[RAM + VGA UPGRADE] Desktop Compaq DC 7600 Convertibile minitour PC

Similar Questions

• Help! Not clear the system specifications? Desktop compaq CQ5320Y... Want to upgrade CPU

  I have a Presario CQ5320Y desktop computer and I was looking at upgrading the processor to an AMD Phenom II X 4 965 Black Edition Deneb 3.4 GHz Quad-Core, in the specification system, it says the TDP is 95 Watts, but he has forward processer mentioned, who take 125 watts according to AMD, on the list of upgradable processor. I don't know if I blow on the motherboard or if it is designed to take this particular amoun just for this processor t?  Help!

  Here are the specifications of your desktop Compaq Presario CQ5320Y and its card mother M2N68-(Narra6). Based on the specifications, this model supports the following processors;

  Type of socket: AM3

  TDP: 95 watts

  AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

  AMD Phenom II X 3 Triple-Core (Heka) 7xx/7xxe

  AMD Phenom II X 2 5xx (Callisto)

  II AMD Athlon X 4 6xx/6xxe (undactylopodite)

  AMD Athlon II X 3 4xx/4xxe (Rana)

  AMD Athlon II X 2 2xx/2xxe (Regor)

  AMD Sempron 1xx (Sargas)

  It's very clear... the system supports a subset of the list up to a maximum of 95 watts. If the CPU is valued at more than 95 watts, it is not supported. In addition, "Black Edition" processors are not listed and therefore are not taken in charge.

  Please send Bravo

• How to reset market password on desktop compaq presario 5204

  I was given your desktop compaq presario 5204 a couple of years. I have never tried to use it until today so I can't ask the person who gave me the password.  When I try to start it I get a screen asking the power on password. How to reset it or remove? I want to donate it to the model railroad Club, I belong to, but it is useless this way.

  Disconnect the PC and open the case. Remove the RTC battery (money and the size of a dime), press the power button. Look near the battery for a jumper labelled clr cmos or something close. Remove the jumper and then put back in the same position.
  
  Please post your results.
  
  I couldn't find any information on the motherboard, but it's probably like virtually every other motherboard.
  
  Best regards
  ERICO

• Satellite A100-551 recognizes only 1 GB of RAM after upgrading memory

  Hello

  I just bought a memory of 1 GB of RAM to upgrade my Satellite 2 * 512 to 1 * 1024 + 1 * 512.
  The brand of memory is Crucial.

  Everywhere where I put my memory (1 GB in slot 1, 512 MB in the 2 slot or vice versa), my computer don't recognize only 1 GB.

  Some ideas on this concern?
  What I have to put the same size of memory in each slot, maybe?

  THX in advance for your help.

  Kind regards.

  SBL68

  If you only check this forum and search for RAM upgrade themes, you will see that the people who use essential modules reported on compatibility issues.
  If you want to upgrade to Ram successfully, please use the modules recommended Toshiba or Kingston.

  If you have to choose between price and compatibility compatibility and good work modules, you must choose. Compatible Toshiba DDR2 400/533 1 GB module followed the part number - PA3411U-1M1G.

  For Kingston modules, visit www.kingston.com/

  Good luck!

• COMPAQ 510 T1500 1.8 GHZ: CPU UPGRADE FOR COMPAQ 510 T1500 1.8 GHZ

  Hi, I want to improve my laptop cpu but do not know if the motherboard supports it and what upgrade options are compatible with the motherboard chipset

  Hello

  Double post, please use:

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/CPU-upgrade-for-Compaq-510-T1500-1-8-GHz/m-p/5505032

  Thank you.

• HP Compaq dc 7600 small form factor

  I wonder what could be the best video/card driver should I use to replace the old which has konked on me.

  The (former) was new when I put in about 8 years ago.

  Audio devices

  Name

  Driver ATI feature for high definition Audio - ATI AA01:

  Value

  HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1000\5 & 151BCC29 & 0 & 0001

  Again, my pc is one-

  HP Compaq dc 7600 small form factor

  I would like to spend less than $150.00 if I can't, for the best quality/driver card that I can use.

  I'm new here on the HP support site, so I don't know what to expect. I hope someone knows this kind of problem and can help out me. There are so many brands and types of cards I found, but I know little, if anything about each of them.

