Range of ports to be specified in a long list of access

Similar Questions

• How would open a range of ports?

  I play a video game on my computer that requires the use of several ports to open at the same time, but can not find all the information on how to do this when you use the Windows Firewall. I can open the ports one at a time, but it would take a week to watch this range. (Not really, but you know what I mean) So, I guess my question is, "How do I open a beach using the Vista firewall"?

  Hello Vercetian,

  Thanks for posting your question on the Microsoft answers Community Forum.

  After researching, I found another question on the same issue:
  It comes from the http://www.dslreports.com/forum/r19700203-Vista-Opening-Multiple-ports-in-Windows-Firewall
  This Cable Guy article reiterates that you can apply a list of ranges of ports, IE. format CSV (values) separated by commas. Again, try to create the list in Notepad, then copy - paste of the list for Windows Firewall.

  Exceptions can be configured for all or multiple ports

  When you configure an exception based on the ports with the current Windows Firewall, you can specify a single TCP or UDP port. With the new Windows Firewall, you can also specify all ports TCP or UDP (for all TCP or all UDP traffic) or a list separated by commas of several ports. To configure the new Windows Firewall for a range of ports, you must specify all the ports in the range. For example, if you want to configure an exception for the range of ports 1090-1095, you must configure the following ports: 1090,1091,1092,1093,1094,1095.

  Hope that answers your question.
  Please reply if this solves your problem or if you need further support.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WRT1900AC - together open the ports of the specified destination IP address range

  Is there a way to WRT1900AC to open a specified range of ports in the range of the specific destination ip address? I can see the options to open a port range to the local IP address on the LAN.

  You use a VoIP devcie or is this T-Mobile phones through the router?

  If you have a VoIP device as a microcell you can just put its IP address in the DMZ.

  You can try to set 0-65535 in triggering Serial Port and see how it works. I use this for Xbox games and reach the status of nat OPEN for games.

• RV220W transfer of a range of ports

  How can we transfer a port range?

  Suppose that I have defined the following service:

  Service: TEST

  Port type: UDP

  From port: 5060

  End port: 5070

  and I want to send to a specific IP address. Then, if I create a new port forwarding rule for this service he asked me to specify a unique port number to be used internally as:

  Action: Always allow the

  Service: TEST

  Source IP: no

  Destination IP: 10.0.0.100

  Internal port:?

  I want to forward all ports 5060 to 5070 5060 to 5070 internal range.

  How can I do?

  I have the same problem with the duty to convey a range of ports to a single ip address. At the moment I can't put the rv220w in the network to test because we are in the middle of the day and I can't take the network down.

  Just a warning:

  * This has not been tested in an active network *.

  I've done the following:

  Go to the firewall.

  Access rules

  Add the new rule:

  Type of connection: incoming (wan (internet) > LAN (local area network))

  Action: Always allow the

  Service: 'TEST '.

  Source IP: no

  Send to the Server Local (DNAT IP): 10.0.0.100

  Press on save and it "appears" to work. Yet once I have not tested myself so just be careful because I don't know if it works correctly now. When I am able to put the router of the network and test this I will follow.

• Range of ports Application Tuxedo

  Hi all

  Is it possible to restrict the tuxedo application to use a specified range of ports while it is & running (except JSL, WSL, GWTDOMAIN)?

  Question - the tux request arrives with random ports assigned to the application connection to the DB servers, who sometimes is of WSL, JSL, NWADDR of another application of Tuxedo who was expected to come later on the same box.

  I am looking for a way to limit the first application of tux to come within the port range specified for servers. So they do not overlap with other Tux (WSL, JSL, NWADDR).

  Thanks in advance.

  
  

  Hello

  You can avoid this problem by ensuring that the ports used by the different Tuxedo system servers (WSL, ISL, GWTDOMAIN, BRIDGE, etc.) out of the range of ephemeral ports for your operating system.  This will ensure the connection of client as in the database that use (ephemeral ports) ports of the source never comes into conflict with one of your server's ports.  In the above example, 12249 and 12251 ports are ephemeral ports, i.e., dynamically allocated ports by the operating system specifically for the initiated client connections source port.

