Re-install Windows Server, TMS

Similar Questions

• If we have 2012 window microsoft license server can then we able to install Windows server 2008

  Hello

  If we have the license microsoft windows server 2012 and I want to install Windows server 2008.

  Is this possible?

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• We license from microsoft windows server 2012 and I want to install Windows server 2008. Is this possible?

  Hello

  If we have the license microsoft windows server 2012 and I want to install Windows server 2008.

  Is this possible?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Cannot install Windows server 2012

  Cannot install Windows server 2012. Whenever I get * error

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Install Windows server 2008 r2 blue screens before

  I try to install windows server 2008 r2 on my system and it blue screens right after that the disc is loaded in the ram.  I don't not even to the selection of installation phase. It crashes just after the windows logo charge. IM receives the stop error 0x0000001e.

  my system is as follows
  Asus rog crosshair iv formula
  processor AMD 1100 t blacke edition x 6
  16 GB of ram
  ATI radeon hd 6950 graphics card
  and several discs hard digital western
  If someone has a possible solution to this problem would be great because I won't have a chance to make it work. Windows 7, it works, boots and install perfectly on this machine, but I need to put the server on it.

  Hello

  Your question would be more by experts Windows 7 IT Pro Installation, Setup, and deployment Forum. Check out the following link.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I am trying to install Windows Server 2008. When I get to the part where I should choose where the operating system is to be installed, it is blank.

  I am trying to install Windows Server 2008. When I get to the part where I should choose where the operating system is to be installed, it is blank. He told me 'No device found drivers. We see the SATA HDD in BIOS, and if I browse for the drivers, the driver is displayed. I used the command line packaged with the installer to format the drive, just to be sure. It is formatted in NTFS.

  original title: can not select the HARD drive to install on

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Im trying to install Windows Server 2003 R2 optional components

  Im trying to install Windows Server 2003 R2 optional components, but the installation wizard, says "the file 'clusnfs.exe' on Windows Server 2003 R2 is necessary". Can I download it online? I'm just trying to choose the optional component which would allow a computer MAC share files and the printer connected to the server.

  Hello

  As the problem you posted is related to the Windows Server operating system, I suggest that you post the question on the link provided below for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Problems installing Windows Server 2003 on a T61

  Hello:

  I had installed Windows Server 2008 on a T61 and it was an installation smoothly with minor hickups.

  But some of the other required packages Windows 2003 Server (they do not support Server 2008 yet!). So I started to install Windows Server 2003 and that's where I found a lot of questions:

  1. I had to change the SATA in compatibility mode (Windows installation has complained that no hard drive found).

  2. I installed Windows Server 2003.

  3. I can't get the wireless network adapter to work. I tried the drivers for Windows 2000/XP on the Lenovo site, but the system does not recognize the card.

  4. the Device Manager lists the devices unrecognizable following three:

  Network controller (must be the wireless card. Properties/Details says "PCI VEN_8086 & DEV... »)

  Controller memory PCI (properties/details says "PCI VEN_8086 & DEV... »)

  Unknown device (properties/details says "ACPI\ATM1200\4 & 374CCB25 & 0")

  5. when I insert a USB key, it is recognized and a new disk is assigned. However, I have an external USB drive and when I plug that in, the system does not recognize the drive.

  Help, please.

  Vincent

  Roz:

  Yes, the wireless works on my laptop. Send me a private message and I can send you the driver that worked.

  Vincent

• Hard drives not found when you try to install Windows Server 2008

  Hey guys and girls,

  I've spent the last 20 hours, trying to solve the problem of not being able to install windows server 2008 r2 on a new Dell server.

  My configuration is:

  Dell PowerEdge R310

  4 x 1 TB 7.2 K SATA HDD

  Controller Raid PERC H700

  I can't even install the drivers that I downloaded from the Dell support site because Windows Server 2008 Setup will not recognize them.  These factors include the Raid Controller, chipsets Intel, SATA etc.

  I used the settings default, all changed the Auto Off Ports and vica versa, I put the server in Raid and ATA mode with all the possibilities, but it will be will not detect any HD!

  Please help, as it is essential for my health, employment and mental health.

  Best regards

  Sami L.

  What OS?  What RAID controller?  How many discs?  The size?  RAID level?

  I can't assume that everything is the same, especially when you have a different system altogether which does not support the H700 (so the files would have been meaningless even if Dell had not broken links). :)

• Dell Power edge 2850 will not let me install windows server 2003

  Hello

  I tried to install windows server 2003 on a few servers, I received a few weeks back.  The RAID put a system in place and turned but when it tries to install WS he says that there are no hard drives.

  I tried to download "server Dell Power Edge update through bootable media / ISO ' but there is no download for a 2850.

  Also I tried to download this "Dell systems build and Update Utility" but most of the time it stops and says failed download...

  Hello

  Also visit this link

  This link is the user's guide.

  And another one

  I bought a 2950 on Ebay the month last but never had the intention on the installation of a Windows operating system, but I downloaded the ISO of DVD here file and installed without any problem they send you a key to save the operating system. I updated the bios after this and no problem. You never said how many hard drives you have, but make sure that you have two or more. So far, I've installed VMWare ESXi which was supported on 2950 but I settled with XenServer 6.5.0 and I 2003 server running as a virtual machine which works very well.

  I have a Dell XPS workstation I have recently reinstalled Windows 7 on it but I had only one drive is connected and the operating system could not see all of the hard drives. After that a second device and do not use raid on this machine, I was able to install Windows. I tried the ISO Live Dell 2850 version but it is not a. Which includes diagnostic tools. When you by a Dell there pre installed in a hidden partition on the disk utility, you can run, but it really isn't anything I know install that. Usually the F12 key will give you a list of items to boot from and if she isn't here the disk, it cannot run. The diagnostic utility that is.

