RAC/standby enviornment configuration - wise database

Similar Questions

• The configuration registry database is damaged

  When I try and install .NET framework 3.5 it fails installation and said this

  the configuration registry database is damaged

  Hello

  Thank you for giving us the opportunity to help you.

  I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. The place where you want to download .NET Framework 3.5?
  2. You are able to install Windows updates?

  According to the description of the problem you are facing problem in installation of .NET Framework 3.5 on your computer. This error: "the Configuration registry database is corrupted" is caused by the operating system files are damaged or because of the structure of the broken system registry.

  I suggest you to check the system files are they work very well or not and to check who are trying to run the (SFC) System File Checker tool.

  Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows 8.

  1. Press Windows key and X at the same time.

  2. Choose line (Admin) command on the shortcut menu.

  3. At the command prompt, type sfc/scannow and press ENTER.

  4. Exit the command prompt.

  For more information, refer to this link:

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  I suggest you to try the suggestion provided in the article mentioned below and see if it helps you to solve the problem.

  Setup of .NET framework 3.5 error: 0x800F0906, 0x800F081F, 0x800F0907

  If the problem persists, try to install .NET Framework 3.5 on Windows 8, Windows 8.1 and Windows 10 from the link below.

  Installation of .NET Framework 3.5 on Windows 8, Windows 8.1 and Windows 10

  Hope it would help. If the problem persists post returns with the required information, the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Configuration of database event view 4.5

  I have some difficulties to the addition of the database of the event view 4.5. It's a SQL Express 2005 on the vCenter server. It is configured to listen on port 1433 static. I use SQL authentication and a SQL account. I've attached screenshots with the settings. I keep getting 'an error occurred' trying to configure the database that someone here knows what I'm doing wrong? I think maybe the name of the database must be in a different format, but I have tried different things without success.

  TIA,

  -Poort.

  The OP said he found mistakes in a newspaper on the login server who helped solve the problem. Can you watch on your login server in C:\programdata\VMware\VDM\logs and see if any of the newspaper and gives no indication of more on what he doesn't like on the configuration?

• Steps to upgrade spirit RAC Standby Database?

  Hi all

  I RAC environment with 8 knots (4 Linux) I have a knot like physical standby for this CAR.

  My oracle is 10.2.0.3, and I want to update 10.2.0.5

  Could you advice I do not like, when I googled I found that I must begin by Clusterware before then?

  Any recommendation?

  Thanks in advance.

  Hello

  If you follow the second link I posted, all necessary measures are there, even if you have some CARS, it is explained here. Take a look at chapter "B.2 upgrade Oracle database with a physical Standby Database in Place", and if you have any questions post here.

  ARM

• Mrp for RAC RAC Data guard configuration configuration

  Grid infrastructure: 11.2.0.4

  DB version: 11.2.0.4

  OS: RHEL 6.5

  Never configured dataguard to the prior CFR.

  We have a production of 3 CARS DB nodes and we plan to implement a physical standby 3-node DB with real-time applies for this prod DB.

  

  In a RAC database, we can only configure one mrp on the side waiting. Thus, apart from the day before, we decided to use Node3 to run MRP. We send redo all instances as stated above on the primary side

  Configuration side Step1.Primary

  Thus, in the all 3 instances of primary DB, we will configure LOG_ARCHIVE_DEST_2 as follows.

  Again all 3 instances should now point to Instance3 Node3 break-in:

  ALTER SYSTEM SET LOG_ARCHIVE_DEST_2 = 'service =acmsprd_dr0_tns delay LGWR SYNC AFFIRM = 0 DB_UNIQUE_NAME = acmsprd_dr0 VALID_FOR = (primary_role, online_logfile)' scope = both;

  Where acmsprd_dr0_tns is the following entry of TNS. As you can see, this name TNS tip to the side instance3 ensures

  acmsprd_dr0_tns =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = yrmst197 - vip3.apac.strcld)(PORT = 1521) .net)

  )

  (CONNECT_DATA =

  (SERVICE_NAME = acmsprd)

  (INSTANCE_NAME = acmsprd_dr03)

  )

  )

  Configuration of Step2.Standby side:

  Instance3 side Eve in Node3 in, start the MRP with real time apply

  sqlplus / as sysdba

  bootable media;

  change the database recovery managed standby database using the current log file disconnect;

  Nothing wrong with my steps above? Is there anything else I should do with respect to mrp?