  See this section to determine how to change the range of ephemeral ports for your operating system if you need to do.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• Range of Ports RTP endpoints TC changed after registering with CUCM

  Hello community,

  We have SX80 endpoints running TC7.3.2 and registered at CUCM 11.

  By default the TC ports rank 2326-2487 UDP RTP endpoints. After registering with CUCM, the range of ports have been changed to 16384 to 32766. In my view, WHAT CUCM change the codec settings.

  rtp_ports.PNG

  

  Based on the http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/administering-endpoints-running-tc72-on-ucm1051.pdf guide I couldn't see any setting to do with RTP ports.

  This is a problem for us, because on the firewall rules, we have configured and fixed ports for points endpoints use the default go 2326-2487 UDP. Because these endpoints and video infrastructure (servers of telepresence, TCS, VCS) are on different networks separated by firewalls. At present, when recording and join the conference bridge there are no media because ports have been changed. When I change the default port range, there is no problem with the media. I can record and call to the conference bridge hosted by a TP server successfully. And if I hit the button refresh on the web GUI of the codec, 16384 to 32766 changes the settings.

  Y at - it a setting that I could check on the side of CUCM?

  Thanks in advance.

  «By default the endpoints ports rank 2326-2487 UDP RTP TC.» After registering with CUCM, the range of ports have been changed to 16384 to 32766. "I believe THAT CUCM change the codec settings".

  Yes, it's true. Once your video endpoint is configured and registered on the CUCM, the CUCM will be more than just the default settings of your endpoint. It depends on the SIP profile has been used and applied for your endpoint. You need to check that the configuration of the SIP profile of the CUCM applied for your endpoint. In your case if it's SX80, check the SIP for SX80 profile and change the start and stop media ports. It comes to the RTP port range.

  In your case:

  Port of bootable media: 2326

  Stop Media Port: 2487

  rtp_cucm.PNG

  

  Kind regards

  Acevirgil

• How before range of ports on a guest machine using NAT

  Hello

  I have a small problem (until now I can think it as small)-I use VMplayer ver 5.0.
  Everything works fine and as expected. I set my NAT by using the command "rundll32.exe vmnetui.dll VMNetUI_ShowStandalone.
  where I am allowed to forward a port on the HOST computer on my computer PROMPT on a per basis.

  The problem:

  The host of the initialization of the traffic must communicate to the guest computer (hosted on the VMplayer) using a range of ports (random) 1024:65535 TCP
  Is there a way to do this? or it is a characteristic that can be seen in the next versions.
  He could help me in this situation, if we can highlight where this NAT/port forwarding configuration is stored (location of file or registry)

  IE version of VMworkstation Linux save such information "/etc/vmware/vmnet8/nat/nat.conf" is there any file like this under windows.
  
  Thanks in advance.
  / Osama

  The host of the initialization of the traffic must communicate to the guest computer (hosted on the VMplayer) using a range of ports (random) 1024:65535 TCP

  Use Bridge instead of NAT.

  He could help me in this situation, if we can highlight where this NAT/port forwarding configuration is stored (location of file or registry)

  IE version of VMworkstation Linux save such information ""/etc/vmware/vmnet8/nat/nat.conf "is there a file like this in windows "

  For example, on a host of Windows 7, it is located in the: C:\ProgramData\VMware\vmnetnat.conf

• How to set up a range of ports for RTMP

  I use Flex version 2 on Windows XP. I created a test that opens a connection over RTMP. The server accepts connections on port 2037 and then seems to breed a new connection for each client on a different port.
  After server startup Netstat shows the link below (ns02dt00223 is the name of the network from my laptop):
  
  TCP ns02dt00223:2037 ns02dt00223:0 TO LISTEN
  
  Then from a Publisher on the topic and send a message:------.
  
