Re: Fast draft between Chromebook HP and HP Envy 5530 printer

Similar Questions

• HP Envy 5530: Software and HP Envy 5530 lost hp printer solution Center icon cannot sweep

  When I upgraded to Windows 10 I lost my icon and the ability to scan from my HP computer on my printer HP Envy 5530 wireless. I'm unable to scan from Windows Fax and Scan. I downloaded the latest driver and software from HP. I have uninstalled and installed the software nothing works. Help, please.

  I tested the feature. I have two HP printers and both work with my laptop. I can finally print with my office on my printer HP Envy 4500 (many uninstalls and reinstalls the software.)

  I used the wizard install HP for Windows, but my success was when I found the original installation disc.

  I use McAfee and have disabled and enabled it to the left. I ran doctor Scan and print and it on Rota software I had and "installed a later version" that has not worked. I have therefore re-installed using my original installation disc.

  My basic problem was that I could not scan. I can print but the HP 4500 Printer Wizard Envy series using I get that 'the envy of HP 4500 series is not found'. I tried to unplug the router and switch on the computer and the printer.

  I installed an HP AiO Printer Remote App and I can print it from there, and I AM ABLE to SCAN now with this app.

  Thank you for your help and suggestions.

  roarjmj

• HP ENVY 5530: Printer HP moment of new ink and now can't print with cartridges, I have already

  I recently had my printer replaced by HP due to a fault. I was told to just my HP cartridges that I did. However, I am bound to instant ink all with my printer which means now that I can't use the full ink cartridges that I have.

  Please notice that I am now without once again my printer that is causing me a huge disadvantage tonight.

  Hi @Badger4

  Welcome to the Forums of HP's Support. I understand that you are registered in the instant the ink program and you have had your printer replaced. I would like to help.

  I feel that this printer has not been replaced by the instant the ink Department. That or someone left dropped the ball.

  Instant ink cartridges are "locked" to the printer they are first installed in and may not be used for other printers. Who told you to swap the ink has made a mistake. In addition, your instant ink related to the old printer account must have been canceled. You should have been asked to contact the team of instant ink in order to register the replacement printer.

  You can join the team of instant ink via Facebook, Twitter or call the appropriate phone number. @happytohelp has an answer with all the current contact numbers and times to day. You can find it here.

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• HP envy 5530: printer Cup emails in width and loses 1/3 of the words on the right side

  When printing emails, 1/3 of the words from the inside of the right margin are cut and do not print.

  animal-lovers

  Welcome to the Community Forum of HP.

  Emails are tricky - and not all email clients are the same, neither are the browsers where you can print the email.  Almost anything could break the margins on the right side.

  Please take a look at the following and see if anything here helps - and you can also try opening your emails using another browser, too.  Yes, I know - eew.  But it might help to see what is happening.  In addition, it could give you an idea, if the problem is universal, i.e. emails look bad / feel bad no matter what you use.

  You might be able to use 'Fit to page' in print preview mode, or you might be able to control the margins by adjusting the actual "margins" - also in mode print preview.

  If all else fails, you may view the email and take a 'Snip' from the email, save it and then print the image you saved.  Ick.  But it could be something that you could use as a last resort.

  Manage the print with preview output before printing

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Printing problems home network between Windows XP and Windows 7 PC base

  I've seen a number of comments about problems between Windows 7 and Windows XP computers print domestic network.  In my case, I have a new Windows 7 Desktop connected to my printers and wireless modem and I use several portable Windows XP in the House that I am trying to reconfigure to wireless network printing.  My old desktop running Windows XP and I had this printer sharing wireless works fine.  I can't get the right of sharing the printer with Windows 7.

  Can anyone help?

