To access the branches connected to the main office using VPN L2L by RA VPN

Similar Questions

• set up a branch to the main ethernet using Airport Extreme network

  Could someone help me with this network configuration please?

  I rent an office and we have an ethernet cable coming into our building to the main network (a fiber broadband building next door). The ethernet line give you IP addresses and internet link.

  I would like to set up our own network in our building-

  1 / would put an Airport Extreme there is the ethernet cable and then plug the cable into the WAN port

  2 / I would implement the EA to distribute IP addresses, but using a different pool - so if the main building uses 192.168.1.1 to 192.168.1.256, I would be created my AE to use 10.1.1.1 to 10.1.1.256

  3 / I would then run an ethernet cable between the port LAN on EI to my Netgear 24 port switch.

  4 / I would connect all our other airport extreme and express again our Ethernet switch and put them all to 'bridge mode '. The switch ethernet cables may be connected to the WAN ports on these airports.

  Anyone see any problem here? We would just to have control over our own IP addresses and be able to restart our Airport Extreme, if we must, do not rely on the building next door to the distribution of intellectual property. I know still need to answer on them for the internet connection, but that's fine.

  Thank you!

  It should work. It would be the basis of a network of mobile type.

  A word of caution. With the exception of the "main" AirPort Extreme that performs as a router, connect the other base stations using their respective ports of LAN. We found some inconsistencies when a base station is in bridge mode and the connection is their WAN port.

• Access the main object of a SWF file in memory

  Hey.
  
  I'm trying to access the main object of a SWF file in memory. Consider the following code:
  
  package test {}
  import flash.display.Sprite;
  import flash.utils.ByteArray;
  
  SerializableAttribute public class Main extends Sprite {}
  public void Main (): void {}
  var b:ByteArray = new ByteArray();
  b.writeObject (this); This main object is what I'm trying to access
  }
  }
  }
  
  However, when I do a trace (b.length), the value I get does not match the length of the actual SWF file, then perhaps that there is another way.
  
  I am trying to achieve the same type of content that you would get if you load an external SWF using loadBytes, unless I want to access the principal object of SWF (running in memory) in this way.
  
  I have this even possible?
  
  Thank you.

  Hey.

  Well, I never knew a solution to it (if it is still possible to what I asked). However, I believe that I've implemented a workaround solution that should be enough for my needs. Perhaps it may help someone else too:

  Although I can not (seem to) get the SWF running access itself to memory, I can load another copy of itself. When I tested the copy loaded (in memory) and compared with the content of the file on the disk, using a hex editor, content match!

  This allows me to do things like control totals and which do not. An implementation is to use this technique to guard against the 'cache-hacking' of sovereign wealth funds.

• I have the home Prenium and can't access the themes or use photos etc on desktop.

  I have Home Premium and can't access the themes or use photos etc on the desktop. All I have is a black screen. Also, I can't save screensavers, including by default. What is going on?

  Lisa

  Black screen after that Cruiser connection still works
  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/d47aece7-5e12-46EC-8d3e-e8671730a7ce

  If still no joy try this thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Desktop-stuck-on-solid-colours-win-7-Pro/8e034d73-fbaf-45CD-a8eb-d8329e7f47e4

  If you have AVG see this.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/no-longer-see-thumbnails-for-applications-on-the/2b0a71ac-E75A-44a2-9198-2ac803644540

• Cannot access the internal resources for VPN site-to-site

  We have two ASA.  We set up just VPN site-to-site.  For some reason, we are not able to access internal resources at the main office of the remote office.  Do you have any suggestions?  Thank you.

  as wu suggested, please first confirm that the tunnel is mounted correctly

  "sh cry isa his '-> will tell u if the phase 1 is in place

  "sh cry ips its '-> say if phase 2 is in place

  now once they r upward, when you ping from site to site b

  program in the site, you should see one and decaps site b for traffic from a to b and vice versa for return transportation

  Now we have to see where it is a failure

  could be tht package is coming up to the asa but not getting is not encrypted or that the package does not come to the asa itself

  You can run tracer package to see if it's getting wrapped, or in other words hits vpn tunnel

  It might be a nat problem, and sometimes if it is a new configuration probably ISP may have blocked the esp traffic in one direction or in the other direction

  the best approach, that it is turn on "management of access to the inside" on the firewall and make a ping of source of asa

  inside ping

• WIRELESS IS CONNECTED BUT TRENDY TOP COMPUTERS WON'T RECOGNIZE EXTERNAL HARD DISKS ATTACHED TO THE MAIN OFFICE

  (desktop) computer main and two other laptops running windows xp

  all computers are connected to a common wireless network

  two external hard drives are connected to the main computer

  No laptop computer connected to the wireless network will recogniae

  external hard drives

  the hard drives are configured as shared

  What version of XP (Home, Pro, Media Center) and what service pack is installed?