  Thank you for your answers and assistance.

  bgsrickus

  bgsrickus,

  This system has limitations of single graphics card.

  (1) small footprint of

  (2) max length 6.6 "

  (3) power Max 25W into the slot

  Low profile cards: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&N=100006662&isNodeId=1&Description=low+profile+video+cards&x=0&y=0

  You can make a product compare cards here http://www.hwcompare.com/414/radeon-hd-4350-vs-radeon-hd-5450/

  Source references:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c00376254&prodTypeId=12454&prodSeriesId=472277

  http://h18000.www1.HP.com/products/QuickSpecs/12253_div/12253_div.html

• How can I get an upgrade for compaq presario cq40 for video card Home premium 32-bit of windows 7?

  How can I get an upgrade for compaq presario cq40 for video card Home premium 32-bit of windows 7?

  Hello

  What is the model of your machine? (cq40 is a series). Anyway, please try this:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3805640#N228

  Kind regards.

• Questions about upgrading a Compaq Presario CQ5205Y desktop computer system

  Good evening

  I'm about to embark on my first serious upgrade of my computer, and I thought it would be a good idea to arrive before I get too far down the rabbit hole (and knocked out my Internet access).  What motivates the need to upgrade, it's that the system tends to lag when I programs using a lot of memory running and I think I can give him a decent boost on reasonably low budget.

  I have a desktop PC Compaq Presario CQ5205Y Win7-64 bit without modification until running.  I'm lookin to upgrade the CPU and the RAM of the machine.  For ease of reference, here is the page describing the system:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01859812&lang=en&cc=us&Conte...

  For the CPU, I found a good price on an AMD Phenom X 4 9750 2.4 GHz Quad-Core CPU (HD9750WCJ4BGH).  What I read, it meets the necessary criteria (socket AM2 + 95W, etc.).  I still need to determine if it needs a fan or non - language marketing indicates that it is not), but assuming that it works, here are my questions for this update:

  1 should I update the BIOS on the card, or change one of its parameters to recognize the new chip?

  2. with regard to the installation, I think that it's pretty simple - unlock/remove the Semprom LE-1300 that is there now, carefully align the new processor Phenom X 4 (Golden to golden triangle triangle) and tighten in place. Then, if necessary, install the fan/radiator.  Is this correct, or am I missing something important and potentially catastrophic?

  For the RAM, I have not bought, but I think I need barrettes 2x2gb DDR2 memory unbuffered, non - ECC memory.  I'm showing my ignorance here, but I imagine that rain is better in this case and is much better than the PC2-5300 memory PC2-6400.  If Yes, then maybe something like (or more affordable if I can find it):

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=6252562&CSID=_61

  Once again, a couple of very similar questions:

  1. do I need to change BIOS settings after I installed memory or if the automatic detection system?

  2. I swapped memory on other computers before so I guess that this motherboard is always the same - unclip/dethrone the existing memory, slide into the new and snap it in place.  Does this sound right?

  In my view, which covers everything I know, but if anyone has any other advice or warning indication, they would certainly be appreciated.

  Thanks in advance for help a beginner brave new waters.

  Processor:

  (1) no updated BIOS available for this model

  (2) more or less correct... you will need a HSF (heatsink & fan) for the new processor and a thermal paste. After the installation of the CPU, you apply the thermal is dedicated to the then install the HSF. The stock will be Sempron HSF to adapt and work but can not dissipate the extra heat

  (3) it is one of these models that will accept AM3 Athlon II and Phenom II CPU (see CPU upgrade in specs), but if it is supported depends on the revision of the motherboard and the BIOS version. Your choice of Phenom 9750 is a sure way to go

  Memory:

