Radiation loss unexpected wi - fi

Similar Questions

• Retrieve all way down / permanent loss device cluster 5.0

  Hello

  I am facing in a loss unexpected permanent device in a cluster of ESXi 5.0.

  Accordingly to this failure, all ESXi servers in the cluster are now disconnected from their vCenter and so I can't manage them or make backups.

  In addition, I can not connect to the ESXi servers with vSphere client or HTTPS.

  Basically, a shared in iSCSI storage died suddenly. Fortunately, it was not used for virtual machines. Unfortunately, it was still mounted and used for the heartbeat of data store.

  Here is the esxcfg-mpath output - b, it shows that the only way is dead:

  EUI.68786f5457513978: SCST_BIO iSCSI disk (eui.68786f5457513978)
  vmhba39:C0:T1:l0 LUN:0 State: dead iscsi adapter: not available target: unavailable

  The virtual machines are always worked very well on another data store.

  There are 2 other stores of data used for the heartbeat.

  I am still able to connect with SSH on ESXi servers.

  I found this article to recover, but this requires access to vSphere client, which does not work.

  I also found a blog post saying a restart is required, which I am reluctant to do (it would affect virtual machines).

  Is there a way to recover without affecting virtual machines?

  Any help will be appreciated.

  On the storage system, unmask the LUNS died.  The CLI to follow the steps in this article to remove the paths of the dead.  From there on, restart your management services and try to access with the vSphere/Web Client.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1003988

• Retrieve an unexpected loss to develop LR4 adjustments?

  Hello. I was about to export some photos and realized that I lost all the adjustments to develop over a month, I did. If I go back to a catalog file of ealier at the beginning of October, I see all the settings, but it seems that the pictures have moved (I get an empty thumbnail with the question mark). Couple questions:

  1. Does anyone know why develop adjustments are absent on the photos of all my recent catalogs? I always move my photos in LR.
  2. Is there anyway to 'export' adjustments to develop older catalog and associate them with the correct photos in the new catalogue?

  Thank you!

  Jeremy

  Just a guess but it kinda looks like you opened a version of your catalog somewhere along the way backup and all the parameters of development finished it?

  In regard to number 2, here is a test, you can try: with only a SINGLE PHOTO selected in the catalog with the parameters develop intact, Hit CTRL (CMD) S to save the metadata to the file. Then in the catalog where lack development settings, select only the SAME PHOTO and read the metadata in the file metadata > read metadata from file. Development settings appear?

• All applications "quit unexpectedly" - recently upgraded to El Capitan.

  I'm at a complete loss for what to do about my Macbook. I can't identify when the problem started or what caused it, but my guess is it started after my upgrade to El Captian a good a few weeks ago.

  You see, I mainly use my iPad and iPhone on the day the day. My Macbook (mid 2010 model ' Macbook' white), just sitting in our living room and is only opened and connected to our TV to stream Netflix on Safari a few nights a week. For the whole of this year, which was its only use, so I can't comment on exactly when the apps doesn't work anymore, because I have not used in a very long while to.
  I got a notification of El Capitan upgrade a few months ago, so I did and my Macbook left overnight. It is only a day or two after that I went back to it to find the 'Welcome' screen and the new update in place. I completely forgot I have to perform an update. I then went on Safari as usual to stream a movie on Netflix and nothing could spread to alI. I gave up and closed my Macbook and watched on my iPad instead.

  It wasn't while a few days later I thought id try and solve the problem of streaming media. I tried Flash Player in the Finder to check updates, but after typing a single character, all the Finder window disappeared - it has not been seen all that. I tried to access their website but Safari was incredibly slow. I thought about my recent update of El Capitan has then tried to open the App Store for a possible new updated, but I was given message the completely unexpected "App Store." I tried from other applications to find many others gives me the same message, pictures won't work, Mail, Text Edit, and nor will the simple application 'Preview' among many others. However, iTunes opens, and Safari works very slowly. It is so selective with what will be or will not work.

  Most of the bugs I find necessarily need access to the App Store, but it won't work. I am looking for fixes for the App Store but I tried a lot of those, and they will not work either. This has been a problem for a good month or so now, but after trying and patches failed, eventually I give up and close my Macbook for a few more weeks before deciding to try again...

  What happens on earth I can do to try to solve this problem?

