics. You would be pleasantly surprised how you can set one up. ;)HTH,
Chris [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Disable caching dynamic users of GBA
Hi all!
I have a b2 ACS 3.3 (2) what use AD as an external DB. I have experianced, dynamic users created after authentication successful advertising, and these users are serving since the ACS internal database. I did a test environment, and it's the same thing. I improved GBA at 4.0, and it's the same thing.
I find a mention in the ACS4.0 guide that says the following:
"Mapped users dynamically dynamically will keep mapped, even when their group."
mapping settings are changed in a group that is set to disable the cache users mapped dynamically. »
So my question is, where can disable caching of mapped users dynamically?
Thanks a lot for the answers!
By (e)
Miki
Miki,
This is a feature that is added on ACS 4.2 see notes below:
Ability to disable the caching of the dynamic administrator users can determine if they want to disable creating dynamic users while using an external database for authentication. Minimum performance disruption occurs to disable the caching of dynamic users.
-
Hello
Whenever I open any photo in camera raw in photoshop, it opens as a smart object in photoshop cc2015.
How can I disable that?
Already when I opened pictures in camera raw, it will open in the background instead of the dynamic object.
You check the settings for camera Raw workflow.
-
Adjustments are disabled for dynamic objects
I want to edit a photo of LR3 as dynamic objects. When I open it for LR3 in CS5 I can't use the adjustment tools because they are disabled (all instead of the shadows and HDR). Why?
Because only a few of the adjustments can work as smart filters. And because dynamic objects are not pixelated layers that can be adjusted in a destructive way.
You should use adjustment layers.
-
I guess that I'm confused here. So my workflow is not compatible with the objects dynamics and Im constantly wasting time pixelation for my workflow and would never take advantage of the benefits of dynamic objects. for some reason today when I "spent" linked photo in a new document, it became a dynamic object. Why and how can I turn off this feature. I've never done a dynamic object. On paper, smart objects is large. In reality, it is a characteristic of a lot of unnecessary time being pushed hard in Adobes training and marketing. I would like that he went for me please.
All linked files are dynamic objects. When you rasterize a smart object, it is no longer bound.
-
DB: 11 gR 2
Can anyone suggest me a doc on remastering dynamic oracle RAC database environment.Documents on the remastering are thin on the ground.
You can see Oracle Support id 390483.1 doc , but doc bouchelouche Ntangu [url http://orainternals.wordpress.com/2010/03/25/rac-object-remastering-dynamic-remastering/] is probably the best around.Published by: Dom Brooks on December 6, 2012 12:34
Link to the caly doc was gone... -
Oracle 11 g 2 RAC does support IP dynamic?
Oracle 11 GR 2 RAC does support dynamic IP, or does it only support static IP?
For IP addresses? 11 GR 2, you will have the following:
public host name
The private host IP
VIP listener
SCAN VIP
Your private host names should not be dynamic IPs because no one should ever use. Interconnecting them will use however. Keep these static to save you headaches.
Similarly, the public hostname should not be accessed by anyone other than information TECHNOLOGY personnel who need to do some work on the server.
Applications should use the VIP or SCAN VIP listener. I guess that these can be dynamic IP addresses. However, with today's networks, there is little need to do. We use DHCP to all of our IP addresses, but then bind us the registration of the contract so that DHCP will always return the same IP address. Forgive me, but I don't remember the network for this term.
See you soon,.
Brian -
Dynamic image resizing Firefox 12
Is there an option to disable the dynamic image resizing FF12?
You can set the Boolean browser.enable_automatic_image_resizing false pref on the topic: config page.
-
My laptop is a model y560; I got it a week ago. I know that the settings of the monitor and whatnot have this thing "dynamic contrast" pass, which apparently made the screen dim/brighten up whenever he felt the time to do it, DESPITE some power settings you can say to not darken the screen, never. I'm sure there are people who really love this parameter, but it is frankly one of the most annoying things that I have ever known.
I looked at the manual and looked more internet research and a little through the controls that I can find easily, and I am still unable to find a way to disable this "dynamic contrast", permanently. I don't want it to happen more. I am for setting the screen to cloud in some situations to be able TO, but only randomly have begins to decrease intensity while I'm in the middle of the reading/typing/watch that something is rather rather boring.
How do the parameters that will be turned off this feature? And once there, how can I turn it off?
Check this KB.
Maybe what you are looking for.
-
WRT160N: Getting dynamic IP address 169
Hello!
Linksys WRT160N, bought yesterday and I want it behaves same way did my Buffalo WHR-HP-G54. So I live in apartment building for students, and we don't have modems, just the RJ-45 ports in the wall. If I plug the cable directly from the wall of the network card in my computer, my computer receives the dynamic ip address from the ISP. With my Buffalo, I connected the ethernet to the WAN sa-port cable and changed the router in bridge mode. In this way, there was 4 other ports free for the other PC and of course wireless too much for the other PC. Each PC connected via the Buffalo had a dynamic ip address from ISP, up to five addresses, which is the limit of my ISP. I plugged the ethernet cable from the wall of WRT160N Internet port and disabled NAT, dynamic routing (RIP) and DHCP server on the router Linksys, so all my computers have addresses ip starting with 169. And when I plug the ethernet cable from the wall to a port other than Internet-port of Linksys, all computers get the correct IP addresses via a wireless cable. What is wrong, is at - it a setting I have not seen? Some setting that I can use Internet-port and have other 4 free ports for other devices and other devices can get dynamic IP from my ISP.
