Randomization of branching

Similar Questions

• I want to ask you have a branch in Jordan please

  I would like to ask do you branch in Jordan

  You do not discuss Apple here, this is a user to user support forum.

  Basem alyaseen wrote:

  I would like to ask do you branch in Jordan

  What kind of branch, detail, taken in charge? You can locate the retail locations here, looking at http://www.apple.com/retail and if you are looking for support, see here. Contact Apple for support and service - Apple Support

• Automatic resizing of any menu offshoot "police" when the slider opens a menu of branching. How can I fix it?

  I reinstalled Firefox and remove all data and the question still arises. Sizing is really big and really small, for first branching menu if there is a second offshoot. The cycle is repeated for a third and so on. The problem only affects the connection pop-up menu and not the rest of the Firefox page. The error is hard to describe, so I downloaded a picture of the first connection error using windows 7 the cutting tool.
  http://oi49.Tinypic.com/35idehh.jpg

  A solution will be appreciated.

  -Richard

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• How does the 'branched out in a new discussion?

  At the beginning of the Apple Discussions pages I see "Phaca to a new discussion.  How does this work?  What is this for?

  The reason I ask, it is a discussion that I launched five years in the community of Snow Leopard is underway and El Capitan along with all other versions of OS X since 10.5.  This discussion of Snow Leopard should be branched to a discussion of El Capitan to keep up-to-date?

  This means that a divided host part of the thread in another; It is usually, but not always, because this part broke the Council decides.

  (142094)

• Automator - randomize the file names

  Hello

  I created a service to randomize the file in a folder, randomize their file names:

  I created a shell using Automator script:

  Shell: / bin/bash cd '$1' for I in *.jpg; make $ mv RANDOM.jpg $i; fact

  I have registered as a service and also add a keyboard shortcut to use in selecting a folder to randomize the files it contains.

  It works and change all the names with random numbers and replace the original files.

  the problem is discovered only when I randomize large number of files (smth like 400-600), some files are missing from the file. No idea why?

  I ask why you are doing this, but you have taken no precautions to ensure that the same name will not be used twice. If this is the case, the first file to give this name will be overwritten.

• OOP - how to pass variables between the branches of the object, but not instances of VI

  I have a main VI where a thread object goes through some subVIs initialization and then branches off into several parallel loops. My understanding is that each branch becomes a separate instance of the object. Data is passed between the loops using global variables, wrapped in the accessors (I can change this if someone has a better approach - reducing to a minimum the memory and the CPU usage is very important).

  I need to have a large number of instances of the main VI running at the same time. What would be the best way to ensure that the data transmitted between the loops of one instance of VI do not interfere with the data transmitted between the loops of another instance of VI?

  Thank you for your understanding.

  Ah, you're right. Stupid mistake on my part. It's all working now. The corrected code is attached.

• LabVIEW and Perforce branching

  Hello

  I want to use Perforce branching with LabVIEW development capabilities. It seems quite difficult (if possible).

  Anyone have experience on this feature?

  with thanks a lot

  Philippe

  If it's like Subversion, it is really easy, because the branch only exists in the database. In subversion, you create a branch, and all checkin and outs will be to this branch until you merge to the trunk. It then compares the versions to the trunk as any other checkin.

  /Y

• Force Windows 7 install branch LDR/QFE Hotfix (reg entry?)

  Acording to KB897225 , you can use the registry to force updates to fix Internet Explorer to install the QFE versus files an update/patch LDR branch

  1. Click Start , click run , type regedit in the Open box, and then click OK .
  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer
  3. Point to new , click DWORD value , type QFEInstalled to name the registry entry, and then press ENTER.
  4. Right-click QFEInstalled , click modify , type 1 in the value data box to assign a value of 1 to the registry entry and then click OK.

  Question: Is there a similar registry entry that will force Windows XP , Vista or 7 updates to day doing the same thing, instead of the version of GDR files, it installs the version of LDR branch?

  Hello

  you are also a member of phpcs.com. Cluberti answered present year last for Vista/7. You must extract the cab and use pkgmgr.exe to install the update_bf.mum (http://www.msfn.org/board/index.php?showtopic=136644).

  For XP, you must use the /B switch (/ b:SP3QFE), if you want to force the Installation of the hotfix QFE version.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• try to photograph a sunset through the tree branches, but the camera will not focus correctly

  I have a SX50HS, I'm trying to take a zoom of the sunset through trees, but the camera will be only focus on the branches... trying to get the Sun in short

  I agree with the manual focus to infinity. I think that you will have little problem get enough light in the camera for a fast shutter if you are shooting and counting of the Sun!

  Something will have to be badly exposed, because the Sun is so bright, and the hidden tree side is not. If you meter the Sun get beautiful orange, the tree will be a dark figure. Adjust the exposure for the sky a little left or right of the Sun, not the sun itself for best results. I'm not used to the Powershot cameras, f/5 might work, but on a DSLR, you would probably like an opening narrower, like f/8 or f/11 or even higher.

  This is probably the way to go rather than dosage for the tree and saw the sky blown completely out., but you can try both ways for fun.

  Good luck!