  If you have XP Pro or XP Media Center, is simple file sharing on or off?

  Can you share other files and printers among the 3 computers?

  You try to share the directory root of the external drives (for example, E:\ and F:\)?  Note that "computer administrators can only share the root of the drive. See http://support.microsoft.com/kb/304040

  All computers are in the same subnet?  On each computer, open a command prompt window and type
  ipconfig {press Enter}

  You will see something like this (if the office is wired rather than wireless, the output so that it will display something like 'Card Ethernet connection to the Local network'):

  Ethernet adapter wireless network connection:

  Connection specific DNS suffix. :
  ... The IP address: 192.168.1.102
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.

  All 3 computers should have the identical "default gateway".  Each computer must have an IP address that has the same 3 initial bytes as the default gateway.  In the example above, this means that everyone should have an IP address that resembles 192.168.1.xxx.

  See this old but still relevant to old MS MVP Malke networking advice:

  File sharing / print

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• How to access the main .mxml file component control?

  I have a .mxml main while in which I imported custom "popUpWindow" component using the statement "import components.popUpWindow". In main .mxml file, I show more later this component in the form of pop-up window using the Popup Manager class:
  
  var popUpWin:IFlexDisplayObject;
  popUpWin = PopUpManager.createPopUp (Thi, popUpWindow, true);
  
  Once the component is displayed, how can I access using the actionscript component TextInput control (specifically the .text property) my main .mxml file?
  
  Thank you

  bdeen I think you have it bad: P I think he wants to access a property in the main application window.

  Give the textInput id and then on your main application you can do this for example:

  var test: String = popUpWin.textInputName.text;

  Please note that it is recommended to do a casting for the popup window:
  popUpWin = popUpWindow (PopUpManager.createPopUp (Thi, popUpWindow, true));

• Windows 7 Internet on the main office/main screen being blocked please help

  For some reason any Windows 7 does not allow programs download from the internet. Programs (Adobe Digital & OverDrive Media are the two main) used to be able to download, but they no longer work. I've placed on the green list to come through the fire wall and I'm not running on a proxy server. I'm at a loss as to why he worked for years and now he's no longer. I tried the two patches that were given for both programs and nothing has worked. For Overdrive Media I get the answer that it is not connected to the internet and to digital Adobe, I get a different error that I looked and it said that the program could not through the firewall, changed cela setting and still have the same error. I also used to get the tab accu-weather on the top of the scree, but now he tells me that I am not connected to the internet. But clearly, I am as I am typing this question. Even gadgets that provides windows that can be placed on the main screen, like a clock and weather report that they are unable to connect to the server, that's why I think that it is not the firewall that is causing this problem I tried to disable the firewall and Windows program and I still have the same question. We did not have any changes made to our Web server or provider and the internet seems to work fine as well. I have also just finished a computer virus scan to determine if there is a problem here and nothing came. I tried to unplug the router to reset my IP address and that did not help. Any suggestion would be great.
  Thanks in advance for any help
  See you soon
  Janine
  Oh also note, my utorrent program does not seem to have any get what throughoh transmitter and the main provider of internet if I use Firefox.

  Hello

  A lot of programs in a Windows 7 computer that depends on the connection to the internet are controlled by settings of Internet connection in the computer. We can access these settings by going to Internet Options of Internet Explorer.

  You can check if your Internet Explorer is set to work offline?

  You can check that by following these steps:

  1. open Internet Explorer.

  2. Once Internet Explorer is open, press Alt and F together on your keyboard keys.

  3. make sure that the work offline option is not selected in the drop-down menu that appears.

  If your problem is still there, you can check these settings once:

  1. press the Windows and R keys on your keyboard to open the run box.

