Re: Replacement of battery Qosmio G30-161

Similar Questions

• Qosmio G30-161: cannot receive the signals of TV in MCE

  I recently bought the Qosmio G30-161 and have problems with watching TV via the media library. I get an error message that there is no signal. However another TV tuner I installed separately I'm not having any problems.

  I read somewhere that this could be solved by installing the last disc of tv tuner. If anyone can confirm this? If Yes, when I try to download the player from Toshiba online support, which comes in a file zip, after extracting it I don't see an option to install it.

  Thank you

  The second TV tuner installed on your Qosmio?
  Have you tested to receive TV signals without the second tuner but only with Qosmio internal tuner?

• How can I find out what kind of RAM my Qosmio G30-161 has?

  I want to add more ram to my qosmio G30-161. I couldn't find any info on what type of ram or max ram that can be added to the manual. I read once but can't remember wherever it is max 4G with 2g of each... DDR2.

  I use windows media center as operating system-32 b.

  My question is where you can find information on the extension of the memory? so that I can buy good ram

  I found some info on Qosmio G30-161 and RAM upgrade.

  Here we go:
  Your model of laptop can be upgraded with 4 GB RAM max. So, you can use 2 x 2 GB RAM.
  According to Toshiba, you use PA3513U-1M2G (DDR2-667 2 GB Memory Kit).

• Qosmio G30-161: can not see the second HDD in my computer

  Hello
  can someone tell me, that I rebooted reboot DVD in my laptop to restore all of the windows in the normal settings
  as I got when I bought the laptop.
  but for some reason when I go into my computer I do not see the 2nd HDD.

  There is only one disk c it but not the other hard drive. I need to change the settings of smoke to see the 2nd hard drive?

  Hello

  Well, the Qosmio G30-161 should be delivered with two hard drives of 60 GB.
  I guess you can see a single HARD disk due to the RAID settings.
  The unit supports RAID technology.
  I think that the RAID is on the mirror. This means that the data is duplicated on both disks.
  Generally, it should be possible to disable the RAID.
  Check the folder utilities Toshiba.

  PS: It is possible that you will lose data after changing the RAID settings. Be careful.

• Qosmio G30-161 PQG30E: HD-DVD, it does not work

  HI -.

  I have the specifications of the models below, and when I try to use a HD-DVD it does not work. I followed another thread re HD DVD but it seemed to apply only to Windows Vista, but as you can see below I just Windows XP but apparently the HD ready display.

  Any ideas? Thank you, Robin

  Qosmio G30-161
  Part number: PQG30E-024024EN
  Main features
  -Technology Intel Centrino Duo Mobile T2300 to Intel Core Duo processor
  -Genuine Windows XP Media Center Edition
  -120 (60 + 60) GB HDD
  -1 024 (512 + 512) MB of RAM DDR2 (533 MHz)
  -17 "screen Toshiba TruBrite WXGA + TFT
  -Drive DVD Super Multi (Double Layer)

  Sorry but I don't understand your problem. You wrote just HD-DVD, it does not work. What exactly do you mean? The optical disk drive does not work or you can't watch HD-DVD movies?

• Qosmio G30-161: how to install XP or where to find the restore CD?

  In my other post (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=29959&tstart=0) I asked if anyone had a solution to my problem, I thought at that time was RAID configuration. It turns out that it is my CD is corrupt.

  So now I need a new Qosmio G30 - 161 XP MCE install CD. Now, I've heard that there are a few programs, Fx. nLite, which can put drivers into XP installation. Is this true? I have a Win XP Prof instal cd.

  So here is my final questions (prioritized :))):

  1. How can I make my own CD for Win Xp MCE or Pro install?
  2. what drivers need to be included in the cd?
  3 should. what program I use?
  ______________________________________________

  4. If it is not possible for me to create my own CD, where can I buy one that works with my Qosmio G30 - 161?

  A response is much appreciated and wanted :) Please help me out here. I thank very you much in advance!

  Hello

  Yes, you can use the freeware software nLite to build your own windows CD and include the various drivers.

