Setting up the VPN for ACS5.5 group

Similar Questions

• where can I get advice on how to set up the iPad for a partially sighted person

  Where can I get advice on how to set up the iPad for a partially sighted person. Are there apps that can help the user, perhaps activated by voice?

  Paul,

  Go to http://help.apple.com/ipad/9/#/iPad9a2465f9and see all the topics under accessibility.

  

• Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no 1080 progressive setting sequence, how can I ensure that I have the best setting of the timeline for my clips

  Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no sequence definition 1080 progressive

  How can I make sure that I have the best setting of the timeline for my clips. I did all the settings of Mount clips but there is no progressive setting for 1080 p. Images originally dslr Nikon that I used mpeg streamclip to convert to prores. Thanks for your help!

  The frame for you size source of material is HDTV 1080i (16:9). That only sets the size of the image, not the domination of the field, it's what makes progressive or interlaced. The reason it's labels with the 'i' is that when FCP7 was abandoned by Apple, they have never updated the software in order to take account of 1080 p contents.

  To make your progressive sequence, set the dominant field to None.

  gerforce wrote:

  Images originally dslr Nikon that I used mpeg streamclip to convert to prores.

  In your screenshot of the properties of the element for your clip to the source, the material is interlaced. At the original camera file interlaced or progressive?

  Also, the fps footage was actually 30 original and 29.97 not standard?  30 images/s is very limited its use.

  MtD

• printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  Hello

  You can find out how to access and change the settings of quality below:

  http://support.HP.com/us-en/document/c01662356

  Kind regards

  Shlomi

• Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  
  IE can you define the rules of affinity DTS depending on how the rules of storage of profiles are configured for a virtual machine?

  In my mind it seems there is disconnect from the DTS and storage profiles.

  Thank you.

  = NOTE =.

  My lab at home, 2 organizes running ESXi 5.0

  Dv01 has

  Of startup vmfs 7200 RPM 160 G = dv01-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  VM02 has

  Of startup vmfs 7200 RPM 160 G = VM02-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  Vmfs 5900 RPM 2 TB = VM02-TV01

  I have (3) facility profiles of storage using 'User-defined storage Capablity' as shown below:

  (160 @ 7200 RPM SATA) boot > Boot

  Fast (160 7200 RPM SATA and 1 TB @ 7200 RPM SATA) > fast

  Slow (2 TB @ 5900 RPM SATA) > slow

  Then, I set up a storage Cluster with my local disks on dv01 (only to date)

  LocalVM disc dv01-BOOT and dv01-VMFS disk of the 'cluster of storage.

  I have a computer virtual called DC01 (HardDisk1) want to live on 'Boot' profile storage drive
  His "Non-compliant" poster according to the storage profile, it should run on drive 'boot' on dv01

  To get to this point, I put the StorageCluster in Mode of Maintenace 'DTS' and forced a sVmotion of all virtual machines off dv01-BOOT

  No disks are IO or claim of space.

  But once I take the 'DTS Maintenacne mode' STARTUP dv01 floppy is now get the DTS to return him to satisfy the storage profile (rule) I install... IE do the 'storage profile' VM complient (without doing a few externall API, the PS script or the 3rd party software calls)... ??

  Seems weird it is (or may be) such disconnection of a memory of the profiles and the StorageClusters and the DTS?

  Thank you...

  At this point, I think that storage DRS and storage profiles are two technologies to separate and work independently, but what you suggest is a great idea-

• Need help to set up the VPN connection using my mobile

  Title: VPN

  I am running Windows Vista 32 with a NetGear WNR1000 router and need some giudance to set up a VPN with my phone Samsung Galaxy G3. Can someone help Sir with these steps?

  Hello

  Thannk you for the reply with the status of the issue.

  I suggest you go ahead and post the same question in the Microsoft Technet forum for assistance.

  http://social.technet.Microsoft.com/forums/en/itprovistanetworking/threads
   

• IP address connection sets using the VPN Client

  Hello world. I'm using a VPN Client when I establish a VPN Tunnel with a 1600 router, and I have a question.

  Can I assign a fixed IP address in the client, instead the router send to random addresses from customer?

  What I would he do this?

  It would be in the configuration of the VPN client, or in the configuration of the router?

  If so, I'm doing this?

  Do I need another tool, or other software or hardware to do?

  any help is hope...

  Thank you...

  Hello

  I don't think that there is a simple way to do this.

  However, if you create a different groupname for the user who needs a static IP address, I think you should be good to go

  So what you need to do, create a new pool of addresses. Make the start and end ip address be the same (this is the address to which you want to assign to the VPN user)

  Configure another ipsec on the router group and bind the new pool to this group

  Ask your VPN client to connect to this group

  Hope that helps

  Jean Marc

• SQL query to search for the line that contains the identifier for each consecutive group

  Hello

  I'm on 11.2.0.3 Enterprise Edition.

  I have a strange request here - do not know if this is possible without going to procedure...