Ignore the Scrooge. What he wrote has nothing to do with your problem.
Unlike the Buffalo WHR the Linksys doesn't have a configuration option or switch to alternate between the 'bridge' and the router mode. The Linksys always uses the internet port on a different interface of the numbered ports. You can't fill.
For example, if you want to 'bridge' with the Linksys is the configuration you already have when wiring from the outlet ports numbered, i.e. do not use the internet port. You will have to "give up" the internet port then. If you need more wired ports, you must connect a switch to the router.
-
Situation/configuration is the following:
-2504 WLC (8.1.131) with a total of 22 AP is connected.
-Several WLAN active each with its own interface (dynamic)
-L' (static) management interface is the option "Activate the dynamic management of AP" enabled.
-The four physical interfaces of the WLC remain TROLLING configured.
What is the problem:
In the current configuration, the management interface is in the same vlan as the AP we now want to move the management interface to a different VLAN, but keep the AP in the vlan current. The idea is to move the management interface to its new vlan and disable "enable dynamic management of AP". Then, create a new interface (dynamic) in the same vlan as of AP and select 'turn on the dynamic management of AP' on this interface. Configure it as it is no problem but is does not work. The AP will record is no longer with the WLC.
Is there something I may be missing why this does not work?
Richard.
Yes, that's the gist of it.
I recommend always making a capture packets if only just for educational purposes and to see how this works in action. I found it interesting when I did in the lab here.
-
How can I disable comments pen in Windows 8?
I use a Wacom Intuos 4 Tablet and I need to disable the pen comments like I did in Windows 7. Help, please!
I got this on the forum of Wacom, I think that...
He still isn't a final solution, but it works! You will get rid of the ripple effect and offset drag / move!
I always have the CTRL, ALT and WIN tips that appear when I press the buttons during a mode "pen".
Use this trick until a more sophisticated solution comes from Microsoft and Wacom.
1. using the latest driver from Wacom
Note change your registry database at your own risk and backup before you continue!
2 difficulty of recording applied that worked for Windows 7.
[HKEY_CURRENT_USERSoftwarePoliciesMicrosoftT "TurnOffPenFeedback" = DWORD: 00000000][HKEY_LOCAL_MACHINESoftwarePoliciesMicroso "TurnOffPenFeedback" = DWORD: 00000000]
3. using GPEdit.msc Disable Pen dynamic Options
User ConfigurationsAdministrative TemplatesWindows ComponentsTabletPC
Sliders - disable the pen comments set to 'enable '.
Hardware buttons - prevent press and hold set to 'enable '.4. in the configuration, Pen and Touch Panel, press and hold the right click is checked and enabled.
5. in Wacom table properties, under options, set the switch side mode the value click hover.
6 opportunity hack current registration
[PanelCursors PanelDesktop] ContactVisualisation from 1 to 0 and the GestureVisualisation key
from 31 to 0 1FRestarted my PC and everything works as it should! I am able to select text, drag and click the drop-down list boxes on web pages without any problem of delay and even using Intuos5 wireless module. The only thing that is not a big problem for me at this point is when I press the switch on the side of the pen to right-click, a circle of feedback.You need to activate press on and hold a right in the control panel pen and touch click to prevent click and drag delays, such as selecting text and dragging boxes. If you clear this option, then you will get problems of scrolling, drag and drop boxes to drop-down list on the web pages do not work. In order to avoid the right click menu popping up set the duration to the possible commissioning Long and the speed too short. This will give you your pen about 2 seconds timeout before the click menu right will go up. We hope a fix to keep it right click will soon! -
dynamic action on the selected value shuttle
Hello
Can anyone help me in this.
I guess a requirement
There is a shuttle Apex and multiple selection is allowed
and there are values such as:-others, first, second
but when we choose other no other value should be able to select
in what other is selected in the shuttle a textbox is displayed by dynamic action
example on https://apex.oracle.com/pls/apex/f?p=76604:3:4326822625865:
workspace:-REEMATEST
username:-test
password:-test
76604 application
page 3
ReemaPuri wrote:
can you give me a link for the dynamic creation of checkbox
FOR EXAMPLE BASED ON CREATED LOV SHARE COMPONENT
Select the column name as the name of column d, r
the name of the table
Boxes are just another way to make a LOV. For a dynamic set of checkboxes, the standard pair of value/label LOV SQL projection is required in the definition:
select initcap(dname) l, to_char(deptno, 'tm9') v from dept order by v asc
If additional values are required, they can be included in the query using unions:
select initcap(dname) l, to_char(deptno, 'tm9') v from dept union all select 'Other', 'OTHER' from dual order by 2 asc
Checkbox events can be handled by dynamic actions as indicated on page 586 of your test App. Note that I prefer to enable and disable the controls on form rather than hiding and showing them that there is less confusion for the user. It is simple to change the disable/Enable dynamic actions to hide and show if necessary.