  Roger Phillips

  This sounds like the correct driver and is supposed to be OK for the network or directly connect according to the HP website.  There could be something in the fine print of the following HP support document that will help you: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02171232&lang=en&cc=us&taskId=101&contentType=SupportFAQ&prodSeriesId=1845551&prodTypeId=18972 otherwise, the guided "Troubleshooting," "automatic Driver Verifier", or links to "Resources for collaboration" in what follows may help: http://h20000.www2.hp.com/bizsupport/TechSupport/SupportResources.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=1845551

• Explain the relationship between libraries, albums and photos in pictures.  Where are the images stored?

  Looking for info on the relationship between libraries, albums and photos in the Photos app.  I can create several libraries containing photos and unique albums.  Can I put the same photo in libraries and the different albums?  By making a copy it creates a link to the original or a new photo?  Where are located the photo files?  When scanning photo to my Mac Pro files are placed in a folder structure, copy these photos in an album Photos using the original file or he places a copy in a database?

  Bottomline, I'm frustrated by the method of collection, the albums, the place and date.  I want store related photos in a separate album.   Example: A library for a family, containing albums of members of their family. Maybe the photos have duplicate in different albums.

  Some of your questions are answered by Leonie contributor in this thread:

  Re: Too many libraries...

  More answers can be found by using help in Photos app, or in general to help the Viewer.

  Apple Support website has links to information in articles; a search on the web is sometimes useful

  to locate the Apple pages faster than the company's site. Others in line include:

  Photos for OS X FAQ:

  http://www.IMore.com/photos-OS-x-FAQ

  How to use the Photos for OS x:

  http://www.IMore.com/how-use-photos-OS-x-ultimate-guide

  Good luck!

• What is the best way and to share data between a server and a Client app?

  Hello

  I'm trying to communicate a Client-Server application.

  In fact, I already have a simple data transfer via TCP/IP. However, I don't know yet, if TCP/IP is the best (and by that I mean, better, faster, safer, etc.)

  How to do.

  What are the cons and Pros between TCP/IP, STM and shared Variable?

  Do you recommend another type of communication in addition to these 3?

  Thank you

  Matt.

  In my view, that a general question cannot have a response says.

  Then, there is no way 'the best' for sharing data between a client and a server app.

  I like to use TCP/IP, but sometimes (when data loss is not critical) I use UPD (quick and dirty).

  I generally avoid shared variables, especially on embedded devices.

  Some other times I have I like to Exchange data in a database...

  A few other times I Exchange data using file...

  Marco

• Photosmart c3180: c3180 will only print in fast draft mode

  I can only print in fast draft mode.  If I try fast normal, normal, or best etc. the paper through the machine and it spits out without printing. If I have multiple pages to print, it only spits out a no printed page and then closes.   I tried to print in many different programs and they all have the same law.  It makes no difference if it is color or black and white.

  Hi @kbsh9884

  I think it would be better to start our trip troubleshooting by running the print and Scan Doctor (PSDR). Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

   

• No mapping between account names and security IDS made mistake by attempting to use the Task Scheduler

  I have noticed that my msfeedssync.exe were not working or updated so I went to the Task Scheduler to see what was going on and received the number above mapping between user names and security ID error I never use Task Scheduler, but I do not know its also used for RSS updates , I do all my own maintaince so I need only of GI RSS using a 3-year-old dimensions of dell with xp pro and its in tip top except for that shape it came only with a 80 GB hard drive and I've only used 20 concerts in 3 years that I use online for things important and backup storage I hope there is a solution for this because I installed ram to 4 GB and it has a 2.8 ghz Processor blazin fast and is in very good shape all help will be appreciated thanks

  Hello syncere99,

  1. What is the user account in the Task Scheduler are you for the work you are trying to use the Task Scheduler?

  The error code indicates that the user account that was used to create the job no longer exists. This could be because the user account is deleted. I suggest that you remove and re-create a job and check if you have the same problem.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Unknown device on network adapter between the laptop and the wireless router

  I am running windows 7 64 bit on a laptop computer connected wireless to the router and internet.  The router is Linksys WRT160N connected to the internet.  The map of the network, there is a question mark device unknown between the laptop and the router.  However, I still have access to the internet.  In terms of network, if I hover over the laptop, it does not show an IP address.  It only shows the name of the computer and its MAC address.  Any help would be appreciated.

