RAM operating at 75% plus__

Similar Questions

• SQL fire keep all data in the RAM operating system

  We tried inserts block on a cluster of 3 machine having 4 GB RAM each. As data has begun to increase, it also increases the RAM of the BONE and it does not release the used memory even after stopping the sqlf or the server... Although without exception have been observed in all the cluster log files.

  We also observed with the 'TOP' command the process of sqlf was do not consume more, then 8-9% of the total RAM on each machine.

  There are two issues here: -.

  (a) how we can free the memory of BONES after the largest insert operation part is finished or when it exceeds a threshold limit.

  (b) do I provide any specific parameter during creation of the table to achieve that goal, or need to configure certain parameters to the server sqlf

  Here is the structure of the table without index:-

  CREATE TABLE (TT)
  step_id varchar (10),
  parameter ID_OUTIL varchar (10),
  module_id varchar (10),
  lot_id varchar (10),
  substrate_id varchar (10),
  act_timestamp timestamp
  ))
  PARTITION BY COLUMN (step_id parameter ID_OUTIL module_id, lot_id, substrate_id)
  GROUPS OF SERVERS (SG1)
  EXPULSION OF LRUCOUNT 2 EVICTACTION OVERFLOW PERSISTENT;

  Please let us know if anyone has faces such question

  Hi Neeraj

  The 1.0.3 release just made on the public site so you can download it here: http://www.vmware.com/go/download-sqlfire

  Let me know if there is any problem in getting it.

  Thank you

  Felicia

• RAM for satellite Pro 4280

  Hello
  My englich is very, very bad!
  I have a SP4280 Pro satellite. I'm looking for this laptop RAM operation components. Is there a compatibility list? (Sorry, translate with babelfish :-((

  Thank you for the help

  Roland

  You can use modules from another manufacturer but the modules should support this card; * 144 pin SODIMM PC100 *.

  AFAIK you can use Max a 256 MB module.

• MacBook Pro A1260 will not be in service 9/10 times

  Got an A1260 of MacBook Pro which does not start until 9 / 10 times.  When you try to turn it on, the white sleep button flashes, optical drive makes noise, sleep button turn off, pause, turns on, then off again.  No boot chime sound unless it turns on with SUCCESS.  The computer battery died FYI.  The charger is original magsafe 85w.

  I have reset:

  SMC

  PRAM

  Re-seated memory (more info below)

  Removed all memory - let it beeps 10 - with a pause in between each beep.  Signals from the chip firmware is OK.

  Took off the keyboard and clean the computer with my compressor

  Check internal connections

  The first time I have reset the SMC, I was able to start on the first try.  When the computer was fine on the desktop, even though it is warm to the touch.  Memory in system information out like OK.  I checked the hard drive is good, etc..

  If I try to reboot the computer, 9/10 times it will restart It just stops.

  STOCK of 4 GB of memory:

  Went out the 1st module memory in SLOT 1 and it starts.  Do not restart correctly.  Started via the Start button / stop after his stop.  Second attempt to restart the desktop computer has failed.

  Put 2nd module from memory SLOT 2 INTO SLOT 1.  Did not start.  Come the second press, obtained in normal blue Mac screen, then it became black.

  * Removed 2nd module of memory *.

  Put 1 memory module in SLOT 2 - Startup successfully.  Do not restart correctly.  Has not pressed after his stop start to the first power.  Is not starting on the second power in a hurry.  Is No start to the third power in a hurry.

  Put 1 module of memory in SLOT 1 - Startup successfully.  Successful restarting #1.  Successful restarting #2.  Successful restarting #3.

  Replace 1 memory module in SLOT 2.  power button 4 press NO BOOT.

  Replace 1 memory module in SLOT 1.  power button 4 press NO BOOT.

  -

  I think here is the logic board is a failure - a common problem with this model.

  The computer is currently ONE with 1 stick of memory.  I had run it yesterday with both sticks in.  Once I tried to restart it, it wouldn't start up again.

  Purchase of a new Council of logic for this machine is not worth the money.  I'll probably the GPU to reflow.

  Any other suggestions?

  Seems you have to RAM operation.

  Replace RAM OEM or upgrade.

  https://eShop.MacSales.com/shop/Apple/memory/

  In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

• Ellitebook HP 2540p: memory upgrade

  Reclassification Elitebook 2540 P memory from 4 GB to 8 GB with (4GBx2) Kingston SODIMM DDR3 1600 MHZ 1.35v CL11 makes it unstable the laptop, it keeps restart continuously. The automatic message comes repairwill apperajust before the newspaper of the window on the screen and it will restart.

