Re-install Windows Firewall

Similar Questions

• How to install windows firewall

  How can I easily install Windows Firewall?  Thank you.

  Enable or disable the firewall of Windows

• ERR code 0x6D9 when installing windows firewall

  When chicking to see if the firewall is turned on it say firewall windows does not use the recommended settings and I have tried everything I can read and follow to fix but does not work

  Please, try the following:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Security/Windows-Firewall-error-code-0x6d9/7a63ebe7-40b3-45A7-91D8-4ea5592543ac

• Why windows cannot display windows firewall settings

  this happen after I have uninstall Security Live and has replaced it with AVG.

  seem live security insist on product user purchased it thru online using credit card or

  one kind of virus trying to trick me so I took it on.

  Hello

  I suggest you follow these methods and check.

  AVG has built-in firewall. If AVG firewall is enabled by default, the Windows Firewall is disabled for more information on AVG firewall configuration contact AVG:

  http://www.Avg.com/us-en/support
   
  However, try the following steps to access the Windows Firewall.
  Method 1: Re-register shunimpl.dll and check.

  a. click Start - run.

  b. area in open, type cmd and then click OK.

  c. at the command prompt, type the following line and press ENTER:

   

  regsvr32 hnetcfg.dll

   

  If the method above does not work, proceed to the next method.

  Method 2: Install Windows Firewall then check for the issue.

  Follow these steps and check:

  a. Click Start, click Run, type cmd and then click OK.

  b. at the command prompt, type the following command and press ENTER:

  Rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf

  c. restart Windows,

  d. click on start, run, type cmdand then click OK.

  e. at the command prompt, type the following command and press ENTER:

  Netsh firewall reset

  f. Click Start and run, type firewall.cpl, and then press ENTER. In the Windows Firewall dialog box, click on (recommended), and then click OK.

  Also check out this link:

  Could not start the Windows Firewall service in Windows XP SP2:
  http://support.Microsoft.com/kb/920074

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756

• Problem not identified in the Windows Firewall settings

  Original title: Windows Firewall settings

  I went to allow an exception in my firewall settings, but I got a "problem of unidentified" wouldn't let me in.

  Hello

  You are welcome.

  Now, you know that when you have another firewall installed, Windows Firewall will automatically deactivate.

  I suggest you follow the link as reference below:

  For your information:

   

  Use the Windows Firewall:

   

  http://Windows.Microsoft.com/en-us/Windows-XP/help/networking/using-Windows-Firewall

   

   

  I hope this helps.

• Portege R830 - Windows does not start after I have install Comodo Firewall

  Good afternoon

  I bought today a Portege R830, and after the Windows configuration, the first program that I installed was the popular free Comodo Firewall. After that I restarted, Windows 7 unbootable. It would be stuck on the user login screen and I know it's a problem with the firewall because if I do a system restore to the restore point created by Setup of firewall, windows restarts.

  So I ask if there is any inconsistency between the firewall and software on the Toshiba. A that someone already had this problem? I tried to solve this problem throughout the day with no results. I even re-installed Windows 7 using the Toshiba Recovery and the problem persists. I really like the Comodo and I want this firewall on my laptop, but Windows does not just start!

  Any help would be apreciated.

  Hi jillefsky,.

  Have you disabled the Windows Firewall before you start with the installation of Comodo Firewall? As far as I know, Portege R830 is delivered with preinstalled McAfee security software and you must remove this program before you install other security tools.

  Generally this has nothing to do with Toshiba and it s advisable to contact Comodo directly. They may know about this so they can give you a proper answer.

  But I put t understand why this program is so important to you. Windows already has an internal firewall so that these programs are not necessary in my opinion. Just install a good antivirus like AntiVir and enable the automatic updates of Windows. All that s!

• I am trying to install a new printer, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I am trying to install a new printer, and to do that I know I have to disable firewall settings. I try, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I tried to go into Windows and change the settings of the firewall, but I get the same message.

  I also tried to run an update of the Windows security updates, but same message.

  I use Windows XP Professional Service Pack 3

  Any help would be greatly appreciated?