  Solved my problem.  I checked the button of the IPv6 protocol in the properties of a network connection on the laptop, and now I can see it's the IP address and the unknown device has been replaced by a switch and hub which is part of the router.   I do not uncheck the button IPV4.  I'm guessing that it is a bug in Windows 7 that you need to cut of ipV6 Protocol when you have a Win XP computer on the network if you want to see a map of own network.  As I said before, everything worked before, so this seems to be a cosmetic fix only.  I see that my shared files on the XP computer appear faster after a reboot.

• Difference between Adobe Reader and Adobe Acrobat Reader DC, please?

  I always check manually (and daily) for updates. A few weeks back, I checked for updates of Adobe Reader 11 and found nothing, but found only adobe Acrobat Reader DC listed. I assumed it was the newest Adobe Reader 11 and downloaded and installed Acrobat Reader DC replacement. No problem, very well.

  Moving fast until today when I checked the updates to the Acrobat Reader DC, and I found an update for Adobe Reader 11 (Version 11.0.11). So, what is the difference between Adobe Reader and Adobe Acrobat Reader DC? Should I stay with Adobe Reader? I'm confused! (Thanks a lot).

  New name, same thing.

  Adobe will continue to publish updates of Player 11 for a while, but they will not be security update.

  DC is actually version 15. Or 2015. Depends on how count you.

• Replication of data between SQL Server and using Oracle11g materialized view.

  I have Sqlserver 2005 as my source and oracle11g as my target. I need fill out the target daily with change of the source data.
  to do this, we created a dblink between SQL Server and oracle and reproduced this table as a point of view, materialized in Oracle.
  problem that we get here is fast refresh option is not available.each day it will pick up all of the data source.
  is it possible to use Fast refresh in this scenario?
  
  Thanks in advance.
  
  Kind regards
  Balaram.

  You can try MS SQL replication.
  Configure transactional Standard of MS SQL and Oracle Publication subscriber http://msdn.microsoft.com/en-us/library/ms151738%28v=sql.90%29.aspx

• Difference of path between primary key and a Unique Index

  Hi all
  
  Is there a specific way the oracle optimizer to treat differently the Primary key and Unique index?
  
  Oracle Version

  SQL> select * from v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  PL/SQL Release 11.2.0.3.0 - Production
  CORE    11.2.0.3.0      Production
  TNS for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production
  NLSRTL Version 11.2.0.3.0 - Production
  
  SQL> 

  Sample data test for Index Normal
  

  SQL> create table t_test_tab(col1 number, col2 number, col3 varchar2(12));
  
  Table created.
  
  SQL> create sequence seq_t_test_tab start with 1 increment by 1 ;
  
  Sequence created.
  
  SQL>  insert into t_test_tab select seq_t_test_tab.nextval, round(dbms_random.value(1,999)) , 'B'||round(dbms_random.value(1,50))||'A' from dual connect by level < 100000;
  
  99999 rows created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> exec dbms_stats.gather_table_stats(USER_OWNER','T_TEST_TAB',cascade => true);
  
  PL/SQL procedure successfully completed.
  
  SQL> select col1 from t_test_tab;
  
  99999 rows selected.
  