-
Hi all
Suppose I have table, whose structure changes frequently on a daily basis.
For example. / / desc my_table gives you after the name of the column the day 1
SQL > my_table DESC;
Output
Name
Age
Phone
Day 2, two other columns are added, viz, address and salary.
SQL > my_table DESC;
Output
Name
Age
Phone
Address
Salary
Now, I want to create a Dynnamic RTF report which made extracting data from all columns from my_table daily. For this, I have defined a simultaneous program with XML output type and include in annex a data/definition of data model that takes XML as input and gives the final result of the conc program in EXCEL layout. I am able to do that for a constant number of columns, but don't know how to do it when the number of columns to display dynamically changes.
For 1 day my XML file should be like this.
<?xml version="1.0" encoding="UTF-8"?> <dataTemplate name="XYZ" description="iExpenses Report" Version="1.0"> <dataQuery> <sqlStatement name="Q2"> <![CDATA[ SELECT Name ,Age ,Phone FROM my_table ]]> </sqlStatement> </dataQuery> <dataStructure> <group name="G_my_table" source="Q2"> <element name="Name" value="Name" /> <element name="Age" value="Age" /> <element name="Phone" value="Phone" /> </group> </dataStructure> </dataTemplate>
And my day 1, EXCEL output RTF model should be like this.
Name age phoneSwapnill 23 12345
For 2 days my XML file should be like this. With 2 new columns selected in the SELECT clause.
<?xml version="1.0" encoding="UTF-8"?> <dataTemplate name="XYZ" description="iExpenses Report" Version="1.0"> <dataQuery> <sqlStatement name="Q2"> <![CDATA[ SELECT Name ,Age ,Phone ,Address ,Salary FROM my_table ]]> </sqlStatement> </dataQuery> <dataStructure> <group name="G_my_table" source="Q2"> <element name="Name" value="Name" /> <element name="Age" value="Age" /> <element name="Phone" value="Phone" /> <element name="Address" value="Address" /> <element name="Salary" value="Salary" /> </group> </dataStructure> </dataTemplate>
And my day 2, exit EXCEL model RTF should be like this.
Name address telephone pay23 12345 Madrid 100000 Swapnill
Now, I don't know below things.
- Make the dynamic XML as we did in the day 1 there are 3 columns in the SELECT statement and the day 2, 5 columns. I want to create a dynamic XML which must not be changed if the new columns are added into my_table. I don't know how to create this query and also create their corresponding items below.
- Make the RTF model dyanamic as day 1 there are 3 exit EXCEL columns and the day 2, 5 columns. I want to create a dynamic RTF model that would display all the columns selected in XML dynamic. I don't know how the RTF will create new XML tags and how it will know where to place them in the report. Means, I can create model RTF day 1, by loading the XML data for 3 columns and place 3 tags XML in the model. But how he will create and place the tags for the new columns the day 2?
Hope so, you got my requirement, it's difficult. Please let me know how I can implement the necessary solution using the RTF dynamically without any manual intervention.
Kind regards
Patricia K.
Post edited by: SwapnilK
Hi guys,.
I was able to solve above the requirement.
I created a procedure that would create & update (attached to the data definition) XML file dynamically for each race. This dynamic XML contains the SQL statement for the data query that is built dynamically. I am updating this XML file using XDOLoader utility to the definition of data. Then run my program customized to generate the excel output.
Exit excel retrieves correct number of columns dynamically (3 on Day1 and Day2 5), with corresponding data records.
Kind regards
Patricia K.
Maybe you are looking for
-
Display the page to 120% or 125%?
Hello, I went recently blind in my left eye and I would like to know, is there a way to define the display of the page at 120% or 125%? And this all the time for each page. I know that I'm able to set this option it Google Chrome but what about FireF
-
USB drive not readable on the Satellite A665-13W
Hello I have the following problem. I have Kingston DataTraveler HyperX 64 GB (USB 3.0) by car and it is perfectly readable on other PCs without worrying if I connect it to the USB 3.0 or USB 2.0 ports. The device is detected in Windows 7 64-bit on T
-
My computor won't play DVD in windows media player
oneAfter removal of all views of the files that are missing required that I found that my computor will not play DVD on windows media but cds can be played This has happened Don't know how many times == I deleted the files in my downloads Control Pan
-
Want to 6 1010sv: Intel rapid storage 10 Windows software/driver
Hello everyone! I noticed that Intel Rapid Storage process (32 bit) crazy sometimes, consuming a lot of CPU and RAM. In addition the control application storage quick, accessible via the Control Panel does not start. I would like to reinstall the dri
-
Satellite P100-276 - 1 pixel vertical line
Help, please. My Satellite P100-276 always shows a white * vertical *, screen of approximately 1/3 from the right side.Changing the resolution of the screen does not change the width of the line.Even at startup before Windows is active.A screenshot d