  Thank you

  M

  HI Maria/Winston.Not, trying to be coy but. I've never had close the firewall to load anything. It will be, or at least should invite you to make a choice to leave the program to run or not? Nevertheless.If you have windows activation hurt you firewall can reactivate manually without going through the bugs that you can not. If you click Start and choose the runtime application. Type cmd, and then press ENTER. When the command prompt box appears type "netsh winsock reset" without the quotes. He'll say firewall reactivated and ask for a reboot. Restart the computer and it will be active again. Just trying to help.

  Hi Winston/Hewlit,

  Thank you both for your advice.
  While waiting for your answers, I pushed all sorts of buttons and downloaded all kinds of programs in the hope that I could break the firewall (Hewlit the printer I tried to install says to disable the firewall to install the printer, and then turn it back on?).
  After a reboot, the message 'corrupt windows\system32 etc' file came and asked me to put in the original disc of Windows XP, I did not.
  Cut a long story short, I have now booked for a technician to come out as I'm totally lost.
  Thanks again for your help,
  M

• How to install the Windows Firewall?

  Original title: firewall of Windows XP.

  How to install the Windows Firewall?

  Hi LKayPeterson,

  Windows Firewall is a firewall integrated, based on the host, with State included in Windows.

  You can follow this link to activate the Windows Firewall:

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  Reference: Windows Firewall

  Hope the helps of information.

• Firewall Windows isn't the default firewall, that maybe it's because another firewall service is installed or because the Windows Firewall is disabled.

  Today, I ran a stack of Microsoft Fix it programs.

  It was performed several times and was not able to get the windows firewall the firewall by default or to recognize as being on.

  http://support.Microsoft.com/mats/windows_security_diagnostic/en-us

  Diagnose and automatically fix problems of Windows security
  Hide the last execution results
  Past performance results (Friday October 7, 2011 15:13:03)

  Windows Firewall is not the default firewall	Not fixed		Other Solutions
  Activate the anti-phishing filter	Checked		Other Solutions
  User Account Control (UAC) is turned off	Checked		Other Solutions
  Antivirus software	Checked		Other Solutions
  Status of antivirus software	Checked		Other Solutions

  Firewall Windows isn't the default firewall, that firewall Windows cannot be set as the default firewall service. This may be because another firewall service is installed or because the Windows Firewall is disabled.

  When you view the control panel > windows firewall, the firewall is enabled (recommended)

  Recently, I uninstalled McAfee Antivirus and installed Microsoft Security Essentials.

  Please indicate how to troubleshoot, and windows firewall to be the Firewall default or recognized under the name away.

  How to test the firewall to see if it is or it is not working properly?

  This problem has been resolved.

  The MSE has not recognized that the windows firewall was conducted.

  This problem has been resolved by running McAfee software removal followed by uninstallation tool and relocation of MSE.

  After reinstallation, I rebooted and the updated definitions.  He reported no problems with the Windows Firewall or the absence of firewall or at risk.

  I ran a full scan of MSE and we found no malware.

  For others who may have the MSE/firewall problem run followed by appropriate software removal tool to uninstall and reinstallation of MSE.  It takes time, but it worked.

• Windows Vista SP2 fails to install and Windows Firewall will not stay

  Hello, I have problems with Vista 64-bit, it will not install service pack 2 and Windows Firewall will not stay. I tried to manually enable ICF manually and it won't turn. It gave me error 6x9D. I ran several antivirus scans malware byte and pc cleaner pro 2012 and the issue has not been resolved. If I could get help would be much appreciated. Thank you

  Hello

  What do you use for security?

  If you are using an Internet Security Suite, it will have its own firewall and disables the default Windows Firewall.

  And you should have only one firewall to avoid problems related to the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You have not installed SP1?

  If so, try a direct download of SP2.

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• Windows update fails to download and install updates and cannot start defender and windows firewall.

  Original title: windows update fails problems to download and install the updates and windows firewall and defender will also not start?

  Windows update fails to download and install the updates and defender and windows firewall will not also start? What can I do?

  Hi Speete66,

  ·         You receive an error message or error code in Windows Update?

  ·         What happens when you try to start the windows firewall and windows defender? You receive an error message?

