Satellite L655-S5107 - no battery detected after installing Win 8.1

Similar Questions

• Satellite A300D - 14 p - no sound after installing Win XP

  Hello

  I just intalled XP and everything works fine, just a problem with the sound.
  I instaled driver sound and sound is very high up with no bass, I didn't have this problem when I had VIsta or Win 7 installed, it must have something to do with drivers.

  My windows is established to date, have SP3 and everything works perfectly.

  What should I do?

  Thank you!!!

  Nikola

  Hello

  I had the same problem.
  But I could solve this install Win XP fixes needed.
  You must generally 2 patches:
  AUDIO patch 1: KB835221
  AUDIO patch 2: KB888111

  But these fixes are also part of the SP3.
  So if you have previously installed SP3, you don t need other patches.
  Bu the point is that SP3 must be installed before installing the audio driver.

  If you have already installed the sound driver then delete the system.
  Go to Device Manager, then remove the sound card from the list of devices and all devices high definition.
  Restart the device and then reinstall the audio driver.

  This is beneficial because it has helped me too.

• Satellite L50-A01Q - WLAN not detected after installing the Atheros WLAN driver

  I have a C50-A01Q. I recently replace the hard drive for an SSD. I installed Win8.1 via a DVD downloaded from Microsoft. I also installed the Download Driver Atheros Wireless LAN from Toshiba. However, the system does not recognize the WLAN. Someone reinstall windows 8.1? How did you get the driver?

  Maybe your laptop has a Realtek or Intel WLAN card inside. Specification of your laptop does not for me so I can't say with certainty what WLAN card is inside.
  Try to install other drivers and check in Device Manager.

• Satellite Pro C850 - WLAN call default after installing Win 7

  Hello

  I own a C850-1 gr (PSCBXE), which comes with Win8.
  I bought Win 7 32 bit Home Premium and reinstalled from scratch.
  Later I installed the drivers from toshiba support page in the following order:

  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  ATI HDMI Audio Driver
  HD SRS Premium Sound Technology
  Synaptics Touch Pad Driver
  Realtek LAN Driver
  Realtek driver LAN wireless
  Intel Wireless Display
  Filter driver package Realtek Bluetooth
  Bluetooth monitor
  Intel USB3.0 driver
  Realtek card reader
  TOSHIBA Value Added Package
  Sleep TOSHIBA utility
  TOSHIBA resolution + plug-in for Windows Media Player
  TOSHIBA Media Controller
  TOSHIBA Media Controller plugin
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  PatchFiles PCIIDEREG - 1.2
  PatchFiles

  When installation is complete, WLAN fails after reboot, alternating.
  This means:

  * First boot: WIFI OK *.
  * Second startup: WLAN failed *.
  * Third start-up (= first boot): WIFI OK *.
  * Fourth Starter (= second boot): WLAN failed *.
  *...*
  * and Yes guess

  Lack of resources, the WLAN icon is displayed for a few seconds, then "no network" icon.

  Any help is greatly appreciated.

  Hello

  Your order of installation of drivers contains the Intel WLan driver.
  But the laptop Satellite Pro C850-1 GR was equipped with the Realtek RTL8723AE WLan/BT combo card.

  I think that you need to uninstall the Realtek WLan driver and WLan Intel driver.
  In addition, you must pay attention to the functionality of BT.

  The card is compatible with the BT and you need to install the driver Package Realtek Bluetooth filter before installing the battery Toshiba BT.

  In addition, do not forget that this WLan adapter is enabled by using the FN + F12 (or just the F12)

  Finally and above all do not forget WHAT BIOS the dafault value

• Satellite A100 - can not use Wifi after installing Win 7

  Hello

  I have a laptop Toshiba A100 of broadcasting.
  After 4 years of use, he was once hit by attack of virus and after detection, I got my laptop to format.
  and now, Windows 7 Home Premium has been installed (originally my OS is Windows Vista).
  Now I'm not able to use Wi - Fi.

  Please suggest me the procedure I need to follow in order to access wireless networks.

  My machine configurations are:
  1 GB of RAM
  HDD of 80 GB + 500 GB external support
  WINDOWS 7 Edition Home Premium
  1.6 GHz FREQ.

  Hello

  Have you installed the driver Wlan?
  The wireless network adapter is visible in device-> network cards Manager?
  Check it!