• SPA9000, SPA400 and SPA942 on branch?

  Hello

  We are looking for a cheap solution for a telephone system that meets the following criteria:

  1 headquarters and 3 branches

  intend to use analogue lines pstn (3 lines)

  In addition to the facilities mentioned in the above topic, whatelse are necessary in order to implement this system across all industries? they won't use ITSP.

  the limited SPA942 4 was only in the initial version of the SPA9000 but that has changed since... now, you can get maximum support 16 behind the SPA9000 IP phones

  You cannot configure all 4 branches as a network if you have more than one SPA9000...

• How can I get Mahjong Titans to randomize tile placement?

  How can I get Mahjong Titans to randomize the placement of tile in each presentation.  It seems that whenever I chose a layout, I get the same tile scheme and have to keep reselecting the provision, which produces the placement of tile predefined following until I finally get to one that I have not played.  Without randomization, it's virtually worthless after the first week.

  There also seem to be some patterns that appear any iteration of a layout, I generate (for example, in the turtle, regardless of the tile is at the top of the heap will have a matching tile among the four tiles it is sitting on).  You can very well play on movements of opening with closed eyes for each version of each layout.

  -OccupyTheWeb

  Hello

  You can check the link for randomize tile placement in Mahjong Titans.
  Mahjong Titans: how to play
  http://Windows.Microsoft.com/en-us/Windows-Vista/Mahjong-Titans-how-to-play

• Branch HP4500 black new ink cartridge does not work

  I have the HP Officejet 4500 series printer. When I repaled branch HP 901 black cartridge is new, the alignment page went without black, undetected illustrated message text. I went through all the step to check the ink level, to clean the print head, troubleshooting... .but was frustrated. The b & w document print at all. Please advice. Thank you very much.

  What is the warranty ends on the day on the cartridge? (AAAA/MM/JJ) If it is under warranty I had advice contact our telephone support HP...

  

• Branch call PSTN routing

  Client of HQ and Branch office with 512 line MPLS to only HQ they had E1 trunk, branch to call PSTN the call had to go via MPLS in HQ and the call RTC branch terminated at HQ only, is it a good design or better we need to add an ISDN line at the level of the branch to end the PSTN call.

  in terms of good design, it is not

  because this design has some imitations like below

  1-single point of failure, if the MPLS link is near the bottom of the branch cannot be accessed via PSTN and they will lose access to the PSTN, too

  2 - the MPLS link will be as a bottleneck for this branch because the PSTN and onnet calls will go on the PSTN connection

  However if this is due to the customers needs/budget then you can do it like that, but don't forget to mention the recommendations for local PSTN

  HTH

  If useful rates

• DMVPN Solution for 50 Branches...

  Hi all

  We have about 40 branches and a Central data center.
  each office is connected with the domain controller and all internet traffic passed and filtered between DC and the Central firewall.
  We have VoiP, with a Central in DC call manager.
  our data are in DC, except some of the offices that have their own file server.
  RDP is also continue to use.

  Now, one day, we have a MPLS network linking all of our offices.

  I do a search about to implement a DMVPN for all, or as a second solution to some of our offices (the small one).
  How can you recommend or kind one or the other solution?

  as I read, the voice traffic is the most critical and the most difficult to manage with the ISP and DMVPN Solution.

  I would really apriciate your opinion.

  Kind regards
  Thomas.

  PS
  I chose cause DMVPN we have in the near future to have a backup of our DC in a second office, only for some of the critics of the data and services.
  That's why I think to use the DMVPN with 2 Hubs

  Yes you can run it on the Internet.  Yes, you may have questions of VoIP.

  A solution that we used in the past is double internet connections.  You dedicate one VoIP and one for everything else.  Always much cheaper than MPLS.

  You can also use Pfr (routing performance) to select the circuit to use based on the latency and jitter, and the type of traffic.

  http://docwiki.Cisco.com/wiki/PfR3:solutions:Iwan

• To access the branches connected to the main office using VPN L2L by RA VPN

  Hi all

  I am trying to configure access to several remote sites for users that VPN in our main data center.  The data center has a 5520, and branches are connected via L2L IPSec VPN.  All branches have 5505 or 5510.  Remote users use IPSec via the remote Client to Cisco.  In our data center works and L2L VPN remote access are perfect... only now that I need remote users access to branches

  after remote access VPNing (of support), I can't work the part.

  Any help would be appreciated!

  Thank you

  Vpn client access management office subnet via the main ASA site, you must configure the following:

  (1) If you have split tunnel, it must include the branch subnet in the tunnel of split ACL.

  2) allow to "permit same-security-traffic intra-interface" on the main ASA site.

  (3) configure the pool of the vpn client subnet in the lan-to-lan tunnel to the branch.

  On the main site, crypto ACL to one of the branch should say:

  ip licensing

  On the site of the Directorate, crypto ACL to the main site should say:

  ip licensing

  (4) on the site of the Directorate, should also include NAT exemption between the branch subnet to the pool of the vpn subnet.

  (5) after all the changes above, you need to clear the tunnel, so the ipsec lan-to-lan tunnel recover with the new subnet included.

  Hope that helps.