  (1) once again, no BIOS update available for this model

  (2) sounds right

  (3) you can look at Newegg.com best prices

  Please send Bravo

• Upgrade a Compaq Presario SR5710F desktop computer

  Hello, I'm recovering because as far as I can get out my Compaq Presario SR5710F desktop... right now there windows vista service pack 2 32-bit. The processor is an AMD Athlon 64 dual core 4450e to 2.3 GHz with 3 GB of ram at 800 MHz. First of all, since the processor is 64-bit, I was wondering if a windows 7 64 upgrade is recommended... Secondly, I know that even though I have a 64-bit processor, the maximum capacity of ram I have is 4 GB due to the motherboard, but with this card mother, is possible to increase the speed of greater than 800 MHz ram (for the motherboard specifications are hard to find). I was also thinking to replace the graphics card, but what I am seeing that will probably require a different diet and I am on a limited budget. Any suggestion? Please take into consideration the fact that this upgrade is not for games etc, its a home computer that I'm trying to be as updated as possible for a minimal cost. I am realistic, however, and I know it's an old PC. More I am not worried about existing programs (32-bit), I certainly intend on a new installation

  RickCraw,

  Here are the specifications of your Compaq Presario SR5710F desktop computer and its card mother MCP61PM-HM (Iris8). According to the specification, this model has PCIe x 16 graphics card slot and a 250 watt power supply.

  (1) most retail graphics cards require a 300 watts or more big power supply system to work properly. Install a new graphics card to detail will require the replacement of power supply as well.

  (2) Yes, you can install Windows 7 64 bit on this computer. I recommend the upgrade of RAM at a minimum of 4 GB for use with a Windows 64-bit operating system.

  (3) NO, you cannot change the speed of the RAM. Your system is limited to the following specifications/configurations of memory;

  Dual channel memory architecture

  Two connectors DIMM DDR2 240-pin

  Supported DIMM types:

  PC2-4200 (533 MHz)

  PC2-5300 (667 MHz)

  PC2-6400 (800 MHz)

  Memory non - ECC, unbuffered

  Supports DIMM DDR2 2 GB modules

  Supports up to 4 GB (2 x 2 GB = 4 GB)

  Please send Bravo

• HP Pavilion Media Center a1440: HP Pavilion Media Center a1440n Desktop PC ram compatibility upgrade

  Can I replace the ram (1 x pc-4200) original with 4 x1GB 240-pin DDR2 667 (PC2-5300) ECC SDRAM Desktop memory?

  Eastvanray, welcome to the forum.

  This is memory that is supported by the motherboard:

  Four connectors DIMM DDR2 240-pin

  Supports PC2-3200 (400 MHz), PC-4200 (533 MHz) and PC-5300 (667 MHz) DDR DIMM

  HP/Compaq approved maximum memory is 4 GB *.

  Note: * actual available memory may be less

  The memory that you want to install says it is ECC.  I think that the motherboard use more memory non - ECC.  Furthermore, I believe that your OS is 32-bit.  Therefore, only 3.25 GB of memory would be usable.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• 18-1106 in.: upgrade Desktop ram

  Hello, this is my first post, and I don't know if I'm posting in the right section

  I have HP 18-1106 in. all-in-one desktop and I want to improve his memory from 2 GB to 8 GB. I looked at my plug deskstops on the HP website and it said my PC supports the PC3-8500, but when I used the system scanner Crucial for the compatible rams for my PC it showed only the Rams PC3-12800, it made me confused and I don't know what type of ram can my PC support.

  My question is if I buy a PIN RAM 204 SODIMM PC3-12800, it'll work on my pc?

  I also tried to find PC3-8500, but they are expensive than PC3-12800.

  Model: HP 18 dekstop all-in-One in 1106

  Product number: H4J18AA #ACJ

  OS: Windows 8.1

  Currently installed ram: 2 GB

  -Gaud Sagar

  What is the installed processor?

  Your office has a discrete graphics adapter?

  Compatible memory. HP 4 GB modules

  http://www.upgradeable.co.nz/parts/UH1492.html

  (2 x 4GB) 8 GB

  http://www.upgradeable.com.au/HP-Compaq/HP-18-1106in-all-in-one.html

  Corsair does not make the modules memory compatible with your desktop computer.