  In addition it s interesting to know if you are able to activate the WLan using FN + F8?
  If you will not be able to do so, you must install VAP (value added package) and Flash memory card Support utility.
  Check these two tools that have been published in Satellite L500 driver download area

• Satellite click on Mini - some problems after installing Win 10

  Hello
  I hope someone here could help me
  I have a Mini click and I decided to install windows 10. First error
  During installation, I decided to replace the partition recory (2nd error)
  After the installation, I have observed that no update was possible, after 2 months, I decided to restore the system (3rd error)
  During the restore process in windows (only 71 percent) 10 = off work because of missing files
  So my Mini click is released
  I called 3 times to support (with no success) and this morning call center tell me to go to a special website to have a system restore USB
  PROBLEM = they ask me to pay for the key to restoration of toshiba
  I want only the files ISO and no way to have this file in the toshiba support site
  After 3 errors, click no way to recover my Mini, or only with money (even if my product is up to garranted! Amazing)
  And in the forum to write my message, my IE session was broken both times... Of course, I'm on the toshiba site and I use another toshiba satellite to write this message
  I think that my BBIIIIIIIGGG mistake was to buy a toshiba product...
  So if you can help me it will be good for me and for my budget... :-(

  Posted by bilou24an199
  

  Hello
  I hope someone here could help me
  I have a Mini click and I decided to install windows 10. First error
  During installation, I decided to replace the partition recory (2nd error)
  After the installation, I have observed that no update was possible, after 2 months, I decided to restore the system (3rd error)
  During the restore process in windows (only 71 percent) 10 = off work because of missing files
  So my Mini click is released
  I called 3 times to support (with no success) and this morning call center tell me to go to a special website to have a system restore USB
  PROBLEM = they ask me to pay for the key to restoration of toshiba
  I want only the files ISO and no way to have this file in the toshiba support site
  After 3 errors, click no way to recover my Mini, or only with money (even if my product is up to garranted! Amazing)
  And in the forum to write my message, my IE session was broken both times... Of course, I'm on the toshiba site and I use another toshiba satellite to write this message
  I think that my BBIIIIIIIGGG mistake was to buy a toshiba product...
  So if you can help me it will be good for me and for my budget... :-(

  Wow the GUY you described exactly the same problem as me...
  If anyone can help that would be great.

• Re: Satellite A200 Touchpad work scroll dosnt after installing Win 7

  When I change my windows XP to 7 w my scroll dosen t work.
  What should I do?

  Sorry for my English...

  Hello

  You must install a compatible touchpad driver.
  Choose the Satellite L500 on the European driver Toshiba page.
  Here you will find 2 touchpad Win 7 drivers; Alps Electric and Synaptics.

  Both must be installed!

  Welcome them

• Satellite Pro A10 PSA15E: NO sound after installing Win XP

  Hello world

  I had to reinstall Win XP Home - which went well, however - now there is no sound and it says no audio device is installed. I tried to install the audio drivers on the Toshiba CD but they go as far as unpacking but then say "not installed" and Setup stops.

  I went to www. support. Toshiba.com and follow the menu to identify which drivers to download? but there are several possibilities for the
  Model A - 10 and I am not sure I have listed below models have.
  A10-S100, A10-S1001, A10-S127, A10-S128, A10-S129, A10-S1291, A10-S167, A10-S169, A10-S1691, A10 S177, A10-S178.

  I would be grateful for your advice.

  Thank you

  Andrew

  @mrafowler

  > I went to www. support. Toshiba.com and followed the menu in order to identify which drivers to download, but there are several possibilities for model A-10

  What you mean? On the European driver Toshiba page, you will find only one series Satellite Pro A10.
  Once again; Do you have a computer or a Sat Pro A10 laptop satellite A10?

  There is a driver of sound for a portable Pro A10. This is a version of audio driver Analog Devices 5.12.01.3542.
  If you are using XP SP2 please check the information provided on the page of the driver Tosh

• Satellite NB10-A-10V: unknown device after installing Win 7

  Hello forum,.

  I have installed Win7 in my brand-new NB10-A-10V.
  This was made possible thanks to BIOS 1.60.

  I can say that everything works OK and have found all the familiar features and behaviors provided by Win7.
  But the Win7 installation is not perfect yet; There is a missing driver, as reported by the Device Manager:

  * ! * Coding/decoding +(sorry my Win7 is the French version) PCI controller +.

