Re-install Windows 8 with AxshunJaxun Guide, Windows activation?

Similar Questions

• Need help with installing Windows XP on Satellite A60

  I have toshiba satellite A60 and I need to know the steps for reformatting the hard drive and installing Windows XP. What do need me and how?

  also... How can I save all the files and email on Microsoft outlook? I'm not well experienced with this.

  Hello

  the XP installation is very simple. Just put the CD in and to start the installation, the installation wizard will guide you through the entire process. A little advice: when it comes to partition the disk, delete the old partition, create a new and format it in ntfs. Don t worry, the installation wizard will guide you very detailed hollow that deal so it's going to go very easily.

  Regarding your backup:

  It's my way of backing up my files:
  I have an external USB-drive HARD drive and I put all my files on it, so I can copy them back after that I have put in a new system. To save your outlook, you can visit this site:

  http://www.sitedeveloper.WS/tutorials/Outlook.htm

  They describe very well how you back up outlook.

  Good luck
  Welcome them

• Is it possible to install Windows XP with USB / (Pendrives) with a CD?

  is it possible to install windows xp with USB / (Pendrives) with a CD?
  my CD drive is not working... but I need to upgrade xp... How do with usb?
  a pls answer

  * original title - request for installtion xp... *.

  is it possible to install windows xp with USB / (Pendrives) with a CD?
  my CD drive is not working... but I need to upgrade xp... How do with usb?
  a pls answer

  * original title - request for installtion xp... *.

  Installation of Windows Xp from a usb key involves a lot more than simply copy the files from one windows on a USB disk. It is much more difficult than don't imagine most (but not impossible). I did it a few times. Read the instructions on the two links below. The first link below is your best bet. You are not likely to do things immediately. It's ok, we are here...

  Install Windows XP using USB Flash disk / Flash Drive - step-by-step Guide

  Install XP from USB - reboot.pro

• I can't dual boot my PC pre-installed Windows 7 with Windows XP?

  I created a primary partition on my Windows 7 PC preinstalled in freeing up space. When I start my PC the Windows XP installation CD, Windows XP will in the usual configuration process by displaying the F6 option on the screen blue etc and it unloads the controllers and disks required.  However, when the installation phase starts, an error message appears: "a problem has been detected and windows has shut down to prevent damage to your computer.  Continue displaying the error message "If this is the first time you've seen this stop error screen, restart your computer. If this screen appears the following steps - check for viruses, run Chkdsk.  It is followed by a time code error stop: 0X0000007B etc.  Please note that I checked my computer for any viruses and none have been reported.  I ran CHKDSK in guest of user privileges to administrator and windows has checked the file system had no problem.

  It is important to mention that since I managed to install a copy of Windows Vista on my PC pre-installed Windows 7 without any problem.  I can now now dual boot between the two OSs.  Unfortunately, I can not install a new genuine copy of Windows XP on my PC.  I get the same old error message after configuring setup blue screen whenever I try to install Windows XP.  Now, it seems that I have to buy another PC to install XP despite the fact that I have a lot of space on the hard drive of Windows 7 preinstalled PC.  I am aware of the fact that Windows XP uses a different startup for Windows 7/Vista file, but my computer must always allow Windows XP install.

  I am just totally baffled by the latter.   It is normally recommended to install Windows XP before Windows 7, but because my PC is preinstalled with Windows 7, this recommeded option has not been available to me.  I would appreciate any suggestion to this problem of people there.

  Thank you

  Martin

  "the SATA driver will be included in the Chipset Drivers?" - Yes they are generally at least that your SATA ports are connected to a separate SATA/RAID chip.

  There are two good utilities to create a "SlipStreamed" CD
  (1) Autostreamer - easy to use. (Only not for the integration of the drivers)
  (2) nLite - which is more complex, but you can integrate drivers
  and much more. http://www.nliteos.com/nLite.html
  nLite Guide: http://www.nliteos.com/guides.html

  J W Stuart: http://www.pagestart.com

• I installed Windows XP Professional on MacBook Pro with Dell-branded OS. How can I legally activate it?

