Re: Black screen on Satellite P300 after removing the SD card

Similar Questions

• Satellite L650D - after removing the error wireless security Norton occurs

  I deleted Norton security center today that it had expired, and now I get this error when connecting to a wireless network. It is said that he has limited the network connection, when I run it it says cannot resolve the error and advanced details of diagnosis gives me this message.

  "Windows could not automatically bind the ip on the network card protocol stack.

  I tried to update the driver and the system restore.
  Any suggestion would be appreciated

  Data sheet:
  Satellite L650D
  Broadcom 802.11n wireless network adapter
  Windows 7 Home premium 32-bit

  Hello
  There are different reasons for this.
  Someone wrote that the ZoneAlarm firewall could block the wireless network adapter.
  In this case, I would recommend removing the system Zonealarm.

  Another said that he could solve this problem by unplugging or resetting the router.

  Also try to disable the wireless card in Device Manager.
  Then restart the laptop and activate the card LAN once more.

  Good luck

• I can go back to Intel HD graphics after removing the graphic card Nvidea GT 620?

  Hello

  Lets say, I have installed the GT620 Nvidea graphics card for my PC, PC graphic is now set by default for this card. If I don't like it and I take my PC card, PC automaticaaly will increase from the original Intel HD graphics? What I have to do a reset or re install drivers Intel?

  Thank you

  Low

  Hello

  You unplug the external graphics card from the computer, the default computer starts using the integrated graphics card. There is no need to install the video drivers. However if you encounter a problem, you can reset BIOS to factory default so that you can update the video drivers from the Web site.

  www.support.Dell.com

  In case you need assistance please do not hesitate to respond with the number of system model and operating system.

  I'm happy to be your assistance.

  Thank you & best regards
  Kaushal P
  #iworkfordell

• Screen locked on Satellite 1900 after using the FN + F2 keys

  Hello

  I got my Satellite 1900 locked with a black screen. It happed after pressing accidentally FN + F2. I don't think that the laptop has a locking password (I think that his game on the BIOS), but I can't return the control by pressing any key.
  I also tried FN + F5 (just in case it's a matter of external monitor) but you don t work either. Maybe he has a default password on the BIOS?
  Could you tell me what is the default password or how to recover from this situation?

  Thank you very much.

  Hello
  If you have not set a password, just press FN + F2, and then type
  If a password: FN + F2, entry, password, enter

• Black screen with blinking cursor after the passage in MSC mode

  I followed the recommendation to disable startup secure in the Bios then move the UEFI Bios to the CSM. But when I go to set up what I see is a black screen with a stable cursor in it. And it doesn t go in the Bios.

  The black screen remains.
  I turn off the laptop and once again now, but I still have a black screen with a cursor that is stable and that s it.

  It's like that and it doesn t go to windows even go into the Bios, I can t.
  What should I do?

  Help, please...

  Hello

  After the passage of the CSM and disabling secure boot UEFI mode, you will not be able to boot from the HARD disk as the installation of Windows 8 requires secure boot and the mode of the UEFI.

  Now you can boot from the disc or other media bootable (USB flash key) to install the Windows 7 system.

  I guess you've made these changes installed Windows 7. Right?

  By the way: what model of laptop you have exactly?

• Satellite A55-S1065 - after removing the battery, BIOS ask me password

  So, something happened yesterday, and it seems to me that it is very strange.
  I have a portable Satellite A55-S1065. And while I was with power point, the
  computer crashes. In the midst of my confusion, I decided to delete
  the battery just to make him stop.

  So I did it and plugged it again
  and I tried to turn on the computer. Now, the bios ask me a password,
  but I've no idea what password it is that. Can someone help me solve this problem?
  IM really desperate to find a solution to this since this computer contain
  many of my works.

  Thank you very much.

  > After removing the battery, BIOS ask me password
  I know it may seem silly now, but I never heard of something like that. I use laptop for a long time and I had the experience with many others and strange question, but something like that, never.

  Problem is that we are dealing here in the public forum and BIOS password is a very sensitive area and very important security feature, so we can not write here about some illegal ways how you can remove the BIOS password.

  If there is no way to start your laptop, I recommend you contact the nearest Toshiba service provider and ask for help.
  I'm sorry. :(

• Computer won't turn on completely (black screen with blinking cursor) after installing windows updates

  8/7, the following updates have been installed correctly:

  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  Update definition for Windows Defender - KB915597 (definition 1.63.1021.0)

  Following this installation, the display resolution has been reset to be very low.  When you try to reset the resolution, I was alerted to a driver problem, so tried installing this in vain (below error code)

  Intel Corporation - display - Intel (r) G33/G31 Express Chipset Family

  Error details: Code 800703E3

  After that, he went to sleep the computer, but was unable to select 'sleep' (it is grayed out) but the stop keys option indicates that the updates were ready to install so I stop thinking which may help.  It was last night.  This morning, the computer was on, seen the screen DELL, then a black screen with flashing white cursor in the upper left corner.  I tried ctrl-alt-del, got the dell screen appears again, then black screen.  I tried ctrl-alt-del, thinking I could try one of the options key F at this time, but he won't even go to this point, the dell blank screen just screen.