  Kingston is a 4 GB module with a reasonable price. Number of part of Kingston KTH-X3BS / 4G see the following web document. Your AIO desktop computer has a motherboard identical, so it is a compatible memory module at a good price.

  http://www.Kingston.com/en/memory/search/default.aspx?DeviceType=2&MFR=hew&line=all-in-one&model=90792&description=Kingston_System_Specific_Memory_for_HP/Compaq_All-in-One_18-1105la

  This is a seller in your area that has the module.

  http://www.ipmart.com.my/main/product/Kingston_DDR3_1333MHz_HP_204_PINs_KTH_X3BS_4G_4GB_Kingston_Warranty_418693.php?prod=418693

• Compaq 6730 s: upgrade HP compaq 6730 s RAM (4 GB - > 8 GB)

  Hello

  I have a 7 years hp compaq 6730 s running windows and ubuntu. It has 4 GB of ddr2 ram (667 MHz, according to me, but I'm not course on this) and a dual processor Intel Centrino 64-bit. It still works great. But I have to run long analysis and many programs at the same time and that makes it sometimes slow down or even freeze. I was wondering if I should look more than an upgrade of RAM or an upgrade of the processor. I think the first, but I've never done before

  Thank you!

  Gonzalo

  Hello

  I run Lunix so I don't know how he manages memory. In other Word, I know that we can put the data in memory and eliminate the disk i/o - much, much, much faster but in this word RAM is still very, very expensive. Now, they will put flash card of new machines which is much less expensive to use for page and swap files. In short, more memory is good.

  Kind regards.

• Upgrade to 4 GB Ram problem - computer desktop OptiPlex 780...

  Nice day

  Thank you for your services.

  I am trying to upgrade my desktop computer model # OptiPlex 780 and it's the standard I force the affected elements before, after I check what is the speed of compatible ram, voltage and timing, then I bought this model:

  KHX1333C9D3B1K2 / 8G

  Sound of Kingston - hyper-x blue or you can check the details by the Munificent code above or visiting them this link:

  http://www.Kingston.com/datasheets/KHX1333C9D3B1K2_8G.PDF

  The problem:

  When I delete the original 2 GB Ram and installed this 4 GB ram on the first location, the departure of light 1 # & 3 led with sound as continuous hum without starter or windows interface.

  I tried to:

  -Change the slot

  -Fix the maximum ram which is 4 GB for each slot up to 16 GB

  -Correction of the original 2GB ram in slot 1 then fix the new ram in slot 2 or 3 and 4

  -Update the BIOS to version 15A and update all the drivers from dell.com

  -I make sure that the ram is compatible Guide Dell book on this link:

  http://i.Dell.com/sites/content/business/solutions/engineering-docs/en/documents/OptiPlex-780-tech-guide.PDF

  So please help me in this case, it is urgent and I used this computer in the main office and my work.

  Thanks and regards,

  BYQ-

  svanwormer

  I have a 780 with the Intel E7500, Q45 chipset and A15 BIOS CPU and I'm running 12 GB of DDR3 RAM. Two 4 GB and 2 GB

  Yep, catilley, I'm afraid, you're just wrong on this point - your info is old, apparently.  I, too, running an Optiplex 780 with an Intel Core 2 Quad 9550 CPU, chipset Q45 and 12 GB of DDR3 memory - in fact, it's the same machine that I write this response at this time.

  As I posted a year ago on this thread, the official manual of Service from Dell for Optiplex 780 confirms it will take up to 16 MB of memory DDR3, 4 GB per slot.  Here is the link, directly from the Dell website:

  

• HP Compaq dc7100 CMT: Upgrade RAM & OS upgrade to Windows 7

  Dear HP forums,

  The other day I was discussing with a HP Professional, on the RAM upgrades on my old PC now after chatting with them I had. Provide links to eBay (which I also included it):

  1. Crucial memory modules PC memory DDR 400 CL3 184-pin unbuffered 4 x 1 GB
  2. 4 GB (4x1Go) LOW DENSITY DDR PC-3200U Non Ecc 400 MHZ 184 PIN CL3 RAM MEMORY
  3. Crucial 2GB Kit (2x1GB) PC3200 DDR 400 184 PIN DIMM RAM (CT12864Z40B)
  4. DDR400 400 MHZ DIM 2 X 1 GB CRUCIAL KINGSTON PC MEMORY
  5. 3 BRANCHES... DE468A-HY (1 GB, PC3200 (DDR-400), DDR RAM, 400 MHz, DIMM (= 3Gb)

  Now, here's what the professional HP said email if:

  Spoiler (Highlight to read)

  Please fine the part number for the RAM module:
  
  1 GB DDR PC3200 of Synch Dram (DDR400) DE468G 512 MB DDR Synch Dram PC3200 (DDR400) DE467G 256 MB DDR Synch Dram PC3200 (DDR400) DE466G 128 MB DDR Synch Dram PC3200 (DDR400) DE465G

  Thank you again for contacting HP eSolutions.
  
