Random L2TP connection problem for server 2008 R2

Similar Questions

• Driver problem: Windows Server 2008 R2 on server T110 II with PERC S300 (RAID10)

  I have the Dell PowerEdge T110 II server with PERC S300 RAID card.  I installed 4 hard drives & them set on RAID10 in initial configuration.  The card mother recognizes the PCI-E card, which in turn recognizes readers.

  I pop in the Windows Server 2008 R2 DVD and I start from DVD, but when I get to the part where I have to choose a file location, it appears that he is not a player available.  There is another option to add a driver.  Then I went on the site ( http://tinyurl.com/PercS300driver) downloaded appropriate driver, added to USB & when I get to this screen, I'm trying to add the driver.  However, he said "there is no signed in this folder drivers."

  Does anyone know what I might be missing?

  You are using the wrong driver.  The one you linked to says it's for Server 2008 x 86.  As 2008 R2 64-bit only, there is no way it will work.  Use this driver for 2008 R2 (you must change the drop down menu on site driver downloads / to the correct operating system):

  www.dell.com/.../DriverDetails

  Be sure to run first to extract it, and then put the contents extracted on your CD/DVD/USB for use with the link to load a driver.

• How to create a connection for Toolkit CVI/SQL string when connecting to SQL Server 2008

  I tried to connect to my database of MS SQL Server 2008 for two days using the CVI/SQL Toolbox with no luck.  I use the function of connection BD and I tried a lot of different formats for the connection string with no luck.  I get an error "SQL Server doesn't exist or the access denied" after a long pause, trying to connect.  Anyone know what's the right format for this string?  I even setup of SQL Server on my local machine and I still not able to get the right format for the connection string.

  -Tom

  I have successfully connected to the database, I thank you all for your help.  It was a combination of errors of syntax and configurations that had to be changed.

• Problem with Server 2008 window after delete "pending.xml" not a good way.

  Hello

  Actually, I was stuck at stage 3 of 3 window 2008 Server Update. I solved this problem by performed only "del c:\windows\winsxs\pending.xml" on the installation disc - invite to dot. After that, I could access my desktop. But there was another problem occur as shown below:

  (1) I could update the file in the window, but I could not update the last update file that is the window Server 2008 previously stuck.

  (2) network icon shows no internet connection, but I have always seen my ip address in internet explore and remote computer could still connected, but displays error cannot access the office. I double click on the network icon, it shows "Unknow" "the dependency service or group could start. I can't not verification of diagnosis. It shows me start "policy and network access Service" in the Services. I try but pop up error message.

  (3) in the Server Manager, role summary shows Red Cross serving files, network and Access Services, Terminal Server Services strategy and the Web

  Server (IIS).

  (4) antivirus software cannot start properly.

  You have an idea to solve my problem?

  Thank you very much and best regards, Teresa.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Failed to connect to the user when it connects to SQL Server 2008 R2 gateway

  Hi - This is my first post!

  I have problems to connect to a SQL Server 2008 R2 to Oracle database 11 g R2 database, use the product of the gateway.

  Previously, he has worked, but we moved the database SQL 2005 to 2008 (R2).

  We receive this error while trying to query through the link (Select * FROM DUAL@ADSRD)

  ORA-01017: name of user and password invalid. connection refused

  [Oracle] [ODBC SQL Server driver] [SQL Server] Failed to connect to the user 'SQLUSER '. {NativeErr 28000, = 18456} [Oracle] [ODBC SQL Server driver] Invalid connection string attribute {01 S 00}

  ORA-02063: preceding 2 lines of ADSRD

  01017 00000 - "invalid username/password; connection refused '.

  * Cause:

  * Action:

  Error on line: 1 column: 35

  The DG4MSQL configuration is here:

  HS_FDS_CONNECT_INFO = //SSU_PRD_APP/IntegrationStagingDb [BSYS-sql2]

  HS_FDS_TRACE_LEVEL = OFF

  HD_TRANSACTION_MODEL = READ_ONLY

  #HS_FDS_DELAYED_OPEN = FALSE

  HS_FDS_FETCH_ROWS = 100

  HS_OPEN_CURSORS = 50

  
  

  The database is hosted in its own instance on the sql2-BSYS Server

  Then... on the SQL Server event logs returns this:

  Failed to connect to the user 'SQLUSER '. Reason: Failed to try to connect using SQL authentication. Server is configured for Windows authentication only. [CLIENT: 192.168.10.179]

  However, the SQL Instance IS configured to enable mixed mode authentication.

  I can't work on what I missed, and I can confirm if I'm actually to a compatibility issue between the gateway and the version of SQL server, that we are now trying to connect.

  Help please!

  Is the user name in your SQL Server database in the capital, mixed mode letters or small letters?

  Currently, you have created a database link that tries to authenticate on the server SQL using SQLUSER in capital letters. If you use mixed or small letters, so be sure to write the user name (and password) as it is in the create database link statement and surround it with double quotes.

  If you have created the link of database correctly, try an ODBC connection for example from your client and add the user name and password. Does it work?

  -Klaus

• RAM problem in Server 2008 R2 Ent Version

  Hi friends,

  We have server HP ProLiant DL580 G7 with OS server 2008 R2 64 Bit Enterprise Version. On this server total RAM is 64 GB, which only 16 GB of memory usable is showing.

  Performed troubleshooting:

  1. Update server BIOS version.

  2 installed the latest operating system patches.

  3. all newspapers of material shared with the team of HP.

  After all steps above still question is the same. If one has the solution for this problem, please help me.

  
  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Connection Internet sharing server 2008 R2

  Hello.