  When I replaced the previous memory it woks fine.

  Don't you think that speed (1600 MHZ) is the issue or something else? Anyone can help you.

  Hello

  Card, it supports DDR3 RAM operating at 1.5V and only 1333 MHz:

  http://WWW8.HP.com/h20195/v2/getpdf.aspx/4AA0-7783ESE.PDF?ver=1.0

  Now your new RAM does not match both. For some machines, this should be ok, but for elite machines that can be a problem

  Kind regards.

• Omen of HP 15: Sudden computer slow down

  Hello
  
  I have a laptop 15 Omen and here are my specs
  Intel Core i7-4710HQ CPU @ 2.50 GHz
  16 GB of Ram
  operating system 64-bit, x 64 based processor
  NIVIDIA Geforce 860 4 gig
  Windows 10
  
  I was able to run all my games without fault, battlefront, civ 5, ck2, total war, ect. as long as I've had this laptop.  About 6 days ago my laptop started behind all of these games (and other programs, sometimes even internet) to the point where games are totally unplayable.  I restarted my computer, I've updated my computer, I reinstalled my old drivers (those specifically on driver HP site), I defragged my computer, I ran several scans of complete system (McAfee and Windows security), I disabled my antivirus, I went into the Task Manager and the background apps closed, I reset my computer to an earlier date before the problem I changed the allocation of memory, I cleaned my fans and checked the operating temperatures, all to nothing does not. My computer can not always run games at all or normal programs as well (can't even properly run the HP support support).
  
  Overall, I'm extremely frustrated and I was wondering what you suggest that I do to solve this problem and get my computer back to normal.  I paid over $2,000 for this laptop, and I am very disappointed that I can't call anyone because I have had for over a year.  Needless to say that this very well maybe the last HP I bought the product.  This problem happened to me before.  The last time it was because HP has refused to update the system to be able to run the latest drivers from nividia.  Maybe this time it's the same thing.

  Zeddiclease

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about your recent performance problem and wanted to help - but we need more information.

  According to the page of the HP product for your laptop, it came with pre-installed Win8.1, not Win10.  Then, when you did the update of Win10?

  Also, from the beginning of this month, Microsoft pushed on the anniversary update (AU) and it causes a LOT of problems with people of whom Win10 machine behaved perfectly - until now.

  I had this happen to my PC and it worked Win10 from the early days of the preview of the initiate in August!  I had to do a repair of any installation new installation media for this works well, once again.

  Open a command window and type "winver" (without the quotes).  If you still use the November 2015 Win10 version, it will say build 10586; If you run the version of the AU, it will say 14393.

  We can proceed once you provide the information.
  
  Thank you

• Qosmio G40 memory problem

  Well, I had 4 GB of PC2-6400 ram to my laptop and it is a matching pair of DDR2, I inserted without problems and it works fine. But I get 3 GB I have a 32 bit OS and the other thing is, when I run CPU - Z it shows the RAM operating as 667 Mhz for a reason, the CPU has a FSB 800 MHz so technically it supports the ram to run at 800 Mhz, but it is not?

  On CPU - Z when I information from memory, it shows 2 different data sets for the ram 1 is 333 Mhz and the other 400 mhz, normally the ram underclocks if her dosent processor supports it, but in this case my cpu don't and it is always to be underclocked...?

  Can someone help me with this?

  Hello

  This topic has been discussed much about a thousand times here, and almost all the machines without worrying that model, this issue. Sometimes, you can get useful data when you use the * FUNCTION SEARCH * Forum.

  But I did some research for you and can for example give this link to microsoft for you:

  http://support.Microsoft.com/kb/929605/en-us

  Otherwise, if you want to learn more on this subject you must type only 4 GB in the search field of the search function.

  And then: reading happy :)

  Welcome them

• Can I upgrade my CPU now?

  Hey everybody:

  I think the upgrade of my compact dc7800 mini tower CPU of the current E4500 @ 2.20 GHz, for an E8500 3.16 GHz

  These chips are only $15, should I do it?

  (I already use graphics Radeon HD 6570 and 4 GB of DDR2 RAM at 333 MHz)

  The E8600 are twice the price to about $30

  Obviously, the only reason that I bring up the price of a $15 difference is because MONEY IS TIGHT RIGHT now.

  Apart from the slightly higher clock speed 3.33 GHz of E8600 against 3.13 GHz of the E8500, are there other benefits to E8600 on the E8500?

