Re-installation of Windows of the Gateway Laptop

Similar Questions

• Finish the installation of Windows after the restoration is not possible

  Hi, I have a problem with my laptop.

  All of a sudden the keyboard reacted as the SHIFT key is down. When I insert a cd I don't have the name of the file under the icon and firefox lost my favorite pages. I ran antivirus scans, but nothing came. so I decided to do a system recovery. Now on the first page, I have to do next to complete the installation of windows, I click on the next button and it is clicked. I'm on the first page and my laptop is out of use. can you help me please?

  thanx

  Theo

  Hello

  Well, Stefan has suggested that the recovery CD is corrupt, but for me it s does not erase if you used a recovery CD or the Microsoft Windows CD.
  What did you use?

  I think that the recovery CD should be corrupted and it works without any problem.
  You format the HARD drive correctly? Otherwise, do it first and delete all partitions and try reinstalling the operating system.

• How do I reinstall my windows on the computer laptop hp2000

  My new laptop of hp2000 could not complete installation windows and can't reboot to reinstall windows. The comments I get is"windows could not complete the installation. To install windows on this computer, restart the installation

  Hello

  Please find the link given below might help you.

  Performing a recovery of HP (Windows 8) system

• Installation upgrade memory in the new laptop (E8730w)

  I just got my new laptop and was dismayed to see that I obviously have to install the 2 GB memory upgrade that I ordered.  When I'm ready to install it, I will contact HP technical support.  I'm interested in the big picture right now.  The laptop has installed Windows Xp and Vista, stored on the hard drive.  No matter if I use the new laptop for, say, from the user's manual before as I have added additional memory, or is it better not to use the laptop until I have all of the memory (2 GB original and 2 GB upgrade) in place.  I hope that this process will be no more complicated than to install an ethernet card in a years office 5 or 6.  Where can I get good screwdriver to open the module compartment memory?  From my experience, it is easy band, the head of a screw phillips, especially a small head, if there is no appropriate screwdriver.  I'd appreciate any idea on these issues.

  I don't think that no matter how long you use it before you install the memory. Regarding the screwdriver, I use a 41678 artisan to work on laptops with screws Phillips. It could cost $ 1.69 at any Sears and any tech tools for perhaps $15 will be a very similar small Phillips. You will know if you are stripping it, so stop everything. Memory installation is much easier than to put a PCI on a desk. Relax its all good.

• Installation of Windows 7 for their laptop computer Inspiron

  Hello... Someone at - it with Windows 8 / 8.1 laptop been able to install Windows 7? If so, would you care to share how? Thank you

  I'm tired now. I have try this installation of all possible ways and it can not be installed. I even went to try and see if my disc of windows 7 is originally by installing windows on my desktop pc, no problems with the slice. If the drive is good. Any ways I give up and I am returning this unit in MS and get a full refund. Now, I need to figure out how to do a factory reset. Thank you

• Error during installation of Windows 8 "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. »

  Original title: I can't access my pc please help!

  I recently download windows 8 ASSESSMENT and not this message keeps popping up whenever I turn on my pc.

  The computer restarted unexpectedly or encountered an unexpected
  error. Windows Setup cannot continue. To install Windows, click
  'OK' to restart the computer, and then restart the installation.

  I click OK and then it restarted my PC and came with The Windows 8 boot-up the top screen and then the same message keeps popping up.
  I need help really bad.

  Kind regards

  Darius Oisin Reyes

  Hi, Mary

  I'm using the Enterprise version that it froze during installation, so I waited around 9-10 Minutes still nothing
  so I started keys at random because I was waiting for a long time then restarted my PC and now I can't start my pc.

  >:-( >:-( >:-( >:-(

  Boot from the Windows 8 DVD or USB media that you created
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 8 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Non-accessible HARD drive is setup installation of Windows XP on my laptop

  Hello

  I have my 144TU Compaq Presario CQ40 (Intel C2D T5800, 160 GB of HDD, 2 GB of RAM).
  I have installed XP using a customized bootable XP to support SATA drivers using nLite.
  I use the same CD custom in this slot the entire post, so the problem of SATA not supported by XP is elimintated.
  I also setup a ubuntu installation I've ever used.
  I had a dual boot on my system with Windows XP Pro and Linux Ubuntu, last week I tried to delete the partitions of Ubuntu from Win XP computer management window. The system got hanged and I did a force close. When the computer reboots, the system hangs after a few minutes on the desktop. After several restarts (force) the OS is not boot at all. When I tried to do a formatting the OS drive and delete the Linux partitions using the XP bootable CD, the installation XP is unable to access the disk hard and don't show any of the logical drives as well as readers of Linux. The box which offers the list of the installed OS and their readers is to give a message that cannot access/mutual HARD drive.
  By mistake, I think I can have deleted the partition that had the top MBR. (I'm sure I didn't want to remove the disk from the operating system. I tried to remove the drive that was on display as unallocated (ubuntu leads usually shows as unallocated)).
  I tried the fixmbr command in the XP Recovery console, but it says that the drive we are trying to access is not available.
  I tried to use a mini Windows XP live CD (Hirens Bootable CD), which had an option to scan the HARD drive and find partitions.
  The HARD disk is scanned and my 2 XP partitions are located. It gives me the possibility to mount the partitions on the XP mini.
  I mounted the partitions and my 2 XP disks are intact. I think that there is a problem when accessing the HARD drive to the start-up level.
  Help, please.