  Thus, apart from the day before, the RFS process in each node will apply again he received primary for SRls independently to know if the mrp runs in this node. Right?

  Incorrect answer. RFS does not apply again as you said. RFS receives that again. However, RFS on all standby nodes can receive redo of any process of LNS on any node of the primary.

  It is the MRP which makes it apply, no RFS.

  Hi Brian,.

  You said

  "It is not necessary to attribute a SRL to a specific thread. This means that it is possible (and this is how I set up my backup RAC databases) for a SRL be used by any instance, no thread. »

  When you configure dataguard RAC DBs Eve (or primary DBs), add you the newspapers of recovery sleep without THREAD clause as below?

  alter database add standby logfile Group 1 ('+ ORL_DG1', '+ ORL_DG2') size 500M;

  alter database add standby logfile Group 2 ('+ ORL_DG1', '+ ORL_DG2') size 500M;

  alter database add standby logfile group 3 ('+ ORL_DG1', '+ ORL_DG2') size 500M;

  I dot does not specify a thread when creating my SRls. There is no reason to do so. Just that if you have X son of your primary and each thread has groups of newspapers make there, and then create of X * Y SRL in the day before.

  While you create the SRls, remember to create in primary school as well. You'll want them at the primary level to support the transition to the future operations.

  If this is the case, in any node Eve RFS can apply again to roll forward pending any newspaper in the standby database. Right?

  Often when people have discussions like this, it hurts ensure us that we are semantically correct otherwise, we can easily get confusing terms...

  In this case, RFS can write to any SRL, since they won't be assigned to a specific thread. And the SRL is not written in alternating as the ORLs. Then you can definitely see some of the SRL files never get used if you don't have enough flow to make to justify.

  I stay away from the term applies when the MRI because apply is that means MRP. Terms of mixing can sometimes lead to confusion on the road, that's why I would make sure to use the term appropriate to the discussion at hand. I started this answer indicating that RFS is not the 'applies' because of the way the term should be used. That I get to this part of your last post, I see that maybe we get mixed up words that's why I wanted to sort them.

  See you soon,.
  Brian

• Configuration of database running on the server with 256 cpu

  Hi all
  
  We have a rac 11.2.0.2 on Solaris 10 installation.
  The servers are 2 and a short configuration is:
  
  SQL > show parameter cpu_count
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  cpu_count integer 256
  
  psrinfo | WC-l
  * 256 *.
  prtconf | grep 'memory '.
  Memory size: * 130784 MB *.
  psrinfo - pv
  The physical processor has 64 virtual processors (0-63)
  UltraSPARC-T2 + (chipid 0, clock MHz 1414)
  The physical processor has 64 virtual processors (64-127)
  UltraSPARC-T2 + (chipid 1, clock MHz 1414)
  The physical processor has 64 virtual processors (128-191)
  UltraSPARC-T2 + (chipid 2, clock MHz 1414)
  The physical processor has 64 virtual processors (192-255)
  UltraSPARC-T2 + (chipid 3, clock MHz 1414)
  
  There are a lot of settings Oracle automatically design based on the number of CPUs.
  In my case, this number is too high.
  
  For example, normally db_cache_size = 4 MB * cpu, in this case the result is 1 G of db_cache_size.
  
  The plan is to create several databases on this car, so the question is:
  
  Is there a way to design or to tell oracle a different number of cpu?
  and in general...
  You have some tips on how it is possible to configure a machine so powerful that runs a large number of instances?
  
  
  Thanks in advance
  
  Published by: Spugna on May 7, 2012 03:01

  Hi Spugna,

  Of course, as long as you use Oracle 11 g you can use Instance Caging to limit each database, the CPU usage. Although it is no longer applicable to the single server database or a CCR node I see no reason why not to use with RAC. Look here for more information:
  http://docs.Oracle.com/CD/E14072_01/server.112/e10595/dbrm007.htm

  You could also consider the consolidation of these different in a large database of databases if it is possible and there is no dependence application?

  Kind regards
  EVS

• 11g RAC - RAW Devices Configuration

  Hello
  
  Please let me know if there is a difference in the configuration of RAW devices for 11g RAC compared to 10g.
  For example in 10g, we would separate RAW Devices for OCR, voting disk, ASM spfile, archives log files and database files.
  
  Please let me know if configuring RAW devices in 11g is different from that of 10g.
  
  Kind regards
  N V
  
  Published by: user7202581 on April 19, 2011 23:54

  Hello

  all first with 11.2. directly use the RAW devices is no longer supported. However, you can use RAW devices below ASM. So if you use ASM for data files, archivelogs etc, then the ASM disks can be RAW devices.
  Second: A general comment on Linux RAW devices. Have become obsolete from CRUDES Linux devices (I think with RHEL 5.3), so I recommend the direct use of block devices (which is possible since 10.2.0.2).

  No to your question:
  With 11 GR 1 material has not changed the configuration of the CRUDE devices.
  With 11 GR 2, the configuration has changed. See the Grid Infrastructure Installation Guide for additional and accurate information (on the installation, rights of user etc.).

  http://download.Oracle.com/docs/CD/E11882_01/install.112/e17212/storage.htm#CDECEBGH

  Concerning
  Sebastian

• RAC and standalone 10g EE databases on Solaris containers, ¿certified?

  Hello
  
  I said to check if it is possible on the same server running Solaris 10 coexists a RAC database and a stand-alone database, two g 10 EA.
  
  Containers would be used, therefore, with regard to the information to the I saw on Metalink, databases that are not CARS are certified to work on global and non-global containers and Oracle RAC is not certified nor supported in local containers.
  
  So, I think that the only option would be to install RAC on the global zone and the standalone database on a non-global zone.
  
  And my question is, if we should go for this configuration, it is certified and might have the support of Oracle?
  
  Thanks in advance.

  You're right, rac is not supported in solaris zones/containers. I think what you're suggesting (instance of rac and clusterware in global and sometimes unique area in containers) is supported, but please consider that your rac database could get expelled from the cluster for a reason or another which means a reboot of the server that would take also down all instances of monkey.

  If you are on SPARC CMT you can use LDOMs.

  Bjoern

• Configuration/ACS database consolidation

  Hello

  I have two ACS servers.

  One is the 2.4 version and the other is the 3.0.2 version.

  My wish is to install a third ACS 4.0 server which will replace the other two.

  I had planned the following steps:

  1 - upgrade versions 2.4 (srv1) and 3.0.2 (srv2) for 3.0.4.

  2 - export using tool CSUtil configuration of these two servers data;

  3. manually consolidate all data;

  4. install the new server with the version 3.0.4.

  5 - import using CSUtil data consolidated on the new server.

  6 - update the new server after version 4.0 recommended upgrade path.

  All comments on these steps?

  Y at - it no special mechanism/tool to consolidate the configuration from two separate servers for GBA?

  Thanks in advance.

  Kind regards

  Ricardo

  Ricardo,

  We cannot export devices with csutil. What we can do is to search for devices on GUI and download a CSV of the search result.

  DBSync does not database between ACS servers synchronize. DBSync uses a csv file to add devices/users in bulk. So if we create a CSV of users and devices we can import in ACS. More info about dbsync to: -.

  http://www.Cisco.com/univercd/CC/TD/doc/product/access/acs_soft/csacs4nt/acs33/user/sad.htm#wp756877

  Kind regards

  Vivek

• Turning to Oracle RAC to the only Oracle database

  Hi all

  We are responsible for "make a copy" of Oracle RAC database a customer and our plan is to finish with the FCAC and allows you to host a new unique Oracle database. Very few of us familiar with CARS and looking for suggestions on how to do it (without affecting the source JAR).

  Can take a full expdb of the source database and simply use impdp to import into the standalone database server?

  Comments/suggestions appreciated.

  Thanks in advance.