  My son uses this machine to the game and I use it for photoshop / lightroom.

  For the current hardware Windows experience index:

  Base score: 5.5

  Processor: Calculations per second: 5.5

  Memory (RAM): Operations per second memory: 5.5

  Graphics card: Desktop for Windows Aero performance: 6.7

  Graphics card: 3D Business and graphics of games: 6.7

  Primary hard disk: disk data transfer rate: 5.8

  Any suggestion is appreciated.

  You are the very welcome.

  If you can replace two chips 1 GB with 2 of 2 GB chips, you will have at least 6 GB.

  It will not change the speed of the memory, but at least you'd be to halfway there at maxing out at 8 GB memory PC2-6400.

  Memory will run at the slower speed of any one piece in there, so even if the two would be 800 MHz, they will work 667 MHz and 2 x 1 GB PC2-5300 chips.

  Yes, I don't know what it is with upgrades the processor I did.

  I have updated many of the processor socket 478 Pentium smoothly.

  I read a lot of "how to" tips for installing an LGA 775 processor and how to properly apply thermal paste.

  I tried different ways to apply the paste.  Grain size of the rice, X model, pea size...  Puree and slightly twisted the heatsink to spread in the dough.  Cleaned thoroughly heat surfaces with lint free wipes and 70% isopropyl alcohol... everything.

  The PC went very well, but if you have run windows experience index test, or put a load on the CPU, the fan would go into orbit!   They had run fine until I got my hands on them.

  I was upset because there was a large increase in performance, whenever I changed the Pentium 4 630 in the dc7600 to Pentium D 945.  But I like a nice quiet PC, and the fan must have kept idle during these processes.

  If you are not comfortable to upgrade the processor and you can hang 2 x 2 GB PC2 - 6400 chip memory for $30, I would go that route.

  I bought 4 of them... Excellent work.

  http://www.Newegg.com/product/product.aspx?item=N82E16820231203

• Why Fallout 3 crash after having launched a "new game".

  FO3 crashes after trying to start a new game.

  I have a HP Pavilion dv6 Notebook PC, Windows 7, Intel Core i3 processor - 2.13 GHz, 4 GB of RAM, operating system 64-bit, Intel, Graphics Media Accelerator HD w/1696 MB available graphic memory. I have the resolution of the game the same as that of windows (1366 x 768) and all other graphics options turned off. Is there something that I need of Bethesda, an update or patch? FO3 why plant them?

  Hello
   
  • You get an error message when the game crashes?
  • Installing the game went smoothly?
   
  I found that this game is not compatible with Windows 7. Here is the link to this topic.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=fallout%203
  
  I recommend you to uninstall the game and install it in Windows Vista compatibility mode and check.
  You can find more information on compatibility modes in the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-questions
   
  Let us check with bethesda if there is no work around for installing this game on Windows 7.
  Here is the link to support bethesda;
  http://support.bethsoft.com/eng/products.asp
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Photosmart C4480 printer cannot delete the queue

  The last two days, I'm more able to print.  I have a document in the queue, try to remove and it just stays there saying 'delete '.  I looked for new drivers, but the system tells me that I have the printer drivers the most up-to-date.  I have a laptop HP Pavilion DV6500 AMD Turion, 2 GB of RAM, operating system 32-bit, Vista Home Premium with service pack 2.  I ran Microsoft FixIt and it tells me that there is nothing wrong.  I tried to delete the printer and not he also says "delete" with no further action.  Aid to try to remove the file in the queue so that I can print again?  Thank you!

  Go to: Control Panel, printers, right click on your printer, then click on create a shortcut.

  G to: desktop, double-click your printer, click the printer in the menu, click Cancel all Documents.

• Dell Studio XPS 8000 - Asus Nvidia GeForce GTX 750 Ti Graphics Card

  Hi I have a Dell Studio XPS 8000. Information on the system it's an Intel i7 CPU 860-2.8 GHz 2.79 GHz and 6 GB of RAM. operating system 64-bit, x 64 based processor.

  I would like to know if I could adapt an Asus Nvidia GeForce GTX 750 Ti graphics (2 GB, GDDR5, PCI-Express 3.0) without any problem? Or is there a better option?

  The current map graphic is a GeForce GTS 240, that it came with.

  I searched the internet to find out that if that would be ok, but became confused if the power supply is sufficient, the appearance of it bed 350w max power. I can't find some people say no and Yes.

  My computer knowledge is Basic.

  Thanks for any help.

