EM fails to start with NoClassDefFoundError: HTTPClient/ProtocolNotSuppExce

Similar Questions

• EBS fails to start with error afpoload

  Hello
  
  All on a sudden our EBS refuses to start with the following error message. We are on 12.0.6 version, and did not any changes recently. As it is an instance of production, we should be reviving a SR tomorrow when getting to work, but just thought of posting here - just in case some of you have been there earlier. Fast ideas will be highly appreciated.
  
  
  ORACLE APP-FND-01564 942 error in afpoload
  
  Cause: afpoload failed due to the ORA-00942: table or view does not exist.
  
  The SQL statement being executed at the time of the error was: select NODE_ID from FND_NODES where SERVER_ID =: asid and was executed from the file & ERRFILE.
  
  
  Concerning

  Hello

  Changes have been made recently?

  Select FND_NODES where SERVER_ID = NODE_ID: asid and was executed from the file & ERRFILE

  You will find FND_NODES table in the database?

  Have you tried running AutoConfig on the node in database/application layer and see if it helps.

  Please check the file application.log for more information about the error. If no error is detected in the newspapers and the above did not help, then please get the FRD file and post the complete error here.

  Thank you
  Hussein

• Re: Failed to start with Satellite L300

  Hello
  I'm on a Toshiba Satellite L300 Windows Vista,
  I recently had my browser (Google Chrome) freeze so that the page that I was on was using Java.
  I went to reset, but once Vista began to start it would not go beyond the loading bar.
  Then, I went to boot from a drive to install Vista and met the same problem.

  I tried to start with the controller Mode SATA changed compatibility.
  This allowed the Vista disc load up successfully but did not allow for options but command prompt and from the Startup Repair.
  I ran Startup Repair twice and that Vista would load to the top of the loading bar then reset and loop this model.
  I don't know where to go from here, but any help would be greatly appreciated.

  Brad Winn.

  Hello

  Perhaps, your laptop is infected with the virus, and you cannot load windows. You can search and find a software like Kaspersky Anti-virus 8.0.0.506 Emergency Bootable CD and search for viruses. I wonder why you could not start Vista drive in AHCI Sata Controller Mode, I know the sata drivers are already integrated into Vista.

  Run "bootsect/nt60 ALL" into the command prompt, and then press ENTER. Wait and eject the Vista disc, reboot. Hope, it helps to have you tried to install from hard drive recovery image?

  Post edited by: jeka-Israel

• Defender fails to start with error 0x800106ba after application Vist SP 1

  I used Vista service pack 1 and now advocate does not start with a code of error 0x800106BA. I tried to uninstall it, but has not found how do for anywhere. I also tried to reinstall but the system says it is the first part of Vista. Any ideas?

  I used Vista service pack 1 and now advocate does not start with a code of error 0x800106BA. I tried to uninstall it, but has not found how do for anywhere. I also tried to reinstall but the system says it is the first part of Vista. Any ideas?

  You have already discovered, your AV closed your Defender Windiows because your AV has his own Defender, and having 2 defenders on the same machine will create conflicts.

  List of the AVs that will stop Windows Defender are...

  Microsoft Security Essentials
  Norton
  MacAfee
  AVG

  Canoe uninstall you or reinstall Windows Defender. It is part of the operating system. He lives and dies with the system.

  You do not get 0x800106B error code if you try to open Windows Defender, which is disabled by your AV.
  So, question:
  What did you want to do what it will take to open Windows Defender?

  If you try to enter the startup programs, you can do without going through Windows Defender.

  Start < in="" the="" search="" box,="" type="" msconfig=""> Startup tab > here is the list of startup programs...

  To disable - uncheck the box.
  To activate the checkbox....

  WARNING: Make sure that you know for sure to turn it off. If you are not sure, ask first.

• Search service Windows fails to start with error-2147218174

  Windows search has stopped working for my Outlook emails and other areas of the system, I went into the service panel and tried to start the Windows Search Service.  He was able to start with the error 2147218174.