  2. in the run box, type inetcpl.cpl and press enter on your keyboard. This should open the Internet Properties dialog box.

  3. click on the connections tab.

  4. then click on LAN settings.

  5. make sure, none of these options in the local network settings are selected. If none of these three options have been selected, please deselect the and click OK.

  Now please check whether or not your gadgets and other programs that had the issue work.

  I hope this information helps you. Please respond with the status of the issue so that we can help you further.

• Open applications automatically to the left of the main office

  Hello world!

  I am looking for a way to automatically open to the left of my main office applications in OSX El Capitan. The ideal scenario would be to automatically open one of them in this configuration at startup.

  It's also nice to make the app go whenever it is open!

  In my view, it is possible to be reached using Apple Script, but I couldn't find the necessary blocks around forums.

  Can someone help with directions to the solution?

  Thanks ():

  AppleScript would complicate things (I think that GUI scripts would be required to switch to a specfic desktop computer), but:

  You can select applications that are configured to open, each time that you log on your computer, follow the link:

  OS X El Capitan: items open automatically when you connect

  Mission Control allows you to add several desktops, if you need it, follow the link:

  Use the control mission on your Mac - Apple Support

  And, you can assign an application to a specific office, please follow the link:

  OS X El Capitan: working in multiple spaces

• Traffic redirect Internet from the remote site on the main site using the tunel of vpn ipsec

  Hi all

  I have a problem to redirect internet traffic from my remote to the main site by the IPSEC VPN tunnel. The remote site is a Cisco 2801 router with ios (c2800nm-advipservicesk9 - mz.124 - 22.T) and the remote site has ios (C870-ADVSECURITYK9-M, Version 12.4 (15) T12, fc3 SOFTWARE VERSION). This redirect does not work and the last jump with extended traceroute form the remote site is the ip wan of the main site.

  Is there someone who can help me with the right settings this redirection via VPN?

  the remote site config file:

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Tableau Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  crypto ISAKMP policy 8

  BA 3des

  md5 hash

  preshared authentication

  ISAKMP crypto key dgsn2010 address 41.223.X.X

  !

  !

  Crypto ipsec transform-set esp-3des vpn

  !

  vpndgsn 10 ipsec-isakmp crypto map

  Description at HQ

  set of peer 41.223.X.X

  Set transform-set vpn

  match address VPNHQ

  !

  interface FastEthernet0

  IP 41.223.X.X 255.255.255.0

  NAT outside IP

  IP virtual-reassembly

  IP tcp adjust-mss 1300

  automatic duplex

  automatic speed

  vpndgsn card crypto

  !

  interface FastEthernet 4

  192.168.11.1 IP address 255.255.255.0

  IP nat inside

  no ip virtual-reassembly

  !

  IP route 0.0.0.0 0.0.0.0 41.223.X.X

  VPNHQ extended IP access list

  ip licensing 192.168.11.0 0.0.0.255 any

  !

  the main site config file:

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Tableau Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  crypto ISAKMP policy 10

  BA 3des

  md5 hash

  preshared authentication

  ISAKMP crypto key dgsn2010 address 41.223.X.X

  !

  !

  Crypto ipsec transform-set esp-3des vpn

  !

  vpncreo 10 ipsec-isakmp crypto map

  Description FOR bastos

  set of peer 41.205.X.X

  Set transform-set vpn

  match address 110

  !

  interface FastEthernet0/0

  Description OF WAN

  IP 41.223.X.X 255.255.255.240

  NAT outside IP

  IP tcp adjust-mss 1492

  vpncreo card crypto

  !

  interface FastEthernet0/1

  Description OF LAN

  IP 192.168.10.1 255.255.255.0

  IP nat inside

  automatic duplex

  automatic speed

  !

  overload of IP nat inside source list NAT interface FastEthernet0/0

  IP route 0.0.0.0 0.0.0.0 41.223.31.241

  access-list 110 permit ip any 192.168.11.0 0.0.0.255

  NAT extended IP access list

  deny ip 192.168.10.0 0.0.0.255 192.168.11.0 0.0.0.255 any

  permit ip 192.168.10.0 0.0.0.255 any

  ip licensing 192.168.11.0 0.0.0.255 any

  !

  You must configure the routing policy based closure for NAT can be invoked on the main site.