  With regard to the point:

  (1) I think you should google for nLite, because much useful documentation and instruction how to use the program nLite.
  (2) If your laptop supports the RAID drive I would recommend including only the RAID driver. Other drivers, you can install after the installation of Windows operating system
  (3) nLite is ok
  (4) you can order the new collection of EPA, which is responsible for your country.

  Best regards

• Problem ports USB 2 with a Qosmio G30-161

  I have a Qosmio G30-161. You need ports 4xUSB2.
  Whenever I connect a USB2 device I get a pop up message saying he would run faster in a USB2 port.
  This happens with all devices in all ports.
  I checked my device manager, which shows the 5 host controller and Hub 4 x USB root.

  Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27 8
  Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27 9
  Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
  Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
  Intel (r) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
  USB root hub
  USB root hub
  USB root hub
  USB root hub

  I tried to manually edit the other host of the Enhanced controller - 27CC.
  All I get is an error that the device cannot start.

  Any help to solve this problem would be much appreciated...

  Thank you
  Imran

  Hi Imran

  Something like that shouldn't happen, especially if your laptop has the factory settings. One of my friends has the same laptop and it works like a rocket. No problem at all. It does not mater what external device is connected to one of the USB ports, device will be recognized correctly and the data transfer is very good.

  In your case, it will be interesting to know if your laptop has factory settings (preinstalled with recovery media) or your own installation of the OS. Maybe this info can help us understand what is happening exactly.

• Need help with my Toshiba remote control and receiver for Qosmio G30 161

  Hi all

  I have a Toshiba Qosmio G30-161 and with her, I have a Toshiba remote and a Toshiba remote control receiver, this is the first time that I used it (tried of that is), my problem is that the remote control does not work on the computer, when I press keys on the computer program does nothing.

  I installed four new AA batteries and the remote works fine its send signals to the receiver, the receiver of the remote control as a red light detection is displayed whenever you press a button and with regard to the computer, I checked the drivers and the USB is off the hook as a remote E-reception receiver which I checked with Toshiba and which is correct , so overall the remote control works, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but was still nothing done to. I talked about support and assistance of Toshiba, and the end result is that they are not sure what is the problem. Can anyone help I need the remote control for the slide shows for clients like ja? m a photographer.

  Also to confirm that I'm under addition of Windows XP MCE.

  Anthony Worlock

  Hello

  This remote will work, if you use it without any special drivers and special software, only in the Media Center.

  But if you install stuff like [WinLirc | winlirc.sourceforge .net] then you should be able to get some functions for your presentation.

  Please try this tool and check if it works.

  By the way: if I were you I would first read the manual and the WinLirc FAQ before you start because it s a little bit tricky to manage the program. :) (Too many parameters: D)

  Welcome them

• Replacement adapter for Qosmio G30-163

  Hi, I inquire about part No. PA3237E-3ACA (adapter for my Qosmio G30-163). Due to damage I require a replacement but am unable to find this component on your Irish site. Can you direct me to the component, or an equivalent as I required emergency. (go away)

  Any help appreciated

  If you don't have a lot of time, please contact the partner in your country. Maybe they can order one for you in a very short time.

  Addresses and phone numbers, which you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good luck!

• Qosmio G30 - 161 - recovery disk does not work

  Hello world

  I need help to understand what happened with my laptop G30-161

  The last time I tried to reinstall the product recovery things was wrong.
  The time where computer supposed to install windows then a blue display screen and stops the process and I get a black screen where there are three choices: start windows normally, or with the command prompt or networking safe mode.
  When I tried safe mode: I get a message that windows is not yet installed!

  When choose ok then the windows install see the screed for a few seconds and then the blue screen appears and disappears a few seconds and the windows on the screen appears as if the system will be installed, and after a few seconds, I get the same - back screen with the choice of the tree again.

  I tried several times to use the product recovery disc and enter in the same circle.

  great wishes to you all

  Hello

  > I have tried several times to use the product recovery disc and I enter the same circle.
  Are you sure you have booted from the recovery disk?
  This seems strange to me that you get the back same screen (start windows normally, or with the command prompt or networking safe mode) when you start drive recovery.
  These three options are displayed only if the laptop would be started from HARD drive.
  So please try to boot from the CD again.
  Insert the CD, turn on the unit, press F12, choose ODD as a source of start-up and follow the instructions on the screen.

  If this is not possible, then I would recommend the HARD drive.
  I recommend Drive Fitness Test. This software freeware s (google).

  Perhaps something went wrong with the HARD drive.

• Qosmio G30-161: Cable for HDMI output on DVI input

  I have my G30-161 "HDMI" output as well as the analog out. I began to find a cable to connect it to the DVI to a TFT monitor, but seem to have trouble identifying which is the end "HDMI" cable connection. Does anyone know the formal classification of HDMI connector (or a UK power cable) I can be sure I buy the right cable?

  Thank you very much

  Phil

  Hello Phil

  Put? HDMI-DVI adapter? as keywords on Google and you'll find enough online shops where you can order one.

• Qosmio G30 - 161 corrupt brilliant graphics in games

  I have a G30-161. Whenever I load 'Far Cry' I see graphic corrupt brilliant. I can fix it by changing the screen resolution, and then come back, but I don't know why it happens or is it a fault.

  I also saw it in Half Life 2: Episode that they produce only when I get back to the desktop and then switched back to the game - seems to be something to do with the refreshing screen - can anyone help?

  (I'm running the latest Toshiba driver card chart but it is from February and drivers Nvidia settles more recently)

  Hello

  You can try the driver for the HD DVD version of the G30. I think they have the same graphics chip.
  The HD-DVD version of the G30 (PQG31E-XXXXX) has a newer version of the driver.

  BR

  Tom

• Qosmio G30-161 does not start - NTDLR "file is missing

  Hi all

  I have a G30-161 double HDD (in Raid 1) which no longer starts...
  He just gives the message "file NTDLR is missing" and is followed by a prompt to restart the computer in which the same error will appear again.

  I got this laptop for my son to fix (lucky me :(!)

  Things, I've looked at so far:

  -Check the BIOS to see if the disks are configured properly - BIOS indicates the two hard drives installed, online and in RAID 1
  -J' had an installation of Windows XP by hand disc then tried to see if it would boot from a CD. He started on the CD ok, but the process Windows Recovery Console/install said he couldn't find any hard drives. Find an Acronis True Image boot disk (using linux I think), once again the started program end, but don't have it no hard drives installed.
  - So with no HD not reports I took one for a test. With disk 2 removed, in an attempt to start the system reports "RAID 1 is GRADIENT" then follows with "NTDLR file is missing. So this tells me that SW RAID working probably and he knows that a HD has been removed.
  All the patches I've read on the PC forums involve the use of the XP Recovery CD or some, but it won't work because the system thinks there are no disc when it starts. We have no ' have a Toshiba Recovery disk for the machine.

  Someone at - he saw the problem above, knows a fix?
  Can I purchase a G30-161 recovery CD anywhere?

  Any help appreciated. ...

  Thank you
  Steve

  Hello

  Looks like your drive is loked I found a thread in forum about the same error message and the user mikeptag posted a solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=58&ThreadId=24051

  I didn't test this procedure and, therefore, I don't know m if it can help you or not, but in my opinion it's worth to try

  Check this box and post your results

  Good bye

• Need help with the installation of Vista on a Qosmio G30-161

  Hello

  I want to install vista on the G30-161 but don't have a clue about complex applications.

  I download drivers vista first on the toshiba site? Would I be able to upgrade to vista xp or do I have to install the full version of vista?

  Thank you

  Indeed many applications is not compatible with the Vista at the moment!
  I would recommend the Vista installed on one separately on a second partition and let the XP on the first partition C.
  In this case, you can use the two s OS, XP and Vista!

  Take a look at the Toshiba driver page. There are some drivers Vista for G30.

• Qosmio G30-161: how to put in double screen under Vista

  Hello, I've tried loads but do not get the case, I can get the other screen to work by stopping and starting the system but I only ever get a screen at work is simple step by steb guides for dual screen my work machine is a G30-161 under Vista Ultimate.

  Thank you very much
  Michael

  Hello

  Have you used the key FN + F5, this combination of keys control the Toshiba screen utility switch device use as that buttons together and you should be able to get the different display options.