  Any ideas would be very appreciated!  It is the second major problem that I had recently after updates vista install (the last time I temporarily lost access to all my files, because they were placed under a temporary user account that had been created!)

  Thank you!

  Hello

  You try to borrow the Vista DVD to any of your friends and do a repair (inplace upgrade) it might help you solve the problem.

  All the best,

  Geek

• Funds/wallpapers don't fit down to the size of my screen after removing the Dreamscene for Windows 7 64.

  My screen/origins don't fit down to the size of my screen after removing the Dreamscene for Windows 7 64.  I ran a 32-bit uninstall reg. by mistake and now larger images appear only partially filling to the top of the visible area of the screen.  I have a laptop of Toshiba A505 displaying 1366 x 768 with Windows 7 64. Does anyone know the registry tweaks on how to solve this problem? Thank you very much.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite - black screen and can't restart with the recovery disk

  I have a black screen and can not restart with the restore disc but it seems to be.

  I find this odd, I can't ask Toshiba direct on my problem, but I have to wait for one nature in the heart of my problem or give me a helping hand

  Hey,.

  This means that you can see anything on the screen of the laptop or only if you try to start with the recovery disk?
  You can start Windows or access the BIOS?
  You must post a few more details, otherwise we can t help you :(

  Furthermore, Toshiba is not your first contact, you should ask an authorized service provider. They can help you too! :)

• Computer stops after removing the hardware device.

  Original title: closure of the problem

  Once I am done using bluetooth and easy then disable the bluetooth in my laptop sony vaio, my laptop keeps. It is stuck on the "shutting down" screen and stays just like that. In this case only everytym I use the bluetooth.s

  Hello

  Thanks for asking! If I understand correctly, you have a problem with the computer to close after removing the Bluetooth device.

  Before I continue, I would like to collect some personal information.

  1. Were there of the last changes made to the system before the show?
  2. You get the error message?
  3. The question is limited to specific device?

  Method 1:

  Follow the link to perform a clean boot check, if it helps.

  How to perform a clean boot for a problem in Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Method 2:

  Follow this update of the driver update Bluetooth drivers. Check if it helps.

  Answer with the results, I would be happy to help you further.

• my iphone 5 c screen stops working when I remove the case

  my iphone 5 c screen stops working when I remove the case

  Delete this case? Please explain what you ask a little more clear.

• persistent app of the fragments-i-drive placed a persistent frag of cookie or app on my computer and after removing the disc it always opens whenever I start. Anyone know how to uninstall or delete it?

  fragments of persistent app-

  i drive placed a persistent frag of cookie or app on my computer and after removing the idrive with CleanMyMac3, it's always the opening whenever I start. Anyone know how to uninstall or delete it?

  Rid you MBP od CleanMyMac3.  It is not necessary and can damage your system.

  Try Malewarebytes Anti-Malware for Mac:

  https://www.Malwarebytes.org/Mac-download/

  Ciao.

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.

• missing hal.dll message after removing the hard drive

  Original title:Ok, I had the same problem on my hard drive missing hal.dll. My question is what windows xp writes the cmos on my computer?

  OK, I had the same problem on my hard drive missing hal.dll. My question is what windows xp writes the cmos on my computer? The reason why I ask, is that I physically removed the hard drive from the computer and then start the computer I get the same message hal.dll lack. Since the hard drive is not installed, the only place where this message comes's cmos or bios of the computer.
  I know it seems odd, but I couldn't believe it when I saw it after removing the hard drive. It used to be with older computers and Windows 95 or 98 when you took a hard drive that wasn't working and installed with one that works from a different computer, you could swap out and boot the computer and make a few changes to some drivers if you.

  So what is windows xp write to the memory cmos on my computer?

  > Ok, I had the same problem on my hard drive missing hal.dll.

  The same as what? If you reference another thread, please include a link to it.

  > My question is what windows xp writes the cmos on my computer?

  It is not write anything for her at all.

  > Lack of the reason why I ask this is that I physically removed the hard drive from the computer and then start the computer I get the same message hal.dll.

  I think that you're wrong. I would like to say two things happening:

  1. you have more than one hard drive and the problematic drive was not removed, or

  2. you deleted something other than a hard drive.

  Do you have a CD in your CD drive by chance?

  What is the brand and model of your PC? Are you able to get into the BIOS?

• kb310441 microsoft fixed it does not remove the old username of the process after removing the name of the pc.

  Microsoft fixed that it does not remove the name process after removing the name of the pc. How to make an old username of the process?

  Fix, he changed the name and organization... just not their process attached like taskmanager, explorer.exe, iexplore.exe, wuauclt.exe, and much more.

  Thank you

  Charlie

  Hi charlezim,

  Target article does not username, but the information stored on the computer.

  If you want to change user names, you must create a new user account.

  How to create and configure user accounts in Windows XP