  ·         You have any other antivirus software or protection installed on the computer?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

   

  Method 2:  If the method above does not help, then you can reset Windows Update components and check.

  Reset Windows Update components.

  http://support.Microsoft.com/kb/971058

  You can also view the article mentioned for more information below:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know the results.

• Windows Firewall: I installed eset esmart security and it turned off my windows firewall

  I installed eset esmart security and he turned off my windows firewall and itself has a personal firewall, I would like to know what does enter the windows firewall too or not?

  Golden rule: one firewall for a computer.
  On this basis: abandon the Windows Firewall.

  t-4-2

• try to install Medal of Honor Airborne on 32-bit vista, and problems with the windows firewall starts do not.

  OK, im losing my mind.

  I bought a copy of airborne for my 32 bit vista system and found initially that I had to do a few tricks to install and play it like UN-installing ageia phys-x, it was simple enough. Well I have had since stopped playing it and would try to uninstall without result. I tried to fix it and using "C-cleaner.

  I went down some of the files, but I think that my registry is a little buggy so I tried blocking it with c cleaner, he sure found several errors and fixesd them.

  Well, I'm trying now to re - install MOHA and when I put the disc and click autorun the pre-start games window appears with the usual options, play, upgrade, site Web etc... I hit play, it does nothing. I tried to uninstall it from the disk and to halfway through she said "MOHA has not stopped the Installation Wizard prematurely try again later". I can't repair or uninstall or install. I read somewhere that it is a firewall with windows problem and if I run my firewall victory "which I have never on", this should work if the software is added to the 'green' list on the firewall.

  now I find that I can not get my firewall to start. I researched and found a few forums where people explained to the services command prompt and tried to 'start' several 'order' in there and firewall programs will not start giving me this error-windows cannot start service windows firewall. and the code of error-6801.

  I am a novice to tooling autour under the 'software' hood of PCs. I know a bit about the material and that's it. anyone has any ideas for me? otherwise I'm looking to another disorder vista install, I had a moment difficult, installation of the 1st hour and im not not looking forward to try it again...

  Thanks in advance, has soon - a fool lose his mind...

  Hi rocknerd,.

  You can try to download the Windows Installer Cleanup utility and try to remove the game, and then reinstall it.

  You can read the following article to download the Windows Installer Cleanup utility:

  http://support.Microsoft.com/kb/290301

  1. click on Start , then select all programs

  2. in all programs , click Windows Installer Cleanup; the Windows Installer Clean Up Utility window appears, listing the software currently installed on your computer.

  3. Select the game in the list, then click on Remove. If you have multiple files, delete all the.

  After you run the Windows Installer Cleanup utility try to re install the game and check if it works on your computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• can not turn on power windows firewall after the expiry of pre-installed McAfee

  Hi, I can't turn on the power windows firewall after the expiry of pre-installed McAfee, first issue of w / this time.

  New pc, Lenovo Win 7 Professional.

  Thank you; Ricky

  Did you uninstall McAfee?  If not do it first and then try to use the windows firewall.
  If still a problem, run the McAfee available here - cleaning tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

• If you install Oracle 11 g XE with active windows firewall APEX is dead

  My first installation of Oracle 11g XE was carried out with the active windows firewall.
  The database configuration was completed in bad condition because post install scripts did not stand because port 1521 has been locked.
  You got the "Get Started" link did not stand ok and browser got an error page.
  
  Allways install Oracle database with the non-active windows firewall.
  
  You can read in the documentation, installation...
  
  2.1.2 the Windows Firewall configuration
  
  If you plan to install Oracle Database XE on a computer running the Windows Firewall, which was introduced in Windows XP Service Pack 2 and Windows Server 2003 Service Pack 1, and then connect from another computer, verify that the firewall has not been configured to block all communication between the following inbound ports. These ports are the default ports that users Oracle Database XE.
  
  1521: oracle database listener
  2030: oracle Services for Microsoft Transaction Server
  8080: Transaction oracle HTTP Server
  
  but that apply to connect from another computer at your facility, not the installation process.
  I think that the documentation must contain "disable windows firewall before you try to install.

  Allways install Oracle database with the non-active windows firewall.

  Or add the listener and apex port numbers to the list of exceptions.