Re: Blank screen on laptop Satellite Pro

Advice please - my son released a disc of a game that he played and the screen went white. She always had the slider, however. I rebooted it and although the screen shows the normal screen displays, it is emptied once it's over. Any ideas would be appreciated.

The next step otherwise would be to use the back-up that I created when I got the top of the Tower of the disc.

Concerning
Steve

Hi Steve

It is not easy to understand exactly what is happening.
What happen exactly when you press the power button / stop? Something is shown on the screen? See Toshiba welcome screen?

Are there usual HARD disk activity? Windows load properly (can hear you all the sounds)?

Tags: Toshiba

Similar Questions

  • Screen bezel for Satellite Pro C850 - 1 M 7 needed

    Hello
    Someone at - it helps me find a bezel replacement screen for a Satellite Pro C850 - 1 M 7 please?

    eBay gives just generic and I can't find anything on this site or the other.
    Thank you very much
    :)

    Laptop parts are not available for sale. No laptop manufacturers etc. Toshiba page you will not find anything.
    Or, you can try to order by a Toshiba service provider or some independent stores. Usually the Googling around you should be able to find it for Satellite Pro or maybe some Satellite C850. The parts must be the same.

    I don't know where you want to live, and it is not easy to help looking for a direct link to order.

  • Unable to start my laptop Satellite Pro - orange flashing

    I can't boot my laptop Satellite Pro.
    I have an orange light flashes. I tried to remove the battery and hold the power button, but it did not work...

    Help

    I agree with Liam.
    The indicator flashes as a serious hardware problem was detected.
    What you could do is remove the RAM modules and test the device with the new test modules but I guess that is not RAM problem but something wrong with the motherboard.

  • Screen broken on Satellite Pro 4600

    Several years ago, we broke the monitor on our laptop Satellite Pro 4600 computer series. Yesterday, that I took it out to connect to TV and see what data (especially photos), we had on what I was able to backup to an external drive. However, it doesn't start. I only see one tiny bit of the message displayed: "* bad ' and on the next line"check knew. "

    I tried to boot with the disk support, but it does not work. By pressing Fn + F5 does not control the settings of the monitor with her in this State, I can't see the full mesdage. I'd rather not use the recovery and the Configuration Builder CD because I want to see my files...

    Any ideas?

    Thank you very much.

    Hi King_2,

    the quick and easy way:
    -go and get a usb-to-ide-usb adapter
    -Take out the hard drive and
    -connect with the adapter usb to another machine
    now, you have access to all your files!

    the long way:
    -Connect a monitor to the machine
    -Make sure that the external monitor is your primary display
    -check the bios and set date/time
    -pray
    -try to boot your operating system
    -course data on external hard drive

    This adapter is about 15 euros, and you can use it more than once!

  • Need driver graphics card for my laptop Satellite Pro 4310 W2K

    Hello

    I'm looking for a graphics card driver for my laptop Satellite Pro 4310.
    I need a driver for Windows 2000.

    In the Toshiba download area that I can't find a driver for the 4300 series? There are only the names of laptops as A / S / P / series U and so on. 4300!!!
    I know that the laptop has the S3 Savage/IX card inside.

    Is someone can help me?

    THX...

    Best regards
    Thomas

    Have you checked also option ARCHIVE in type of product?

  • Satellite Pro 400 cdrom drive fits a laptop Satellite Pro 4300

    Can someone tell me if a cdrom from a Satellite Pro 400 drive fit in a laptop Satellite Pro 4300. I have no serial numbers or cdrom, sorry

    Hi Tony

    The first is about 11 years old and the second about six years. I really put t think you can use it. In my opinion, you must use the same drive.

  • Webcam black when you use MSN on laptop Satellite Pro

    Guys... My cam built into my laptop Satellite Pro seems to work fine when I open... But when I use it with MSN Messenger its always dark... I want to say if I put it on the mood of night that would work with the cam software, but not with MSN.

    What should I do!