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Mail closes unexpectedly

  I received an email form Premier Inns - a hotel group of UK. When I try to delete my Inbox message form closes unexpectedly. This has happened several times and I am at a loss to know how to get rid of this particular piece of e-mail.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Satellite A215-7427 - BIOS update failed unexpectedly

  Hello

  Then I felt I had enough of this thing goes on the white screen of death on me and google for some solutions and it turns out there is some glitch a little known with these series which, for some reason, makes the laptop to freeze the screen screen off... it means the loss of any unsaved data with no possible way to avoid that it

  I was just an online questionnaire for my online college class and this thing just went to this white screen on me.

  Finally I find there must be a BIOS FLASH done. I get the latest related site Web from Toshiba s easy enough and run the option of windows.

  System works on Vista home.

  All goes well, until you get to the sector 7 I think 17 sectors that had to be erased and reprogrammed. I had closed all the programs that I could possibly close with many elements of the common tasks bar.

  My system has more load battery of 50% and indeed that he was connected to the electric network. There was no electric shocks or anything.

  All of a sudden I hear a noise and the system stops unexpectedly. System shuts down completely, not even the front led indicating power connection remains lit, but which and battery LED lights a few seconds later. The system turns itself, and when I turn it on it seems that it s just the power on led lights up without the screen same lighting to the top or make noises or the airflow from the CPU fan.

  Now half of my life was on this system and I'm absolutely overwhelmed with Toshiba for defective product that can't even be fixed with their very own fix solution.

  I did everything according to the instructions and it of still not. I just had a feeling it was going to happen.
  Now what? What is the solution if any other that it takes to a service center? This is my current BIOS a lost cause? Is the only way to replace or get a 2nd chance?

  pay attention: the system powers not even on more, nothing but power led changes when I try to turn it on.

  This system is less than one year from the date of purchase and I don t even know if my default basic warranty covers free or I have to pay something for it...

  Any ideas for guys?

  BTW, based user here.
  Really anything is appreciated.

  Are you using the original Toshiba AC adapter? It looks like the motherboard may encounter an error.

  There is not much you can do except send it to an ASP for repair. I hope that your unit is still under warranty.

• W500 power loss

  I had a W500 WIndows 7 that turns off, usually unexpectedly while you sleep, but sometimes too, so on. Disable it happens as if the power is lost (for example, the battery/cord are torn out). After a turn off like that, I sometimes need to reconnect the battery and the power cord. Doing some reading here and elsewhere on the web and came upon the electrostatic suggestion. Was able to go back at least a few times by touching the underside of the laptop, but it worked erratically.

  Since it occurs especially when the unit is in standby, I pretty much dismissed temperature and software problems.

  Decided to check the spindle of memory section bending solution. My laptop needs to have his palm rest took off to access the RAM modules. People kept on some pins door RAM, but since mine is not a special door of the RAM, I folded the pins at the bottom of the palm rest, and so far, no loss of power, but it is too early to tell.

  Laptop computer BTW is not guaranteed. Any suggestions? What I did is generally useful? Any other reason power loss sudden that I'm missing? (other than a software, heat and electrostatic)

  Thank you!!!

  Do you have a spare battery? I've seen these cause the problem you describe

• Total radiated power units (PowInfo)

  Hi, I'm a RESONATOR using AXIEM circuit design and I would estimate the radiative power loss. Specifically, I would like to know what fraction of power transmitted to port 1 of my design is lost in the form of radiation. Since it is a relative value, I expect a certain number of dB.

  I created a measure (electromagnetic > antenna > PowInfo > radiated power) and specified use FSAMP to the x axis, generating a curve on my chart as expected.

  How should I interpret the units of the graph resulting? Legend of the plot has the power radiated is given in dBm - then, units of power absolute. It seems that the absolute amount of radiated power would depend on the power used to drive the circuit. Such measures take a particular drive power and the port of entry, for example 0 dBm to port 1 of the circuit? I have not found such a specification in my search for the documentation.

  Thank you!

  Hello

  Big question.

  The piece you are missing according to me, is that in your configuration of structure EM, you configure the ports either be sources or endings for the analysis of the antenna.   Click on one of the ports and you will see the settings for these.   It becomes a little more complicated that any port can be a source.  By default, the first port is a source, and the rest are ports of endpoint that is probably what you want in your RESONATOR circuit.    The point being, it's that the radiated power must be a level of absolute power, as you drive your circuit with a level of absolute power.

