RAM frequency/speed to 3000 Y410?

Anyone know what is the maximum speed of RAM for Y410 7757?

I am currently using a 2 GB DDR2 800 MHz with Win XP, but I don't see the speed of the RAM since my BIOS cannot be displayed.

There a speed limit and it can support up to 1066 Mhz RAM?

I looked for the document on the web, but it is currently not available.

Someone please guide me.

The Y410 uses the GM965 chipset. This chipset supports a maximum memory 667 MHz. You say that it has installed its 800 MHz memory. However, a check by PC Wizard will show you that it is clocked at 667 MHz and not 800 MHz. memory 1066 MHz is out of the question. Only the DDR3 memory runs at 1066 MHz and DDR3 memory is not compatible with DDR2 memory.

Tags: Lenovo Notebooks

Similar Questions

  • Lenovo 3000 Y410 - How portable bluetooth enabled.

    Hello

    I have lenovo 3000 Y410 laptop. I looked in the forums, some of the forums mentioned that some models of Y410 laptop does not have bluetooth.

    Can you if it all please let me know how to find my mobile phone supports bluetooth?

    Thanks in advance

    Navas

    Thanks for the information.

  • How can I determine the RAM bus speed?

    Hello

    I installed the new 4 GB RAM replacing the previously installed 3 GB of RAM. The previous 3 GB of RAM has the 667 MHz bus speed (I found it in the user manual). The new 4 GB of RAM, the seller told me that has the 800 MHz bus speed. Now, I want to be sure that the seller does not deceive me, and he gave me the speed of 800 MHz RAM bus. How can I determine my installed RAM bus speed? My system configuration is the following:

    Windows 7 Ultimate 64 bit

    2.1 GHz Core2Duo

    4 GB OF DDR2 RAM

    Intel GMA 4500MHD

    Model: Acer Aspire 5738

    I have two modules of DDR2 soDIMM, previously, I had a 1 GB DDR2 667 MHz + a 2 GB DDR2 667 MHz RAM = 3 GB DDR2 667 MHz RAM (in my manual of the system provided by Acer)

    Now, after replacing, I have two 2 GB DDR2 800 MHz RAM = 4GBD DDR2 800 MHz RAM (as the salesman told me and I saw written in the package when he was unpacking and installation)

    How can I determine my RAM bus speed and be confirm that I really learned the 800 MHz? Please someone help me with this. Thank you.

    Four ways I see real quick:
    1 - the label on the RAM (assuming that it is there, and this truct you he has not changed it).
    2 - install the CPU-Z.  It will be listed in the memory tab.
    3 - install Belarc Advisor.  It also lists only (as well as much more information on the system.)
    4 take a look at the POSITION of the screen when the system boots - he must view RAM info.

    All the foregoing, guess however that isn't only MHz 800 RAM installed, but that the system is actuallyrunning at 800 MHz.
    Here, CPU - Z is the best choice, because it will give you the actual manufacturer for RAM; You can use it to find the specifications of the manufacturer.

    HTH,
    Chris

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Satellite A100-847: is artificially capped in BIOS RAM frequency?

    Well, this question has been asked before, but in a somewhat different way. The thing is that the CPU runs at 667 MHz and Intel 945 PM Express supports aliases PC5300 memory at 667 MHz. notebook was shipped with 512 MB of memory 533 MHz, so now I have two options:

    1. buy an another 512 MB of PC4200 RAM
    2. do not use it and buy two sticks PC5300

    I think there should be some benefits of running of the synchronous RAM with CPU, all the new RAM does not work at a slower frequency (or even does not work).

    See you soon.

    Hello

    667 MHz memory modules are a little faster than the 533 MHz modules, but the difference is small, and you will not see the benefits of great performances.

    If you want to use the 667 MHz speed, you need to use both modules with 667 MHz because
    If one of the modules will support 533 Mhz the other module (667 mhz) will also work with 533 Mhz max

  • Satellite L300 PSLB8E - how to increase the ram clock speed

    I have a laptop which is equipped with 2 slots for ram PC2-6400
    1 - Samsung module M4 70T5663QZ3-CF7 [800 MHz] 2GB
    2 - Samsung module M4 70T2864QZ3-CF7 [800 MHz] 1 GB
    GPU: Intel GM45
    Processor: Intel Core 2 Duo T5870 Mobile @ 2000 MHz
    According to the manufacturer, this kit allows you to work with the 667/800 MHz memory speed, but the problem is that reference programs show the actual frequency of the ram at 399 MHz.