  Thank you
  Gordon

  Ok...

  That's what I did.

  I was much concerned of my HARD drive to my data.

  So I unplugged my laptop HARD drive and carried it on the desk of a friend who had a SATA port.

  Plugged here and thank God it was detected, deleted all partitions and did a full format of the HARD drive.

  Fresh made 3 partitions and plugged the HARD drive into my laptop and installed WinXP which was a success.

  Kind regards

  Gordon

• installation of windows 8 in computer laptop recovery partition

  Hello

  Hello I have a HP Pavilion-g6 1301tx operating system Windows 7 Home Basic 64-bit consist of the recovery partition if I want to install windows 8 in my pc, so I can format the c drive and install it or I can upgrade the drive c

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You can format the 'C' drive or let Windows during installation, you can also be able to upgrade the disk hard if you want to.

  After the installation of Windows 8, please post (text only) of the "Hardware ID" Device Manager all the missing and/or unknown devices, as shown in the example below and we can direct you to the correct drivers.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• installation of windows on the home computer

  I'll make a new office with the shell of my hp pavilion p6707c. How to install windows on the computer?

  Well... sort of... Insert the Windows disk and restart the computer. Immediately, press the button to manually select the boot device. Select the CD/DVD and boot from the Windows DVD. Windows prompts you on the rest of the steps

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Installation of Windows on the Satellite C850 - 19(d)

  Hi all

  I hope someone can help me with the following story.

  My Toshiba laptop (type Satellite C850 - 19(d), type found elsewhere on the Toshiba site) is that it crashed and won t from hard disk initialization. Now, I wanted to try to use a Windows recovery USB 8.1. I did this on the Windows site, but now I understand that before you need a product key that I don't have.

  I then tried to make a Toshiba USB recovery (which I had already done so), but we don't know don't no where I can get this file for me.

  Can someone help me with this?

  Thanks, Jelmer

  Message was edited: assignment has been translated

  Download image recovery is unfortunately not possible.

  Everything you can do is buy the original image of recovery (recovery installation disc) Toshiba - https://backupmedia.toshiba.eu/landing.aspx

• Installation of Windows 8: the Windows installation needs administrative privileges to continue

  Try to install that my digital upgrade newly downloaded to Windows 8, my installation was arrested whith error message "windows installation needs administrative privileges to continue" and the closed facility.

  I am upgrading to Windows 7 64 bit and I use a laptop Asus N80VC.

  Right-click the Windows 8 Upgrade Wizard, and then click Run as administrator.

• Lightroom 5 - re - installation license existing to the new laptop

  Hello

  I recently had an accident with my laptop.  He is now dead.  I want to reinstall Lightroom 5 I bought for download, I have the license number.  I tried downloading via the free trial version, as suggested by the forum, but it forced me to download creative cloud and would not accept my license number, says that it is not that I have already.  My understanding is that you can install the program on two computers, as long as the two belong to the same person. I spent a few hours hacking away and am frustrated, a person can offer only some advice please.  Thanks in advance

  This seems to be a fairly frequent problem, it seems difficult to find non - CC for the download version and the CC version will not work with a license key no CC.

  So, here's what I think you need to do:

  1. Uninstall the CC version you have downloaded and installed.
  2. Go here http://www.adobe.com/downloads/updates.html
  3. Brings you to the download page for each country.  I know it says updates, but if you click on the version of Windows or Mac from LR is actually the entire program
  4. Download and follow the instructions for the installation and then enter your serial number when asked to.

  Autonomous LR does not need by turning off, you can install it on your new laptop with the old number without any problems.  I did it myself in the past that I moved from new PCs.  Should CC and CC before Photoshop disabling but not CC LR.

  Good luck!

• Installation of printer on the new laptop

  Buy HP Pavilion dv7. Unable to connect laptop printer all-in-one HP Officejet; have the drive... but the drive does not list Windows 7. What is my problem?

  gerriegayle45 wrote:
  

  Buy HP Pavilion dv7. Unable to connect laptop printer all-in-one HP Officejet; have the drive... but the drive does not list Windows 7. What is my problem?

  That because your CD is obsolete. You can get your driver here:

  Windows 7 32 bit - software & Driver Downloads - Officejet HP 5610xi all-in-one printer

  Windows 7 64 bit - software & Driver Downloads - Officejet HP 5610xi all-in-one printer

  I hope this helps!

  SeanS

• HP-15 f033wm: installation of windows 7 on computer laptop hp-15 f033wm.

  I can't find the good controller ethernet (PCI\VEN_10EC & DEV_8136 & SUBSYS_21DE103C & REV_08)
  for installing windows 7 on a computer laptop hp-15 f033wm.  I had to replace a bad hard drive, and I can't find any drivers appropriate for care in the 8.1 for windows operating system 7.  Help, please.

  Hello:

  Here is the link to the ethernet driver, you must...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp69625.exe

• No installer of Windows in the service list - Windows Update will not update

  Windows install is NOT in my list of service.  I can't install the 4.1 because there is no file for Vista which works.  Ms. Mr. Fix It, or anything that does not work. I can't run Windows Update. I am slot than Vista Ultimate 32 bit SP2.  Anyone have any ideas?

  Hi tabrams,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What fixit did you run?

  Follow these methods.

  Method 1: The analysis of file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 4: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 5: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  Reference: http://blogs.msdn.com/b/windows_installer_team/archive/2007/10/01/what-happened-to-windows-installer-4-1.aspx