  His ID is PCI VEN_8086 & DEV_0F1

  I do not know what is controlled here, since as I said I did not notice a problem with my NB10 or Win7.

  Can someone tell me what is this + controller +? And just for the sake of pleasing the Device Manager, can someone point me to the missing driver?

  All the best, Matitic

  According to the PCI database http://www.pcidatabase.com/ news
  The ID of FRI (seller) means 8086 and ID DEV (device) appears to be related to the chipset driver or USB driver

  Both are on the page of the Toshiba UE driver

• Satellite A300: Light does not work after installing Win 7

  Hello

  I've recently updated my notebook from windows vista to windows 7.
  My touch buttons work perfectly and the light up for a second when I touch them.

  Only, I can not find how do I turn on the lights of the touch buttons all the time.
  Sombody can you please tell me how to do this.

  Thank you

  Hello

  Have you installed the additional package of value VAP for Win 7?

  Value added package controls Toshiba command buttons and this will help you solve your problem

  In addition, you must know that you can turn on and off lighting in the BIOS.

  Check too!

• Satellite A300 - 9 pm - no reaction after installing Win7 cooling fan

  After Installing Win 7 on this CPU fan stop turning at all.

  Thus, when usage intensive pc shuts off due to the weather.

  I've been try bios update didn't etc no efect.

  Any idea?

  Hello

  It's very strange.
  Have you tried to reinstall Windows 7 again?
  I recommend you to repeat the installation of the OS!

  After installing Windows 7, you must install all the driver Win 7 and tools such as value-added package that is essential for Win 7

  Last but not least go to BIOS (F2) and set it to default settings!
  Save the changes and exit the BIOS

• R850-14 t - FN feature satellite lost after installing Win 7

  Hey,.

  After Installing Win 7 32 bit, I had no functionality of FN.
  I tried to find and also tried some drivers on the homepage, but I don't have the right one.

  If some know what driver I need exactly?

  Thank you!

  Hi mate

  Did you install VAP (value added package)?
  If this is not the case, to do this. After that, restart the laptop and check the functionality of the FN button.

  If the FN button would not work, install utility Support Flash Card which you could find in the box driver for other portable computer laptops; for example L500

  Greetings

• Can satellite A300d-16W - I use HARD drive recovery after installing Win XP?

  I formatted my PC and installed XP. Can I reinstall Vista using HARD drive recovery?

  > I formatted my PC and install XP

  No, you cannot use the recovery HARD drive after installing Win XP because looks like you have formatted the HARD drive and the HARD disk partition has been erased.

  So you need to use the Toshiba Recovery disk that I hope, you created before you formatted the HARD drive.

  Greetings

• Satellite A200-1AX: card reader SD and BT do not work after installing Win XP

  Hello

  About a year and a half, I bought my laptop Toshiba Satellite A200-1AX and I'm very happy with it.
  It had Vista on it. For this OS, my SD slot worked, but I don't know the bluetooth because I don't use it.

  Some time passed and I removed Vista and now I have Windows XP with sp3.
  All right, but the SD slot does not work. Bluetooth does not work as well and it is not listed in Device Manager.
  I tried Toshiba Bluetooth stack, and when the installation reaches the driver part it does not move.

  Here's a screenshot of my device manager:
  [http://img22.imageshack.us/my.php?image=devicem.jpg]

  Those with question marks is not supported by XP as I know, correct me if I'm wrong.

  Hello

  Satellite A200-1AX belongs to the PSAE6E series.
  It s equipped with BT module so after installing battery BT BT should work correctly, you need to activate using the FN + F8 keys.

  Regarding the housing of card reader SD;
  You must install the Flash Media Driver for Texas Instruments. This is the driver for the Bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  By the way; the BIOS must be updated after the installation of Win XP. There is a version of BIOS (5, 60-WIN right now) that is specially designed for Win XP

  Good bye

• Satellite NB10t-A-101 - USB works after installed Ubuntu 14.04

  Hello!

  After installing ubuntu with the process that you gave to me
  (here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=76813)
  and after a few days of use without problem, my USB port have been disabled.

  You have an idea how to deal with to bring them back?
  If you want any information that will help you, just ask.

  Thanks for the help

  With the USB mouse connected, open terminal and enter: lsusb

  You see the mouse?

  In addition you can wear the battery for at least a minute properly deliver material. Then put back the battery and check if the USB ports are not working.

  Last but not least, you could try to start the device using Live didk/USB to see if the problem is still there.