  Kind regards
  (take the name for privacy reasons) UK & I customer support
  
  Thanks for choosing HP Inc.
  
  Details of our telephone support are:
  Ireland: 014118932
  UNITED KINGDOM: 02079490416
  
  For more information about the HP privacy practices, read the online privacy statement at www.hp.com/privacy.
  Our Board is strictly limited to the issue in question and is based on the information provided to us. Please read the disclaimer of HP support at www.hp.com/support/emaildisclaimers.

  Please fine the part number for the module of RAM: 1 GB DDR Synch Dram PC3200 (DDR400) DE468G 512 MB DDR Synch Dram PC3200 (DDR400) DE467G 256 MB DDR Synch Dram PC3200 (DDR400) DE466G 128 MB DDR Synch Dram PC3200 (DDR400) DE465G thank you again to contact HP eSolutions.Regards, UK (taking the name out for privacy reasons) & I SupportThank customer choosing a telephone support HP Inc.Our details are : Ireland: 014118932UK: 02079490416For information about the HP privacy practices, read privacy policy online at www.hp.com/privacy.Our advice is strictly limited to the questions asked and is based on the information provided to us. Please read the disclaimer of HP support to the www.hp.com/support/emaildisclaimers.

  The RAM is so cheap, that I had also NOT hundreds and hundreds of £££ buy RAM "official." Also once I have the RAM installed could I spend XP to Win7 or NOT?

  Yours faithfully,

  Ryan

  If my solution worked, as this message click Bravo! to show appreciation.
  
  I'm NOT an employee of HP, just a volunteer.
  
  http://h30434.www3.HP.com/PSG/
  

  Hi Ryan,

  Contact Crucial and Crucial official recommendation.  If you buy directly from Crucial, then they will stand behind their products.

  Your first consideration should be Support HP or HP sales during the consideration of upgrades or replacement of memory. If you want to consider other manufacturers of the best way to avoid memory problems is to contact one of the leading manufacturers of memory. I would recommend that you try the tools of these manufacturers: Corsair, Kingston andCrucial. Once you have determined the DIMMs that you need, then contact commercial or technical support to check that you have selected the correct DIMMS. If you buy directly from manufacturers, then they will stand behind their products.

  Microsoft Windows 7 Upgrade Advisor.

• Upgrading processor on the desktop Compaq Presario Media Center SR2019UK

  as stated above I'm looking to upgrade and I was wondering what was the taken cpu supported by my motherboard A8M2N - LA. On the motherboard

  specifications page

  http://support.HP.com/us-en/document/c00714578

  He mentioned that it supports AMD Athlon 64, Athlon 64 X 2 and Sempron processors. I was wondering if someone could send me a list of the athlon 64 X 2 processors support so I don't end up buying one that does not work...

  I checked the specifications of your computer system, and I see that you can upgrade the processor up to an Athlon 64 X 2 5000. Please contact any of the local stores for the same thing.

  Example:

  AMD Athlon 64 X 2 5000 Brisbane 2.6 GHz, 2 x 512 KB L2 Cache Socket AM2 65W Dual-Core processor - retail

  http://www.Newegg.com/product/product.aspx?item=N82E16819103211 & nm_mc = EMC-IGNEFL123008 & cm_mmc=EMC-IGNEFL123008-_-ProcessorsDesktops-_-LB3C-_-19103211

  Once you buy the processor, please follow the steps in the link given below to replace the processor.
  http://support.HP.com/us-en/document/bph07139

  In addition, if your PC still uses the original PC4200 (533 MHz) DDR2 RAM, I highly recommend to replace

  with more quick PC5300 (667 MHz) DDR2 RAM (1.8 volts).

  Example:

  CORSAIR ValueSelect 2 GB (2 x 1 GB) 240-pin DDR2 SDRAM DDR2 667 (PC2 5300) memory Fund - retail

  http://www.Newegg.com/product/product.aspx?item=N82E16820145098