  
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 1565504962
  
  --------------------------------------------------------------------------------
  | Id  | Operation         | Name       | Rows  | Bytes | Cost (%CPU)| Time     |
  --------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |            | 99999 |   488K|    74   (3)| 00:00:01 |
  |   1 |  TABLE ACCESS FULL| T_TEST_TAB | 99999 |   488K|    74   (3)| 00:00:01 |
  --------------------------------------------------------------------------------
  
  
  Statistics
  ----------------------------------------------------------
            1  recursive calls
            0  db block gets
         6915  consistent gets
          259  physical reads
            0  redo size
      1829388  bytes sent via SQL*Net to client
        73850  bytes received via SQL*Net from client
         6668  SQL*Net roundtrips to/from client
            0  sorts (memory)
            0  sorts (disk)
        99999  rows processed
  
  SQL> create index idx_t_test_tab on t_test_tab(col1);
  
  Index created.
  
  SQL> exec dbms_stats.gather_table_stats('USER_OWNER','T_TEST_TAB',cascade => true); 
  
  PL/SQL procedure successfully completed.
  
  SQL> select col1 from t_test_tab;
  
  99999 rows selected.
  
  
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 1565504962
  
  --------------------------------------------------------------------------------
  | Id  | Operation         | Name       | Rows  | Bytes | Cost (%CPU)| Time     |
  --------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |            | 99999 |   488K|    74   (3)| 00:00:01 |
  |   1 |  TABLE ACCESS FULL| T_TEST_TAB | 99999 |   488K|    74   (3)| 00:00:01 |
  --------------------------------------------------------------------------------
  
  
  Statistics
  ----------------------------------------------------------
            1  recursive calls
            0  db block gets
         6915  consistent gets
            0  physical reads
            0  redo size
      1829388  bytes sent via SQL*Net to client
        73850  bytes received via SQL*Net from client
         6668  SQL*Net roundtrips to/from client
            0  sorts (memory)
            0  sorts (disk)
        99999  rows processed
  
  SQL> 

  Examples of test when using primary key data
  

  SQL> create table t_test_tab1(col1 number, col2 number, col3 varchar2(12));
  
  Table created.
  
  SQL> create sequence seq_t_test_tab1 start with 1 increment by 1 ;
  
  Sequence created.
  
  SQL> insert into t_test_tab1 select seq_t_test_tab1.nextval, round(dbms_random.value(1,999)) , 'B'||round(dbms_random.value(1,50))||'A' from dual connect by level < 100000;
   
  99999 rows created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> exec dbms_stats.gather_table_stats('USER_OWNER','T_TEST_TAB1',cascade => true);
  
  PL/SQL procedure successfully completed.
  
  SQL> select col1 from t_test_tab1;
  
  99999 rows selected.
  
  
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 1727568366
  
  ---------------------------------------------------------------------------------
  | Id  | Operation         | Name        | Rows  | Bytes | Cost (%CPU)| Time     |
  ---------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |             | 99999 |   488K|    74   (3)| 00:00:01 |
  |   1 |  TABLE ACCESS FULL| T_TEST_TAB1 | 99999 |   488K|    74   (3)| 00:00:01 |
  ---------------------------------------------------------------------------------
  
  
  Statistics
  ----------------------------------------------------------
            1  recursive calls
            0  db block gets
         6915  consistent gets
            0  physical reads
            0  redo size
      1829388  bytes sent via SQL*Net to client
        73850  bytes received via SQL*Net from client
         6668  SQL*Net roundtrips to/from client
            0  sorts (memory)
            0  sorts (disk)
        99999  rows processed
  
  SQL> alter table t_test_tab1 add constraint pk_t_test_tab1 primary key (col1);
  
  Table altered.
  
  SQL> exec dbms_stats.gather_table_stats('USER_OWNER','T_TEST_TAB1',cascade => true); 
  
  PL/SQL procedure successfully completed.
  
  SQL> select col1 from t_test_tab1;
  
  99999 rows selected.
  