  My first question: what does this number mean?  This number gives a clue as to the cause?

  I tried SFC, but system files are ok.

  I ran the store search & index, but who could not fix, because the service does not start.

  A discussion for a similar sounding problem, Microsoft asked a user to set a may be corrupt user profile by copying to a new.  But this has not fixed the problem for this user, so I probably shouldn't waste time with this step.

  Windows system event log contains the following entry that could give an additional hint:

  DCOM got error '1053' attempt to start WSearch service with arguments "" to start the server: {9E175B6D-F52A-11D8-B9A5-505054503030}

  Around the time this problem started to happen I upgraded a data disc to a hard drive different and changed the drive letter of this data.  Could he have mistaken the search services with the existing database of index and somehow prevents the service to start?

  By chance I came across a possible solution.  I went to "Indexing" / Advanced Options / rebuild the Index and now the Windows Search Service shows that it is "started".

  I am surprised that I have not read this suggestion on the forums of Windows support in response to questions from the other user has the same problem.

  It will be interesting to see if it works in the long term...

• BITS fails to start with error 2147942414 (0x8007000E)

  Windows Update fails, because she needs the BITS service to download files. The BITS service would not, begin to have pointed out the error in the event log.

  I couldn't find this anywhere error code. I spent days looking for the solution when I finally just did this:

  > del C:\ProgramData\Microsoft\Network\Downloader\*

  And the service started. It worked! I write this to save others from wasting a lot of time.

  Hello

  Thanks for the post.

  Also, I would say to users who use XP with SP3, this file link is "c\Documents and Settings\All Users Data\Microsoft\Network\Downloader". After these files deleted or moved to another location, you can start the BITS service.

  Sincerely.

• The PXE using HP on ISO measure fails to start with GROUP

  I have successfully configured a PXE boot using the VMware ESXi 4.1 Update 1 ISO version.  There is a complicated configuration that must be done to make it work (essentially described here: http://www.jayakumar.org/esx/pxe-boot-vmware-esxi-4-1-and-manual-install/):

  -Create a folder in which copy the source files for the installation ISO.

  -Copy the file "imagedd.bz2" on a Linux machine.

  -mkdir Pei usr/lib/vmware/Installer /.

  -mv imagedd.bz2 usr/lib/vmware/installer/VMware-VMvisor-big-4.1.0-348481-x86_64.dd.bz2

  -tar cvzf image.tgz usr /.

  -Copy the file "image.tgz" in the location of the soure file.

  -Place a copy of the file "pxelinux.0" (from version 3.0 of syslinux) in the location of the source file

  -Create a folder called "pxelinux.cfg; Copy the isolinux.cfg file in the pxelinux.cfg file and rename it to 'default '; Edit the file 'default' by adding '-image.tgz ' to the line append.

  If I do the same exact process using ISO custom of HP, the PXE install fails with a GROUP shown here:

  

  Anyone know what could be the problem?  I tried the version from the download site of VMware as well as directly from HP.

  I just had the same GROUP while trying to start an image constructed from HP 4.1_U1_Apr_2011_ESXi_HD_USB_SDImgeInstlr_Z7550_00096.iso

  In my case the problem is proved to be bad tar format image.tgz

  Student vmkernel.log I found visorfstar: entrance to complain about wrong image file.

  When I tried to convert uncompressed image.tar vmtar vgz reported: invalid tar: 'ustar'

  so I 'reconditioned' image.tgz with the utility tar anchored in esxi console and it worked finally.

• The CC extensions manager fails to start with a message "failed to initialize the extensions Manager.

  I installed via Adobe Updater CC CC extensions Manager. When I try and launch the CC extensions Manager, a dialog box appears and says: "failed to initialize the extensions Manager. It won't let me open up after I click OK and it closes.

  The CC extensions manager would conflict with Extension Manager CS6? Other possible solutions?