  Given these data of the sample:

  create table test_status (
    status varchar2(10),
    revision_id number,
    revision_timestamp timestamp);
  
  insert into test_status values ('PROPOSED', 1, systimestamp);
  insert into test_status values ('PROPOSED', 2, systimestamp);
  insert into test_status values ('PROPOSED', 3, systimestamp);
  insert into test_status values ('ACTIVE', 4, systimestamp);
  insert into test_status values ('ACTIVE', 5, systimestamp);
  insert into test_status values ('PROPOSED', 6, systimestamp);
  insert into test_status values ('PROPOSED', 7, systimestamp);
  insert into test_status values ('ACTIVE', 8, systimestamp);
  insert into test_status values ('ACTIVE', 9, systimestamp);
  insert into test_status values ('FINISHED', 10, systimestamp);
  insert into test_status values ('FINISHED', 11, systimestamp);
  insert into test_status values ('FINISHED', 12, systimestamp);
  

  Gives me:

  SQL> select *
    2  from test_status
    3  order by revision_id;
  
  
  STATUS     REVISION_ID REVISION_TIMESTAMP
  ---------- ----------- -----------------------------
  PROPOSED             1 25-SEP-14 04.49.47.954000 PM
  PROPOSED             2 25-SEP-14 04.49.47.962000 PM
  PROPOSED             3 25-SEP-14 04.49.47.966000 PM
  ACTIVE               4 25-SEP-14 04.49.47.969000 PM
  ACTIVE               5 25-SEP-14 04.49.47.972000 PM
  PROPOSED             6 25-SEP-14 04.49.47.976000 PM
  PROPOSED             7 25-SEP-14 04.49.47.979000 PM
  ACTIVE               8 25-SEP-14 04.49.47.982000 PM
  ACTIVE               9 25-SEP-14 04.49.47.987000 PM
  FINISHED            10 25-SEP-14 04.49.47.991000 PM
  FINISHED            11 25-SEP-14 04.49.47.996000 PM
  FINISHED            12 25-SEP-14 04.49.48.000000 PM
  
  
  12 rows selected.
  ws selected.
  

  I want to get this result:

  STATUS     REVISION_ID REVISION_TIMESTAMP
  ---------- ----------- ----------------------------
  PROPOSED             3 25-SEP-14 04.49.47.966000 PM
  ACTIVE               5 25-SEP-14 04.49.47.972000 PM
  PROPOSED             7 25-SEP-14 04.49.47.979000 PM
  ACTIVE               9 25-SEP-14 04.49.47.987000 PM
  FINISHED            12 25-SEP-14 04.49.48.000000 PM
  

  Then query the table ordered by Revision_Id, I would get the line containing the highest revision for each consecutive group of status values.  I am able to get the line containing the highest revision for each separate status, value, but I can't deal with the scenario where a state value reappears later.  In the case of the real world, it is a workflow and I need to take into account the fact that an element through the workflow may be redirected to the back front she proceeds forward again.

  Hope it makes sense.

  Thank you

  John

  Hi, John,.

  John OToole (Dublin) wrote:

  Hello

  I'm on 11.2.0.3 Enterprise Edition.

  I have a strange request here - do not know if this is possible without going to procedure...

  ...

  Do not no stinkin' procedure:

  WITH got_grp_id AS

  (

  SELECT the status, revision_id, revision_timestamp

  ROW_NUMBER () OVER (ORDER BY revision_id)

  -ROW_NUMBER () (PARTITION STATUS

  ORDER BY revision_id

  ) AS grp_id

  OF test_status

  )

  SELECT status

  MAX (revision_id) AS revision_id

  MAX (revision_timestamp) DUNGEON (DENSE_RANK LAST ORDER BY revision_id)

  AS revision_timestamp

  OF got_grp_id

  GROUP BY status, grp_id

  ORDER BY revision_id

  ;

  For an explanation of the technique of Difference sets used here, see

  Analytic Question lag and lead and/or

  Re: Ranking of queries

• How to set up the password for the supervisor on Tecra A4

  Hello

  I want to activate a password for bios we give access my tecra A4. (supervisor password)

  But when I activate a password, it is for the start-up of the pc.

  I want to warn the user base to reach the bios without activating a password at the start of the pc.

  How can I do?

  Thank you

  Hello

  If you want to set the password for the supervisor so you should do it in the utility supervisor password.
  On my laptop, I found this utility in the assistance of Toshiba-> sure.
  I presume that it s also on your A4.

  There, you can start the supervisor password tool. Here, you have to choose the option saved.

  Please post if this works

• How to configure the VPN for Xperia phones

  I know that this does not work for many after the upgrade to KitKat but I just wanted to know how other users were using previously.

  Could you give me the settings or help me how to use these settings.

  VPN does not of course for a lot, but I guess that Sony will do something so he can fix it. But tell me how you used earlier. I am interested in knowing. Never used because I found it difficult. People told me that it is a sort of proxy to surf the net anonymously.