  Can take a full expdb of the source database and simply use impdp to import into the standalone database server?

  It is an option. Data pump does not care if the source and/or destination is CARS or a mix. If the database is too large, it can take a lot of time to complete.

  Another option is to use the DOUBLE of RMAN feature. And another option is to restore the database from a backup.

  See you soon,.
  Brian

• HPCM - configure the database failed

  Hello

  Recently, I installed HPCM 11.1.2.2 on top of my existing installation, setting up database Coordinator, I get error below.

  [EPMCFG] [ERROR] [EPMCFG-01020] [oracle. EPMCFG] [tid: 21] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] error: []

  com.hyperion.cis.config.ProcessingException

  at com.hyperion.oslo.OsloDBConfigurator.configure(OsloDBConfigurator.java:164)

  at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:929)

  at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:482)

  at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:91)

  at java.lang.Thread.run(Thread.java:662)

  Someone met the above error?

  Please suggest.

  Thank you

  CP

  Hello

  Check the privileges on your schema HPCM. (Grant connect, create, create view, resources at HPCM_SCHEMA). Make sure that you have granted all the roles according to Oracle pre - req.

  Not be able to achieve something else of this journal entry.

  In the case where it is a SQL Server, ensure that the snapshot

  

  Added PS to the details of creation of SQL Server database.

  Thank you

  Anjum

• configuration of database vault realm

  version: 11.2.0.2.0

  Operating system: Solaris

  Hello, can someone please tell me a good documentation that contains the configuration of the areas through command lines. The oracle documentation provides only the domain through Grid Control configuration. I want to create realms through the line of commnad or the use of pl/sql packages provided by the vault of the database.

  Thank you

  See also the help of the Package DBMS_MACADM

• Failed to retrieve the configuration of database file when installing EBS on 2 nodes

  I try to install EBS 12.1.1 on two different nodes on Redhat Linux 5. After properly installing the database on node1 (ebsdb), I started rapidwiz on node2 (ebsapps) to install the application technology. When I get to the screen where it asks "Do you want to create a new configuration or load a saved?", I chose to load a saved configuration, typied in the database connection information (ebsdb.sparkdb.com:PROD:1521) and get the following error. Anyone know what I am doing wrong? I am able to ssh to ebsdb to ebsapps and vice versa, and the database and listener is in place.
  
  Failed to retrieve the database configuration file.

  user564785 wrote:
  What file must be copied from DB node to the node of Apps and what place?

  conf_.txt - http://docs.oracle.com/cd/E18727_01/doc.121/e12842/T422699g54568.htm

  You can copy the file to any place on the application-level nodes.

  Thank you
  Hussein

• P6 Configuration of database API

  Hi all
  
  I try to install the Java API of P6 (local mode only), and I have problems with the database Configuration step. Anyone seen this before?
  
  The P6 database is on a Microsoft SQL Server 10.0.2573
  
  I get all the details ID password etc, and then when I hit the next button, it just hangs and the only way to shut down is to close the associated console window.
  I use pubuser but have also tried it with a server admin user.
  
  I ran a trace on the SQL Server and it seems to connect to SQL Server fine, but then does nothing else.
  It also shows the disconnection when close the console window.
  
  If it helps at all, when I run the 'general' demo, I get
  ERROR - Configuration was not found in the database
  ERROR - Configuration was not found in the database
  
  which I guess because the db configuration has not been yet defined upward.
  
  New development API P6 so I'd appreciate any help, even if it's just point me in another direction.
  
  Cameron

  I came across a metalink note that talks about compatibility issue with Oracle Sun JRE 6 Update 29. If you have this jre, you can try to uninstall and use the compatible version of the configuration tested to P6v7 document.

• connections user to the RAC/standby instances

  Before you configure client failover practices, I tested the user login to my RAC instances.
  
  1 I have a case of stop, of course all the connections go to body remaining.
  
  However, when both CARS are running, any new connection goes to instance 1.
  
  Is this normal? Is this the way supposed to be?

  I got a good MOS score for you... Useful power
  Check * how to set up a listener to SCAN and the customer for the TAF and Load Balancing [Video] [ID 1188736.1] *.