  I hope that explains what is happening.

  Support of the AWR

• Return loss calibration

  Hello

  I track (Return Loss) + S11 of ASE and I S11 and S21 (loss of Trace) of just the track

  If I want to cal track of my Return Loss for DUT, how I would go to this topic? ABCD parameters are intrinsically designed for the 2-port networks.

  Wouldn't be all right if I take just size track loss and deduct them from the return loss "HAD + Trace?

  Thank you

  What you describe is a process called out incorporation. You have two networks in cascade and try to isolate the answer of a network of the data aggregate od network.

  Incorporation of radiation is quite simple, you simply convert the parameters S T settings, then multiply by the inverse of the network that you want to embeddeur.

  Here is a link to a tool on ni.com, which can be used for out-of-imbedding:

  https://decibel.NI.com/content/docs/doc-29840

  To answer your question directly, you can do simple subtraction in this case to isolate the estimated loss in question back. There are interactions with the input vector and the mismatch of impedance output where the phases dictate how to combine the waves and complex dipping is the process used to accomplish what you describe.

  Kind regards

  Andy Hinde

  Senior Systems Engineer

  RF and communications

  National Instruments

• HP 9000dn size unexpected tray for tray 4

  OK let it try again.  I have two HP printers 9000dn lets call the Imprimante1 and imprimante2 (both have a tray 4 attached).  I have an error on imprimante2 (unexpected size tray) 41.3 associated with tray 4 and tried the following resolutions to know available fixing.  I try so here whether anyone can explain or give me an idea of what is wrong with it.

  (1) swapped Imprimante1 with imprimante2 so that TRAY 4 is now used by Imprimante1 and error still appear after a print job.

  (2) traded on RG5-6235-000CN to Imprimante1, imprimante2 still shows up, but on Printer1 I placed it in her and it prints fine.

  (3) replaced all the rolls

  (4) replace all paper size detection (RG5-6207-R)

  (5) Ran the sensor, autonomous, engine tests and cleared very well.

  Checked 6) I don't know how many times the type size and tray tray and are properly set on letter and plain in both Control Panel and on tray 4 screen.

  (7) imprimante2 default factory reset and set all settings back to normal operation and error appears.

  (8) printed several odd jobs and the error did not show pages (100-200), but when I run a print job 400 + the error will appear in the 100 pages or later version, which seems that the error appears randomly.

  (9) when I cancel the current print job when the error pops up and the second job starts, it prints fine, but because print jobs must be in order I didn't wait for the error appears again before canceling it.

  I am at a loss, and I think I might start just to Exchange parts of the tray tray 4 imprimante2 Imprimante1 4, but I'd rather not if I can help it.  Also think it may be a cable or something.

  obyIT, what do you mean by "we're going to try again? I discovered some information for you, this link (http://goo.gl/Km5yB) describes a method to resolve this error message.

  Alternatively, there is little more information available on this page too (http://goo.gl/EtCWR).

  Regarding connections, what type of cable you are using? What is a USB or Ethernet connection?

  I hope this helps, but I would like to know if not!

• Repair Microsoft error message unexpected error cannot run

  I downloaded MS fix and tried to run, but get the error message that says: "an unexpected error has occurred, Wizard cannot continue.

  I am running windows xp.

  Any help here?

  Thank you

  You can post in the fix it Center forum here:

  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

  You must have at least Service Pack 3, use of the center of Fix-it.

  I think that you also more have installed on your system at the MSXML 6.0 parser (check in Add/Remove Programs).

  You can tell them that in the new thread you create there what the problem is that you try to fix and the Fixit you try to get to work.

  Small details like this are useful.

  I have never personally seen a fix it solve anything but maybe they work sometimes.  What would we do if there is no solution its?  Fix it yourself

  If you want to continue your question on here without using the not specified fix it, do this:

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

• Loss of power during the Installation of Windows Vista, need help

  Recently reformatted my laptop, a loss of power during installation and now when I turn it on I get the same message telling me that the computer stopped unexpectedly during the Windows Installation, press OK to restart your system. (Not a quote).  When it restarts, it continues at the same point and I get the same error message.  No disk Windows Vista, it's a computer laptop gateway and I have been using the Recovery Manager operating system is stored on the laptop.  Help, please.

  http://support.gateway.com/support/default.aspx

  Contact Gateway and ask them to send you a set of recovery Vista disc/s.