  You're better than replace the power supply Dell with a retail food more high wattage. Then the video card will be fine. Read your Manual for instructions.

• Windows 7 disk 100% for new files created recently

  Problem: I noticed that when new files are created on the computer the 'System' process reacts, usually a day later (date of arrival) by analyzing these files consume 100% of the disk IO and slow down the whole computer.  I develop software applications of scale with my computer so builds and release new records will create a large number of files.  The high disk activity can sometimes take 2 hours before it slows down.

  Things, I already checked: I have already concluded that this isn't the search indexer.  This isn't the Symantec anti-virus software, I installed.

  Computer details:  CORE I5, 8 GB of RAM, operating system Windows 7, Dell Latitude drive, is BitLockered

  E/s disk Details:

  Process - system

  Activity - seems to be scheduled to run in the morning

  Trigger - seems to be new files created previous day analysis

  Files with most of the activity of writing during this process-

  C:\$MFT (NTSF Master File Table),

  C:\$logfile (Journal of NTFS Volume).

  C:\pagefile.sys (swap file),

  Please let me know if this is something that I can regulate or if there are configuration that would allow me to have certain files ignored.

  Thank you.

  JBS

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

  
  

  Please run the trace when you encounter the problem

• After pressing F2 when I enter setup it resets date August 20, 2009 12:00 am one here it shows also the bios: video bios with a shadow: obscured. What is a problem for me?

  Hello

  I have a dell studio 1558 laptop, core i5, 7(home premium), 64-bit, 4 GB ram operating system windows, I bought it in 2010.Now I get a poblem when starting after each time that I stopped him. It shows a msg for installation or recovery and after pressing F2 when I enter setup it resets date August 20, 2009 12:00 am one here it shows also the bios: video bios with a shadow: obscured. What is a problem for me? and why the date changes it self with the precedent1 every time at startup? How solveb this problem?

  Original title: shady BIOS, video bios with a shadow

  You must reset the default BIOS and change the BIOS utility setup time. In most cases, it will solve this problem.

  More information about the BIOS: http://www.dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_148562

  If this does not resolve the problem, I think that the main problem is the battery from motherboard or Ram problem.

  It is best if you go to the Dell service center and tell about this problem.

• Windows 7 can't take of aero

  I have a problem for days, I have a windows 7 Ultimate edition 64 bit somehow, I got the task bar are grey.

  I try troubleshooting it told about my theme, but I can't change everything its on United States of America, I change high contrast white still does not work

  My computer has 82.1 GB of 285 GB. the computer is 3.3

  Processor calculations per second / under-score 5, 6

  Memory (ram) - operations of memory per second 5, 6

  Graphics performance of office for windows aero 3.3

  3d graphics and graphics performance 3.3 game company game

  Main hard drive - 5.3 of disk data transfer rate

  a the lowest determined by lowest subscore is 3.3

  Thanks for the help ;)

  Make sure that service theme runs on your computer.

  Start > Control Panel > system and security > administrative tools > Services

  Find and right-click on the "Thèmes" service and restart the service.

• I need the video/display drivers for my Dell Inspiron 6000 with Windows 8.

  I need the video/display drivers for my Dell Inspiron 6000 with Windows 8.  Laptop is the Intel Pentium M processor 2.00 GHz RAM, operating system, 32-bit on x 86.  My resolution is not at the right level and videos have hard play.

  I went to the ATI site and when I try to download their drivers, they will not be installed because they do not recognize the Windows 8 operating system.  The site of Dell's Windows XP operating system.
  Thanks for any help.
   
  [Moved from comments]

  Resolved - finally

  2 essential steps
  1 https://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&l=en&s=gen&docid=DSN_179256&isLegacy=true#Issue5
  Reconstructions of Dell should be loaded in a particular order until the drivers are installed, that is to say the controllers then the drivers for the chipset and resolution etc. They are specific to this.
  then;
  2 CharlesGrimes comment '... ". searching on my computer for the Dell under the old windows files and the old drivers were loaded. "I had tried this but not good. So went into a ghost of Dell image when the resolution was good on Win7, recovered files in windows/System32, which has old drivers. Does the update in graphic cards [Device Manager] driver and manually looked through above the files recovered from previous instal win7 and YES they charge this time.
  Oh what a relief to have a higher resolution. Experience had taught me how snappy Win8 is, I picked up a shortened bunch of ways to circumvent the operating system, and it is growing on me. WIN8 Pro works best on this old machine than its original Home XP and Win7.
  Thank you Carlos and others for your info that led to my positive resolution.