Re: Satellite A100 - after reinstalling Windows, I can't set up the WLAN connection

Similar Questions

• Satellite A50 432: after reinstalling Windows I can't do its job properly

  I have a problem with the laptop A50-432 of unknown source without recovery CD when Windows XP has been reinstalled and after re-installation, I can no longer do its job properly.

  I have installed sound drivers SigmaTel C-Major Audio-sa50-xp - 614013835.zip:

  27/05/04, its pilot, Sigma, Windows XP, 6.14.01.3835, World Wide

  and what I get is noise from great height and whistle of the right speaker only. If I set an audio file for playback I can rarely hear good audio clean for a second or less and then he returned to his noises and whistles. If I connect the headphones to use instead of the speakers, the effect is the same.

  I followed the installation order and then reinstalled the drivers several times with no luck for his work. Audio worked fine before reinstalling Windows. I have no problem with the rest of the component and I also tried to disable the other drivers (for LAN, IEEE 1394, 802.11, etc.) without effect.

  Does anyone have ideas how I can fix this problem?

  Thank you

  Roman salute

  This problem occurs when you use the headset?

• After new OS installation can not see all the devices connected on satellite

  I recently reformatted the computer because I had a lot of problems, after doing so I tried to connect to the internet, on that I just plugged the ethernet cable, the light on the modem was flashing and I opened the network connections, but the network device was not there. e.g. connection to the LAN 1, etc.

  I also have another problem. I opened the Device Manager and could not see any of the connected devices.
  can anyone help?

  HI Kamal,

  If you have reinstalled just your system from the recovery CD then you will also need to re - install one of your devices (including your Internet connections) installation CD that came with them.

  The recovery CD contain only the Windows base operating system, as well as the software provided to Toshiba and to my knowledge, this does not include the ISP software or connections.

  Kind regards

• Satellite L25 - after that Windows update is unable to use the Wi - Fi button

  I have a S-1193 Satellite L25, caught a virus, and after a windows update, cannot use wi - fi on the front button.

  What I have to do is disable the adapter, turn it on, then re-boot.
  If I turned off the computer, I di everything again.

  This will make the button work? Or is there a setting that is always on?

  Hello

  > after a windows update, cannot use wi - fi on the front button
  Do you mean the button that launches Internet Explorer?

  According to your message the laptop doesn't connect to the WLan automatically and you will need to connect it manual to get the job of WLan.
  Is this right?

  I put t know how you have connected the laptop to your router, but usually, if you own Windows WLan zero configuration then you should make sure that the parameters to a called + connect when this network is in range. +

  Welcome them

• After reinstalled Windows 7, try to put in the product key, but will not accept

  My computer crashed so I had to reinstall Windows 7.  I do not have a disk so I downloaded it on the site. She asked to authenticate, and when I put my key from the bottom of my computer. He won't accept it.  Is there a reason why?

  Contact the manufacturer of your computer and request a set of disks of system restore or recovery plant.  They usually them will send you at a minimal cost.  This version of Windows is guaranteed to match that originally installed and should not a key to work properly.

• Windows Firewall can be set as the default

  I am running Windows XP - SP3 and Windows Firewall need is running in order to install the latest version of Nero, but after trying all the things offered by Google one not able to make it work.  The result of Microsoft FixIt is the following - "firewall Windows cannot be set as the default firewall.  This problem can occur because of an existing group policy... »

  Can someone tell me how to fix this, please?

  the link worked fine and our web filter now works, this helped a lot thank you very much.

• How can you recover files, folders, software and drivers after reinstalling windows xp family?

  original title: How can you recover files, folders, software and drivers after reinstalling windows xp family? Please help, I've lost everything!

  When the update Norton Internet Security 2009 to 2011 on reboot, windows cannot open.

  Root\systems32\hal.dll Windows prevented windows from opening.  My machine in a Dell dimension 8300.

  On a Dell website, I found a method of recovery if you can reinstall windows xp from cd.  I was able to do it, but lost all my files.  How can I recover all my fortune, images, software, drivers, etc.?  There must be a way to extract this information from the hard drive.  Any help is the material and can save my marriage!  Thank you.

  Hi MarkS_02127,

  Since you've reinstalled windows, you will need to re - install applications once again, you will be lucky (if you format the drive) data on your computer. You remember that location, it was in my documents? If yes it just open C:\Documents and settings and locate your old username, you will find your old desktop, Favorites and Documents.

  I hope this helps.

• Satellite A100-068 - for Windows Vista recovery disk

  Hello.

  I have a Satellite A100-068 where Windows broke down. When I turn it on it says configuration update 3 of 3. After awhile it will restart and returns with the same message. It is not possible to boot into safe mode. (Same problem). I searched the net for a concludes but only found that I have to reinstall windows (Vista Home premeum). My problem is that I Don t equipped of a Medea. The PC came with windows pre-installed, and there was no partition of medea or recovery disk recovery.

  Is it possible to buy DVDs that will work with the OEM installation (in Danish) license, or I can get a toshiba restore disk or?

  Please help me out here.

  Hey,.

  Normally, you need to create this recovery disc yourself using pre-installed recovery disc creator, but I think that now it s too late because Windows doesn't start anymore.

  But you can order the CD here:
  https://backupmedia.Toshiba.EU/landing.aspx

  If you can t order it, ask an authorized service provider. Alternative use a normal disc of Microsoft and the drivers of Toshiba page.

• No sound after reinstalling windows xp

  I formatted my hard drive and reinstalled Windows XP Professional.  I installed the SP3 also.  Except that now it does not even record that I have a sound card.  Reinstall, I used with sound edge and it worked perfectly, but now in Device manager there is an exclamation mark next to "Audio device on high definition audio bus." After running dxdiag, it says that there is no sound card.  Any help would be appreciated.