  TCP ns02dt00223:2037 ns02dt00223:0 TO LISTEN
  TCP ns02dt00223:1696 localhost:2037 ESTABLISHED
  TCP ns02dt00223:2037 localhost:1696 ESTABLISHED
  
  And departure after a listener on the theme:
  
  TCP ns02dt00223:2037 ns02dt00223:0 TO LISTEN
  TCP ns02dt00223:1696 localhost:2037 ESTABLISHED
  TCP ns02dt00223:1720 localhost:2037 ESTABLISHED
  TCP ns02dt00223:2037 localhost:1696 ESTABLISHED
  TCP ns02dt00223:2037 localhost:1720 ESTABLISHED
  
  My question is: is it possible to set up the range of ports used for connections?
  

  I think that this should and is simply how TCP works to assign source ports
  and the destination ports.

  http://en.Wikipedia.org/wiki/TCP_and_UDP_port

• SQL error: ORA-00910: specified length too long for its data type

  Using Oracle 11.2.0.1 on Oracle Linux 5.8 x 64
  
  I try to install Zabbix http://www.zabbix.com and uses the Oracle database as the data store. The script of the diagram provided below does not work.
  

  CREATE TABLE maintenances (
       maintenanceid            number(20)                                NOT NULL,
       name                     nvarchar2(128)  DEFAULT ''                ,
       maintenance_type         number(10)      DEFAULT '0'               NOT NULL,
       description              nvarchar2(2048) DEFAULT ''                ,
       active_since             number(10)      DEFAULT '0'               NOT NULL,
       active_till              number(10)      DEFAULT '0'               NOT NULL,
       PRIMARY KEY (maintenanceid)
  );

  When I run it, I get

  Error at Command Line:5 Column:42
  Error report:
  SQL Error: ORA-00910: specified length too long for its datatype
  00910. 00000 -  "specified length too long for its datatype"
  *Cause:    for datatypes CHAR and RAW, the length specified was > 2000;
             otherwise, the length specified was > 4000.
  *Action:   use a shorter length or switch to a datatype permitting a
             longer length such as a VARCHAR2, LONG CHAR, or LONG RAW

  According to the oracle documentation for nvarchar2 limit is 4000. What am I missing here?

  "4000 bytes is the ultimate maximum." You can say 4000 * characters *, but it will always be limited to 4000 * bytes *. "
  http://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:1224836384599 #201073000346459201\

  "The maximum length of the column is determined by the definition of national character set. The width of the character NVARCHAR2 data specifications match the number of characters. The authorized maximum column size is 4000 bytes. »
  http://docs.Oracle.com/CD/E11882_01/server.112/e26088/sql_elements001.htm#SQLRF50976

  Furthermore, you treat numbers as STRINGS, remove the quotes around your zero.

• range of ports open WRT54G

  How to open the port range for these ports:

  udp88

  udp3074

  tcp3074

  on my wrt54g

  Log on to http://192.168.1.1

  Leave the user name and password - admin (lowercase)

  Click on apps and games tab

  Click on port trigger - assign any name in the box of the application

  Enter port numbers 88 boxes that first line - box to activate.

  In the second row - 3074 in boxes of four - checkbox to activate.

  Save the settings.

• Reduce the range of ports for calls crossed - Freeway

  Hi all

  We currently have MRA deployment but we have a problem with the "Crossing Media port" range set up in the subzone of the crossing. By default, this interval spend 36000 to 59999, but the FW team must reduce this ports open to 36000-36511. Is this supported?

  After change of the range we did call Jabber tests in Internet and the call is established, but we have no audio in both directions, after taking a trace with tcpdump in traffic RTP EXP-C/E see the 480XX range.

  Any idea to reduce this range without impact in the service?

  Thank you!

