Ray vs GANYMEDE +.

Similar Questions

• Setting up the VPN for ACS5.5 group

  I'm trying a group in the ACS5.5 which allows users to connect. I created a network called ASA - VPN group and he put in ray and Ganymede. The ACS is linked to AD. I am lost on what to do next as rules of extreme ass or attributes. I do business with ISE before but not of GBA.

  Take a look at the following link as it describes a step-by-step process:

  https://supportforums.Cisco.com/document/139141/remote-access-VPN-authentication-ACS-5x-using-RADIUS-protocol

  Let us know if you still have any questions.

  Thank you for evaluating useful messages!

• Configure the PIX to use GANYMEDE and RAY for VPN

  Using PIX 506th ver 6.3: whenever I have add the command 'authentication of customer mymap map crypto PARTNERAUTH' removes the current client GANYMEDE authentication +. I need to have both, until I have finished testing the radius server. Can I add a designation additional crypto map command in order to accommodate and to use both the current GANYMEDE + (ACS) and the RADIUS?

  Hello

  You need a time out to do the test.

  Kind regards

• RADIUS and Ganymede + running simultaneously?

  I have a Secure ACS 5.3.40 running GANYMEDE + and I need to also run 802.1 x radius to meet DISA requirements, I've been working on it for a week. I am unable to get the characteristics of work, all AD connections are already there for GANYMEDE + and so I'm not sure how config, Ray can someone help with the procedures.

  Hello

  in the configuration of the aaa you must specify the two authentication 802. 1 x that points to the RADIUS and peripheral administration of Ganymede.

  Configuration of the network device ACS apply both radius and Ganymede keys.

  There will be no conflict for the same as the two have different sets of commands.

  Thank you

  Please rate if useful...

• I am unable to connect with GANYMEDE + connection after the addition of aaa authorization network command

  Hello

  I test an aaa authentication switch when it does not communicate to ISE, and I found a strange behaviour. After that I added the aaa accounting and authorization authentication controls and reloaded the switch I was not able to connect to the switch with the GANYMEDE login

  The switch continued in cycles showing the banner give 3 times authentication failure message and then the cycle begins with the failed, banner and sign message

  I removed the aaa authorization network command and I reloaded the switch and I was able to connect successfully.

  could someone help me with this problem.

  Hi Nitesh-

  This command (... aaa authorization network) has nothing to do with the admin authorization on the n basis (in this case, the switch). This command applies to the network connections such as PPP, SLIP, etc.

  In addition, aaa authorization can be performed by Ray and not only GANYMEDE +. RADIUS is not too powerful and you can provide authorization command sets but you can always return roles and different levels of privilege.

  Have you tested the above configuration syntax? I did and it works as expected!

  Thank you for evaluating useful messages!

• Switches: RADIUS or GANYMEDE?

  Hello

  So far I've managed my switches with GANYMEDE +, but now I have deploy 802. 1 X, requiring RADIUS only.

  For all I know, ACS (I use 4.2) allows you to set a device using only GANYMEDE or RADIUS, but not both.

  Am not mistaken? Or there is a way to define an AAA client to communicate with the ACS even using two protocols?

  Assuming I'm right, I then considered the following options:

  -Configure all switches to use radius for any service (authentication, authorization ec etc.) this makes it easier, but I lose the GANYMEDE services + for switches. What a big loss?

  OR

  -Configure L3 switches to use a second closure, just for the RADIUS services. It would always use the GANYMEDE + but would require a new network for the service RADIUS; In addition, switches L2 does not support both IP addresses and would require anyway a migration to the RADIUS.

  A considerable administrative burden, in other words.

  I'm not ready to deploy a second RAY (ACS, Windows, whatever), right now.

  The key point is this: reading autour I see documentation Cisco recommends always using GANYMEDE + for management, but in this case is not possible. In general, whenever the unit has a role of network entry (switch or access point) RAY seems to be the Protocol of choice. Moving to the RADIUS would have some drawback or a change in the communication protocol? (I know the difference between GANYMEDE + and RADIUS: tcp, udp vs, vs whole package of only the password encryption encryption).

  Thanks anticipately

  C

  Hello Carlo,.

  You can keep using GANYMEDE + for device management and RADIUS to 802. 1 x, with no need for an additional IPN focuses on additional servers or IP on each managed device.

  4.2 ACS allows allows you to set two AAA Clients with the same IP address, one for GANYMEDE + and for RADIUS, however, the host name must be unique.

  Then, on the switch, you can define the same ACS server as a server radius and Ganymede-server host, configure the controls of "aaa" to connect to the console and pointing to the GANYMEDE server authorization + and part dot1x pointing to the RADIUS server.

  What you're looking for is feasible and it is normal to use GANYMEDE + for device management and RADIUS for 802. 1 x.

  I hope that answers your questions.