    Question No. 1:
    (a) why not clock the memory works in 800 MHz but only 399 MHz,
    (b) how to change to a 800 MHz

    Question No. 2:
    I'm going to buy a processor
    Penryn Core 2 Duo T9600 processor (1066 MHz FSB) (2.80 G) Hz or T9400 (2.53 G)
    and install it in the computer
    and increase the memory of 2 x 4 GB 800 MHz (8 GB)

    I explained that this possibility is provided for by the manufacturer according to the Maintenance Manual for:
    Toshiba computer
    Satellite L300/L305
    Satellite Pro L300
    EQUIUM L300
    SATEGO L300
    (PSLB8x/PSLB9x)
    (PSLBAx / PSLBBx)

    If this operation will help to improve system performance

    I put t know what programs you use and if it is good or not if this info can be good and perhaps not. I put t know. The fact is that you n t have one any influence on the functionality of memory and I doubt that you can do something and change some values.

    Exact specification for laptop laptop does not for me but I think that Satellite L300 must have Intel GM45 chipset and I presume that for your motherboard FSB is 667 MHz. You can improve up to 8 GB and compatible 4 GB RAM module has PA3670U-1M4G part number.

    Upgrade CPU on Satellite L300? I put t know man. A friend of mine has this model of laptop and I don t know if it's the right decision to spend money to upgrade this old model of laptop budget.
    http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  • Upgrading RAM for Pavilion dv6t - 3000 CTO Select Edition Entertainment Notebook

    Model Pavilion dv6t - 3000 CTO Select Edition, Prod #VXO69AV, Intel Core i5 - 450 M (2.4 GHz with 3 MB L3 Cache) with Turbo Boost up to 2.66 GHz, 160 GB Solid State Drive Flash Module, 1 GB ATI Mobility Radeon HD 5650 switchable graphics, Windows 7 Ultimate. I currently have the original 6 GB of ram that came on the HP laptop, which includes a stick of 4 GB and 2 GB key.

    I want to spend the maximum amount of ram and the ram for maximum performance (speed). Analysis of Crucial.com says I have 6 GB of ram and the maximum ram is 8 GB. He also says that I can buy one (or two) 4 GB DDR3 PC3-12800. CL = 11.    NON ECC unbuffered.     DDR3-1600.   1.35v. here is the link for the crucial scan and recommendations:

    http://www.crucial.com/ProductDisplay?displayCompatibleLogo=1&urlRequestType=base&catalogId=10151&PR...

    Here is a link below for my maintenance SE dv6t and Service Guide, with memory on page 70. The service guide references DDR3 PC3-10600 clocked at 1333 MHz.

    http://h10032.www1.HP.com/CTG/manual/c02657339.PDF

    Issues related to the:

    The Crucial scan seems to direct me to the memory of better and faster that is listed in the Service Guide. My laptop took advantage of this Crucial memory to operate at faster speeds than the memory, I have now? What latency (CL) cases? I saw sticks to new Egg with CL = 9 instead of this Crucial CL = 11. CL is important? What I have to buy two Crucial 4 GB sticks or I can I keep my original 4 GB stick and add a Crucial 4 GB stick for my 8GB? Is Crucial memory memory low density -something I've read elsewhere that I need? FWIW, a diagnostic analysis of Norton said that my current memory is syncing to 1067 ns.

    I have also these two links below for key USB PNY to a Best Buy nearby. The first stick of memory PNY seems to correspond to the Crucial memory card. Is - this low density memory PNY memory? And yet once, can I buy a single stick of 4 GB and add to my current 4 GB stick? This 4 GB PNY stick below which seems to fit the profile of Crucial scan is what I would buy if he tell you it's compatible, because I can buy it at a Best Buy near and easily return it if it does not work:

    http://www.BestBuy.com/site/PNY-1-x-4GB-DDR3-low-voltage-notebook-memory/5745153.p?ID=1219153729590&...

    And here is the link to a second best buy PNY 4 GB stick whose plug appear to be closest to the Service of Guide specifications, but this stick may not be low voltage and it has less maximum MHz:

    http://www.BestBuy.com/site/PNY-4GB-DDR3-SDRAM-memory-module/3779273.p?ID=1218431615147&skuId=377927...

    Thank you for your help and your recommendations!

    Hello.  I'll answer my own questions in the last post above.  Fortunately, HP expert Paul Tikanen resolved my questions in a thread with the following response.  Thank you, Mr. Tikkanen!