  Sachin4u wrote:

  ... VPN works of course not for many...

  Where did you get this info? I had this problem a few weeks in this forum channel and no useful response has been posted.

  But anyway: on Android 4.3, I added a VPN connection with the 'IPSec Xauth PSK' type and the pre-shared key. At the opening of the connection, I entered username and password. A few secconds later than the VPN connection to my home network with router Fritz Box has been implemented.

  Hopefully, I could help you, Titus

• Where can I get the age of empires II set up the file for Windows 8

  I don't know where I will get a full version of age of empires II the age of Kings for windows 8. I tried Google, but I just. Please give me a link where I can get the full version of the game for windows 8.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are unable to get age of Empire II set up the file.

  You can try to install it from Microsoft Store.

  https://support.Microsoft.com/en-us/pH/560/NL?WA=wsignin1.0

  You can contact the support of Age of Empires for better assistance.

  http://support.Microsoft.com/ph/7745

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Hide the headings for specific users/groups

  Hello
  
  Is this possible with WEBhelp, hide/Exclude subjects for specific user groups / users?
  
  Currently, we use html/chm help. There is a project for our main software. I have another project for an add-on that is integrated in the table of contents of the main project using the merged help function. We only install help for this module when the customer has purchased this module. So the customers who do not have this module do not have help to make it.
  
  It is possible something similar with WEBhelp (Pro)? I ask because we go to WEBhelp (Pro). In this case, there is no help by the customer file, but one for all the world. Is there a way to display only the additional items to customers who use this module?
  
  * The only way I can think is to integrate all this into a single project and publish twice (one with and one without the themes of the additional module) using the tags of the construction. Or is there a way to let the RoboEngine/RoboServer merger it on the fly, but based on the criterion that the customer has the module?
  * This additional help project can be added to the main help as a teaser for other customers also use this module (others cannot buy unless you are a franchisor of a group of specific hotel for which we have developed the module)
  
  Thank you

  Hi John-Pierre. RoboServer this is impossible on the fly. Tags of the generation are the way to go. Simply create a new tag, apply it on the subjects you want no franchises user to see, then apply the tag to your SSL to exclude it from the output. Viola, you have your username not franchisees to help. Simply remove this label from construction of the SSL for users of franchises so that they get everything. You can also create two identical WehHelp Pro SSL - 1 vote against and no label construction and the other with a construction tag to avoid you to have to remember to add/remove.

  How your application will know files that help write? Is this a separate executable? I know that it is possible for the INSTALLATION. EXE to check the license before installing the modules, but I never went to the bottom of this line.

  BTW, build tags can be used on all types of output.

• Set up a dial for Laserjet M1212nf group fax?

  I installed my all-in-one to a deskjet 4500 to the Laserjet M1212nf.

  On my old printer/fax, I could set up a speed dial to send the same fax to several fax numbers in the phone book with speed control knob just a dial.

  For the life of me I can't figure out how to set up a speed dial to a fax from the Group on this machine! It makes me NUTS. Is there a separator, you can use to enter multiple numbers or?

  I would be really disappointed if a feature I had on my cheap HP $69 ink jet is not available on this printer laserjet much nicer and more expensive.

  Here is a link that will guide you in this direction.
  http://goo.GL/7Cu4U

  At the bottom of the page, it shows the fax configuration and leads to installation speed dial.

• Only read access to the ACS for a specific group

  All the

  I use an ACS with version (5.5.0.46.8). There is a group within the company requesting access RO to GBA.

  This group is already created in the user and groups of banks of identities/EXTERNAL/AD/directory

  In all of the elements/device/order Admin policy, I already have a set of SHOW command created

  I have looked in policies/Acess Network Services access authorization / Default / access but am a little lost after that.

  Please inform promptly.

  Looks like 'show' and 'sh' problem in the command set.

  If you pass for full access with it. It work?

  Remove 'sh' him then use some commands specific complete show.

  Let me know the results!

• concatenate the hexadecimal code set by the user for communication series

  Hello.. I'm a newbie to LAbView. I am trying to contact a power supply Source. for which my order will be in the format of 4 to 5 bytes; for example, to set a voltage of 220 VAC, it's 1509 0898 in hexadecimal, 15 of which is binding for all orders of shaky writing, 09 for various operations such as setting Volatge or FREQ. and last four digits 0898 is a 2200 (by 220.0VAC) hex code.

  By sending the complete command 1509 0898 in hexadecimal Serail port communicating my source, even in the giving them using string concatenation as 1509 is the first chain and 0898 in second, it works fine.

  But these last two bytes would be defined by the user and can therefore vary in digital, so I put a number of Hex code conversion there before concatenation. who does not send the code Hex 0898 as reqd.  but this garbage to send value... 3038 3938

  Help, please... Thanks in advance...

  Ermani salvation,

  Here is a step by step journey: