Re: Is it possible to cancel an update of the BIOS?

Similar Questions

• Black screen persists after the recent update of the BIOS

  ENVY of HP TouchSmart M7-J010DX

  Hello

  I recently received an update through HP who instructed me to update my BIOS, I did. Now, after I turn on my machine, I don't see is a black screen. The power light is on and the fan seems to work (I can feel the warmth of the event). I have a pretty good feeling that this recent BIOS update may have done something that has caused this, and I would like to cancel the updates to the BIOS, if possible.

  I looked at and tried everything what I found on this page of the site of troubleshooting HP, except for the part of memory modules as I did of the latest changes to the memory modules. None of these suggestions helped with the black screen problem.

  The machine was reconditioned at the factory, and I've had it for about a month, but began to use it recently. The only changes I have made are on the HARD drive: I recently picked up a new SSD, added to the machine and makes the HARD drive, the machine came with a secondary drive (after wiping). Everything worked perfectly well until the update to the BIOS.

  I don't know what else I should do/try at this point.

  Any suggestions?

  Hello Mrstenter and thank you for your response.

  Unfortunately, I saw this page, you suggested before posting, tried and it doesn't work.

  As a matter of fact, I had to return to HP for repair the machine. Following the conversation with a technical support engineer, we agreed that the problem is the update of the BIOS HP pushed out.

  In short, the update of the BIOS HP pushed to brick my machine, and I had to send to HP to have restored it I couldn't find anything else to deal with the update of the BIOS on my own.

  I appreciate your attempt to address the issue, however. I hope your solution helps others, but he couldn't help me.

• The update of the BIOS for Satellite Pro M70 does support TPM?

  Hello

  There was an update of the bios that is specially designed for Vista... = bios-vista - 510win.zip on the Toshiba site...

  Although my Satellite Pro M70-113 did not support the default TPM module (BIOS verson 1.1, I always have this), is it possible that this update includes the TPM secure to enable bitlocker on vista?

  Can someone check and confirm please... :)

  And secondly, is configuration BIOS update for Windows utility saves the current state of the BIOS in some external as backup media, while if it happens with the process of update... the previous version can be restored in return?

  And a BIOS may be downgraded?

  Thank you.

  Hello

  (1.) I m not 100% sure but I think the new BIOS for the M70 does not support the TPM secure. I read somewhere that all BIOS versions that support TPM on Toshiba laptops cannot be updated by a common user, but the user must contact the authorized Toshiba service provider for these updates.
  That's why I think that Toshiba would not any BIOPS version by download issue if this BIOS would support the TPM.

  2.) now something about the second question:
  The new BIOS version replaces the old BIOS and BIOS States and to my knowledge it of not possible to save the settings for a backup more later.
  Generally, you must be careful with any update of the BIOS. Bad BIOS or bad update procedure may damage the jury!

• Satellite Pro A300D (PSAK1E) - update of the BIOS didn't

  Hello

  I recently tried an update of the bios after doing a clean install of windows 7 64-bit. The process is complete and the phone has rebooted. In the end, the laptop could not start and just displays a black screen.

  I tried some of the methods on the internet using recovery from the crisis on a usb key, but have had no success

  I'm not so im using the wrong combination of Fn + B etc or what but could really do with some tips

  Thanks in advance

  Hello

  I put t think there is much you can do if the BIOS update failure. Usually in this case the ROM module needs to be reflashed, but this is possible only from an authorized service provider.

  In my opinion, you should contact the guy and ask for help. I m sure they can help you solve this problem. :)

• Satellite A210-15Y crashed during the update of the bios

  The worst case has happened and the laptop computer crashed during an update of the bios. I know that there is the possibility to repait the bios with a tool of recovery from crisis. For this purpose you have to press 2 keys (in most cases FN + B or Win + B) during the connection of the supply cable and the next start. I tried many books, but nothing happened. Can someone tell me the keys on which I have to press a 210 - 15Y satellite and maybe where I can get an image of cd of the tool of the crisis, because the laptop does not have a floppydrive?