  I installed Windows XP Professional on MacBook Pro with a Windows XP CD is a Dell machine.

  I want to activate windows now, but I came to know that the Windows XP Professional license is no longer available on the market.

  Please guide me this license to purchase to activate it?

  If the Windows 7 key can activate windows XP Professional?

  I don't want to go to Windows XP Mode because we have one standard on our local network for all PC is Windows XP Professional.

  Thank you

  Khawar Pasha

  First of all - what you were doing was not a legitimate path in the first place.  The Dell OEM was probably already used on a Dell system at some point.

  Second - to activate Windows XP Professional OEM, you need a product key for Windows XP Professional OEM.  No, the Windows 7 licenses will not help you.

  Probably your only choice (and is not the best) is to locate someone sell Windows XP Professional on the Internet, find the provider that you can trust most, purchase and use of the CD and the product key you get to install.

• I would like to re - install Windows Vista, but my drive does not all service packs. Download Windows Vista with service pack already on it?

  so, I'm running vista 64 bit basic, I want to do a fresh install,

  but my drive is very early (noservice packs ect) can I download of ms a basic family of complete up-to-date vista 64-bit with sp2 with my cd key? or should I shut up and make from my cd and cope? If I do a reinstall should I reinstall all my programs as well?

  Hello yaleblor,

  You can download the full SP2 for Vista from here: http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Save the file to a CD/DVD or USB key.

  Once you have the service pack downloaded file, you can use your current Vista CD to install a fresh copy of Windows Vista on your C: drive. Once you have installed Vista you can install service pack 2 directly from the CD/DVD or USB you originally stored it on. All you then need to do is to run the Windows updates to update your system completely.

  You can find out how to do a clean install by looking at this link from my Web site: http://vistasupport.mvps.org/install_windows_vista.htm

  After you install Windows Vista, you will need to re - install all your programs, so make sure that you have all the programs by hand before starting to consider reinstalling Windows.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How can I install Windows Xp with Windows Vista?

  INSTALLATION OF WINDOWS XP WITH WINDOWS VISTA?

  I HAVE WINDOW VISTA HOME PREMIUM 32-BIT IN MY SYSTEM, BUT SOME OF MY SOFTWARE IMPORTANT DO NOT INSTALL VISTA SO I TRY TO INSTALL WINDOWS XP WITH VISTA BUT IT DOES NOT WORK.
  AFTER AWHILE, I SEE THE TYPE OF HARD DRIVE IN MY SYSTEM IT IS AHCI IN THE CASE OF VISTA, WHEN I CHANGE TO THE SECOND IDE TYPE THEN XP IS INSTALLED AND WORKING BUT VISTA IS DEAD AND WHEN I CHANGE TO NEW TYPE OF DISC TO AHCI THEN VISTA THROUGH REPAIR AND BECOME WORK VERY WELL , BUT DESTROYED XP.
  BOTH THE WINDOW WORKS ON DIFFERENT DISC TYPE AND WHENEVER THE DISC TYPE CHANGE, IT WILL TAKE VERY LONG TIME TO FIX THE WINDOW.
  IT BECOMES IRRITATING.
  WHY I CAN'T USE THE WINDOW AT THE SAME TIME?
  SO PLEASE GIVE ME THE GUIDE-LINE STEP BY STEP HOW INSTALL WINDOW XP WITH VISTA?

  Hi AbidAman,

  I suggest to check the following items and check.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

   

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

   

  Install multiple operating systems (multiboot)

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-more-than-one-operating-system-multiboot

   

  Set up a dual-boot system

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-dual-boot-system-from-Windows-Vista-inside-out

  Hope this information helps.