  If you go to maintenance > tools > using the Port, you are able to watch all the different ports inbound/outbound highway has set up, if you are able to edit and change of range, there will be a display/change option that will take you directly to the page of configuring these ports.  Don't forget if you are editing a port range, either on the Express-C or - E track, don't forget to check if the other should also be changed.

• Satellite R830 - stop port USB3.0 work after a long period of use

  Hello

  It comes to my new laptop. I got it just a week. However, the USB 3.0 port is very weird. It always stop working when I used it for several hours. I try to update the driver, but I seem to always work.

  are there other solutions?

  > It always stop working when I used it for several hours.
  How do you know that? Is an external device connected and used several hours for the transfer of data or something similar?
  And after restarting the computer laptop everything becomes OK?

• No port USB001 virtual in the drop-down list of printer ports

  I started this question in Twitter, but due to character limited in Twitter, I decided to bring the issue to this forum. How can I add a USB port to the list so that I can connect a USB printer. I tried to follow a suggestion by a Microsoft support engineer by selecting the Local port, but it led me to an assistant who would set up my printer as a network printer. my computer on a network, is not autonomous and the printer will not be on a network either. I searched the Internet for the parallel port of PC USB printer port converter but could not find the type that could be a solution. I would be grateful if someone could come up with a suggestion to help me. What point a hopeless case?

  Unfortunately, it's a very difficult situation to deal with.  The best way to install a virtual USB port is to use the printer installation software that comes with (or can be downloaded for) the printer.  What happened when you tried that?

  Sometimes, you can install another printer connected by USB (which will install the virtual USB port) and then move things more.  You - or have you ever had - any printer connected to the computer via USB?

  You sought a parallel to USB converter means that your computer has a physical parallel port but no physical USB port (or at least no functional and available USB port)?

  What is the brand and model of your printer?
  What version of Windows (XP Home, XP Pro, etc.) you have, including the service pack?

  I went through a long thread on this topic about a year ago.  The original poster has succeeded ultimately in the installation of the printer.

  You can take a look for a few suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/how-can-i-manually-add-a-usb-printer-port/38424e6c-87f8-4b93-b197-c0d2f70368b8?msgId=e40296bd-71c9-40be-acdf-dfd7597808fe&page=1

• PORT of Configuration.DEFAULT of ASA AnyConnect remote VPN access.

  Hello!!! Now, I need to configure the AnyConnect VPN remote access. And I have a question.

  The default 443 AnyConnect port, but the port is occupied on SAA. We use this port for another application.

  How to change the port to connect? Is this true? Thank you!!!

  Hi, please add the following configuration:

  1. Enable the WebVPN on the SAA feature:

     ASA(config)#webvpn

  2. Enable WebVPN services for the external interface of the ASA:

     ASA(config-webvpn)#enable outside

  3. Allow the ASA to listen WebVPN traffic on the custom port number:

     ASA(config-webvpn)#port <1-65535>

• Is no longer able to access the drives specified on my system

  I have a hard drive connected to my computer in auxiliary. It consists of four partitions. The volumes for these are Fat32 or NTFS. However, now my computer says the volume one of the partitions is now RAW (what is?). Anyway, I'm unable to access one of the disks. I'm told the the "file or directory is corrupted and unreadable. What can I do to retrieve the data on these discs?

  Hi Alpha_Imperious,

  1. did you of recent changes on the computer?

  2. are you unable to access one of the drives available on the computer including auxiliary hard drive?

  3. do you have security software installed on the computer?

  I suggest that you run the CHKDSK tool on all drives that you are unable to access and to check if it helps.

  CHKDSK (Chkdsk.exe) is a command-line tool that checks volumes for problems. The tool tries to repair any that it finds. For example, Chkdsk can repair problems related to bad sectors, lost clusters, reticulate files and directory errors. To use the Chkdsk command, you must log on as an administrator or as a member of the Administrators group.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  If the previous step fails, see if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222