  Normally, they do this for a cost of $ small.

  If you can not now use the recovery partition to reinstall Vista, contact Gateway on the Support.

  It's their recovery partition, not Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• Windows 7 closed in an unexpected way, core Microsoft windows, event ID 41 power, task 63

  I just bought a new Fujitsu Lifebook T4410 and recently started to encounter a problem with it stop unexpectedly.  Here is the information of the event.

  Log name: System
  Source: Microsoft-Windows-Kernel-Power
  Date: 2010-04-04 10:41:51
  Event ID: 41
  Task category: (63)
  Level: critical
  Key words: (2).
  User: SYSTEM
  Computer: allen-PC
  Description:
  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      41
      2
      1
      63
      0
      0 x 8000000000000002
     
      4184
     
     
      System
      Allen-PC
     
   
   
      159
      0 x 3
      0x893efc68
      0x82d3bae0
      0x89bd61c0
      true
      0
   
  

  The driver that seems to be the origin of the problem is the HP1319FAX.sys.

  The HP1319FAX.sys seems to be a driver for printer HP 1319.

  If so, you can try the Windows 7 32-bit drivers from following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3547188&LC=en&cc=us&DLC=en&lang=en&cc=us

  The file "drivers only" hopefully will update the HP1319FAX.sys to a version compatible with Windows 7.

• Windows 7 - unexpected stops

  Hello

  We have a desktop PC running Windows 7 Home Premium, 32-bit computer.  Recently, at the initial start-up or wake up from hibernation, we get the error "Windows has recovered from an unexpected shutdown.  The file system and Windows Memory Diagnostic tool check both check out OK.  I understand that this is probably a driver issue, but have not been able to isolate.  Maintenance of the Action Center indicates the graphic driver NVIDIA stopped working 6 times, the last time which take place on 17/09/2014 at 16:53. Windows Update indicates that the driver NVIDIA GE Force 8500 GT is up-to-date.

  It is an example of info of the observer of recent events below. Minidump files can be found at:

  https://www.dropbox.com/sh/5qmkrai0gjxg1kp/AAD24AhGCOhEYFcZZA23zQgFa?DL=0

  Any help to isolate the source of the problem is appreciated.  If any additional info is needed, please advise.  Thank you in advance.
   
  Details of the Event Viewer:

  Log name: System
  Source: Microsoft-Windows-Kernel-Power
  Date: 17/09/2014 12:22:31
  Event ID: 41
  Task category: (63)
  Level: critical
  Key words: (2).
  User: SYSTEM
  Computer: Seagate
  Description: The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

  Some recent events produced the following troubleshooting error details:

  5 September 2014:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: 87E56008
  BCP2: 9433CABC
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\090514-24850-01.dmp
  C:\Users\Alan\AppData\Local\Temp\WER-50637-0.SysData.XML

  September 9, 2014:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: 87EB9308
  BCP2: 93717ABC
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\090914-21403-01.dmp
  C:\Users\Alan\AppData\Local\Temp\WER-38173-0.SysData.XML

  September 12, 2014:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: 87EAD008
  BCP2: 9353DABC
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  September 13, 2014:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: 87E8A008
  BCP2: 9272BABC
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\091314-22495-01.dmp
  C:\Users\Alan\AppData\Local\Temp\WER-50544-0.SysData.XML

  September 15, 2014:

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  Additional information about the problem
  BCCode: 116
  BCP1: 87EBD008
  BCP2: 9354AABC
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  September 17, 2014; morning:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: 87EB3008
  BCP2: 93517ABC
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\091714-25521-01.dmp
  C:\Users\Alan\AppData\Local\Temp\WER-71323-0.SysData.XML

  September 17, 2014; afternoon:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: 856E9228
  BCP2: 9511238E
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\091714-20779-01.dmp
  C:\Users\Alan\AppData\Local\Temp\WER-43898-0.SysData.XML

  Hello Alan,.

  We were finally able to access the files that you have shared the link, I analyzed the dumps using WinDBG and this is the output:

  Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 processors) free x 86 compatible

  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7601.18409.x86fre.win7sp1_gdr.140303 - 2144
  Computer name:
  Kernel base = 0x82a1c000 PsLoadedModuleList = 0x82b655b0
  The debugging session: Mon 1 Sep 14:44:28.991 2014 (UTC - 04:00)
  System Uptime: 0 days 0:00:35.880

  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  VIDEO_TDR_FAILURE (116)

  Try to reset the display driver and recover from timeout failed.