    "The faster the memory will run in your laptop is at 1066 Mhz, which is the speed of the FSB of the i5 - 450 M.

    processor.

    http://Ark.Intel.com/products/49022/Intel-Core-i5-450M-processor-3M-cache-2_40-GHz?q=%20i5-450M

    So, my recommendation would be for you to buy a module of memory 4 GB DDR3 PC3 - 10600 (1333 MHz).

    Thus, even the 1333 MHz chip will only work at 1066 MHz.

    I had a lot of success with this configuration of brand and the memory chip.

    Regardless of the brand you download, make sure he's 8 the little black chips of memory on each side of the Board, not 4.

    http://www.newegg.com/Product/Product.aspx?Item=N82E16820231341 ".

  • Satellite A80 129 DVD-RAM write speed problem

    Hi all!

    I have a problem. the thing is that I want to write in NERO 6 (last version purchased) a CD or DVD, but we will only write to me at slow speeds. In this laptop I MAST * a DVD-RAM UJ-830 s with DVD-R 8 x and 24 x CD - R write speed said.

    When I try to write on a CD it gives me only 16 x write speed, then where is x 24? It goes same for DVD, as I want to burn DVDs and it gives me only 2 x write speed.

    Please, do not put this fault on a CD or DVD, cause in my country there are limited suppliers of this type of media, so I won't change my media. They worked with my previous PC CD - RW fine, no speed problem.

    I want to know also if this is lack of DVD - RAM, where then find firmware for this burner?

    Thanks for your replies.

    BR, Kekec

    You should try to update nero, it might solve the problem.

    Also an update of the firmware can help, go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home

  • Satellite M70 - la motherboard will support 800 RAM frequency?

    OK, here's my problem. I want to upgrade my laptop computer, the memory of s.

    The stick of RAM available alone, s speed DDR2 800. Can it work with my motherboard. 533 or 667 is not available. It's Toshiba satellite M 70.
    I downloaded CPU, motherboard and info current memory of SIW.

    http://rapidshare.com/files/178214230/mem.zip

    Thank you

    Sorry, buddy, but I think you have the wrong information. Satellite M70 can handle with max 2 GB of RAM and you can use 2 X DDR2 400/533 1 GB with PA3411U-1M1G part number

    Have you checked on the compatible modules in page Kingston?

  • RAM Y510 speed

    That the maximum speed of the bus the Y510 access RAM at? I know this fact 667 MHz on my own, but if she can go up to 800 MHz?

    These laptops are based on Intel 965 m and 960gl chipsets, and those can manage only SO-DIMM DDR2 533/677 mHz.

    Although you can insert RAM 800 mhz and it will work, its speed will be 677 mhz.

    Future mobile platforms will use the 800 mhz RAM.

  • HP laptop - 15-af123cl: number Maximum of ram and speed?

    What is the maximum amount of ram that I could install and what is the maximum speed I can get?

    Hello

    Data sheet: http://support.hp.com/us-en/product/HP-15-Notebook-PC-series/8543365/model/10303832/document/c04936081/

    Manual - go through page 1, 2, 44: http://h10032.www1.hp.com/ctg/Manual/c04653881

    Max 8 gb listed compatible. So, by taking the 2 GB of a location, replace with 4 GB of the exact same speed, configurations is the way to do it. Get the exact part of the HP same number listed manual is guaranteed compatible HP.

    Crucial, Kingston had their own online scanners which lists the compatible modules.

    I suggest that from 6 GB to 8 GB won't give you a big boost in performance. SSD instead of HARD drive would be the way I would go.

    Concerning

    Visruth

  • Increase the RAM in a Lenovo 3000 N500 - 3DG

    Hello.  I already bought a new laptop Lenovo 3000 N500 - 3DG, which has this memory RAM: 2 x 1 GB / max.4GB 667 MHz PC2 - 5300 DDR2 SDRAM SODIMM. I'm not an expert on computers and I wonder if someone could help me:

    (1) I want to increase my RAM. Than me, to add one or two GB would you recommend?

    (2) what brand (and specific model) of RAM should be better for this laptop?

    (3) how can I install on my computer? Could someone who did her before you explain to me how to do step by step (and if it was possible with graphics, prints to the fate or images).

    Thanks for your help and excuse my not correct English.

    Hola JotaEfe,
    (1) Windows 32 bit: it makes no sense to have more than 3 gigabytes of RAM

    (2) I added 2 G Kingston 800 Mhz PC2 - 6000 without problem (1 module) and removed 1 factory module 1 Giga of RAM.
    I wonder if changing the RAM at 800 Mhz RAM would run at 800 MHZ...