  I tried to restart, all the CC (and CS6 are up-to-date), and I tried to uninstall and reinstall the CC extensions Manager. Nothing has worked so far.

  Let me know... Thank you!

  Solved.

  What worked for me:

  1 remove an installed copy of the CC extensions Manager

  2. disconnect from the corporate network, log in as a local administrator

  3. download Extension Manager CC of Adobe - Exchange: download Adobe Extension Manager

  4 install

  5 kill the synchronization process of basic creative cloud with the Task Manager

  6. go in C:\ProgramData\Adobe\Extension CC\Configuration\DB Manager and remove or rename the ExMan.db file

  7. start Extension Manager and install extensions

• LoadRunner: LoadRunner fails to start with the message "there are no valid license.

  Hi HP supports,

  Since last night, I have a problem with running HP LoadRunner version 12.50 product controller.

  During loading, LoadRunner opens a dialog box where the following message appears: "there is no valid license. Renewal of license, contact HP Software customer service".

  I tried to fix LoadRunner installation by running the option fix in the installer and also execution of command below (I) has not helped found on another thread:

  regsvr32 "C:\Program Files (x86)\HP\LoadRunner\bin\LRWrapper.dll.

  It's very strange that the community license of 50vusers is active and we have also allowed VUD Global which expires on 19 Nov 2016th (see image). Starting today, this global license VUD is shown as being invalid (!) (attached image).

  Could you please tell me why the license now displays as invalid and how to restart the controller?

  Thank you
  Marko Stankovic

  

  It is the bad company for servers, storage, software, and network. Please use the Hewlett Packard Enterprise Community:
  http://community.HPE.com/T5/LoadRunner-practitioners-Forum/BD-p/SWS-LoadRunner_SF

• X 200 fails to start with white screen

  Hi guys, I made the problem this morning. When I tried to start the computer, it could not start. the machine was normally closed the last time. with no beep, the screen remains white and black, without any modification. After 2 seconds after you press the powerkey, he was arrested with a short beep. Here is what I tried:

  1, use an external hard drive and a disc of windows 7. no reaction.

  2, remove the AC and battery system. Press and hold the power button several times (3 - 5 times) for a 5 secondsReconnect AC account and press the power button - if the system boots normally, stop and insert the battery. does not work.

  Moreover, the machine was purchased in Hong Kong and is still under warranty. However, I am currently in Germany and will stay for another 3 months.

  anyone with any suggestions? Thank you.

  Fixed it by disabling CMOS, wow had

  According to: http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Blank-screen-after-Bios-Upgrade-on-X200/ta-p/29...

• Windows 7 fails to start with the State of 0xc000098 error code problem

  my laptop came with a windows disc it is preloaded.

  When you try F8 start up nothing happens outside of don't go to the screen of the error.

  What should I do next

  Original title: status of problem 0xc000098

  Hello Stephen,

  We are sorry for the inconvenience. Let me help you solve the problem.

  One of the main possible causes of the 0xc000098 error may be missing or corrupt boot manager. The description of the error is related to the Windows Boot Configuration data file does contain not a valid OS entry

  As a recommendation, I suggest visit the Microsoft Help link below and check if it can help solve the problem.

  Use Bootrec.exe in the WINRE to resolve startup problems

  Refer to the section How to run the Bootrec.exe tool

  Now, one of the prerequisites before you run the Bootrec.exe tool is a Windows 7 ISO. So if you bought a full retail copy of Windows 7 earlier, you will need the product key for download support for Windows 7 directly from the download page of software to Download Windows 7 disc (ISO files) Images

  Let us know how we may be able to help you further.

  Thank you.

• Oracle 10g fails to start with a 3G router running

  I don't know where to get help with this problem starting from Oracle.

  
  So far, I have used a HUAWEI dongle directly connected to my PC. Firstly, the operating system and Oracle start, then I connect to internet using the Huawei Mobile Partner. Any application can

  connect to Oracle on the local PC and use it properly. Everything is OK.