• How to install windows 7 on vista 64-bit with USB key or usb hard drive

  I use windows vista 64 bit on HP Pavilion dv9925nr. HL-DT-ST DVDRAM GSA-T40L ATA Devicedisappeared 'my computer' and 'Device Manager' list a few days ago. There is no upper and lower filter. Device is that in the "boot order" Start menu device sometimes comes for everything and disappears again. ROM has the power. Opening of the shutter. Device works beacause I copied a cd when it was clear. I think that this problem is related to the software. When the device appeared I also uninstalled from Device Manager and looked for a device change so she is back, but after some time again say aapeared. I want to try once by complete control of formatting and install the new copy of windows 7 and let see if the appliance becomes stable. I can't install with cd rom then how to install using a drive hard usb (WD 200 GB).
  Please suggest.

  Remember that HP does not list Windows 7 device drivers, that's why your computer is not compatible Windows 7.  HP Driver support: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3740568&lc=en&cc=us&dlc=en&lang=en&cc=us

  ==================================================================

  Windows 7 USB/DVD download tool:
  http://store.Microsoft.com/help/ISO-tool

  Create a bootable USB:
  http://www.victorchen.info/create-a-bootable-USB-memory-stick/

  Install Windows 7 from USB drive/key:
  1) http://www.maximumpc.com/article/howtos/how_to_install_windows_7_beta_a_usb_key:
  ( http://www.windowsvalley.com/blog/install-windows-vista-and-windows-7-using-bootable-usb-storage-device/ 2)
  ( http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/ 3)
  4) http://technet.microsoft.com/en-us/magazine/dd535816.aspx

  How to create and make Bootable in Windows 7 ISO from EXE Plus Setup1.Box and setup2. Box:
  http://www.mydigitallife.info/2009/10/23/how-to-create-and-make-bootable-Windows-7-ISO-from-exe-plus-Setup1-box-and-setup2-box-files/

  Also: A quick way to get your Windows 7 into a bootable DVD:
  (This guide is for people using the upgraded version of the students, composed of)
  Setup1.box, Setup2.box and Win7-P-Retail-en-us-x64)
  http://www.TomsHardware.com/Forum/1392-63-Windows-upgrade-bootable-guide-having-issues

  How to install Windows 7 from a USB stick without DVD ISO of Windows 7:
  http://www.Blogsdna.com/2016/how-to-install-Windows-7-from-USB-drive-without-Windows-7-ISO-DVD.htm

  How to install Windows 7 from a Flash drive with XP or Vista:
  http://www.legitreviews.com/article/1031/2/

  Use a USB key to install Windows 7 - even on a Netbook:
  http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

  Cannot install Windows 7 error USB "Setup could not create a new partition system:
  http://social.answers.Microsoft.com/forums/en/w7install/thread/4b3c0430-9E41-47F6-b1cd-aed55fea7dad

  J W Stuart: http://www.pagestart.com

• Install Windows 7 on the same computer with different drives

  I plan on building my first computer soon and I want to run Windows 7 Home Premium.  If I install this version of Windows 7 and that I update the processor or hard drive later, I'll be able to install it again? http://www.Amazon.com/Windows-premium-64bit-System-Builder/DP/B004Q0PT3I/ref=sr_1_1?ie=UTF8&QID=1348592929&SR=8-1&keywords=Windows+7+Home+Premium

  One of the comments said that Windows 7 is is only related to the motherboard, if I want to get a couple more opinions.  Thank you!

  Upgrading the hard drive won't be a problem. Simply create a backup of the Image the old drive and restore to the new drive.

  How to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
  A step by step guide on the use of Acronis True Image Home 2011.
  http://www.PAGESTART.com/acronisnewharddrive01.html

  How to pass windows 7 hard disk nine or greater using the backup and restore of Windows 7
  http://www.PAGESTART.com/win7bckuprstrnhd072610.html

  How to pass Windows 7 on a larger hard drive
  http://notebooks.com/2011/02/16/how-to-move-Windows-7-to-a-larger-hard-disk/

  Restore your computer from a system image backup
  http://Windows.Microsoft.com/en-us/Windows7/restore-your-computer-from-a-system-image-backup

  ==============================================

  Change the CPU may require a different motherboard, so if you change just the CPU using the same motherboard, you may need to reactivate over the telephone.