    Help please

    If you use MSN the webcam software shouldn't t be started and should not work!
    Disable the webcam software in msconfig. The webcam software should not start automatically when you start the laptop.
    Also, the MSN shouldn't t load. Also disable in msconfig.

  • White screen after the Satellite Pro P200 display driver update

    I installed the latest display driver ATI Mobility Radeon HD2600 (8.432, on the site of Toshiba through Tempo) on my Satellite Pro P200 yesterday. Reboot, everything seems good as much as the screen "Please wait...". "Windows Vista professional, but instead of showing the page of connection I get an empty screen (with a mouse cursor that moves around as usual). All I can do at this point is to be able to, and I'm running out of ideas on how to move forward.

    Things I've tried:
    # start in safe mode, the video resolution or last known good configuration, result the same screen empty.
    # connect to the system using remote desktop (to disable the driver) is not possible because the system has not yet loaded the network drivers.
    # I can't go back to a restore point because Vista can't find (I did a manual after you install updates windows over a couple of days).
    I can run a system command line options of recovery and prefer to use it to disable the driver + if + I knew how before the use of the more radical options.

    A search on the web (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
    previous versions of the driver, but none of the links I've looked at to give a solution which does not exist for me.

    I agree with Hairyfool, you who should solve problems using an external display. If no image appears, then something with the material might be.

    Please give some information about your situation...

    See you soon

  • Matte screen disappeared on Satellite Pro A200

    I have a Satellite Pro A200 which works fine on an external monitor, but is very dull on the laptop monitor.
    Anyone knows if it's backlit and if the lights are replaceable, or do I need a new screen?

    FN + F5/F6 does nothing. Correct brightness with the software works on the external monitor, but not on the laptop.

    Thank you

    RickC

    > Is - anyone knows if it's backlit and if the lights are replaceable, or do I need a new screen?

    It could be a FL. inverter problem In the worst cases the problem internal display, but at this point, I suppose that it s inverter malfunction only an FL.

    Recommend trying to replace the FL inverter first, since this part is much less expensive than a screen.

  • Black screen after hibernation - Satellite Pro A120 mode

    I have the following on my A120 problem:

    My Satellite Pro A 120 with professional vista crashes after I close the lid.
    The current settings in the power management standby is extended when the lid is closed, but I also tried with the sleep settings.

    After I opened my top once again, black screen appears and restart windows.
    Vista offers a solution online after the accident, but nothing appears as a result of the audit.

    Someone had this problem?
    I would appreciate any kind of advice.

    Hello

    I see you are using Vista on this laptop.
    This laptop has been pre-installed with Windows XP. Am I wrong?

    It would be very interesting to know if the same thing happens with the OS pre-installed Toshiba. Please check this!

    That say these issues can be caused by wrong or not entirely compatible graphics driver or lack of MS patches/fixes.

    I recommend checking out the various graphics and update the operating system drivers to the last State

    Best regards

  • Died on my laptop Satellite Pro

    I have a portable Satellite Pro, the battery ran down and the closed laptop. I plugged in the charger but nothing happens, not even a light then I tried another charger but that didn t work, so I tried another fully charged battery and that didn't work.

    Any help please

    Hello

    Remove the battery and plug adapter only. Is HEADED for AC adapter WE?
    What happens when you press the button walk / stop? Any reaction?

  • DVD SuperMulti drive on laptop Satellite Pro

    I am looking to buy a Toshiba Satellite Pro PSCMMA001001 Notebook 15.6 ".
    Is the optical drive: SuperMulti DVD drive provided appropriate to save backups of large databases (genealogical)? IE is it fully recordable for data, photographs, etc. ?
    Thank you.

    Hello

    Using the detached part number, I found specification for Satellite Pro C50. It has DVD SuperMulti player.
    Of course you can use it to record all your important data to blank media such as CD-R/RW or DVD-R/RW.

    I put t know what burning software is installed originally. Check it out and test functionality.
    Of course, you can delete the system and install your favorite burning application.