  After having reinstalled XP did you download and install the audio drivers?

  Download drivers

  Visit the manufacturer's Web site and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver (s) and follow the instructions to install - the process may vary with different manufacturers, so I can't give you exact directions.

• HP Dm1 3025DX network controller drivers are not installed after reinstalling windows

  Hello

  I have a laptop HP Dm1-3025DX Windows 7 home premium 64 GB and after reinstall windows from the network controller and Ethernet controller both say the drivers for the device are not installed. I can't understand how to solve this problem or download either. I don't have access to the internet on this computer so I use another computer for this post, and I'll have to use this computer to download drivers also. Help, please!

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100668-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102448-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-90955-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  Judging people, see if they install.

• Impossible to update after reinstalling Windows 7

  I have a computer Dell XPS 8300. When I bought the computer I bought a reinstall of Windows 7 Ultimate SP1 64 bit DVD with key code. I upgraded the computer to Windows 10, but repeated difficulties experienced with the installation of the updates. The last update, I have installed produces a blank screen on the computer. I decided to replace the two hard drives in this computer with the 1 TB SSD.   I replaced the drive and reinstalled Windows 7 Ultimate. Everything except the Windows Update works fine. I'm unable to update this computer.  When I click on update Windows I get update with scrolling green picture screen in the toolbar icons, but nothing happens.  I'm not worried reinstalling Windows 10, given the problems that I had.  Dell says that this computer has not been tested for compatibility with Windows 10.

  I was surprised that Windows 7 has made request not to be activated after installation.  I right click the Start button in Windows and selected properties, but there was no indication that I need activate this version of Windows 7.  I have the key code and I did not change the motherboard. I don't understand why the Windows Update program does not work, or what I can do to solve the problem. I wonder if it has to do with the fact that I was unable to activate Windows 7.  I tried the Windows 7 update problems difficulty in the Windows Control Panel without success. Someone at - it solutions to this problem? Thank you for your help.

  See:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375

  Best regards, VZ

• My computer is slower after reinstalling windows 7

  A few days ago, my computer starts not up to scratch the windows recovery options helped, so I decided to reinstall windows 7.

  As soon as he finished, I installed all my drivers from the manufacturer and ran windows update several times so I'm sure that I have all the necessary drivers.

  but for some reason, my computer is SLOWER, it was before the reinstall, you would think it would be faster? I have no idea what is wrong, for a bit, I thought it was Skype causing the lag but after that uninstall and restart my computer that wasn't even the problem.

  The disc is not erase the disc itself.  You do this by removing all partitions up to unallocated space, as I said above.  If this has not been done so installation is not really clean.

  But there are many other tips and optimizations in Clean reinstall Windows 7 that all add to the best installation possible.   So I'd go on to see if the system can be improved.  If this isn't the case, you might want to start over with a clean slate.

• How much time after reinstalling window 7 32 Home Premium it take before that receive updates?

  * Original title: update Windows 7

  How long after reinstalling window 7 32 Home Premium does it take before that receive updates.

  Should be immediately the minute that an Internet connection is detected. I would advise that you install updates Windows Update batch well. There are about 300 post SP1 updates, more if you have reinstalled the version Windows 7 RTM.

  My recommendation would be to install updates in batches, these 5 at a time, exclude the hardware/driver updates. Avoid installing a set of updates for Microsoft Windows and Office at the same time. Also, try to install the first small updates. Avoid installing things like the .NET Framework and SQL Express updates.
  Whenever you install updates (it's a chore, but it guarantees a more reliable experience). Try to start the Microsoft Office updates for programs such as (Word, Excel, Outlook, PowerPoint).
  Another thing, try to download the updates, and then install them. When you are prompted to restart, disconnect from the Internet and restart your computer.
  To proceed with the installation of additional updates.
  If the continuous computer to become unresponsive, try the following:
  
  You can reset the Windows Update components by running the Fixit on this page.  But if there is malware present, she will continue to reset the connection to the update servers:
  How to reset the Windows Update components
  http://support.Microsoft.com/kb/971058
  Suggest you download and save the Fixit.  Then configure the system before the clean boot by running:
  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
  http://support.Microsoft.com/kb/929135
  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously.  Now run the Fixit and choose the default mode.  Restart once it's done and see if the system can be connected to the update servers.  If he can't, then rerun the Fixit and choose aggressive mode.  Turn it back on when he finished the race and updates.
  I suggest before you stop and install the updates, disconnect from the Internet, first.

• I get the message "Windows is not genuine" after reinstalling windows

  4 years ago, I bought my laptop (HP ProBook s 4310) with Windows 7 pre-installed, without any disk. A month ago, I formatted my HDD and reinstalled windows. First of all, I found my key windows (using "magical jelly bean"), then downloaded an iso of Windows 7 from Digital River, installed and used my previous key.

  Now, I get this non-genuine message. Since I initially bought windows and that the seller does not gives me any drive, I think not that I did something wrong. Someone knows a solution to this problem?

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press F8 on the keyboard until the Advanced Boot Options menu appears on the screen.

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

• No audio device or after reinstaling windows xp volume control

  I reinstalled Windows XP on Inspiron B120 my daughter because she got the blue screen of death.  I finally understood how to get the wireless working and I thought everything was OK.  Today I asked him if his cell phone was still used and she told me the volume had disappeared from the taskbar and she had no sound.

  When I go into Control Panel configuration/sounds and Audio devices / Volume, everything is gray and it says 'no audio device'.

  I tried Dell Quickset, but unfortunately it didn't there nothing to bring back.

  I don't want to have to reinstall Windows XP again because of all the problems that I had to get access to the Internet after last reinstallation.  But I think there may be something I can correct if I or someone else, can understand it miss me.

  Any help would be appreciated.