  Arguments:
  Arg1: 87eaf510, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).
  Arg2: 93538abc, the pointer in the responsible device driver module (owner tag).
  Arg3: 00000000, error code optional (NTSTATUS) for the last operation has failed.
  Arg4: 00000002, optional internal context dependent data.

  Debugging information:
  ------------------

  TRIAGER: Could not open the file of triage: e:\dump_analysis\program\triage\modclass.ini, error 2

  FAULTING_IP: nvlddmkm + 112abc
  93538abc push ebp 55

  DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT

  BUGCHECK_STR: 0 X 116

  Nom_processus: System

  CURRENT_IRQL: 0

  STACK_TEXT:
  8e253b74 93ef1fb3 87eaf510 00000116 93538abc nt! KeBugCheckEx + 0x1e
  8e253b98 93ee699c 00000000 00000002 dxgkrnl 93538abc! TdrBugcheckOnTimeout + 0x8d
  8e253bbc 93f2392c 00000000 00000102 87bd6788 dxgkrnl! TdrIsRecoveryRequired + 0xb8
  8e253c34 93f4da7c fffffcfb 000007e3 dxgmms1 00000000! VidSchiReportHwHang + 0x3c0
  8e253c5c 00000000 00000000 00000000 dxgmms1 93f4e19d! VidSchiCheckHwProgress + 0 x 68
  8e253c98 93f2a8f0 8e253c90 82a52b99 87bd6788 dxgmms1! VidSchiWaitForSchedulerEvents + 0x1b1
  8e253d28 93f4f501 87bd6788 82a52b99 87bd6788 dxgmms1! VidSchiScheduleCommandToRun + 0xaa
  8e253d3c 93f4f5bd 00000000 87099030 dxgmms1 87bd6788! VidSchiRun_PriorityTable + 0xf
  82 c 25141 a29d5b3b 00000000 dxgmms1 87bd6788 8e253d50! VidSchiWorkerThread + 0x7f
  8e253d90 82acc559 93f4f53e 87bd6788 00000000 nt! PspSystemThreadStartup + 0x9e
  00000000 00000000 00000000 00000000 00000000 nt! KiThreadStartup + 0x19

  STACK_COMMAND: .bugcheck; Ko

  FOLLOWUP_IP:
  nvlddmkm + 112abc
  93538abc push ebp 55

  SYMBOL_NAME: nvlddmkm + 112abc

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nvlddmkm

  Nom_image: nvlddmkm.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 5315b 301

  FAILURE_BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys

  BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys

  Follow-up: MachineOwner
  ---------

  **************************************************************************************************************************************

  Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 processors) free x 86 compatible

  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7601.18409.x86fre.win7sp1_gdr.140303 - 2144
  Computer name:
  Kernel base = 0x82a04000 PsLoadedModuleList = 0x82b4d5b0
  The debugging session: Wed Sep 17 19:50:38.453 2014 (UTC - 04:00)
  System Uptime: 0 days 2:51:49.341

  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  VIDEO_TDR_FAILURE (116)

  Try to reset the display driver and recover from timeout failed.

  Arguments:
  Arg1: 856e9228, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).
  Arg2: 9511238e, the pointer in the responsible device driver module (owner tag).
  Arg3: 00000000, error code optional (NTSTATUS) for the last operation has failed.
  Arg4: 00000002, optional internal context dependent data.

  Debugging information:
  ------------------

  TRIAGER: Could not open the file of triage: e:\dump_analysis\program\triage\modclass.ini, error 2