• Problem installing Windows server 2003 on Poweredgeedge R510

  Hello

  I want to install Windows server 2003 R2 SP2 32 bit on R510 server.its gives me the error of the disc is not present... How ever I have successfully installed windows server 2008 R2 sp1 on the same server. Yet once again, I installed server 2008 that it has been installed without any error.

  Can help me please out.why his error on Windows server 2003.

  You will need the drivers of the controller to present at the F6 prompt.  They are native to the Server 2008 R2 DVD, but not in 2003.  Download this DVD ISO to help load the drivers of the controller for your server and load the operating system: http://downloads.dell.com/sysman/cdu_1.6_core_173_A01.iso

  Kind regards

• How to install windows server 2012 and windows 7 or 8 on the same computer

  Hi, I want to install windows 7 or 8 and on the same computer that I want to install windows server 2012 or 2008 I have not decide which one to buy again, and my question is, at the time where there was windows xp and windows me (x 9) for example, you must install first as millennial basic then install xp on another partition in my case I want to know is - it possible to do it without the virtual machine, and if this is the case, which windows must be installed first as the basis...

  Thanks a lot for taking time reading this, looking forward to your reply...

  You will need to ensure that the old version of Windows is installed first of all, in this case (Windows 7), then you can install Windows 8 or Windows Server 2012 after on logical partitions. Please see the following:

  See the following for how to dual boot Windows 7 and Windows 8 (the same principles can also apply to Windows 7 and Windows Server 2012)

  How dual boot Windows Vista/7 and Windows 8

  If you plan to have all three installed, make sure that configure you partitions in advance with ample space for all three.

  See:

  http://notebooks.com/2011/02/25/how-to-create-a-simple-partition-in-Windows-7-quick-tip/

• I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I'm not trying to run either on the USB key, I just need to know how to install from a USB key. I tried Multiboot, grub for DOS and other, but they do not seem to work :/

  I am going through a book that uses these two to form Microsoft MCITP: Server 2008 Administrator and if I could install these Via USB, this would save my records and a lot of hassle... basically just for convenience, as everything that I need will be on a stick * lol *.

  Otherwise, I'll have to use discs instead :)

  Take a look at this:

  http://www.Haiders.NET/post/installing-Windows-Server-2008-from-a-USB-Flash-pen-drive.aspx

  Like to make a bootable USB with WIndows 7, take a look to use the following:

  Download Windows 7 USB/DVD tool

  http://store.Microsoft.com/help/ISO-tool

• the UCS blade iscsi initialization cannot install windows server

  Hi all

  I have a problem when I try to install windows server 2008 in the storage of nexenta using iSCSI via ucs b-series, but his works well when I install ESXi 5.5. I can't find disk under windows server installation, and I see all the LUNS in ESXi what im create before nexenta storage and work when I install it.

  This vnic iSCSI Configuration:
  ----------------------------
  vnic_id: 13
  LINK_STATE: to the top

  Initiator Cfg:
  initiator_state: ISCSI_INITIATOR_READY
  initiator_error_code: ISCSI_BOOT_NIC_NO_ERROR
  VLAN: 0
  DHCP status: false
  IQN: test: iqn.2014 - 11.com.:8
  IP address: 192.168.1.59
  Subnet mask: 255.255.255.0
  Gateway: 192.168.1.5

  Cfg of target:
  Target the Idx: 0
  State: ISCSI_TARGET_READY
  State of PREV: ISCSI_TARGET_DISABLED
  Target error: ISCSI_TARGET_NO_ERROR
  IQN: iqn.2010 - 08.org.illumos:02:windowsboot
  IP address: 192.168.1.49
  Port: 3260
  Starting logical unit number: 6
  Ping statistics: success (986.646ms)

  Info session:
  session_id: 0
  host_number: 0
  bus_number: 0
  target_id: 0

  can anyone help me to solve this problem?

  Thanks in advance - Fabre

  ENIC / fnic driver must be installed. they are not part of any Windows operating system.

  they can be found in

  Home downloads
  Products
  Servers - unified Computing
  Series B UCS Blade Server Software
   
  Unified Computing System (UCS) Drivers - 2.2 (3)

  ISO image of drivers based on the UCS 
  UCS-bxxx - drivers. 2.2.3.iso

  Depending on the version of the UCS.

• Impossible to install windows server 2008 on virtual machine

  Hello

  I installed vmware 9 without any problems, but when I create a virtual machine and I want to install windows server 2008 on it, I see this error:

  This virtual machine is configured for 64-bit operating systems. However, the 64-bit mode is not possible.
  This host supports Intel VT - x, but Intel VT - x is disabled.
  Intel VT - x can be disabled if it has been disabled in the BIOS/firmware settings or host was not powered by bicycle since changing this setting.
  (1) check that the settings BIOS/firmware activate Intel VT - x and disable "trust execution."
  2 turn on the host if either of these BIOS/firmware settings have been changed.
  (3) turn on the host if you have not done since the installation of VMware Workstation.
  (4) update of the BIOS/firmware from the host to the latest version.
  For more information, see http://VMware.com/info?id=152 .

  What can I do?

  my laptop is vpccw27fx of sony and its configuration is

  Processor: inter (R) Core i5 M520 @2 cpu. 40 GHz 2.40 GHz

  RAM: 4G

  OS: Win7 64-bit

  I mention that the host BIOS/firmware is up to date, but I don't know how to check intel vt - x which is disable or enable. !

  Hello

  Restart your laptop and try to get into the BIOS, look for virtualization or VT - x and allow it