  
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 2995826579
  
  ---------------------------------------------------------------------------------------
  | Id  | Operation            | Name           | Rows  | Bytes | Cost (%CPU)| Time     |
  ---------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT     |                | 99999 |   488K|    59   (2)| 00:00:01 |
  |   1 |  INDEX FAST FULL SCAN| PK_T_TEST_TAB1 | 99999 |   488K|    59   (2)| 00:00:01 |
  ---------------------------------------------------------------------------------------
  
  
  Statistics
  ----------------------------------------------------------
            1  recursive calls
            0  db block gets
         6867  consistent gets
            0  physical reads
            0  redo size
      1829388  bytes sent via SQL*Net to client
        73850  bytes received via SQL*Net from client
         6668  SQL*Net roundtrips to/from client
            0  sorts (memory)
            0  sorts (disk)
        99999  rows processed
  
  SQL> 

  If you see here the same even as the statistics were gathered,
  * In the 1st table T_TEST_TAB, table always use FULL table access after creating indexes.
  * And in the 2nd table T_TEST_TAB1, table uses PRIMARY KEY as expected.
  
  Any comments?
  
  Kind regards
  BPat

  >
  * In the 1st table T_TEST_TAB, table always use FULL table access after creating indexes.
  * And in the 2nd table T_TEST_TAB1, table uses PRIMARY KEY as expected.
  >
  Yes - for the first table a full table scan will be used as the currently selected column is nullable and indexes do not include null values.

  The index can be used for the second query, since all the data (first column) is available between the index and there may be no NULL values because of the primary key. If you check constraints, you find that the there is now a CHECK constraint to ensure that the first column cannot be null.

  For a full and interesting discussion see the explanation of this and a related issue on the question I ask in this thread
  What SYS tables (not seen) contain the value NULL spec /not/ column definition? and my response he posted: 23 April 2012 09:02

  I ask the question is based on a question here which is similar to yours
  Columns becoming nullable after a fall of primary key?

• keyboard shortcut to switch between the background and outline in flash?

  It becomes tedious to have to scroll over the swap icon to switch between the background and outline. I'm on a macbook pro and had no chance of finding a shortcut or hotkey for it.  This would make my work flow a lot faster if there was a.  If anyone knows a shortcut, please hit me with it. It would be greatly helpful!

  -Steven

  To do this use jsfl:

  setStrokeColor.jsfl:

  fl.getDocumentDOM () .setFillColor (document.getCustomFill("toolbar").color);

  setFillColor.jsfl:

  fl.getDocumentDOM () .setFillColor (document.getCustomFill("toolbar").color);

  Link these jsfl files in your commands menu and assign shortcuts to them.

  To locate the folder where these commands on your machine/OS google: "Flash orders location JSFL.

• Difference between external tables and sql * loader

  Hello
  
  Could you please tell me the difference between
  tables external and sql * loader
  
  I have serached on the net but did ' get correct idea
  
  Please help me

  1 SQL LOADER can be run on the network (from any client computer), external tables can't

  2. return to the Oracle 9, external Tables could not load CLOB/BLOB (Oracle10 changed it)

  3 oracle 11 external tables have preprocessor, which is pretty dam characteristic cool - running essentially any OS command e.g. decompress before external table run. What's even better is the fact that the result of the operating system command is the source of the outer table, which means that there are no required temporary file (unzip the tracks and the output is the source of the external table). There are several ways to great use this - look at my blog for samples rare http://jiri.wordpress.com/2010/01/19/no-more-unix-scripts-in-11-2/

  4. as long as the 009 stressed, filed external load anything, they show just. Think of it more as load on request - it's great if you have old files archived and one or two users what to see content once a while

  5. external tables require no user access to the operating system, it is oracle environment pure - this may seem minor but for me it's huge. The fact that the ETL needs no special unix, no control file command and uses the simple SQL and DDL is nice and important

  6. external tables can load more text files, Oracle export dump files can be loaded, perhaps in the future more formats will be supported (hopefully all right excel format?)

  now the same thing to kill the myth - the TWO are EXACTLY the same when it comes to speed, I would actually drive of the external tables before will be faster because sql loader is old technology oracle doesn't really develops more