  FAULTING_IP:
  nvlddmkm + 11238e
  9511238e push ebp 55

  DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT

  CUSTOMER_CRASH_COUNT: 1

  BUGCHECK_STR: 0 X 116

  Nom_processus: System

  CURRENT_IRQL: 0

  STACK_TEXT:
  8e2aeb74 95b01fb3 856e9228 00000116 9511238e nt! KeBugCheckEx + 0x1e
  8e2aeb98 9511238e 95af699c 00000000 00000002 dxgkrnl! TdrBugcheckOnTimeout + 0x8d
  8e2aebbc 95b3392c 00000000 00000102 87664788 dxgkrnl! TdrIsRecoveryRequired + 0xb8
  8e2aec34 95b5da7c fffffcfb 000a146c dxgmms1 00000000! VidSchiReportHwHang + 0x3c0
  8e2aec5c 00000000 00000000 00000000 dxgmms1 95b5e19d! VidSchiCheckHwProgress + 0 x 68
  8e2aec98 95b3a8f0 8e2aec90 876a34a8 87692868 dxgmms1! VidSchiWaitForSchedulerEvents + 0x1b1
  8e2aed28 95b5f501 87664788 82a3ab99 87664788 dxgmms1! VidSchiScheduleCommandToRun + 0xaa
  8e2aed3c 87664788 00000000 8769ea48 dxgmms1 95b5f5bd! VidSchiRun_PriorityTable + 0xf
  8e2aed50 82c0d141 87664788 a29b8c61 dxgmms1 00000000! VidSchiWorkerThread + 0x7f
  8e2aed90 82ab4559 95b5f53e 87664788 00000000 nt! PspSystemThreadStartup + 0x9e
  00000000 00000000 00000000 00000000 00000000 nt! KiThreadStartup + 0x19

  STACK_COMMAND: .bugcheck; Ko

  FOLLOWUP_IP:
  nvlddmkm + 11238e
  9511238e push ebp 55

  SYMBOL_NAME: nvlddmkm + 11238e

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nvlddmkm

  Nom_image: nvlddmkm.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 53b 44481

  FAILURE_BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys

  BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys

  Follow-up: MachineOwner
  ---------

  **************************************************************************************************************************

  Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 processors) free x 86 compatible

  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7601.18409.x86fre.win7sp1_gdr.140303 - 2144
  Computer name:
  Kernel base = 0x82a43000 PsLoadedModuleList = 0x82b8c5b0
  The debugging session: Wed Sep 17 16:58:08.943 2014 (UTC - 04:00)
  System Uptime: 0 days 0:00:36.831

  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  VIDEO_TDR_FAILURE (116)

  Try to reset the display driver and recover from timeout failed.

  Arguments:
  Arg1: 873d 6008, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).
  Arg2: 9354e38e, the pointer in the responsible device driver module (owner tag).
  Arg3: 00000000, error code optional (NTSTATUS) for the last operation has failed.
  Arg4: 00000002, optional internal context dependent data.

  Debugging information:
  ------------------

  TRIAGER: Could not open the file of triage: e:\dump_analysis\program\triage\modclass.ini, error 2

  FAULTING_IP:
  nvlddmkm + 11238e
  9354e38e push ebp 55

  DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT

  CUSTOMER_CRASH_COUNT: 1

  BUGCHECK_STR: 0 X 116

  Nom_processus: System

  CURRENT_IRQL: 0

  STACK_TEXT:
  8e237b74 93f3dfb3 00000116 d 873-6008 9354e38e nt! KeBugCheckEx + 0x1e
  8e237b98 93f3299c 00000000 00000002 dxgkrnl 9354e38e! TdrBugcheckOnTimeout + 0x8d
  8e237bbc 93f6f92c 00000000 00000102 8747 has 538 dxgkrnl! TdrIsRecoveryRequired + 0xb8
  8e237c34 00000819 00000000 dxgmms1 fffffcfb 93f99a7c! VidSchiReportHwHang + 0x3c0
  8e237c5c 00000000 00000000 00000000 dxgmms1 93f9a19d! VidSchiCheckHwProgress + 0 x 68
  8e237c98 93f768f0 8e237c90 82a79b99 8747 has 538 dxgmms1! VidSchiWaitForSchedulerEvents + 0x1b1
  8e237d28 93f9b501 8747 has 538 8747 has 538 dxgmms1 82a79b99! VidSchiScheduleCommandToRun + 0xaa
  8e237d3c 93f9b5bd 8747 has 538 00000000 and 87549030 dxgmms1! VidSchiRun_PriorityTable + 0xf
  8e237d50 82c4c141 8747 has 538 a2896b6a dxgmms1 00000000! VidSchiWorkerThread + 0x7f
  8e237d90 82af3559 93f9b53e 8747 has 538 00000000 nt! PspSystemThreadStartup + 0x9e
  00000000 00000000 00000000 00000000 00000000 nt! KiThreadStartup + 0x19

  STACK_COMMAND: .bugcheck; Ko

  FOLLOWUP_IP:
  nvlddmkm + 11238e
  9354e38e push ebp 55

  SYMBOL_NAME: nvlddmkm + 11238e

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nvlddmkm

  Nom_image: nvlddmkm.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 53b 44481