  Here is an example configuration for your reference:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a008073b06b.shtml

  Additionally, make sure that you don't do any NATing at your remote end, IE: you must configure the NAT exemption for all traffic from 192.168.11.0/24 to any (Internet).

  Hope that helps.

• Customer remote cannot access the server LAN via VPN

  Hi friends,

  I'm a new palyer in ASA.

  My business is small. We need to the LAN via VPN remote client access server.

  I have an ASA5510 with version 7.0. I have configured remote access VPN and it can establish the tunnel with success. But I can not access the server.

  Client VPN is 5.0.07.0290 version. Encrypted packages have increased but the decrypted packet is 0 in the VPN client statistics, after I connected successfully.

  Next to the ASA, I show crypto ipsec sa, just deciphering the packets increase.

  Who can help me?

  Thank you very much.

  The following configuration:

  ASA Version 7.0(7)
  
      !
  
      hostname VPNhost
  
      names
  
      dns-guard
  
      !
  
      interface Ethernet0/0
  
      nameif outside
  
      security-level 10
  
      ip address 221.122.96.51 255.255.255.240
  
      !
  
      interface Ethernet0/1
  
      nameif inside
  
      security-level 100
  
      ip address 192.168.42.199 255.255.255.0
  
      !
  
      interface Ethernet0/2
  
      shutdown
  
      no nameif
  
      no security-level
  
      no ip address
  
      !
  
      interface Management0/0
  
      shutdown
  
      no nameif
  
      no security-level
  
      no ip address
  
      management-only
  
      !
  
      ftp mode passive
  
      dns domain-lookup inside
  
      access-list PAT_acl extended permit ip 192.168.42.0 255.255.255.0 any
  
      access-list allow_PING extended permit icmp any any inactive
  
      access-list Internet extended permit ip host 221.122.96.51 any inactive
  
      access-list VPN extended permit ip 192.168.42.0 255.255.255.0 192.168.43.0 255.255.255.0
  
      access-list VPN extended permit ip 192.168.43.0 255.255.255.0 192.168.42.0 255.255.255.0
  
      access-list CAPTURE extended permit ip host 192.168.43.10 host 192.168.42.251
  
      access-list CAPTURE extended permit ip host 192.168.42.251 host 192.168.43.10
  
      pager lines 24
  
      mtu outside 1500
  
      mtu inside 1500
  
      ip local pool testpool 192.168.43.10-192.168.43.20
  arp timeout 14400
  
      global (outside) 1 interface
  
      nat (inside) 0 access-list VPN
  
      nat (inside) 1 access-list PAT_acl
  
      route outside 0.0.0.0 0.0.0.0 221.122.96.49 10
  
  
      username testuser password 123
  
      aaa authentication ssh console LOCAL
  
      aaa local authentication attempts max-fail 3
  no sysopt connection permit-ipsec
  
      crypto ipsec transform-set FirstSet esp-des esp-md5-hmac
  
      crypto dynamic-map dyn1 1 set transform-set FirstSet
  
      crypto dynamic-map dyn1 1 set reverse-route
  
      crypto map mymap 1 ipsec-isakmp dynamic dyn1
  
      crypto map mymap interface outside
  
      isakmp enable outside
  
      isakmp policy 1 authentication pre-share
  
      isakmp policy 1 encryption des
  
      isakmp policy 1 hash md5
  
      isakmp policy 1 group 2
  
      isakmp policy 1 lifetime 86400
  
      isakmp nat-traversal  3600
  
      tunnel-group testgroup type ipsec-ra
  
      tunnel-group testgroup general-attributes
  
      address-pool testpool
  
      tunnel-group testgroup ipsec-attributes
  
      pre-shared-key *
  
      telnet timeout 5
  ssh timeout 10
  
      console timeout 0
  : end
  

  Topology as follows:

  

  Hello

  Configure the split for the VPN tunneling.