  First sorry my bad English. I have Server 2008 r2 without active directory, or you can tell unmanaged server. I have about 10 customers connected with the server through the network wireless access point. 2 days ago I reinstalled server 2 k 8 r2 and sharing internet connection enabled. at the time of closing, I turned off server and access and dsl modem point too. the next day when I went to the server and all clients, not one of the clients can access server else I have untick the Sharing ICS tab and check back for re turn on ICS. IM frustrated. Help, please

  This has nothing to do with Email and Windows 7.

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Y at - it a x 86 version of the patch KB2852386 for Server 2008?

  I want to run the cleaning utility disk with the updated Windows Cleanup option selected, according to the https://support.microsoft.com/en-us/kb/2852386.   My winsxs folder is too big

  I have an old 32-bit machine running Server 2008 SP2.  But he has no patch for x 86 listed for download.  Windows 7 x 86 patch does not install.   Are there options here?

  Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Internet for Server 2008 evaluation disc

  I'm re-reading manuals for Microsoft Server 2008. I have a Server 2008 installed on my laptop HP ProBook 6545 b assessment.

  I can't get the wired or wireless internet to work.

  Do I need drivers or need to activate a Server 2008 service?

  If I need drivers, where can I find them?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Is there a copy available for free download 32-bit version for Server 2008 r2 evaluation?

  Hi guys... Server operating system works well with 64-bit systems, but I have a 32-bit computer so I wanted to know if there is a 32-bit version of windows 2008 r2 evaluation copy on the server for free download? I had downloaded one of http://technet.microsoft.com/en-us/evalcenter/dd459137.aspx but that din't work... lets c... see you soon

  http://www.Microsoft.com/en-us/server-cloud/Windows-Server/2008-R2-trial.aspx

• Problems with Server 2008 R2 Kerberos with Mac and CentOS machines? Need to re - join domain

  We are having a problem with our Mac and Linux / CentOS machines constantly having to be re-attached to our AD domain.
  We are able to join machines to the domain successfully, but after a few weeks or if authentication is broken and we again join them to the domain.
  I see Security event logs on our domain controller when kerberos authentication fails.
  On the linux server - I see this message in the logs
  -binding failed: server not found in the kerberos database.

  I'm guessing this has to do with Server 2008 R2 and incompatible mac / linux versions.

  Any ideas?

  Hello

  I suggest you try to post the question in the forums and check them off below if it helps:

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  It will be useful.

• Cannot get activation for Server 2008 (network attached) phone number, because the error 0x8010002E stops the process.

  I'm trying to get the phone number and the information that I need to activate an installation of Server 2008. The server is my DC and sits on a closed network cannot reach the Internet. The installation was interrupted for more than 60 days, so to request activation. I'm not allowed to modify the current installation (i.e. relocation Server 2008). I have my current PID.

  When I go through the activation process, it fails with the error 0x8010002E. It gives me all the options for offline activation. The error code is for 'Lack of Smart Card Reader'. It's my DC so he shouldn't use a smart card to log on or to make administrative functions due to possible failure with the card reader software.

  How can I do it manually with these questions offline activation?

  I'm trying to get the phone number and the information that I need to activate an installation of Server 2008. The server is my DC and sits on a closed network cannot reach the Internet. The installation was interrupted for more than 60 days, so to request activation. I'm not allowed to modify the current installation (i.e. relocation Server 2008). I have my current PID.

  When I go through the activation process, it fails with the error 0x8010002E. It gives me all the options for offline activation. The error code is for 'Lack of Smart Card Reader'. It's my DC so he shouldn't use a smart card to log on or to make administrative functions due to possible failure with the card reader software.

  How can I do it manually with these questions offline activation?

  Hey bito808

  Here is the vista forums

  Try Server forums

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  Walter, the time zone traveller

• Adobe Reader for the DC for Server 2008, 32-bit

  I want to upgrade my Adobe Reader software for the new domain on my Server 2008 controller (not R2) 32-bit but it is not available.  Can I use a different version to upgrade the player software?

  Hi Jeff Kellis

  I'm sorry, but the CD player is not compatible on Server 2008.

  You can install the XI player from the below mentioned link:

  Adobe Acrobat Reader DC install for all versions

  

  Kind regards

  Ana Maria

• Download Oracle Database 10g (10.2.0.4.0) for Server 2008 R2

  Hi all.
  
  I am a beginner, I need to know:
  Where can I download Oracle Database 10 g Release 2 (10.2.0.4.0) for Microsoft Windows Server 2008 R2 x 64, as oracle download page is more downloadable.
  
  THX.

  >
  Where can I download Oracle Database 10 g Release 2 (10.2.0.4.0) for Microsoft Windows Server 2008 R2 x 64, as oracle download page is more downloadable.
  >
  You must contact Oracle support and provide your credentials of accounts of MOS. They will send you a link that can be used to download the product.

• Software RAID for Server 2008

  I have a PC that I want to load Server 2008, with two sets of HDD of 250 GB in RAID 1. My motherboard doesn't support RAID 1, can I find a software RAID that will work with Server 2008?

  What I found which seems to have worked. I installed the two 250 GB HARD drive. Then the loading of Windows Server 2008 R2 SP1, when he asked which will lead to load on, I chose the disk 0. After completing the installation of Windows, I went to disk management. I saw a disk 0 by a system reserved 100 MB, a C: drive with 232,79 GB type base and a GB 1, unallocated, 232,88.

  I have converted the disk 0 to dynamic. Right-click Disk 0, select Convert to dynamic disk.

  Then I have a right on the C: drive and selected click Add Mirror, selected disk 1, ok/next, then it C: mirrored on both drives. He left 100MB on disk 1 unallocated.