  Hello

  As far as I know that the BIOS crisis procedure may be crazy by a technician of the ASP.
  You can not download a version of traditional BIOS who can update the BIOS from a USB FDD floppy.
  You can download only focused on the victory of the BIOS that can be run so that windows operating system is running.

  In my opinion, you should get in touch with a local ASP!

• Satellite Pro L40 - after I start the update of the BIOS, nothing happens

  I'm trying to update my BIOS version 2.00 - WIN for Satellite Pro L40 PSL4BE.
  My OS is Vista 64 bit.

  I downloaded the file and run the .exe but nothing happens.

  I also tried to copy the files on a diskette and start with a floppy disk, however, I get an error message saying to remove the diskette in the drive on startup. Any help please?

  First update the BIOS for Satellite Pro L40 is based on Windows it of possible to update in DOS mode.

  Also, I checked the Web from Toshiba site and I can only find a BIOS for Windows XP and Windows Vista 32-bit.
  It seems that the update of the BIOS is not supported for Vista 64-bit.

  If you want to update, you need to change to 32 bit Vista or XP. Then you can update the BIOS.
  Don t forget this version 2.00 - WIN is for Vista 32 bit and 5.50 - WIN XP.

• Satellite P200 - update of the BIOS under Vista x 64

  Hello

  I downloaded the update of the BIOS on the toshiba site (1.70 WIN). I can't run on Vista x 64.

  Is it possible to update my BIOS?

  Thank you very much
  Simon.

  Hello!

  > I have trouble running as she complains the PHLASHNT.sys driver.
  Sorry, but I don't understand what you mean. It's not clear to me.

  I downloaded the package to update the BIOS for your Satellite P200 (PSPBGE). It contains the setup.exe file and the file ROM.
  Extract the two files to a folder and run the installer as administrator.

  Good bye

• Updates to the BIOS EliteBook

  Is there a HP tool that allows you to update the BIOS and set a BIOS password silently and remotely?  I am wanting to be able to update the BIOS in an imaging process.

  Thank you

  1. Download the Setup BIOS HP utility of: http://www8.hp.com/us/en/ads/clientmanagement/drivers-bios.html
  2. Download your system BIOS updates from HP. extract the BIOS updates on in the SWSetup folder. You can do this by running the installer until the extraction stage, and then cancel the real installation.
  3. Copy the BIOS updates in appropriate system model files, including the HP BIOS Configuration Utility EXE
  4. Use a similar .bat file in the below to apply the update of the BIOS through a sequence of tasks SCCM silently (or the one you use for Image/build machines with). Note that for SCCM, you need to remove the reboot after that the BIOS updated by adding - r at the command line. Instead, add a reboot target machine step in the task sequence after the update of the BIOS. Otherwise, the system will rebot in windows and the task sequence Calera.

  -BAT example HP BIOS update file-

  REM Installer copy to C:\Windows\Temp, and then install. s = silent - r = remove the reboot

  MD "% SYSTEMDRIVE%\Windows\Temp\820BIOSUpd".

  xcopy "%~dp0820\*.*" "% SYSTEMDRIVE%\Windows\Temp\820BIOSUpd" /E /Y

  CD "% SYSTEMDRIVE%\Windows\Temp\820BIOSUpd".

  HPBIOSUPDREC.exe s - r

  output/b 0

  -----------------------------------------------------------------

  Good luck

• update of the bios under windows 8.1

  I am trying to install a new graphics card (gtx750ti) than ATI Radeon HD 4600 Series (Microsoft Corporation - WDDM v1.1) and have updated to 750w power supply. Turn on the pc and no video, the pc is running but nothing on the monitor. Map vid tested on another machine it works fine, they suggested the bios update. I hesitate to update because there is no udate windows 8.1, any suggestions?