  
  Now, I added a 3G router that is connected to your PC via ethernet cable and has the Huawei dongle connected to a USB port on the router.

  
  Everything works fine if I followed the sequence:

  
  (1) to start the PC with the router powered off and wait for Oracle started well.

  
  (2) turn on the router and wait for 2 minutes until Windows shows the 100 MB ethernet link is open. Oracle.exe in the Task Manager is around 210 Mb and sometimes more, depending on the activity. Everything works fine.

  
  However, if I turn on the router first, and then start the PC, Oracle does not start correctly. It rejects requests for connection forever more, indicating the network adapter could not establish the connection: Code 17002.

  In the Task Manager Oracle.exe occupies only 145 Mb. clearly it has not begun.

  My intuition says it's something to do with the network address. When properly, started my address IP is 192.168.1.100, assigned by the router.

  
  What can I do so that he can properly start?  Should what changes I make TNSNAMES, LISTENER and HOSTS to get this working, or to clean them, if necessary?

  
  Where should I look to be able to provide additional information to any useful expert?

  
  Any assistance received with gratitude.

  
  Plomong

  ==========================================================
  Here is my TNSNAMES file. ORA, LISTENER. HOSTS files and ORE:

  
  # Network Configuration file tnsnames.ora

  SAILDICT_SERVICE =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = PCLEKU)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SID = ORACLE)
  (SERVER = DEDICATED)
  )
  )

  GESTOR_CABLES_PRUEBAS =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SID = ORACLE)
  (SERVER = DEDICATED)
  )
  )

  SAILDICT =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = SAILDICT)
  )
  )

  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )

  #################################################################################
  # listener.ora

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (GLOBAL_DBNAME = SAILDICT)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (SID_NAME = ORACLE)
  )
  )

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = ingeteam))
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (ADDRESS = (PROTOCOL = NMP) (SERVER = PCLEKU)(PIPE = ORAPIPE))
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  )
  )
  ###################################################################################
  HOSTS:
  127.0.0.1 localhost
  127.0.0.1 PCLEKU

  Hello

  mention the IP addresses instead of host names, and then see if it works

• Update the RN204 OS 6.6; Update of plex 1.2.2.2857 fails to start with "empty resource error."

  Since the last firmware update to 6.6 on my RN204, the plex 1.2.2.2857 server application version does not work. After installation, when I click on the button 'On', I get the following error: initialization failed: empty resource error. NML bad Call.

  Looked at several threads on Netgear and Plex. Can't find the solution. My plex server is dead!

  Please see https://community.netgear.com/t5/Current-NETGEAR-and-Partners/Problems-running-Plex-Media-Server-aft...

  By restarting your NAS and a handful of minutes waiting should cause the problem to be solved.

• HotSync fails to start with error message

  I'm on a Palm Tungsten E2 on a desktop and a laptop with Windows XP Professional: I regularly Hotsync my Palm on the two, always selecting 'no action' for the system. Unfortunately the last time, by mistake, I chose for this option "Desktop replaces Palm", and, since then, Hotsync does more: pushing the Hotsync button I immediately get the message 'SystemMgr.c, 4038 Error launching application online. The reset button does not solve the problem. Same launch Hotsync in the Applications Launcher. Data on the Palm are unchanged and everything works very good about it, but I can't sync more wiyth my PC.

  Any suggestion? Thank you

  I just paid how to solve my problem. In my post, I said that Reset did not help. I should have specified that reset "smoothly" did not work. I did a Hard Reset, removing all the data on the Palm and Hotsync now works perfectly. I recovered all the data from the Dekktop.

  Thanks for your inquiry.

• Program fails to start with error is "C:\Windows\sysWOW64\mfc42ca2.rra 0 x 5 access is denied."

  Original title: c:\windows\sysWOW64\mfc42ca2.rra access denied 0x5

  What causes this error. message that I get when I use a program installed on my computer

  What program?