  FAILURE_BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys

  BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys

  Follow-up: MachineOwner
  ---------

  **********************************************************************************************************************

  Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 processors) free x 86 compatible

  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7601.18409.x86fre.win7sp1_gdr.140303 - 2144
  Computer name:
  Kernel base = 0x82a4a000 PsLoadedModuleList = 0x82b935b0
  The debugging session: Wed Sep 17 15:21:29.130 2014 (UTC - 04:00)
  System Uptime: 0 days 0:00:37.018

  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  VIDEO_TDR_FAILURE (116)

  Try to reset the display driver and recover from timeout failed.

  Arguments:
  Arg1: 87eb3008, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).
  Arg2: 93517abc, the pointer in the responsible device driver module (owner tag).
  Arg3: 00000000, error code optional (NTSTATUS) for the last operation has failed.
  Arg4: 00000002, optional internal context dependent data.

  Debugging information:
  ------------------

  TRIAGER: Could not open the file of triage: e:\dump_analysis\program\triage\modclass.ini, error 2

  FAULTING_IP:
  nvlddmkm + 112abc
  93517abc push ebp 55

  DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT

  CUSTOMER_CRASH_COUNT: 1

  BUGCHECK_STR: 0 X 116

  Nom_processus: System

  CURRENT_IRQL: 0

  STACK_TEXT:
  8e243b74 93ed0fb3 87eb3008 00000116 93517abc nt! KeBugCheckEx + 0x1e
  8e243b98 93ec599c 00000000 00000002 dxgkrnl 93517abc! TdrBugcheckOnTimeout + 0x8d
  8e243bbc 93f0292c 00000000 00000102 87be3788 dxgkrnl! TdrIsRecoveryRequired + 0xb8
  8e243c34 93f2ca7c fffffcfb 6 00000000 dxgmms1 000007d! VidSchiReportHwHang + 0x3c0
  8e243c5c 00000000 00000000 00000000 dxgmms1 93f2d19d! VidSchiCheckHwProgress + 0 x 68
  8e243c98 93f098f0 8e243c90 82a80b99 87be3788 dxgmms1! VidSchiWaitForSchedulerEvents + 0x1b1
  8e243d28 93f2e501 87be3788 82a80b99 87be3788 dxgmms1! VidSchiScheduleCommandToRun + 0xaa
  8e243d3c 93f2e5bd 87be3788 876c9d48 00000000 dxgmms1! VidSchiRun_PriorityTable + 0xf
  82 c 53141 87be3788 a2bdef1d 00000000 dxgmms1 8e243d50! VidSchiWorkerThread + 0x7f
  8e243d90 82afa559 93f2e53e 87be3788 00000000 nt! PspSystemThreadStartup + 0x9e
  00000000 00000000 00000000 00000000 00000000 nt! KiThreadStartup + 0x19

  STACK_COMMAND: .bugcheck; Ko

  FOLLOWUP_IP:
  nvlddmkm + 112abc
  93517abc push ebp 55

  SYMBOL_NAME: nvlddmkm + 112abc

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nvlddmkm

  Nom_image: nvlddmkm.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 5315b 301

  FAILURE_BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys

  BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys

  Follow-up: MachineOwner
  ---------

  ******************************************************************************************************************

  The dump file downloaded leading to the same results, such as mentioned in the previous post. The defective module here is the nvlddmkm.sys, which is a NVIDIA driver. However, try to update the drivers for this video card.

  Reference: Update a hardware driver that is not working properly

  Hope this information is useful. Please get back to us, if still face issues with Windows in the future.

• unexpected error of game: Fable: The Lost Chapters

  Original title: My Game - Fable: The Lost Chapters crashes just after the battle of the final set of blades is beat.

  I hit the last time, then its glitches head to watch my character, then I get an unexpected error in game. Ive tried just restart my computer and go to safe mode but none of it works. WTF, it's * me Windows

  Hey Kane,.

  -What version of Windows is installed on the computer?

  -What is the exact error message that you receive?

  This could happen if there are installed video driver obsolete software of third parties in conflict or a virus problem.

  Here is a link for the common game problems occur with Microsoft games.

  http://support.Microsoft.com/kb/303032

  WARNING virus scan: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Let us know if the measures referred to by using the link or if you have any questions.