  Kind regards

  Federico

  --

  If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.

• Can anyone recommend a reliable blu ray software for use with a MacBook?

  Hello world

  I've been watching Blu - Ray software for Mac, but I thought I would check here first of all for the recommendations?

  Can anyone suggest a software reliable blu - ray.

  Thank you

  http://www.macblurayplayer.com/features.htm

• Looking for a SuperDrive drive as a device for Blu - ray

  I'm looking for a SuperDrive as device for Blu - Ray player.

  I'm looking for something that is portable and reliable.

  Someone at - it recommendations for me?

  I want to use it with my Macbook Pro and perhaps with an iMac.

  Thank you!

  External Blu ray for Mac

• Internal blu - ray writers no longer works on OS 10.11.6

  I have an old MacPro with two writers of blu - ray inside. Everything worked great until I upgraded to OS X 10.11.6. Both drives can no longer read or write on discs; they turn and after a while to eject it. In writing programs is ejected a fresh white and prompted a blank diskette. In the configuration of operating system profile system both drives appear correctly.

  I tried to go back to 10.11.5 nothing helped, so I re-updated to 10.11.6, but the problem persists. It seems to be somewhere in the OS, but I can't identify it. Any suggestions?

  Where did you purchase blu - ray writers? Me if I'm wrong but I don't think all Mac Pro supports blu - ray writing with the standard Apple hardware. Probably, you should contact the manufacturer of the third-party hardware you have.

• Blu Ray to iMovie

  Hello

  I downloaded a few movies at home of a videotape iMovie then Blu Ray but now I can't send them to edit, is it possible that I can do this?

  Ta

  You still have the movie you used to burn the Blu - ray or the iMovie project?

  What version of iMovie using you?

• I have burn blue ray but audio is not

  I have send to compressor and audio video is here, burn a blue ray dvd and there is no audio data

  Did you include the Dolby Digital parameter in addition to H.264 implementation when you applied in the compressor?

  Russ

• I want to use a Blu Ray player in my Mac Pro

  I installed a Blu Ray player in my Mac Pro. He worked at one time, but now does not work. I removed the drive bays and reinstall the connector. Now the original superdrive is recognized. The Blu Ray player is not.

  Does show up in System Profiler?

  OS X: about system information and System Profiler - Apple Support

  Are you saying that it worked before?

  What happens if you plugged into the connections now used by the SuperDrive?

• How to burn a Blu - ray export Blu - ray to hard drive?

  I have about a two-hour project that is 21 GB as a blu - ray export drive to the hard drive (I chose not to export to my burner blu - ray, thinking that it would be faster and the desire to burn it later if I wanted to). Now, I have the 21 GB exported to a file .img file, but I have no idea how burn it. Compressor does not open the file and no "burn" which does no DVDs anyway. Just to clarify, then export the project on Blu - ray, I chose HDD as my output over my blu - ray burner, who was also an option.  Any help would save me probably 6 hours or re-export and would be greatly appreciated! Thanks, Paul

  If you are using El Capitan: control - click on the image file in the Finder, choose burn.

  For previous versions of OS, open with disk utility and click on the burn button.

• Best way to Blu - ray?

  It took 12 hours to compress my 2 hour movie since the FCPX timeline in file sharing/computer H.264 mp4

  Now, I want to make a DVD Blu - Ray.  It's exciting, because this will be my first Blu - ray disc!

  QUESTION: It would be faster, but all also good quality, to put my mp4 file in the FCPX timeline and make a Blu - ray to drive?

  OR

  Go back to the film project/timeline and make sure a project uncompressed 1920 X 1080 Blu - ray player?

  It's a 2 hour movie.

  Go back to the film project/timeline and make sure a project uncompressed 1920 X 1080 Blu - ray player?

  It would be better.

  Share > Bluray:

  

  BluRay is not a default choice so add Destination to make it a regular option.

  Al

• Bad burn on Blu - Ray; not enough space?

  Hi all

  I bought a blu ray burner =:

  http://www.bhphotovideo.com/c/product/1051647-reg/samsung_se_506cb_rswd_sam_slim _exterior_blue_ray.html

  Create the disk opens its doors to about 66% asks me to insert a disc. The project is only about 3 minutes. long.

  Then, at some point, I get the error message; "Not enough space on the startup disk.

  Once the error was; not enough space on the disk, but it's a Virgin blu - ray disc. (BD - R)

  There is plenty of space on the hard drive of my iMac.

  The burner did not come with software to Mac but I chose the burner in the FCX share window.

  Other: When I right click on a movie on the desktop file I see an option for burning, but where can I say it blu - ray?

  Thank you

  Al

  Is the library of the PCF on your startup disk and where the media is stored?

  If you burn a movie from a file in the Finder, it is a data disk and will not readable on a Blu Ray player.

  Russ