  • Low screen on my Satellite Pro A60-191 image quality

    Hello

    Today, when I came to this site I noticed it is of poor quality lines down on the grey area of this site (under the TOSHIBA logo) I can't show you because the camera does not have a picture of the lines. also when I go on to a new folder before the lines dissapaer site! and as it happens on some other programs aswell! sort of, it's just low quality lines towards the bottom of the screen!

    Thank you!
    Suddste
    TOSHIBA Satellite Pro A60-191

    Hello

    Sorry, but your explanation is quite puzzling to me. Is the value display resolution recommend an or even more?

  • Gray pixels below the back of the screen onto the Satellite Pro U series

    Hello.

    After a month since the laptop purchase date, I had a problem with my screen (a black point aprox. 1 mm size - not dead pixels but something like a bug between plans display, perhaps between the trubright and the lcd screen, whatever it is these plans I don't know not-on the side rear of the screen, on the lower part), solved by Toshiba customer service using the replacement of the screen.

    But, after one more month for the replacement, the problem was once again with some minor differences.

    My screen looks like now, on the lower part of the screen (about 1-3 cm of the bottom line) a few other gray (this time) points, each with approximately 5-15 pixels of size.

    I counted to date a total of four quite visible like these bugs and a few others having no importance because of very small size, on the different areas of the screen.

    I am concerned because it seems these gray he appeared on time, more points. What mean these bugs and what solution is there?

    I want to know your guys, if anyone has a similar problem, what the problem actually is and how you can permanently solve.
    (I can not simple running again for the service because I guess I'll do every month)

    Thank you
    Iulian

    PS: Please do not ask me how to clean it's screen. It is not my bugs he and the monitor (first surface I mean) have some some dirts. I'm very cautious in this regard.

    Hello

    We could speculate about this problem, what might be wrong; Map chart or screen itself?  :| ?
    I think it s a default display

    > I want to know your guys, if anyone has a similar problem, that the root of the problem is and how you can fix it permanently.
    Personally, I've never noticed these display problems on my laptop satellite.
    I think it is foolish to discuss on the reasons why this happens it looks like simply a hardware problem. You ask how do I solve this problem?
    In my opinion there is only on the solution; replacement screen.

    Contact the ASP guy and ask for later handling.

    Concerning

  • Need cable to screen for my Satellite Pro C660 2JD

    I tried to find a Satellite Pro C660-2JD display cable for several months now with absolutely no luck at all... I even tried to display the C660 series cables and none of them seem to match, there seems to be it's own cable.

    Anyone know where I can find the display for this model of laptop cable? Any help will be greatly appreciated.

    Thank you

    It is quite difficult to find these parts. When I need something I look for on eBay. With a bit of luck, you will find many parts for models of different laptops.

    Have you tried to contact the nearest Toshiba service provider and ask if they can get this cable for you?

Maybe you are looking for

  • Get the container element

    I created a container that contains numbers and strings of elements. I would like to pass the one element to a vi. But I don't know how to extract the element respectively. Is there a way to get the items in the container one by one? Something like:

  • Sharing of Boolean values across while loops

    I'm new to Labview and I try to use an angular encoder as a type of switch. I want to take measures continuously from the angle of the encoder and turn on an analog output signal, each time comes in a certain angle. When the encoder drops from this a

  • Downloads of disappear. Download screen is empty.

    Both registered e-mail files, and downloaded programs disappear (I checked the downloaded programs and downloads).  I am running Vista Home Premium, and Firefox is my browser.  It's a couple of weeks.

  • Whenever I leave Bitlocker services, less than two minutes the service state will be to stop early.

    Hello Are facing a problem with Bit locker whenever I'm bit locker services.msc. within two minutes the service status gets changed to prevent to boot. could not even start the drive encryption. Please help Concerning

  • expdp, impdp in 12 c and 10g

    Hi allWe have oracle 10g release 2 on windows environment. We want to take backup of this database using expdp and import it into oracle 12 c using impdp.How to do this?I use the following approachon 10g database (production):expdp complete system/pa