  Name of the Microsoft Windows OS 8.1 Pro with Media Center
  Version 6.3.9600 Build 9600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name ROBERT-PC
  System manufacturer HP-Pavilion
  A6652f model FK574AA-A2L system
  System Type x 64-based PC
  SKU FK574AA #A2L system
  Processor Intel (r) Core (TM) 2 Quad CPU Q8200-2.33 GHz, 2333 Mhz, 4 Lossnay, 4 logical processors
  BIOS Version/Date American Megatrends Inc. 5.43, 2009-09-10
  SMBIOS 2.5 version
  Embedded Controller Version 255.255
  BIOS Legacy Mode
  Baseboard manufacturer PEGATRON CORPORATION
  Model baseboard is not available
  Name of plinth base
  Role of platform office
  State of secure boot not supported
  PCR7 Configuration binding is not Possible
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.3.9600.17031".
  User name Robert-PC\ROBERT-PC\Robert
  Eastern Daylight Time zone
  Physical memory (RAM) installed 4.00 GB
  Total physical memory 4.00 GB
  Available physical memory 1.95 GB
  Total virtual memory 8.00 GB
  5.72 GB available virtual memory
  Page file space 4.00 GB
  Paging file C:\pagefile.sys
  Hyper-V - VM Monitor Mode Extensions not
  Hyper-V - second level address translation Extensions No.
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  update of the bios under windows 8.1

• Remote update of the BIOS r.620 with Ubuntu

  Anyone know if it is possible to update the bios of a r.620 (with iDrac Express) on Ubuntu 12.04.3 remote.

  I have problems of the E5-2630 Intel processor performance and read that it could be solved in update of the bios to the latest version:

  BIOS_T2RVC_LN_2.1.3.BIN

  I tried to run the bin file

  But I had lines like:

  . / BIOS_T2RVC_LN_2.1.3.BIN: 165:. / BIOS_T2RVC_LN_2.1.3.BIN: deal: not found
  . / BIOS_T2RVC_LN_2.1.3.BIN: 166:. / BIOS_T2RVC_LN_2.1.3.BIN: deal: not found
  . / BIOS_T2RVC_LN_2.1.3.BIN: 167:. / BIOS_T2RVC_LN_2.1.3.BIN: deal: not found
  . / BIOS_T2RVC_LN_2.1.3.BIN: 168:. / BIOS_T2RVC_LN_2.1.3.BIN: deal: not found
  . / BIOS_T2RVC_LN_2.1.3.BIN: 169:. / BIOS_T2RVC_LN_2.1.3.BIN: deal: not found
  . / BIOS_T2RVC_LN_2.1.3.BIN: 170:. / BIOS_T2RVC_LN_2.1.3.BIN: deal: not found
  . / BIOS_T2RVC_LN_2.1.3.BIN: 200:. / BIOS_T2RVC_LN_2.1.3.BIN: deal: not found
  . / BIOS_T2RVC_LN_2.1.3.BIN: 684:. / BIOS_T2RVC_LN_2.1.3.BIN: syntax error: "(" unexpected

  Kind regards
  Marcel

  Hello Marcel

  I don't think that we create updates designed to work under Ubuntu. The easiest way for you to make the updates would be through the iDRAC. Connect to the web interface via the IP address of the iDRAC and choose the option to update and restore in the left column.

  You can run windows 32 bit Dell Update Packages (DUP) from there. You can update THE system BIOS, firmware, PERC, iDRAC firmware and most other firmware the iDRAC using this method. Is the independent operating system, is a great way to make updates when you run Ubuntu, ESXi or other OS generally don't write us updates for.

  Thank you

• Spectrum of HP x 360 (Lake of set): error during the update of the Bios (c2-error: the region is write-protected)

  Just got the new spectrum x 360 with processor i7 to set Lake.  I love most everything on it, but it's hot in the upper left corner, and temperatures are in the order of 80-90 during a normal charge.  Research of solutions possible and a common solution seems to ensure that the Bios is updated.

  HP Wizard jumped by chance in a message on a Bios updated available.  Perfect timing, so I thought.  Update downloaded BIOS ok, but during the installation, I got the error c2-error message: region is write protected.

  Reflection on the update of the Bios?  I know that one of the recommendations is not not to date Bios at least that something does not work.  Everything seems to work fine, but I think I should update it Bios to see if it solves the problem of heat.  Thoughts on that?

  Thank you.

  Thank you.   It's the strangest thing.  Despite having the error message above and the Bios update process pretending stops, when I rebooted hours later, the Bios updated.  I checked, and it is now the latest version.