  1. Create the access list that defines the network behind the ASA.

     ciscoasa(config)#access-list Split_Tunnel_List remark The corporate network behind the ASA. ciscoasa(config)#access-list Split_Tunnel_List standard permit 10.0.1.0 255.255.255.0 

  2. Mode of configuration of group policy for the policy you want to change.

     ciscoasa(config)#group-policy hillvalleyvpn attributes ciscoasa(config-group-policy)#

  3. Specify the policy to split tunnel. In this case, the policy is tunnelspecified.

     ciscoasa(config-group-policy)#split-tunnel-policy tunnelspecified 

  4. Specify the access tunnel split list. In this case, the list is Split_Tunnel_List.

     ciscoasa(config-group-policy)#split-tunnel-network-list value Split_Tunnel_List 

  5. Type this command:

     ciscoasa(config)#tunnel-group hillvalleyvpn general-attributes 

  6. Associate the group with the tunnel group policy

     ciscoasa(config-tunnel-ipsec)# default-group-policy hillvalleyvpn 

  7. Leave the two configuration modes.

     ciscoasa(config-group-policy)#exit ciscoasa(config)#exit ciscoasa#

  8. Save configuration to non-volatile RAM (NVRAM) and press enter when you are prompted to specify the name of the source file.

  Kind regards
  Abhishek Purohit
  CCIE-S-35269

• Difficulty accessing the virtual private network (VPN) to run on VMware Fusion

  I use Mac OS X 10.5.6 with VMware Fusion 2.0.1.  I am running Windows XP Professional 2002 with service pack 3 and the 5.0.01.0600 Cisco VPN client.  I couldn't connect to my home institution, even if the Mac has no problem making this connection on the same server using a client provided Cisco VPN.

  I tried bridged and NAT connections.   For packed I put the XP network settings to DHCP and of course, he is able to get on the internet.  It detects the VPN server, but the client does not let me enter a password.  Only a single character is accepted.  For the NAT settings, I used normal settings for the XP operating system I internal thought Windows communication would be tunnel by the VPN connection on my Mac.  But I can say that it does not work.

  I prefer to use the NAT connection if possible as this seems the right way to do it and should be more simple.  Any thoughts?

  Jan

  I think that there is a good chance of your router only supports 2 connections to the same VPN at the same time, and that's why you can't have the Mac and the VM connected at the same time.  According to your needs I think you only need one or the other connected at a given time.  When the Mac is connected you can access VPN network resources by placing the virtual machine mode NAT network.  When the Mac is not connected, then run the VM in bridged mode and VPN with only the virtual machine.

  I run 2 Windows XP Pro SP3 machines virtual enough daily, each connected to a different VPN.  My Mac is not connected to a virtual private network (and does not need to).  This configuration allows to my Mac to access local network resources and the virtual machines to do everything that is required through the VPN.  I am running customer Cisco 4.6.x on a virtual machine and a client owner on the other.

• We have laptops in the field who use VPN to connect. How can I get these systems to update our DNS when they connect to the VPN?

  Our mobile sales are part of a domain but not connected to our network. Cached credentials are used to connect outside the office. Once they connect and view their desktops, they select the card from Verizon and use it to connect to our network via a VPN connection. These generally to enter an IP address but the router that connects and not from our DHCP server. This usually means that updates to our DNS servers are not always instantaneous (or update at all).

  When they are done for the day, they just closed the lid of the laptop and he starts in mode 'sleep'. The next day, they open the lid and no lgin is necessary, but they do not need to reconnect to the VPN through their cards from Verizon.  How can I configure my DNS to update more frequently or maybe these computers portable bécon a command "ipconfig/registerdns"?

  We have to connect to these systems in the field and it is almost impossible, unless we call the sales person and ask them their IP. We have more than 350 laptops in the field, then this makes it almost impossible to update all the.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows XP on Technet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Why can't I access the internet without using safe mode

  Help cannot access internet without using safe mode

  Hi Dharrington25,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  As you are able to access the Internet using the safe, put your computer in a clean boot state in order to identify the program causing this problem.
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See KB Microsoft article below for more information on how to solve a problem by performing a clean boot in Windows Vista or in Windows 7:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Unable to access the local network with VPN with some ISPS

  Hello

  We have a VPN Remote Access IPSEC with an ASA5505. Install VPN it correctly but can not access the inside or the ASA to my office.

  But at home with another Internet service provider, it works! You can access inside.

  We are trying with other ISP and it works with 2 and does not work with the other 2!

  Office we also have an ASA5505, but we have another VPN other sites that work properly.

  Any ideas?

  Thank you and sorry for my English.

  Add...

  ISAKMP nat-traversal crypto

  That should do the trick! Please rate if this can help.