  However a "of System Builder (OEM) version of Windows 7 is related to the first motherboard install you it, so if this CPU upgrade also requires a different motherboard / new then the Integrator version will be more usable (will activate not)."

  ==============================================

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Install windows on mac pro (early 2008) in other SSDS with RAID card

  Guys, good evening to all the same time.

  I get out of this crazy short, I ask humbly help.

  I explain my problem:

  I have a Mac Pro (early 2008), with RAID CARD MEDIA

  He does not then I "gave" to my mother who must use windows for work.

  I'm out all 4 disks in RAID installed and mounted 2 - SSD OCZ Agility 256 GB.

  one of them is installed OSX Yosemite. on the other hand, I want to install WINDOWS.

  and here the problems begin:

  When I insert the win8.1 to proceed installation standard dvd (EFI not talked since the beginning of 2008), I get, when I have to decide on which disk to install and format windows, does not reveal the installed drives

  After 2 days of tweaking, I was able to understand that this is a problem due to the RAID card installed, I also read that you just remove it and connect the SSD in one of the two doors empty ODDsata (and not in the 4 planned the raid card slots)

  but still does not see the attached HDD / SSD, so keep trying and I think it's a driver problem and I need to install the AHCI driver, now, I'm pretty Nerd, but I still can't get.

  Someone could want explain step by step what I need to do to install this * win on MacPro 8.1 designed for RAID card?

  Thank you so much in advance.

  A welcome message

  Ruggero

  If you remove the card RAID Apple on the Mac, you MUST connect the iPass cable on its location on the motherboard, or all four bays are unusable:

  

  .

• Need help with installing Windows

  I recently did a full format my computer and re-installed Windows software.  I can't access the internet then I downloaded the drivers and my flash drive to move them to the computer, that I corrected.  Now internet will not work. It was my first time trying this and I want to just make sure I did everything right.  I do not have the recovery discs and HP does not provide them to my computer as they said that the computer was obsolete.  I'm running an HP Pavilion a310e series.  Help, please.

  If you have problems with the integrated ethernet controller, you must download and install the chipset drivers nForce2 for any operating system you have installed on the PC.

  Specifications of the motherboard you:

  http://support.HP.com/us-en/document/c00006476

  To download and install the driver, go to the section of downloads from nVidia, gnaw legacy and nForce 1/2, select your operating system.

  For XP, it would be here:

  http://www.nvidia.com/object/nforce_udp_winxp_5.10.html

• Clean install Windows 7 with UEFI in dv6-7215nr

  Hi, I would like to do a clean install of my HP dv6-7215nr Windows 7 Enterprise SP1 x 64 envy laptop.

  To this end, I have 3 questions to solve some installation issues.

  1. What are the steps to clean install Windows 7 SP1 Enterprise intact in UEFI mode?

  I tried to install Win 7 after the pre-requisites following:

  (a) not partitioned 200 GB free space on the disk (only 1 physical disk)

  (b) already installed Windows 8 files with UEFI

  (c) UEFI enabled

  (d) heritage disabled startup

  (e) secure boot disabled

  When I Boot in UEFI of CD/DVD, I can't switch to the Windows startup screen, it just hangs. What I am doing wrong? Is there any other prerequisites that I don't know?

  I tried to install UEFI with Legacy enabled Boot, and I installed win7 but I can't disable Legacy new Boot because Win7 boot and I want only the UEFI Boot and need for inheritance disabled.

  2. where can I download drivers for Windows 7 for my laptop?

  I found this topic:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-envy-DV6-7210ei-downgrade-fr...

  They point to these drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & dlc = in & lc = in & product = 5273735 & task = &

  I think I could use these drivers, but I need just in case where. I guess they should work as the product names are roughly similar (with mine).