  Guess my problem is solved.

• Username and password required for the update of the BIOS download?

  Hi guys,.

  Hoping someone could help.

  Yesterday, I received my Mini of click on Satellite and I currently support after discovering there is a certain drivers are installed before you can actually use the thing.

  While the laptop is in charge, I try to download the update of the BIOS on my laptop, so I can transfer it to my laptop once it is fully charged... I did have problems downloading tastes of the driver wifi for example but when I try to download the BIOS update opens a new and tab where Toshiba ask me a username and password? I tried to enter my username and password I used to register on this site and I also tried using another computer to download it, but without success. It is worth noting that I could partially download the file last night but then it failed to half way through download?

  Any suggestions?

  Thank you very much

  Liam

  Hi all

  I am eager to read an answer that helps on these issues...

• The update of the BIOS on Satellite Pro U400?

  I have a Toshiba Satellite Pro U400 (PSU41E) running Windows 7 x 64 and I try to update the BIOS to version 4.70 to 4.00.

  Whenever I try to do it from Windows using WinPhlash which comes with the download on the Toshiba site it seems to freeze when you try to Flash the new BIOS.
  I connected as the local administrator, tried to use other programs flash and even tried to do from a USB flash drive with no luck.

  Can someone please help me and explain how do I update the BIOS?

  Hello

  > tried to use other flash programs
  Never use other flash programs! In the worst case, you could damage the ROM module and then it must be replaced. Use only the program flash Toshiba that is tested and designed for laptop and the version of the BIOS.

  The update of the BIOS program is also designed for Windows, it s a Windows Update program.

  Satellite Pro U400 wasn t comes with Windows 7 so I guess you did your own installation. Value added package is required for the update of the BIOS program and can be downloaded on the European driver of Toshiba download page where is your laptop model:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Tecra M10 - update of the BIOS says "this computer is not supported.

  Recently refurbished a M10 - 10I to reinstall the operating system. WinXP install at all so I try to update the BIOS as it seems quite old (V1.5). Most recent version (and is available) for this machine seems to be V3.0. Download and try to run the file "P0065V300" and get the message:

  Package for the TOSHIBA BIOS ver.3.3.0
  This computer is not supported

  What can I do? Its supposed to be for this model!

  Also, prefer a version of boot drive, but hey, I can use a version of Windows, assuming that it runs on Win7.

  Hello

  Tecra M10 - 10I belongs to the series of PTMB1E and according to the page of the Toshiba UE driver, BIOS v3.00 - WIN is the latest BIOS version which is available for this model.

  The BIOS update requires a few additional tools Toshiba as VAP (additional package for Win 7)

  If this driver isn't installed, the update of the BIOS would not work.

• Need to check the update of the BIOS Portege R830 without Intel TXT

  Hello Forum,

  I have exactly the same problem as described here 2 years ago:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65519

  I need to update my BIOS, but I can't because the update of the BIOS told me that the Intel TXT is enabled.
  Unfortunately I can not disable it in my bios. Its just not selectable. The 'cursor' jumping just above him.
  I can only 'hide' which does not help.
  I have the same thing for the VT - x and VT - d setting in the BIOS. Is not selectable or editable as well.

  TPM is not active if...
  I installed after infineon and he tells me I need to enable the TPM in the bios to use. :-(

  I have a very old Bios Version 3.1 and I read in the changelog that there are a lot of TPM in v 3.4 and 3.5 related changes...

  In any case...
  A P007Dv360A_EC77V140.zip file has been transferred to 2shared.com who fixed it at the time, a user named Paolo30.
  Unfortunately, that this file has been deleted on 2shared.com

  can someone please provide this file (or an update of the bios later) which resolves this issue?
  Thanks in advance.

  Portégé R830 - 10 p belongs to the series of PT321 if you need the BIOS for Portege R830 PT321

  You can download older versions of pages driver Toshiba BIOS.
  For example: http://www.toshiba-asia.com/sg/support/drivers

  On this page of Toshiba Asia I could find all the BIOS for this Portege model.