    (3) the operating instructions is in the manual (a very good indeed!)

    Good luck!

  • Acer Aspire 3680 RAM upgrade speed

    I have a 2 x 512 MB of RAM running on 533 DDR2 on Acer Aspire 3680. Do I need an upgrade to the speed of memory DDR2 667 on Acer Aspire 3680?

    Hello Charles,

    Thank you for reaching out to us to Microsoft Community.

    I understand that you want to know if need to upgrade RAM on your Acer Aspire 3680 laptop. Ideally, if you are facing problems with low performance or you want to speed up the performance of your computer, then it is considered a good idea to upgrade RAM.

    RAM is an acronym for "random access memory". The "random" part means that any byte of memory can be recovered without touching the previous byte.

    Note:

    If you are considering upgrading RAM, make sure that it is compatible with the motherboard of the computer as an incompatible RAM can result in no start-up situation. If you are not comfortable opening the laptop to insert the RAM, I would recommend that you contactAcer support for more information about the compatible RAM and also ask them to install the RAM on your computer.

    Hope that the information provided is useful. Let us know in case you need assistance while working in Windows.

  • RAM frequency and latency CASE

    So, in my bench, before having card problems mother, specs looked like this:

    5960 x CPU @3. 0 GHZ

    H105 Corsair cooler

    32 GB 2133 MHz DDR4 Crucial RAM

    MSI Gaming X99S 7 motherboard

    2 x NVIDIA GTX 970 s

    Pro SSD 256 GB Samsung 850 (start, Drive program) (SATA III)

    SSD Pro 1 TB GB Samsung 850 (Media (film Source of the layer), Cache media, preview the files, the export drive) (SATA III)

    Thermaltake 1000W PSU gold

    Once this motherboard died without apparent reason, the specifications changed a bit.  Everything remained the same, with the exception of the motherboard and RAM:

    ASUS X 99 Deluxe 3.1 Motherboard USB

    64GB 2666 MHz DDR4 Corsair Vengeance RAM.

    Now, all those who have used After Effects, they always say that 64GB will be substantially greater than 32 GB; I understand that.  However, what interests me about is the following:

    1. Is the frequency of the RAM-mark a difference in After Effects?  I'm not overclocking my CPU because of some experiences and big problems in the past, so I don't know if there is a difference between 2133 MHz and 2666 MHz.
    2. Latency case means anything in After Effects?  The old RAM Crucial was latency of 15 cases, while the Corsair vengeance RAM is 16 cases of latency.  I don't know what that means in terms of performance anywhere.

    So, basically, are either two things, I mentioned above will have a difference?  I know that 64 GB will be, but what about the frequency or latency case?  I don't have my machine back yet, so I could not test these things for me.

    I heard it is recommended to put your cache on a separate disc of your source media.

    I doubt you will notice a lot of difference in the performance of EI between both types of RAM that you mentioned.

  • Go to Windows 7 32 - bit on cursor wireless 3000 Y410 problem

    Hello

    I recently installed Windows 7 32 bit on my Lenovo Y410 and drivers work for the most part out of the box. However, I have a problem with the switch wireless slider. The switch does not respond when cold start (wireless stays off), but works very well to wake up from sleep mode. I tried Vista drivers of a Lenovo installation for the wireless card Intel, as well as the Bluetooth driver installation of BroadCom.

    Anything else I can try to install or change in the registry?

    Very appreciated

    tuks


  • Operation of the Bluetooth - 3000 Y410 7757 9RQ

    Friends,

    Recently I bought a Lenovo laptop model Y410 7757 9RQ. I installed XP OS inside. I am facing problem in the use of Bluetooth. I installed the driver for this model of download of www.lenovo.com/support. Yet, the bluetooth does not work. The message says "no Bluetooth device found. In fact, I access internet on my PC with the help of the phone mobile and bluetooth dongle BlueSoleil. Is it possible to access internet on my laptop, throw the external Bluetooth dongle because it is integrated in Y410 7757 9RQ bluetooth? In the affirmative, please let me know how.

    swapansarkar

    I also have the same problem with swapansarkar only, I'm always running Vista home. I have not uninstalled / whatever still installed on my laptop but when I tried to test bluetooth of my portable one get the same error message "couldn't find any bluetooth device" even though I've already shot by Bluetooth to the motorola phone. How to solve this problem?

    Thank you!

Maybe you are looking for