  3. is it possible to Secure Boot with Windows 7 SP1?

  I have no research on this so far.

  Thanks for the help that someone in the community can give to me, it is not important all the problems that I have set in I can still do research on questions 2 and 3 and help others with my research if I can do it before a response. Any info you can give me will be too great.

  Carlos

  (1) ' secure Boot' must be DISABLED and 'Legacy Support' must be ENABLED to install Windows 7 and many other older operating systems. The bootable media must support UEFI boot to install on a GPT-partitioned drive.

  You let people with DISABILITIES 'Secure Boot' (and 'Legacy Support' ENABLED) once you have installed Windows 7. Changing these options causes Windows 7 to start is no longer.

  (2) the Windows 7 drivers on the CTO Entertainment Notebook PC drivers HP Pavilion dv7t-7000 page you referenced, will work on your computer.

  (3) it is not possible to install or use Windows 7 with "Secure Boot" ACTIVE.

  WARNING *.

  HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP cannot provide the drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in the 'Configuration of the BIOS start-up secured' on the page parameters below, until you try to install Windows 7.

  

  In addition, as the hard drive is probably partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" or "UEFI - USB Flash drive" options in the boot menu "F9". If "UEFI - CD/DVD drive", "UEFI - USB Flash drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have missing or unknown devices after installing the drivers, please post to the "Hardware ID" Device Manager (just the text string will do) to these devices as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Satellite A300-1EG: problem with the touchpad after installing Windows 7

  Hello!

  I had a problem with my touchpad since I installed Windows 7 (64-bit version) on my laptop (Toshiba) A300-1EG.

  I tried many different solutions to this problem.
  I checked the alignment of the touchpad (be it on) in the BIOS, I tried to install several drivers (on a site of Synaptics, automatically by Windows) and none of these work. Of course, I tried FN + F9 key combination.
  When I check the alignment of the touchpad in the Control Panel, everything seems fine. It is written, that "device working properly.

  I have Toshiba Software, what may be the cause of the problem?
  But I have no idea where I can find something.

  I'd appreciate any help.

  I hope to be understandable - English is not my mother tongue :) Thank you very much in advance for any ideas. :)

  Hi mate

  I'm not quite sure what problem you have but you should first try to install the necessary drivers touchpad m.
  Maybe you used the wrong driver in the past

  So Sat A300-1EG belongs to the series of PSAG4E.
  The European driver Toshiba page does not provide a special touchpad driver for Win 7 for this device.

  But I noticed that Win 7 64 bit drivers touchpad (Alps & Synaptics) for Satellite L500 PSLS3E series is released on the European driver page.
  Try both drivers Touch Pad for this device and test it!

  Welcome them

• Can I install windows 7 on early 2015 macbook pro version with El captain?

  Can I install windows 7 on early 2015 macbook pro version with El captain?

  Thank you

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

  Check the tables in the link I provided to see if your computer works for Windows 7.

• Portege 3490, to install new HDD with windows xp ready?

  My hard drive failed recently on my portege 3490. I bought a 20 GB seagate replacement hard drive. I installed Windows XP pro by connecting the drive (via adapter) to my office and ran the installation cd.

  I thought that I could then just mount the drive in the Portege and be good to go. However when I turn right away on the system asks me to insert the disc system.

  I don't have a floppy drive and my single cd is a USB and I can't use it to start.

  Someone at - it any ideas how I can get this working?

  I plugged my other laptop (Toshiba no) with the same drive and it booed immediately. Thanks for your help

  [Edited by: admin on 27 June 05 07:03]

  Hello

  Unfortunately I have no drivers list, but on the download from Toshiba site you will find about 18 different drivers for your device using BONE of W2000. Check it on http://eu.computers.toshiba-europe.com

  As far as I know, it won't be easy to do something without floppy drive. I have no much experience with the Portege series but you can try to make two partitions on the second, you can copy the OS disk and start the installation of this partition. Even if you do this, you must start the unit with the startup disk.